johnliem

Thanks for your help Pete, I will next time.

Hello Pete I need a little help, I add text in FSUIPC.ini [Programs] RunIf1=READY,CLOSE,H:\1FSGUX\AS_P3Dv4\AS_P3Dv4\AS_P3Dv4.exe with this it works soon P3DV4 start after that the AS_P3Dv4 start as I want it, and I add another text as shown below RunIf1=READY,CLOSE,c:\P3D 4\FS-FlightControl\FS-FlightControl.exe but the program does not start, my question is how can I or it is possible to add another program to run after the first program start, and which option do I need to use when P3Dv4 closed also the program I start in this ini file also close , thanks

Hi Pete I am using FSUIPC version 5.121b, and yes that is what I wanted to know, and you mention that the profiles don't apply to the other option tabs, so it clear for me, thanks

Hi Pete I made a profile for each aircraft I use, when I start the Sim with PMDG 777 for example and then I open the FSUIPC , in the top of the FSUIPC GUI I do not see that the profile of PMDG 777. is this normal? and when I open the ini file, I see the profiles I made, I do not have any issue with all the assginment, just wondering if that is normal that I do not see the profile name as I mention above thanks

Thanks Pete, I have done it works, super.

Hello Pete simple question, can I use or copy the ini file from FSUIPC 5 to 4, thanks.

I am not sure about this because why FSUIPC detect as you mention above , because when I open FSUIPC and go to buttons and I press any key on the the OrbWeaver there is nothing ditected by FSUIPC But the reason for that is presumably the same reason that there's no button seen on anything else. so the OrbWeaver has it own software indeed, its called Razor Synapse. via this software I can assign every hotkey I made in FSUIPC via the the OrbWeaver keypad, instead of pressing the button on my joystick or my yoke. So you aren't worried about not seeing buttons after all? I am really confused now. as it is solved now and Not that it matters now just to make it clear about the button, I think you are still confused about it , again Not that it matters now the issue was really when I still have the issue when the Orbweaver is connected, all the buttons I assigned from the Joystick and the yoke, they did not work(when the Orbweaver is connected ). it has nothing to do with the buttons of the the Orbweaver what so ever. It is not a hope but it works fine now. So, problem solved? yes it is solved now. again thanks Pete cheers Johnliem.

No buttons? It seems t be telling DirectInput that it has 24 buttons, and 6 axes (RUVXY and Z), here: Details: Btns=24, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V255,X255,Y255,Z255 So how are these assigned? I am not sure about this because why FSUIPC detect as you mention above , because when I open FSUIPC and go to buttons and I press any key on the the OrbWeaver there is nothing ditected by FSUIPC, and I do not assign anything in FSUIPC with the the OrbWeaver, the reason why I want to be able to use the the OrbWeaver because every button which I assgined in FSUIPC as you can see in the ini file, I assgined them with a hotkey in FSUIPC like for example Shift+ K for a button. so nothing assgined with the Orbweaver. so the OrbWeaver has it own software indeed, its called Razor Synapse. via this software I can assign every hotkey I made in FSUIPC via the the OrbWeaver keypad, instead of pressing the button on my joystick or my yoke. * It sounds like there's some software being run for the OrbWeaver which is seriously interfering with everything else. Do you know about any software? Howdo you configure this "keypad"? see * Sorry, that seems to be contradictory. You say: "it works ;-) all the buttons work with the Orbweaver connected" but then "I will give it a go if I hope this really work"! Which is the truth? It works or you hope? it is not a hope but it works fine now. I'm not sure about that "Power Options" picture you showed. Maybe it is different in win10? The USB power management I'm talking about is in Device Manager, in the "Universal Serial bus controllers" section, and in the Properties (right click) for each entry described as a "Hub". sorry about the power option, I was miss understood about it, see print screen, it is the situation at the moment I do not changed any. what I changed only like the first pirntscreen of the power option. Did you also try what I asked, i/e: What about if you go into the FSUIPC options, Buttons or Axis assignments tabs, and select the "reload" button? Do they work then? when the first state that did not work, by doing as you asked me to do into the FSUIPC options, only Axis assinments works, not the button, but now all the buttons are working.

HI Pete sorry to make you confuse I should say that only the axis work okay when the Orbweaver is connected, because I use the axis assignment from my Rudder. so in this case I do not have any issue with axis assginment only with the buttons when the Orbweaver is connected,, and the Orbweaver is a keypad which has not axis at all What about if you go into the FSUIPC options, Buttons or Axis assignments tabs, and select the "reload" button? Do they work then? when the Orbweaver is connected, as I do not have an issue with axis they work and again when when the Orbweaver is connected I reload for button, there is no reaction when I press any button ( when the Orbweaver is connected,) eventhough there are no the buttons work , I still can use the Orbweaver as a keypad. And what happens when you connect the Orbweaver later, instead of having it connected at the start? Everythng carries on working pus the Orbweaver? when Orbweaver connected later there is no problem with the buttons. Are all the devices connected to separate USB sockets on the PC? Or are they on a hub? A powered hub? they are connected to separate USB sockets on the PC, and I have treid to connect the the Orbweaver to a diffrence socket on the PC already, but no luck. Can you check in the Windows Device Manager that power management is disabled (i.e. no power saving) on each USB hub or other USB devivce which has that tab (it'll be in the device properties if it is there). well, it is maybe the answer of this issue, I check as you asked me to do about the power management and it was enable and after I disable it see printscreen, it works ;-) all the buttons work with the Orbweaver connected. I will give it a go if I hope this really work, if you do not hear anything about this, it means it is over, solved. really apprciate it your support and help to solve this silly issue, thanks Pete.

Hi Pete Thanks for your quick reply But these details show that even with the Orbweaver connected, FSUIPC still rcognises and assigned these devices: I did not say that Orbweaver not recognise by FSUIPC , but this Orbweaver cause all the buttons do not work, that is why I was asking if it is possible that FSUIPC will not detect the Orbweaver. There's not going to be any change if that device isn't there or added later. Even the assigned Joystick numbers look the same as those used in your assignments, though with so many devices I think you should enable JoyLetters so that your assignments still work even if the Joystick numbers change. How can I enable JoyLetters? What do you mean by "the other buttons"? Are you saying some assigned buttons work and some don't? yes, only the button from the yoke still working when Orbweaver is connected Are you testing with a default aircraft, or the PMDG? Test with default. I test with default aircraft and the PMDG Just looking at your default assignments, you have buttons assigned to joystick IDs 1, 2, 3, 4 and 5. (See the list of devices above to see what they are). You don't have a Joystick ID 2, but i see you have alternative assignments in any case: yes I have some alternative assignments in this case Do the axis assignments work okay? You've only mentioned buttons. only the axis work okay with the Orbweaver

In what way does it "block" buttons. when this keypard plugged and then I start the P3D all the buttons I assign to in FSUIPC do not working anymore, except from the button from the Yoke, but when I unplug this device and start the P3D , there is no problem as logicly that FSUIPC does not detect it. FSUIPC does not finds and assigns the other buttons, and they don't work, I think that was one of the devices known to cause problems and which were eliminated. If it isn't then I think maybe it is masquerading as a joystick device? You attach a log showing a good session which does not feature the extract you show above at all, so it is really of no use at all. 1. Try with FSUIPC 5.103e, now available in the Download Links subforum. I downloaded it and still the same issue 2. Supply a log showing the problem, NOT one showing everything good. 3. Also show the FSUIPC5.Joyscan.csv, which is a concise summary of the scanning results. 4. Download HidScanner from the Download Links "Useful Additional Programs" thread, run that, and supply its log too, please. FSUIPC5.ini FSUIPC5.JoyScan.csv FSUIPC5.log HidScanner.log

Hello Is it possible to disable a ditected device in FSUIPC, I have an issue one of my device which is ditected by FSUIPC, its blocked all the buttons I assign in FSUIPC, when this device is unplugged before I start P3D and then I plug in the device all the buttons work just fine, so that's why I would like to know if this is possible to disable a certain device in FSUIPC this the information I see in FSUIPC log file 219 Device acquired for use: 219 Joystick ID = 5 (Registry okay) 219 5=Razer Orbweaver Chroma 219 5.GUID={04F942D0-3954-11E7-8010-444553540000} FSUIPC5.log

Hi Thomas, I figure it out, why this happend it seem that my extra keypad Orbeaver chroma cause this issue, well the solution is just unplugged the Orbeaver chroma first before I start the P3D and then plug in, well for the time being I am quite happy to do this action, but my question is, is there a solution to fix this problem? FYI this Orbeaver chroma cause also P3D Version 4 to start, but after the last hotfix, the issue is solved , and I can start P3D with Orbeaver chroma connnected, this the text from P3D Fixed a crash on startup due to controllers using bad port and hub values thanks for your support so far. see the log file which 109 Product= <not readable at this time: maybe device disconnected?> 109 Vendor=1532, Product=0207 (Version 1.1) 109 GUIDs returned for product: VID_1532&PID_0207: 109 GUID= {04F83160-3954-11E7-800E-444553540000} 109 Details: Btns=3, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 109 GUID= {04F683B0-3954-11E7-800C-444553540000} 109 Details: Btns=573, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 109 GUID= {04F9B800-3954-11E7-8011-444553540000} 109 Details: Btns=24, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V255,X255,Y255,Z255 FSUIPC5.log

Hi here is the log file you asked me to send. HidScanner.log

Thanks for quick respons Thomas, FSUIPC5.ini FSUIPC5.JoyScan.csv FSUIPC5.log

Hello Pete I use FSUIPC5 for a couple weeks, suddenly FSUIPC5 does not detect my joystick and all the buttons, the only FSUIPC5 detect is my rudder which I use the axes assignment, I use joystick Hotas Warthog and the rudder, yoke and Rudder from Saitek, what I have done so far, I delete the file under module and reinstall it, but still when I start P3D Version 4 I can only use the Rudder and no buttons , can you tell me what I have done wrong ? thanks

No one?

Hello Merry Chirsmas 2015, Just wondering if there is someone use this keyboard (Corsair Gaming K95 Mechanical RGB Gaming Keyboard), I would like to ge it, but to make sure if the extra keyboard on the left hand side also can use in FSUIPC. thanks . John

Ok thanks for the explanation , and about there is no way to cut out either without correcting the situation, it is not to cut out , just to silince the sound as I press on that spot I mention before, and of course I am aware that I have to correct the situation, but strange enough I can silence it by clicking on the spot. but thanks anyway, I will see if I can find at PMDG.

Hi Pete master caution for PMDG 737 or 777 it happend when overspeed on the air or wrong flaps config the master caution will ringing before take off, when it happend or ringing I just click on the spot of master caution with the mouse and it will silence, so I thought it will be nice when I assign a key of my joystick (thustmaster Hotas Warthog) via fsuipc. John

Just wondering if anyone can give me a hint, what is the name of the command in FSUIPC to silence a warnng sound or (master caution switch) not the ordinary sound as (Q) but the warning sound, because I have been searching at the FSUIPC it self , I could not find it ( I am registered user of the FSUIPC) thanks.. John

wide server.ini ********* WideServer.DLL Log [version 7.827] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 18/05/12, Time 17:33:02.395: Server name is JOHNUK-PC 15663 Initialising TCP/IP server 15663 Initialising UDP/IP server 16131 Broadcasting service every 1000 mSecs

Hallo Pete I can see title bar 'Waiting for Clients', on fsx, and I start the Wide client on the other computer , I used to be able to connect to the fsx but now since the udate , I can not connected to fsx from my other computer what should I do? by the way I am registerd user for FSUIPC and for the WIde FS