Jump to content
The simFlight Network Forums

Tozzifan

Members
  • Content Count

    82
  • Joined

  • Last visited

Everything posted by Tozzifan

  1. Hello, I am sorry for missing the search: I've reinstalled P45, with UTLive and your Simmarket sounds package as well It's passed an amount of time since last reinstall, so forgive me if I forgot the answer: is it possible to lower the GA sounds volume, so that airline engines are heard as much louder than the former? thanks
  2. I've checked the list of keyboard commands in the load manager, I'm sorry, yet I cannot see a HUD toggle command I've also checked the .ini in the aircraft folder...
  3. Hello, I've just repurchased (for p3d4) your product (Simmarket): I cannot find how to change the default >w< HUD key, because it is already set for EZDOK use (I'm sorry, I cannot find it in the manual) thanks
  4. nevermind, after looking into the UTL boards inside the sim (not the one in the main interface), the timetables match, so it was a matter of setting the clock on the main interface
  5. [p3dv42] Hello, I've just flawlessly installed UTL - I had formerly activated MT6, via the add-on.xml procedure, so before installing UTL I deactivated MT6 in p3d/option/addons - then I updated STB with the P3d4.2 update - then I relaunched the STB setup wizard, making STB to acknowledge and setup again for the new AI manager; no faults happened in p3dv42, UTL appears to be working normally, yet it is not displaying the same flights as STB: it appears that the planes active (taxiing and landing) are actually the ones depicted by STB, and not the ones represented on the UTL boards; there is not even a single flight number match so I am asking for help, because I could not find any answer in the forum or the manual, about this mismatch thanks
  6. p3dv3, same issue, a year later, yet I remembered this thread just passing by to check the replay again and say thanks for the solution, although a little late :-)
  7. Hello, I'm downloading AU and NA Orbx General Aviation freeware AI files (https://fullterrain.com/freeware/ai), because I have a few GA Orbx airports and I'd like to see them alive as bigger airports are with MTX6 please, as I did not understand searching and reading FAQs (sorry, life in a hurry, maybe), whether installing those two freewares might hamper MTX6 good reasoning, even whether an additional AI is fully necessary after MTX, by the way :smile: thanks
  8. (MTX 6.0a, Simmarket's Pisa) Hello, either on p3dv3.2 or FSXSE, this airport activity mostly uses 22L runway, instead of 4R - I live near there Please, can I manually change this, or is there something to fix? ... sorry whether I missed the correct reply after seaching Thanks
  9. thanks Airbus FSXSE.rar Airbus p3D32.rar cameras FSXSE root.rar Cameras appdata.rar
  10. So, Simon, just to be sure, because I'm not an expert: should I copy the camera 010 config from cameras.cfg (Appdata/Roaming....) and overwrite the camera 010 config into any aircraft.cfg (the Airbuses, in my case) presenting this issue? or is there else? in my case, if I use Airbus, then every other plane loaded after it suffers the same STB issue, unless I exit P3d/FSXSE; only then STB works again, out of any Airbus so far tried ... might this suggest anything else?
  11. Hello, it happens to me to be in these forums to ask for help in another section a while ago I had a long "conversation" with Alan Constable about how to properly set his sounds in FSX and P3d, yet there were difficulties in checking the goodness of the sounds at fullterrain.com there's a freeware "invisible" pedestrain aircraft called BOB, released just for admire the details of airports...and sounds, btw :-)
  12. btw, is there another way to swith view to the desired flight? the default rightclick-airtraffic way, in big airports, is unusable
  13. Hi, the Aerosoft product is the only aircraft so far showing this behaviour: on the STB interface (either the FSXSE or the p3dv3 one), the doubleclick on a flight or the rightclick-ViewAI do not switch to that flight, but to a view in the cockpit I'm also using Ezdok, yet it does not happen with any other airliner (PMDG 737, 777) or GA aricraft I own, so far ... maybe a Ezdok issue? thanks for any assistance
  14. after renaming trafficAircraft.bgl everything is fine now....just for another FSXSE newcomer
  15. it's getting better: I've added MT6 scenery to the library, and MT6 airliners started to appear, yet there are still a lot of stock airliners around (KLAX)
  16. ......no luck: - MT6 Communicator FSX section is correctly pointed to the root FSX SE folder - fsx.cfg is set for MT6, traffic 35% - FSXSE (Norway ENGM) depicts only its stock airliners (also SupertrafficBoard is seeing only stock traffic)....?
  17. Hi, I'm almost about to switch from a humungous 2008 Box Gold install to a fresh Steam one, and I've started collecting info, for starters from: https://fsxinsider.com/transitioning-from-boxed-fsx-to-fsxse-part-1-fsx-stripback/ I've also searched this forum and manual for details yet, as a happy MT6 user with FSX and P3D, I'd like to have a confirmation that I can backup reusable datas, unistall Box FSX, clean evertyhing up to the registry, install SE, and finally simply point again MT6 Communicator to FSX (not FSXSE), as specified in this forum or is there something else I'm missing? thanks
  18. I've also seen this http://forum.simflight.com/topic/79487-cant-get-rid-of-default-ai-traffic-with-communicator/?hl=orbit the file in question appears as having been renamed at the end of MT6 installation
  19. Hello, I've flawlessly uninstalled MTX 5.4 and flawlessly installed MT6 traffic appears correcly on FSX and p3d2.5, yet this is my initial feedback (Airline traffic 20%): KSFO (viewed via SupertrafficBoard with latest hotfix): there are also depicted the stock Pacifica and Orbit airlines operating (lots of jets, either on STB or on ground), regardless of having disabled the default AI traffic in Communicator (tried two times) I've tried a minor airport (Pisa, I place I know), there there are no stock airlines everything is fine on FSX side just my feedback (I'm sorry whether I've missed the answer) ....
  20. Hi Alan, after all the mail support you gave me, I purchased the traffic3D sounds from Simmarket: at last it is all working hugely fine, and I'm very glad with your sounds thanks Marco
  21. Hi, I'm currently having installed Flight1's Audio Environment X (MyTrafficX) are there substantial differences? are the products compatible? will I have to restore FSX sounds and uninstall AEX, before setting up your utility? thanks
  22. http://www.orbxsyste...c-100-released/ Hi, I'm running MTX 5.3, and before installing that gift, I'd like to be sure that that install won't damage MTX installation, thanks
  23. :) still I'd really like, as I proposed a long while ago, a "screensaver mode" with STB, that is the possibility to view airport activity through automatic adjustable cycling views, on a screen, without touching anything
  24. please,don't think in terms of waste of time, because, in this case, you have shown to me the right direction I've upgraded to 4.70, and the issue hasn't shown anymore this FSX install of mine is one year old, and the only reason for this ancient release installed is that, when I purchased FSC9 two weeks ago (downloading FSUIPC4.7 as well), I searched and installed from my huge FSX library the old release (which I forgot to have downloaded, who knows when) as a sign of gratitude for you support, even on sunday, I've just purchased a licence from Simmarket, although still I have to know what FSUIPC does :mrgreen:
  25. I'm sorry again: the message (when I wrote "mentioned above", I forgot that I was in another section of the forums :rolleyes: )from FSC9 is GPS is "no GPS data from FS available ........ connection terminated" this is the log after the only one successful connection upon reloading (should I resend another log when the no-GPS-connection issue shows again?): ********* FSUIPC4, Version 4.152 by Pete Dowson ********* User Name="" User Addr="" FSUIPC4 not user registered WIDEFS7 not user registered, or expired Running inside FSX on Windows Vista (SimConnect SP1 May07) Module base=61000000 DebugStatus=0 78 System time = 16:47:14 93 FLT UNC path = "\\YODASEVEN64\Flight Simulator X Files\" 93 FS UNC path = "R:\FLighT SiMuLaTor X\" 374 LogOptions=00000001 390 SimConnect_Open succeeded: waiting to check version okay 6879 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 6879 Initialising SimConnect data requests now 6879 FSUIPC Menu entry added 6911 t:\spacetime - seven\flight simulator x files\SafeFSX.FLT 6911 R:\FLighT SiMuLaTor X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 7410 Weather Mode now = Custom 545364 R:\FLighT SiMuLaTor X\SimObjects\Airplanes\PMDG747-400\B747-400.AIR 545364 T:\SPACEtime - SEVEN\Flight Simulator X Files\KIAHEDDF2a.PLN 545364 t:\spacetime - seven\flight simulator x files\US KIAH EDDF 4 cruise.FLT 585253 System time = 16:56:59, FSX time = 05:54:54 (04:54Z) 587702 Weather Mode now = Theme 589902 Weather Mode now = Custom 592585 Advanced Weather Interface Enabled 596891 Weather Mode now = Theme 597016 Weather Mode now = Custom 2144046 T:\SPACEtime - SEVEN\Flight Simulator X Files\KIAHEDDF2a.PLN 2144046 C:\Users\Yoda\AppData\Roaming\Microsoft\FSX\Previous flight.FLT 2155060 System time = 17:23:09, FSX time = 05:54:54 (04:54Z) 2155060 *** FSUIPC log file being closed Memory managed: 852 Allocs, 852 Freed ********* FSUIPC Log file closed ***********
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.