giosuepirozzi

Hi Jhon thanks for your reply…. problem solved! I must to reinstall in PC server the update of Windows11 version 24H2. now all work very fine regards giosue

Hi to all Hi Mr Pete Dowson can you help me? Sorry for my bad Englesh I use one PC server with Windows11, MSFS2020 and last fsuipc 7.5.1, On second PC client with Windows10, I use widefs to connect sioc program I'm having this problem after updating the Windows 11 of PC server to version 24H2.....so when in PC client I run wideclient and boot Sioc.exe in the dialog box of sioc program I read in status section of FSUIPC this message: Maybe running on wideclient, but FS not..... of corse this situation inhibits the functioning of sioc program with PC server I attached my log files Thanks in advanced Best Regards Giosuè WideClient.log WideClient0.log FSUIPC7.log WideServer.log

Hi after updating my prepar3d V5.3 , prosim 3.13b9 and last fsuipc 6.1.6 my motor trim in sioc not run! The last trim motor value prosim (1,-1,or 0) not arrive in sioc..... I use in numerical of prosim in trim motor value an fsuipc offset (16bit S) of service 0x600 to send these values in my variable of sioc but not arrive anything Whit same configuration and previous P3D V5.2 all working very fine The trim motor hardwere run very fin in sioc consol test Can you help me? Regards Giosuè

Hi same problem for me..... I changed in the file.bat the value :: wait for MSFS to start (2mins) timeout /t %delay% /nobreak > NUL to :: start FSUIPC7 start "" "C:\FSUIPC7\FSUIPC7.exe" MSFS running but fsuipc not start...... any idea? regards giosue

All Ok now running very fine thanks for your best support best regards giosue

oK GO AND change these lines...I will informe you of my progress...

Hi Jhon When start icon of fsuipc.bat not receive error from MSFS ..... and this is my file EXE.xml Thanks again EXE.xml

When start icon fsuipc7.bat on desktop....MSFS start and running but fsuipc not running...I must go in fsuipc folder and start manually fsuipc.exe

Hi John thanks for reply..... this is my file.log InstallFSUIPC7.log

Hi to all I have problem with file bat of fsuip7....... when start fsuipc7.bat MSFS start but fsuipc not running.....I waited over 120 seconds but fsuipc not running can you help me? thanks in advanced regards giosue

Thanks Mr John

Hi to all I know that I must to buy new version FsuipcV6 for prepare3d V5.....but for widefs....can I use my key for fsuipcv5? or I must to buy also widefs? thanks Regards Giosuè

Hi Mr Pete Yes!!! Is all true what you read in my log files ! I turned on and off the radar several times !!! thanks again for help me Sincerely Kind Regards Giosue

Hi Pete You are a great MAN after adding two off set that you tell me now radar.bin is 79K Thanks so much sincerely Giosue this is my fsuipc4.log .....can you check for me? ********* FSUIPC4, Version 4.949p by Pete Dowson ********* Prepar3D.exe version = 3.2.2.16659 Reading options from "C:\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 7 Module base=5DAA0000 User Name="giosue pirozzi" User Addr="giosuepirozzi@libero.it" FSUIPC4 Key is provided WideFS7 Key is provided 16 System time = 22/04/2016 21:02:47 16 FLT UNC path = "\\PCFLIGHT\Users\Giuseppe\Documents\Prepar3D v3 Files\" 16 ------ Module Version Check ------ 16 acontain.dll: 3.2.2.16659 16 api.dll: 3.2.2.16659 16 controls.dll: 3.2.2.16659 16 fs-traffic.dll: 3.2.2.16659 16 G3D.dll: 3.2.2.16659 16 language.dll: 3.2.2.16659 16 sim1.dll: 3.2.2.16659 16 visualfx.dll: 3.2.2.16659 16 weather.dll: 3.2.2.16659 16 window.dll: 3.2.2.16659 16 ---------------------------------- 16 Trying C:\Prepar3D v3\Modules\SimConnectP3D3.dll 32 Found it: trying to connect 32 FS UNC path = "C:\Prepar3D v3\" 312 ---------------------- Joystick Device Scan ----------------------- 328 Product= SideWinder Precision Racing Wheel USB version 1.0 328 Manufacturer= Microsoft 328 Vendor=045E, Product=001A (Version 0.38) 328 Serial Number= Microsoft 328 Product= Saitek Pro Flight Rudder Pedals 328 Manufacturer= Saitek 328 Vendor=06A3, Product=0763 (Version 1.0) 328 Serial Number= 328 Product= 5-Axis,12-Button with POV 328 Manufacturer= 328 Vendor=12BD, Product=A02F (Version 1.0) 328 Serial Number= 328 Product= Plasma-MM2 328 Manufacturer= Beta Innovations 328 Vendor=12DA, Product=0920 (Version 1.36) 328 Serial Number= 000 328 ------------------------------------------------------------------- 344 LogOptions=00000000 00000001 344 ------------------------------------------------------------------- 344 ------ Setting the hooks and direct calls into the simulator ------ 344 --- CONTROLS timer memory location obtained ok 344 --- SIM1 Frictions access gained 344 --- FS Controls Table located ok 344 --- Installed Mouse Macro hooks ok. 344 --- Wind smoothing fix is installed 344 --- All links okay (except older global weather setting method) 344 ------------------------------------------------------------------- 344 SimConnect_Open succeeded: waiting to check version okay 344 Trying to use SimConnect Prepar3D 42729 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.2.3.2 (SimConnect: 3.2.0.0) 42729 Initialising SimConnect data requests now 42729 FSUIPC Menu entry added 42745 \\PCFLIGHT\Users\Giuseppe\Documents\Prepar3D v3 Files\Napoli Capodichino.fxml 42745 C:\Prepar3D v3\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air 43337 Monitor IPC:861C (U16) = 0 43337 Monitor IPC:8624 (U16) = 0 93663 System time = 22/04/2016 21:04:21, Simulator time = 21:03:30 (19:03Z) 93663 Aircraft="Prosim_737_800_Alitalia" 94677 Starting everything now ... 94693 ASN active function link set 94693 Ready for ASN WX radar 94693 ... Creating WxRadar binary file as: 94693 C:\ProSim737\radar.bin 95988 Advanced Weather Interface Enabled 124489 Weather Mode now = Theme 147000 Monitor IPC:861C (U16) = 50 147000 Monitor IPC:8624 (U16) = 130 154519 Monitor IPC:8624 (U16) = 2 170353 Monitor IPC:8624 (U16) = 130

Hi Mr Pete I read and read all post that you tell me : http://prosim-ar.com/forum/viewtopic.php?f=13&t=8971 but I have always the same problem I don't see the weather metar on my prosim display! This is my configuration: Prepar3D 3.2 V Last Fsuipc 4949p Prosim737 1.46 Efis + MCP EL cpflight, WXR panel Last ASN I edit in fsuipc4.INI my Prosim folder : ASNwxRadarPath=C:\ProSim737\radan.bin (verified the path many times) When I start all and I'm going in prosim folder I see the radar.bin but is only 1kb (NULL) What do you think about my situation? Maybe new version 3.2 of Prepar3D and Simconnect have a bag?? thanks in advance Regards Giosuè

Exsuse me Mr. Pete it was not my intention to make angry you thanks for give me the information of Prosim best regards giosue

Hi to all Please can you help me?? I would like to see in my PD of Prosim the weather meter of Active Sky Next..... For this situation I must put inside FSUPC.INI the string: ASNwxRadarPath=C:\Prosim737 ?? Naturally my folder Prosim is located in C: and is called Prosim737 It is correct? Thanks all in adance Regards Giosue