Jump to content
The simFlight Network Forums

Camtech

Members
  • Posts

    27
  • Joined

  • Last visited

Everything posted by Camtech

  1. hello peter i have just to say that i finally went to Fsx and its is great, but there are some things that i have noticed or perhaps its just the sim. on fs9 when ever i loaded say active sky , or radar contac it would scroll acroos the top to advise me , but for some reason it is not doing this , im sure there is somthing im missing or perhaps its the other applications thats the cause. i believe i have every thing checked marked that needs to be in your set up section. Thanks...Robert
  2. your right as usual peter got it up and running. Robert
  3. im sorry Peter i did read , but did not quite understand it. i ran the exe and then looked in the module folder and it was there , i also loaded the sim and found the add ons , opened it up and there was fsuipc. it is also registered to me and so is widefs, also it says diaable widefs, and i believe that means it is enabled. so far i believe it is set up correct. where i get confused is do i put the wide client s modules in the secondaery com just like fs9. i did that on the second computer and put them in the folder . and i started it up and it says it is waiting for a connection. everything appears to be correct. ......Thanks
  4. hello peter i have upgraded from fs9 to fsx and i believe i did everything correct. fsuipc shows up in the sim , i installed exe. and i see it in the module section , i also put the widefs server and ini file into the module and loaded the widefs client and ini file onto the other pc. had no problems with fs9 working , but im a little lost on why FSX is not responding. do i need to add something in the ini config section like i did with fs9 . will i need to add the ip address below tje config section of the client ini. thanks....Robert
  5. hello peter im migrating over to fsx and will be downloading your module fsuipc4 and im wanting to know will widefs 6.78 that i have for fs9 work with fsuipc4, thanks.................................Robert
  6. yes peter im embarrassed, my email address was wrong at the back end , it was .com instead of .net. you have a lot of patients and im thankful for that. all is well and have a great day.........Robert
  7. im sorry , what i mean is that i cannot register it. the keys that i got when i bought the software does not work and i have used it it before many times. for some reason it will not accept it. for both fsuipc and wide view. the current software is 3.85 and i upgraded to your 3.90 and my register keys would not work , and then i decided to go back to 3.85 and it still would not work. im sorry if i was not clear.......Thanks...Robert
  8. hello Peter im having a problem getting my keys to register both fsuipc and widefs, i have had these programs for several years and i have never had this problem before. i had to reload and format my hard drive and after i reloaded everything i got to the part of putting in my keys and they will not work. i run FS9 and i was running 3.85 and and i look on your website and saw a newer version and in put that one in 3.90 and it would not take the keys that i had, so i decided to put back in the older version and still i cannot get the keys to work. also i noticed that the digital signature has another name in it and not yours. im sure im not what i might be doing wrong , but im sure i put the keys in correctly, i have done it several times. Thanks.........Robert
  9. Thanks for the reply and sorry for the error in your name . im still must be doing somthing wrong . im not for sure on work group names so i went in and set them up. as far a work group names i name then the same on both computers. (camtech). hers is the log on the client com. ********* WideClient Log [version 6.78] Class=FS98MAIN ********* Date (dmy): 09/02/09, Time 13:25:26.080: Client name is CAMTECH 172 Attempting to connect now 172 Trying TCP/IP host "camtech" port 8002 ... 172Okay, IP Address = 192.168.2.3 1186 Error on client pre-Connection Select() [Error=10061] Connection refused 1217 Ready to try connection again 2247 Attempting to connect now 13182 New Client Application: "AS2004" (Id=2364) 61933 Trying TCP/IP host "camtech" port 8002 ... 61933Okay, IP Address = 192.168.2.3 here is the log on the main com. ' ********* WideServer.DLL Log [version 6.78] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 09/02/09, Time 13:18:03.750: Server name is CAMTECH 86906 Initialising TCP/IP server 86922 Initialising IPX/SPX server 86922 IPX/SPX socket() failed [Error=10044] Socket type not supported 86922 Failed to start IPX/SPX Server 86922 Initialising UDP/IP server 88469 Broadcasting service every 1000 mSecs 98062 Restarting service due to total lack of use 98062 Failed to start IPX/SPX Server 655797 Closing down now ... Memory managed: Offset records: 0 alloc, 0 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* so at this moment im confused on where to go or what to do. i did as your instructions said to do. servername = camtech protocol=TCP that did not work so i tried the ips address. the problem with that is im not for sure where to get that from. Thanks again.....Robert
  10. Hello Mr. Dobson it has been awhile that i have used widefs , and im having problems connecting. first here is my log . this is what im reading from the main computer log ******** WideServer.DLL Log [version 6.78] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 09/02/09, Time 09:55:29.281: Server name is THERMALTAKE 85562 Initialising TCP/IP server 85578 Initialising IPX/SPX server 85578 IPX/SPX socket() failed [Error=10044] Socket type not supported 85578 Failed to start IPX/SPX Server 85578 Initialising UDP/IP server 86234 Broadcasting service every 1000 mSecs 96922 Restarting service due to total lack of use 96922 Failed to start IPX/SPX Server 418969 Closing down now ... Memory managed: Offset records: 0 alloc, 0 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* this is the log from the client computer. ********* WideClient Log [version 6.78] Class=FS98MAIN ********* Date (dmy): 09/02/09, Time 09:55:01.930: Client name is ROBERTCAMPBELL 203 Attempting to connect now 1201 Trying to locate server: Need details from Server Broadcast 1201 Failed to connect: waiting to try again 3214 Attempting to connect now 4742 New Client Application: "AS2004" (Id=3512) 67751 Trying to locate server: Need details from Server Broadcast what do you think i need to do to get it up. im runnig fs9 on the main com , and i have radar contact and active sky on my second computer. what am i doing wrong......Thanks..........Robert
  11. im wanting to upgrade to fsx and im wondering when i get fsx capatible fsuipc4 , will i get a upgrade price or will i have to buy the full price for the fsuipc4. just want to know before i buy , thanks. Robert
  12. hello out there im having a problem with FSUIPC, when i load fsmeteo from another com using widefs, fsmeteo will start and then say waiting for FSUIPC push FLY now in FS. to verify that i also started radar contact from another com through widefs, and it also is waiting on FSUIPC. that tells me that there is somthing wrong with FSUIPC from my understanding. my com has been down for about two weeks and i had to reload everything on my main com, including FSUIPC, WIDEFS, etc, the other three coms i did not have to do anything. i redownloaded the latest version of FSUIPC and WIDEFS, it is also registered. is there somthing im missing. Thanks.Camtech
  13. thanks pete and you are right , because i saw a great advantage in that also, it did feel more realistic, becase on my server i have five hundred watt klips, so i can hear the plane engines , and on the client i just hooked up my head phones and it felt like i was talking to the tower. thanks again.........................Camtech
  14. thanks pete and you are right , because i saw a great advantage in that also, it did feel more realistic, becase on my server i have five hundred watt klips, so i can hear the plane engines , and on the client i just hooked up my head phones and it felt like i was talking to the tower. thanks again.........................Camtech
  15. i have loaded radar control and flightdeck on my client, and it does work excepted for the sound and voices, does that mean i have to use speakers from the client or is there a way to get the sound from client to server. when i give a key command from the server it will work but no sound. Thanks...........................Camtech
  16. i have loaded radar control and flightdeck on my client, and it does work excepted for the sound and voices, does that mean i have to use speakers from the client or is there a way to get the sound from client to server. when i give a key command from the server it will work but no sound. Thanks...........................Camtech
  17. hello folks out there im just wondering if i loaded everthing correctly i put wideserver.dll and wideserver.ini in the flight sim folder on the server and then in the modules folder. then on the client i put the wideclient.exe and wideclient.ini in a folder that i renamed, the question is where do i put the folder that i renamed. also in the install directions it says if you want put in the fs utillity folder, does that mean that you have to put a copy of fsuipc on the client also. thanks .....Camtech
  18. hello folks out there im just wondering if i loaded everthing correctly i put wideserver.dll and wideserver.ini in the flight sim folder on the server and then in the modules folder. then on the client i put the wideclient.exe and wideclient.ini in a folder that i renamed, the question is where do i put the folder that i renamed. also in the install directions it says if you want put in the fs utillity folder, does that mean that you have to put a copy of fsuipc on the client also. thanks .....Camtech
  19. hello folks i guess im not clear on how this program works, but i will take a shot at it. with widefs can i use the advanced program pss/747 and put the extra components like , fsnavigator, fsmeteo, radar contac, and the most important of all , say like the over head panel can i display it on the second com, and also the pedestal, and radio panel etc. im using three moniters now with one com and i ant to spread it out over three coms. i know that with widview you can get more views , im concerned right now about instumentation. i believe i have it hooked up correctly, i just dont know how to set it up. Thanks........Camtech
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.