SMN204

Blask Square - Turbine Duke Black Square modeled the beta range of the propeller lever as automatically engaging at a throttle position of 15 percent. Is there any way to adjust the throttle axis to remove the beta range that activates the reverse at a throttle position less than 15 percent ? I have a Thrustmaster HOTAS WARTHOG Throttle. Video of throttle movement when moving the levers of my HOTAS WARTHOG Throttle from min to max. There is no physical detent on the axis! And when I set the throttle to the minimum position I expect to get IDLE, but I get REVERS! Trying to adjust throttle axes in FSUIPC did not give any result.... I want to have idle when I set the throttle to minimum! Not reverse! Is this possible with the axis adjustments in FSUIP? And why when I press "SET" in the axis adjustment window and do not adjust anything - the OUT value is always "-4096" and not "-16384" ?

I "cleaned up" the ini file following your recommendations 👍 For all PMDG 737-800s - now like this: [Profile.PMDG 737-800] 1=PMDG 737-800 For all Piper PA-24-250 Comanche: [Profile.Piper PA-24-250 Comanche] 1=PA-24-250 Comanche

I got it, thanks. But the problem with "A2A Piper PA-24-250 Comanche" was when there was only one profile, it's now two...

I haven't changed anything there for a month since I started flying this airplane. And now I didn't change anything there, just added a second airplane. It looks like some ghost was near me and did something there .... :-))

Everything as usual... stay on RW and tried for about 2...3 minutes or more.

FSUIPC7.ini FSUIPC7.ini

Hmmm.... went back to the old airplane (7.3.25) - everything is OK !

I never had this problem ( and I don't have it now, I fly this airplane with a different livery...:-). I'll try with the old one now....

Here are the logs (they are named "prev", I think they are related to the problem) FSUIPC7_prev.log FSUIPC_WASM_prev.log

Hi! FSUIPC 7.3.25 What could have happened? I start (before that, an hour ago - everything was without problems) "Piper PA-24-250 Comanche" and..... no response to FSUIP assignments! FSUIP is started as usual (FSUIPC7: Simulator is available: Connected), in FSUP settings window (Buttons & Switches) it reacts normally and presets are displayed in "Control set when button is pressed" window Rebooting MSFS - the same thing. Rebooting PC - the same. Making presets again - everything is done, but no reaction in the airplane! I choose a new livery for the same airplane, create settings based on this and... everything works ! Very strange, especially since an hour ago everything worked without problems.Very interesting - what could be the reason? Here is a "part of the log" ...., as I think, related to this problem. 3110 Simulator detected 128125 **** SimConnect open event not received in required time limit: Re-connecting now... 248344 **** SimConnect open event not received in required time limit: Re-connecting now... 325500 SimConnect_Open succeeded 325500 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 325500 MSFS version = 11.0.282174.999 326156 Initialising SimConnect data requests now 326156 Offset file 'C:\FSUIPC7\myOffsets.txt' not found (info only) 326156 Mapping custom control numbers 69632 - 84232 326172 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents) 341125 User Aircraft ID not supplied -- trying default 341781 F:\Game Setup\MSFS 2022 Install Packages\Community\a2a-aircraft-pa24\SimObjects\Airplanes\pa24-250\aircraft.CFG 351188 Aircraft loaded: running normally now ... 351594 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents) 351594 Aircraft="A2A Piper PA-24-250 Comanche N8351P" 351610 System time = 16/11/2023 17:01:46, Simulator time = 13:01:45 (14:01Z) 351610 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '0 (>L:LandFlapsPos, Number)' 351610 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '1 (>L:Battery1Switch, Bool)' 351610 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352141 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352188 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352235 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352281 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352328 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352375 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352422 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352469 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 352516 [ERROR]: Error setting Client Data Calculator Code [-2147467259]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404578 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404610 [ERROR]: SimConnect_RequestClientData for config failed!!!! 404625 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404672 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404719 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404766 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404813 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)' 404860 [ERROR]: Error setting Client Data Calculator Code [-1073741648]: '(L:NavInstrLightSwitchPct, percent) 10 + 100 min (>L:NavInstrLightSwitchPct, percent)'

FSUIPC7 7.3.25 Why I can't I find the presets for A2A Simulations "Piper PA-24 Comanche 250" ? On https://hubhop.mobiflight.com/presets/ they are there! But in FSUIPC7 7.3.25 I can't find them anywhere.... neither in the general list nor in presets:-( P.S Perhaps the reason is the date of adding presets to the site https://hubhop.mobiflight.com/presets/ - 14.11.2023 Then look forward to the FSUP update !!!

Is it possible to change the auto-start delay time FSUIP7 after MSFS startup?

Yes! Just the visuals are not working! The operating modes are switched

Fenix A320 When I select Autipilot any knobs PULL/PUSH - they does not work in Sims Example - selecting:

Hi! I have FSUIP7 for MSFS 7.3.15 installed. I updated it by replacing FSUIPC7.exe (7.3.16b) from here. Do I need to reinstall FSUIP7 to upgrade to the new version 7.3.16 or not? And in case of a new installation - will my button and axis settings remain the same?

Yes, it is!

I use mostly one profile (I fly one plane). Every time I start MSFS, I have to minimize MSFS to tray, open FCUIPC7 and mark here... Is it possible that this profile is loaded automatically when I start MSFS?

Hmm... This "PMDG B737 Eng1 Reverse" preset is not here (I can't find it...)

Where can I find a list of all of the available presets? To find the one I need. In the list that is in the program - no search