wlix261

Thanks for the quick Reply Pete. Will do that right away - That is well worth! Best regards Alvaro Escorcia

Hello I can not register FSUIPC5 using the same key have from FSUIPC4 (file FSUIPC4.KEY) .reading the instructions Seems like this would work. How can I regiister? regards Alvaro Escorcia

I talked with Francisco. He had a few wrong entries in P3D's scenery setup. Those were pointing inside the scenery folder for each airport and should have been pointing one level higher. No issue with Make Runways - All is OK.... Regards Alvaro Escorcia

Hello Pete Thanks for the wonderful work you do for the Fsim community Which of your apps should I use to obtain a dump in this format from my particular FSX-SE installation? Regards Alvaro Escorcia

After the P3D Crash, This is what comes out of the DLL.XML file located at c:\User\me\AppData\Roaming\Lockheed Martin\Prepar3D v3 <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>FSX-Join</Name> <Disabled>False</Disabled> <Path>Modules\FSX-JoinD.dll</Path> </Launch.Addon> <Launch.Addon> <Name>IvAp</Name> <Disabled>False</Disabled> <Path>C:\Program Files\IvAp v2\ivap_fsx_bootstrap.dll</Path> <Commandline> </Commandline> </Launch.Addon> <Launch.Addon> <Name>CMetroXml</Name> <ManualLoad>True</ManualLoad> <Disabled>False</Disabled> <Path>.\CMeteoXml.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Carenavigraph</Name> <Disabled>False</Disabled> <Path>.\Carenavigraph.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> <Launch.Addon> <Name>as_connect</Name> <Disabled>False</Disabled> <Path>as_srv\as_btstrp.dll</Path> </Launch.Addon> </SimBase.Document> Regards Alvaro Escorcia

I still lave the problem I use Lockheed Martin® Prepar3D® v3, Version: 3.4.14.18870 and FSUIPC4, Version 4.959 Hopefully Pete has the opportunity to look at this when he gets back from holidays regards Alvaro Escorcia

Peter: What is that worked for you? Thomas: Thanks for your patience. I have loaded P3D, selected the default scenario with a default (mooney) airplane and saved it as default. Problem persists. Here is the FSUIPC4 Log File ********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson ********* Windows version reported as 6.2.?.9200 Prepar3D.exe version = 3.4.14.18870 Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 or later Module base=51010000 User Name="Alvaro Escorcia" User Addr="aescorcia@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 32 System time = 27/12/2016 07:08:35 32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\" 32 NOTE: configuring for no weather reads or writes! 32 ------ Module Version Check ------ 32 acontain.dll: 3.4.14.18870 32 api.dll: 3.4.14.18870 32 controls.dll: 3.4.14.18870 32 fs-traffic.dll: 3.4.14.18870 32 G3D.dll: 3.4.14.18870 32 language.dll: 3.4.14.18870 32 sim1.dll: 3.4.14.18870 32 visualfx.dll: 3.4.14.18870 32 window.dll: 3.4.14.18870 32 ---------------------------------- 32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll 79 Found it: trying to connect 94 FS path = "C:\Prepar3Dv3\" 235 ---------------------- Joystick Device Scan ----------------------- 235 Product= Saitek Pro Flight Rudder Pedals 235 Manufacturer= Saitek 235 Vendor=06A3, Product=0763 (Version 1.1) 235 Serial Number= Saitek 235 Product= Saitek Pro Flight Yoke 235 Manufacturer= Saitek 235 Vendor=06A3, Product=0BAC (Version 3.2) 235 Serial Number= Saitek 235 ------------------------------------------------------------------- 266 LogOptions=00000000 00000001 266 ------------------------------------------------------------------- 266 ------ Setting the hooks and direct calls into the simulator ------ 266 --- CONTROLS timer memory location obtained ok 266 --- SIM1 Frictions access gained 266 --- FS Controls Table located ok 266 --- Installed Mouse Macro hooks ok. 266 --- Wind smoothing fix is not installed 266 --- SimConnect intercept for texts and menus option is off 266 --- All links okay (with no weather related ones) 266 ------------------------------------------------------------------- 266 SimConnect_Open succeeded: waiting to check version okay 266 Trying to use SimConnect Prepar3D 266 Opened separate AI Traffic client okay 56782 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0) 56782 Initialising SimConnect data requests now 56782 FSUIPC Menu entry added 56813 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\DEFAULT PLANE LEVC.fxml 56813 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air 140750 User Aircraft ID 2 supplied, now being used 141579 System time = 27/12/2016 07:10:57, Simulator time = 08:55:08 (07:55Z) 141594 Aircraft="Mooney Bravo" 147610 Starting everything now ... 147641 ASN active function link set 147641 Ready for ASN WX radar 165750 Sim stopped: average frame rate for last 25 secs = 36.4 fps 165750 Max AI traffic was 0 aircraft 337688 Sim stopped: average frame rate for last 167 secs = 47.3 fps 337688 Max AI traffic was 0 aircraft 367844 === Calling SimConnect_Close ... 368047 === SimConnect_Close done! 369047 System time = 27/12/2016 07:14:44, Simulator time = 08:57:54 (07:57Z) 369047 *** FSUIPC log file being closed Minimum frame rate was 23.3 fps, Maximum was 60.0 fps Minimum available memory recorded was 1572Mb Average frame rate for running time of 192 secs = 45.9 fps Maximum AI traffic for session was 0 aircraft Memory managed: 5 Allocs, 4 Freed ********* FSUIPC Log file closed ***********

Peter: What is that worked for you? Thomas: Thanks for your patience. I have loaded P3D, selected the default scenario with a default (mooney) airplane and saved it as default. Problem persists. Here is the FSUIPC4 Log File ********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson ********* Windows version reported as 6.2.?.9200 Prepar3D.exe version = 3.4.14.18870 Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 or later Module base=51010000 User Name="Alvaro Escorcia" User Addr="aescorcia@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 32 System time = 27/12/2016 07:08:35 32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\" 32 NOTE: configuring for no weather reads or writes! 32 ------ Module Version Check ------ 32 acontain.dll: 3.4.14.18870 32 api.dll: 3.4.14.18870 32 controls.dll: 3.4.14.18870 32 fs-traffic.dll: 3.4.14.18870 32 G3D.dll: 3.4.14.18870 32 language.dll: 3.4.14.18870 32 sim1.dll: 3.4.14.18870 32 visualfx.dll: 3.4.14.18870 32 window.dll: 3.4.14.18870 32 ---------------------------------- 32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll 79 Found it: trying to connect 94 FS path = "C:\Prepar3Dv3\" 235 ---------------------- Joystick Device Scan ----------------------- 235 Product= Saitek Pro Flight Rudder Pedals 235 Manufacturer= Saitek 235 Vendor=06A3, Product=0763 (Version 1.1) 235 Serial Number= Saitek 235 Product= Saitek Pro Flight Yoke 235 Manufacturer= Saitek 235 Vendor=06A3, Product=0BAC (Version 3.2) 235 Serial Number= Saitek 235 ------------------------------------------------------------------- 266 LogOptions=00000000 00000001 266 ------------------------------------------------------------------- 266 ------ Setting the hooks and direct calls into the simulator ------ 266 --- CONTROLS timer memory location obtained ok 266 --- SIM1 Frictions access gained 266 --- FS Controls Table located ok 266 --- Installed Mouse Macro hooks ok. 266 --- Wind smoothing fix is not installed 266 --- SimConnect intercept for texts and menus option is off 266 --- All links okay (with no weather related ones) 266 ------------------------------------------------------------------- 266 SimConnect_Open succeeded: waiting to check version okay 266 Trying to use SimConnect Prepar3D 266 Opened separate AI Traffic client okay 56782 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0) 56782 Initialising SimConnect data requests now 56782 FSUIPC Menu entry added 56813 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\DEFAULT PLANE LEVC.fxml 56813 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air 140750 User Aircraft ID 2 supplied, now being used 141579 System time = 27/12/2016 07:10:57, Simulator time = 08:55:08 (07:55Z) 141594 Aircraft="Mooney Bravo" 147610 Starting everything now ... 147641 ASN active function link set 147641 Ready for ASN WX radar 165750 Sim stopped: average frame rate for last 25 secs = 36.4 fps 165750 Max AI traffic was 0 aircraft 337688 Sim stopped: average frame rate for last 167 secs = 47.3 fps 337688 Max AI traffic was 0 aircraft 367844 === Calling SimConnect_Close ... 368047 === SimConnect_Close done! 369047 System time = 27/12/2016 07:14:44, Simulator time = 08:57:54 (07:57Z) 369047 *** FSUIPC log file being closed Minimum frame rate was 23.3 fps, Maximum was 60.0 fps Minimum available memory recorded was 1572Mb Average frame rate for running time of 192 secs = 45.9 fps Maximum AI traffic for session was 0 aircraft Memory managed: 5 Allocs, 4 Freed ********* FSUIPC Log file closed ***********

Hi, here is the content of FSUIPC4 Log file during the full cycle of crash-fix-load: I loaded P3d selecting a default Aircraft, and after a minute or so I closed P3D. After the Icon disappeared I noticed in Win Task manager that the P3D process was still running, and after a few more minutes it stopped on its own with a little window (crash or error) message. This is the FSUIPC4 log right at that moment : P3D closed with default plane and reported a bad exit: ********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson ********* Windows version reported as 6.2.?.9200 Prepar3D.exe version = 3.4.14.18870 Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 or later Module base=52240000 User Name="Alvaro Escorcia" User Addr="aescorcia@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 32 System time = 26/12/2016 06:55:00 32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\" 32 NOTE: configuring for no weather reads or writes! 32 ------ Module Version Check ------ 32 acontain.dll: 3.4.14.18870 32 api.dll: 3.4.14.18870 32 controls.dll: 3.4.14.18870 32 fs-traffic.dll: 3.4.14.18870 32 G3D.dll: 3.4.14.18870 32 language.dll: 3.4.14.18870 32 sim1.dll: 3.4.14.18870 32 visualfx.dll: 3.4.14.18870 32 window.dll: 3.4.14.18870 32 ---------------------------------- 32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll 63 Found it: trying to connect 78 FS path = "C:\Prepar3Dv3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek Pro Flight Rudder Pedals 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0763 (Version 1.1) 203 Serial Number= Saitek 203 Product= Saitek Pro Flight Yoke 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0BAC (Version 3.2) 203 Serial Number= Saitek 203 ------------------------------------------------------------------- 235 LogOptions=00000000 00000001 235 ------------------------------------------------------------------- 235 ------ Setting the hooks and direct calls into the simulator ------ 235 --- CONTROLS timer memory location obtained ok 235 --- SIM1 Frictions access gained 235 --- FS Controls Table located ok 235 --- Installed Mouse Macro hooks ok. 235 --- Wind smoothing fix is not installed 235 --- SimConnect intercept for texts and menus option is off 235 --- All links okay (with no weather related ones) 235 ------------------------------------------------------------------- 235 SimConnect_Open succeeded: waiting to check version okay 235 Trying to use SimConnect Prepar3D 235 Opened separate AI Traffic client okay 52891 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0) 52891 Initialising SimConnect data requests now 52891 FSUIPC Menu entry added 52891 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml 52891 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air 1757032 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air 1817188 User Aircraft ID 2 supplied, now being used 1817547 System time = 26/12/2016 07:25:17, Simulator time = 09:07:39 (08:07Z) 1817547 Aircraft="Mooney Bravo" 1819500 Starting everything now ... 1819532 ASN active function link set 1819532 Ready for ASN WX radar 1839969 Sim stopped: average frame rate for last 23 secs = 38.7 fps 1839969 Max AI traffic was 0 aircraft 1886313 Sim stopped: average frame rate for last 41 secs = 49.6 fps 1886313 Max AI traffic was 0 aircraft 1949016 === Calling SimConnect_Close ... 1949219 === SimConnect_Close done! 1950219 System time = 26/12/2016 07:27:30, Simulator time = 09:08:25 (08:08Z) 1950219 *** FSUIPC log file being closed Minimum frame rate was 30.0 fps, Maximum was 61.4 fps Minimum available memory recorded was 1687Mb Average frame rate for running time of 69 secs = 46.3 fps Maximum AI traffic for session was 0 aircraft Memory managed: 5 Allocs, 4 Freed ********* FSUIPC Log file closed *********** Without changing anything else I try to load P3D and as expected I get a fatal crash. This is the FSUIPC4 log file I get. Seems to be the same content as before the missed-load-attempt despite the fact that I opened and closed it a few times to be sure is the fresh version ********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson ********* Windows version reported as 6.2.?.9200 Prepar3D.exe version = 3.4.14.18870 Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 or later Module base=52240000 User Name="Alvaro Escorcia" User Addr="aescorcia@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 32 System time = 26/12/2016 06:55:00 32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\" 32 NOTE: configuring for no weather reads or writes! 32 ------ Module Version Check ------ 32 acontain.dll: 3.4.14.18870 32 api.dll: 3.4.14.18870 32 controls.dll: 3.4.14.18870 32 fs-traffic.dll: 3.4.14.18870 32 G3D.dll: 3.4.14.18870 32 language.dll: 3.4.14.18870 32 sim1.dll: 3.4.14.18870 32 visualfx.dll: 3.4.14.18870 32 window.dll: 3.4.14.18870 32 ---------------------------------- 32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll 63 Found it: trying to connect 78 FS path = "C:\Prepar3Dv3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek Pro Flight Rudder Pedals 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0763 (Version 1.1) 203 Serial Number= Saitek 203 Product= Saitek Pro Flight Yoke 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0BAC (Version 3.2) 203 Serial Number= Saitek 203 ------------------------------------------------------------------- 235 LogOptions=00000000 00000001 235 ------------------------------------------------------------------- 235 ------ Setting the hooks and direct calls into the simulator ------ 235 --- CONTROLS timer memory location obtained ok 235 --- SIM1 Frictions access gained 235 --- FS Controls Table located ok 235 --- Installed Mouse Macro hooks ok. 235 --- Wind smoothing fix is not installed 235 --- SimConnect intercept for texts and menus option is off 235 --- All links okay (with no weather related ones) 235 ------------------------------------------------------------------- 235 SimConnect_Open succeeded: waiting to check version okay 235 Trying to use SimConnect Prepar3D 235 Opened separate AI Traffic client okay 52891 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0) 52891 Initialising SimConnect data requests now 52891 FSUIPC Menu entry added 52891 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml 52891 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air 1757032 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air 1817188 User Aircraft ID 2 supplied, now being used 1817547 System time = 26/12/2016 07:25:17, Simulator time = 09:07:39 (08:07Z) 1817547 Aircraft="Mooney Bravo" 1819500 Starting everything now ... 1819532 ASN active function link set 1819532 Ready for ASN WX radar 1839969 Sim stopped: average frame rate for last 23 secs = 38.7 fps 1839969 Max AI traffic was 0 aircraft 1886313 Sim stopped: average frame rate for last 41 secs = 49.6 fps 1886313 Max AI traffic was 0 aircraft 1949016 === Calling SimConnect_Close ... 1949219 === SimConnect_Close done! 1950219 System time = 26/12/2016 07:27:30, Simulator time = 09:08:25 (08:08Z) 1950219 *** FSUIPC log file being closed Minimum frame rate was 30.0 fps, Maximum was 61.4 fps Minimum available memory recorded was 1687Mb Average frame rate for running time of 69 secs = 46.3 fps Maximum AI traffic for session was 0 aircraft Memory managed: 5 Allocs, 4 Freed ********* FSUIPC Log file closed *********** Then I run my onetimefix (FSUIPC4 installer), so I can load P3D again. I chose a default (mooney) aircraft, and it loads OK. At that point this is what I get from the FSUIPC4 Log File: ********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson ********* Windows version reported as 6.2.?.9200 Prepar3D.exe version = 3.4.14.18870 Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 or later Module base=52240000 User Name="Alvaro Escorcia" User Addr="aescorcia@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 16 System time = 26/12/2016 07:43:02 16 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\" 16 NOTE: configuring for no weather reads or writes! 16 ------ Module Version Check ------ 16 acontain.dll: 3.4.14.18870 16 api.dll: 3.4.14.18870 16 controls.dll: 3.4.14.18870 16 fs-traffic.dll: 3.4.14.18870 16 G3D.dll: 3.4.14.18870 16 language.dll: 3.4.14.18870 16 sim1.dll: 3.4.14.18870 16 visualfx.dll: 3.4.14.18870 16 window.dll: 3.4.14.18870 16 ---------------------------------- 16 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll 47 Found it: trying to connect 63 FS path = "C:\Prepar3Dv3\" 188 ---------------------- Joystick Device Scan ----------------------- 188 Product= Saitek Pro Flight Rudder Pedals 188 Manufacturer= Saitek 188 Vendor=06A3, Product=0763 (Version 1.1) 188 Serial Number= Saitek 188 Product= Saitek Pro Flight Yoke 188 Manufacturer= Saitek 188 Vendor=06A3, Product=0BAC (Version 3.2) 188 Serial Number= Saitek 188 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 219 ------------------------------------------------------------------- 219 ------ Setting the hooks and direct calls into the simulator ------ 219 --- CONTROLS timer memory location obtained ok 219 --- SIM1 Frictions access gained 219 --- FS Controls Table located ok 219 --- Installed Mouse Macro hooks ok. 219 --- Wind smoothing fix is not installed 219 --- SimConnect intercept for texts and menus option is off 219 --- All links okay (with no weather related ones) 219 ------------------------------------------------------------------- 219 SimConnect_Open succeeded: waiting to check version okay 219 Trying to use SimConnect Prepar3D 219 Opened separate AI Traffic client okay 52750 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0) 52750 Initialising SimConnect data requests now 52750 FSUIPC Menu entry added 52766 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml 52766 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air 81391 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air 140735 User Aircraft ID 2 supplied, now being used 140860 System time = 26/12/2016 07:45:23, Simulator time = 08:44:20 (07:44Z) 140860 Aircraft="Mooney Bravo" 142844 Starting everything now ... 142875 ASN active function link set 142875 Ready for ASN WX radar 163141 Sim stopped: average frame rate for last 22 secs = 38.4 fps 163141 Max AI traffic was 0 aircraft =================

And here is the content of the FSUIPC4 log file ********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson ********* Windows version reported as 6.2.?.9200 Prepar3D.exe version = 3.4.14.18870 Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 or later Module base=52240000 User Name="Alvaro Escorcia" User Addr="aescorcia@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 32 System time = 26/12/2016 06:55:00 32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\" 32 NOTE: configuring for no weather reads or writes! 32 ------ Module Version Check ------ 32 acontain.dll: 3.4.14.18870 32 api.dll: 3.4.14.18870 32 controls.dll: 3.4.14.18870 32 fs-traffic.dll: 3.4.14.18870 32 G3D.dll: 3.4.14.18870 32 language.dll: 3.4.14.18870 32 sim1.dll: 3.4.14.18870 32 visualfx.dll: 3.4.14.18870 32 window.dll: 3.4.14.18870 32 ---------------------------------- 32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll 63 Found it: trying to connect 78 FS path = "C:\Prepar3Dv3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek Pro Flight Rudder Pedals 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0763 (Version 1.1) 203 Serial Number= Saitek 203 Product= Saitek Pro Flight Yoke 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0BAC (Version 3.2) 203 Serial Number= Saitek 203 ------------------------------------------------------------------- 235 LogOptions=00000000 00000001 235 ------------------------------------------------------------------- 235 ------ Setting the hooks and direct calls into the simulator ------ 235 --- CONTROLS timer memory location obtained ok 235 --- SIM1 Frictions access gained 235 --- FS Controls Table located ok 235 --- Installed Mouse Macro hooks ok. 235 --- Wind smoothing fix is not installed 235 --- SimConnect intercept for texts and menus option is off 235 --- All links okay (with no weather related ones) 235 ------------------------------------------------------------------- 235 SimConnect_Open succeeded: waiting to check version okay 235 Trying to use SimConnect Prepar3D 235 Opened separate AI Traffic client okay 52891 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0) 52891 Initialising SimConnect data requests now 52891 FSUIPC Menu entry added 52891 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml 52891 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air

I have updated this post

Thomas Thank you for the advice. I found the instances you refer to for the .WX files and for the wxstationlist.bin file which I deleted. I also added the line "NoWeatherAtAll=Yes" to the FSUIPC.ini file. I did that having P3D open. I then closed it , opened it again and It loaded OK. I hope this stays like this and I can close/open P3D at my will without having the crashes. ===> Update: Yet P3D crashed again. The fix worked for 1 time only. After crash I checked the FSUIPC.ini file still with the new line, and the wxstationlist.bin back where it was before, as well as 1 .wx file (the previous file one). Another observation: having deleted the .bin and .wx files did not get P3D back to be able to start. Really the only way I get P3D back to start is by re-running the Install FSUIPC4.exe (it finds the installation and I tell him to use existing registration. So it really doesn't seem to install anything, but perhaps cleans up or re-initiate something that makes P3D to load OK the next time I rune it.... I can use P3D OK ...but P3D still reports an error when closing and goes back to not load, and the cycle starts again). By the way, can you tell me if having added the line to the FSUIPC.ini file will prevent using my external weather engine = AS2016? Thanks and regards Alvaro Escorcia

Hello, I use W10, P3D version 3.4.14.and FSUIPC Version 4.95 I am having crash when trying to load P3Dv3.4, and I get a windows crash report that lists the fault module name as FSUIPC4.dll. I was asked to ask here in the FSUIPC support forum for help. Thanks in advance regards Alvaro Escorcia ====================== Version=1 EventType=APPCRASH EventTime=131270548622828061 ReportType=2 Consent=1 UploadTime=131270548623687519 ReportIdentifier=91c8cece-c9d1-11e6-a988-d8cb8a5ad4fb IntegratorReportIdentifier=91c8cecd-c9d1-11e6-a988-d8cb8a5ad4fb WOW64=1 AppSessionGuid=00000bb0-0001-0039-0b2b-954dde5dd201 TargetAppId=W:0000da39a3ee5e6b4b0d3255bfef95601890afd80709!0000da39a3ee5e6b4b0d3255bfef95601890afd80709!Prepar3D.exe TargetAppVer=2016//10//27:17:31:14!6cc50!Prepar3D.exe BootId=4294967295 Response.BucketId=a8a1b4db5c4504c465b2e4a7a87ac757 Response.BucketTable=1 Response.LegacyBucketId=108646897907 Response.type=4 Sig[0].Name=Application Name Sig[0].Value=Prepar3D.exe Sig[1].Name=Application Version Sig[1].Value=3.4.14.18870 Sig[2].Name=Application Timestamp Sig[2].Value=581239e2 Sig[3].Name=Fault Module Name Sig[3].Value=FSUIPC4.dll Sig[4].Name=Fault Module Version Sig[4].Value=4.9.5.8 Sig[5].Name=Fault Module Timestamp Sig[5].Value=5857240f Sig[6].Name=Exception Code Sig[6].Value=c0000005 Sig[7].Name=Exception Offset Sig[7].Value=0001f044 DynamicSig[1].Name=OS Version DynamicSig[1].Value=10.0.14393.2.0.0.256.48 DynamicSig[2].Name=Locale ID DynamicSig[2].Value=1033 UI[2]=C:\Prepar3Dv3\Prepar3D.exe UI[3]=A fatal error occurred. UI[4]=Windows can check online for a solution to the problem. UI[5]=Check online for a solution and close the program UI[6]=Check online for a solution later and close the program UI[7]=Close the program LoadedModule[0]=C:\Prepar3Dv3\Prepar3D.exe LoadedModule[1]=C:\WINDOWS\SYSTEM32\ntdll.dll LoadedModule[2]=C:\WINDOWS\System32\KERNEL32.DLL LoadedModule[3]=C:\WINDOWS\System32\KERNELBASE.dll LoadedModule[4]=C:\Program Files (x86)\AVG\Av\avghookx.dll LoadedModule[5]=C:\WINDOWS\system32\apphelp.dll LoadedModule[6]=C:\WINDOWS\AppPatch\AcGenral.DLL LoadedModule[7]=C:\WINDOWS\System32\msvcrt.dll LoadedModule[8]=C:\WINDOWS\System32\sechost.dll LoadedModule[9]=C:\WINDOWS\System32\RPCRT4.dll LoadedModule[10]=C:\WINDOWS\System32\SspiCli.dll LoadedModule[11]=C:\WINDOWS\System32\CRYPTBASE.dll LoadedModule[12]=C:\WINDOWS\System32\bcryptPrimitives.dll LoadedModule[13]=C:\WINDOWS\System32\SHLWAPI.dll LoadedModule[14]=C:\WINDOWS\System32\combase.dll LoadedModule[15]=C:\WINDOWS\System32\ucrtbase.dll LoadedModule[16]=C:\WINDOWS\System32\GDI32.dll LoadedModule[17]=C:\WINDOWS\System32\gdi32full.dll LoadedModule[18]=C:\WINDOWS\System32\USER32.dll LoadedModule[19]=C:\WINDOWS\System32\win32u.dll LoadedModule[20]=C:\WINDOWS\System32\ole32.dll LoadedModule[21]=C:\WINDOWS\System32\OLEAUT32.dll LoadedModule[22]=C:\WINDOWS\System32\msvcp_win.dll LoadedModule[23]=C:\WINDOWS\System32\SHELL32.dll LoadedModule[24]=C:\WINDOWS\System32\cfgmgr32.dll LoadedModule[25]=C:\WINDOWS\System32\windows.storage.dll LoadedModule[26]=C:\WINDOWS\System32\powrprof.dll LoadedModule[27]=C:\WINDOWS\System32\advapi32.dll LoadedModule[28]=C:\WINDOWS\System32\kernel.appcore.dll LoadedModule[29]=C:\WINDOWS\System32\shcore.dll LoadedModule[30]=C:\WINDOWS\System32\profapi.dll LoadedModule[31]=C:\WINDOWS\SYSTEM32\UxTheme.dll LoadedModule[32]=C:\WINDOWS\SYSTEM32\WINMM.dll LoadedModule[33]=C:\WINDOWS\SYSTEM32\samcli.dll LoadedModule[34]=C:\WINDOWS\SYSTEM32\MSACM32.dll LoadedModule[35]=C:\WINDOWS\SYSTEM32\VERSION.dll LoadedModule[36]=C:\WINDOWS\SYSTEM32\USERENV.dll LoadedModule[37]=C:\WINDOWS\SYSTEM32\dwmapi.dll LoadedModule[38]=C:\WINDOWS\SYSTEM32\urlmon.dll LoadedModule[39]=C:\WINDOWS\SYSTEM32\WINSPOOL.DRV LoadedModule[40]=C:\WINDOWS\SYSTEM32\MPR.dll LoadedModule[41]=C:\WINDOWS\SYSTEM32\WINMMBASE.dll LoadedModule[42]=C:\WINDOWS\SYSTEM32\iertutil.dll LoadedModule[43]=C:\WINDOWS\SYSTEM32\bcrypt.dll LoadedModule[44]=C:\WINDOWS\System32\IMM32.DLL LoadedModule[45]=C:\Prepar3Dv3\api.dll LoadedModule[46]=C:\WINDOWS\System32\WS2_32.dll LoadedModule[47]=C:\WINDOWS\System32\CRYPT32.dll LoadedModule[48]=C:\WINDOWS\System32\MSASN1.dll LoadedModule[49]=C:\WINDOWS\SYSTEM32\MSVCP120.dll LoadedModule[50]=C:\WINDOWS\SYSTEM32\MSVCR120.dll LoadedModule[51]=C:\WINDOWS\SYSTEM32\Cabinet.dll LoadedModule[52]=C:\WINDOWS\SYSTEM32\MSWSOCK.dll LoadedModule[53]=C:\WINDOWS\SYSTEM32\WINHTTP.dll LoadedModule[54]=C:\WINDOWS\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.14393.447_none_5507ded2cb4f7f4c\COMCTL32.dll LoadedModule[55]=C:\Prepar3Dv3\acontain.dll LoadedModule[56]=C:\Prepar3Dv3\ai_player.dll LoadedModule[57]=C:\Prepar3Dv3\atc.dll LoadedModule[58]=C:\Prepar3Dv3\controls.dll LoadedModule[59]=C:\WINDOWS\System32\SETUPAPI.dll LoadedModule[60]=C:\Prepar3Dv3\demo.dll LoadedModule[61]=C:\Prepar3Dv3\DIS.dll LoadedModule[62]=C:\Prepar3Dv3\facilities.dll LoadedModule[63]=C:\Prepar3Dv3\fe.dll LoadedModule[64]=C:\Prepar3Dv3\flight.dll LoadedModule[65]=C:\Prepar3Dv3\fs-traffic.dll LoadedModule[66]=C:\Prepar3Dv3\g2d.dll LoadedModule[67]=C:\WINDOWS\System32\WLDAP32.dll LoadedModule[68]=C:\Prepar3Dv3\g3d.dll LoadedModule[69]=C:\Prepar3Dv3\gps.dll LoadedModule[70]=C:\Prepar3Dv3\livingwater.dll LoadedModule[71]=C:\Prepar3Dv3\main.dll LoadedModule[72]=C:\WINDOWS\System32\COMDLG32.dll LoadedModule[73]=C:\Prepar3Dv3\menus.dll LoadedModule[74]=C:\Prepar3Dv3\multiplayer.dll LoadedModule[75]=C:\Prepar3Dv3\pdk.dll LoadedModule[76]=C:\Prepar3Dv3\panels.dll LoadedModule[77]=C:\Prepar3Dv3\sim1.dll LoadedModule[78]=C:\Prepar3Dv3\simscheduler.dll LoadedModule[79]=C:\Prepar3Dv3\simprop.dll LoadedModule[80]=C:\Prepar3Dv3\sound.dll LoadedModule[81]=C:\Prepar3Dv3\symmap.dll LoadedModule[82]=C:\Prepar3Dv3\terrain.dll LoadedModule[83]=C:\Prepar3Dv3\util.dll LoadedModule[84]=C:\Prepar3Dv3\visualfx.dll LoadedModule[85]=C:\Prepar3Dv3\weather.dll LoadedModule[86]=C:\Prepar3Dv3\window.dll LoadedModule[87]=C:\WINDOWS\SYSTEM32\HID.DLL LoadedModule[88]=C:\WINDOWS\SYSTEM32\DINPUT8.dll LoadedModule[89]=C:\Prepar3Dv3\mplEasyBlendSDKDX11.dll LoadedModule[90]=C:\WINDOWS\SYSTEM32\MFReadWrite.dll LoadedModule[91]=C:\WINDOWS\SYSTEM32\MFPlat.DLL LoadedModule[92]=C:\WINDOWS\SYSTEM32\dxgi.dll LoadedModule[93]=C:\WINDOWS\SYSTEM32\d3d9.dll LoadedModule[94]=C:\WINDOWS\SYSTEM32\d3d11.dll LoadedModule[95]=C:\Prepar3Dv3\D3DCOMPILER_47.dll LoadedModule[96]=C:\WINDOWS\SYSTEM32\OPENGL32.dll LoadedModule[97]=C:\WINDOWS\SYSTEM32\GLU32.dll LoadedModule[98]=C:\WINDOWS\SYSTEM32\d3dx9_43.dll LoadedModule[99]=C:\WINDOWS\SYSTEM32\d3dx11_43.dll LoadedModule[100]=C:\Prepar3Dv3\d3dcsx_47.dll LoadedModule[101]=C:\WINDOWS\SYSTEM32\DSOUND.dll LoadedModule[102]=C:\Prepar3Dv3\audiere.dll LoadedModule[103]=C:\WINDOWS\SYSTEM32\D3DCOMPILER_43.dll LoadedModule[104]=C:\WINDOWS\SYSTEM32\DDRAW.dll LoadedModule[105]=C:\WINDOWS\SYSTEM32\DCIMAN32.dll LoadedModule[106]=C:\WINDOWS\SYSTEM32\RTWorkQ.DLL LoadedModule[107]=C:\Prepar3Dv3\language.dll LoadedModule[108]=C:\WINDOWS\SYSTEM32\MSXML6.DLL LoadedModule[109]=C:\WINDOWS\SYSTEM32\ntmarta.dll LoadedModule[110]=C:\Prepar3Dv3\uiInterface.dll LoadedModule[111]=C:\WINDOWS\SYSTEM32\mscoree.dll LoadedModule[112]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll LoadedModule[113]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll LoadedModule[114]=C:\WINDOWS\SYSTEM32\MSVCR120_CLR0400.dll LoadedModule[115]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\mscorlib\40571abae9422cd2ca6fafbbde1c3cdc\mscorlib.ni.dll LoadedModule[116]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\clrjit.dll LoadedModule[117]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System\08da6b6698b412866e6910ae9b84f363\System.ni.dll LoadedModule[118]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\PresentationCore\051a282e157a228405b2e0d867c3ce1d\PresentationCore.ni.dll LoadedModule[119]=C:\WINDOWS\SYSTEM32\CRYPTSP.dll LoadedModule[120]=C:\WINDOWS\system32\rsaenh.dll LoadedModule[121]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Presentatio5ae0f00f#\5272cb4aeec65bec2fffb45e9cb22910\PresentationFramework.ni.dll LoadedModule[122]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Core\f6ebd52be27fe627fed0d185c6a9c0d5\System.Core.ni.dll LoadedModule[123]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\WindowsBase\5751e969e4789e60d3ad463cb6024006\WindowsBase.ni.dll LoadedModule[124]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Xaml\04c4f83e0b62ff553abff98943e45f42\System.Xaml.ni.dll LoadedModule[125]=C:\WINDOWS\SYSTEM32\dwrite.dll LoadedModule[126]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\wpfgfx_v0400.dll LoadedModule[127]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\PresentationNative_v0400.dll LoadedModule[128]=C:\WINDOWS\SYSTEM32\PROPSYS.dll LoadedModule[129]=C:\WINDOWS\SYSTEM32\iphlpapi.dll LoadedModule[130]=C:\WINDOWS\System32\NSI.dll LoadedModule[131]=C:\WINDOWS\SYSTEM32\dhcpcsvc6.DLL LoadedModule[132]=C:\WINDOWS\SYSTEM32\dhcpcsvc.DLL LoadedModule[133]=C:\WINDOWS\SYSTEM32\ondemandconnroutehelper.dll LoadedModule[134]=C:\WINDOWS\System32\MSCTF.dll LoadedModule[135]=C:\WINDOWS\SYSTEM32\secur32.dll LoadedModule[136]=C:\WINDOWS\SYSTEM32\DNSAPI.dll LoadedModule[137]=C:\WINDOWS\System32\fwpuclnt.dll LoadedModule[138]=C:\Windows\System32\rasadhlp.dll LoadedModule[139]=C:\WINDOWS\system32\nvapi.dll LoadedModule[140]=C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispiwu.inf_amd64_9ff5ab165faead52\nvwgf2um.dll LoadedModule[141]=C:\WINDOWS\SYSTEM32\DEVOBJ.dll LoadedModule[142]=C:\WINDOWS\System32\WINTRUST.dll LoadedModule[143]=C:\WINDOWS\SYSTEM32\WTSAPI32.DLL LoadedModule[144]=C:\WINDOWS\SYSTEM32\WINSTA.dll LoadedModule[145]=C:\WINDOWS\System32\clbcatq.dll LoadedModule[146]=C:\WINDOWS\system32\ntshrui.dll LoadedModule[147]=C:\WINDOWS\system32\srvcli.dll LoadedModule[148]=C:\WINDOWS\SYSTEM32\cscapi.dll LoadedModule[149]=C:\WINDOWS\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.14393.447_none_89c64d28dafea4b9\comctl32.dll LoadedModule[150]=C:\WINDOWS\system32\netutils.dll LoadedModule[151]=C:\WINDOWS\System32\coml2.dll LoadedModule[152]=C:\WINDOWS\system32\mssprxy.dll LoadedModule[153]=C:\WINDOWS\SYSTEM32\LINKINFO.dll LoadedModule[154]=C:\WINDOWS\System32\MMDevApi.dll LoadedModule[155]=C:\WINDOWS\SYSTEM32\AUDIOSES.DLL LoadedModule[156]=C:\WINDOWS\SYSTEM32\wintypes.dll LoadedModule[157]=C:\WINDOWS\SYSTEM32\avrt.dll LoadedModule[158]=C:\WINDOWS\SYSTEM32\XInput9_1_0.dll LoadedModule[159]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Presentatioaec034ca#\def8702c6e883330fb8cb8e3f5c5e665\PresentationFramework.Aero2.ni.dll LoadedModule[160]=C:\WINDOWS\SYSTEM32\WindowsCodecs.dll LoadedModule[161]=C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispiwu.inf_amd64_9ff5ab165faead52\nvd3dum.dll LoadedModule[162]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Drawing\c2abcda8f96d67fa6ff5665fd21dddff\System.Drawing.ni.dll LoadedModule[163]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Windows.Forms\c02fbf560e52a1aab432a90d4c613af4\System.Windows.Forms.ni.dll LoadedModule[164]=C:\WINDOWS\SYSTEM32\wdmaud.drv LoadedModule[165]=C:\WINDOWS\SYSTEM32\ksuser.dll LoadedModule[166]=C:\WINDOWS\SYSTEM32\msacm32.drv LoadedModule[167]=C:\WINDOWS\SYSTEM32\midimap.dll LoadedModule[168]=C:\Prepar3Dv3\radar.dll LoadedModule[169]=C:\Prepar3Dv3\VirtualReality.dll LoadedModule[170]=C:\Prepar3Dv3\openvr_api.dll LoadedModule[171]=C:\Prepar3Dv3\ControllableCamera.dll LoadedModule[172]=C:\Prepar3Dv3\SimDirector.dll LoadedModule[173]=C:\Prepar3Dv3\BGLCompLib.dll LoadedModule[174]=C:\Prepar3Dv3\simpropext.dll LoadedModule[175]=C:\Prepar3Dv3\PMDG\DLLs\PMDG_HUD_interface.dll LoadedModule[176]=C:\WINDOWS\WinSxS\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_10.0.61259.0_none_55f5ecdc14f60568\SimConnect.dll LoadedModule[177]=C:\WINDOWS\SYSTEM32\MSVCR100.dll LoadedModule[178]=C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9268_none_d08e1538442a243e\MSVCR80.dll LoadedModule[179]=C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9268_none_d08e1538442a243e\MSVCP80.dll LoadedModule[180]=C:\WINDOWS\SYSTEM32\SHFOLDER.dll LoadedModule[181]=C:\Prepar3Dv3\PMDG\DLLs\PMDG_Interface.dll LoadedModule[182]=C:\Prepar3Dv3\RAASPRO\RAASPRO.dll LoadedModule[183]=C:\WINDOWS\SYSTEM32\WININET.dll LoadedModule[184]=C:\WINDOWS\SYSTEM32\WINNSI.DLL LoadedModule[185]=C:\Program Files (x86)\Common Files\System\ado\msado15.dll LoadedModule[186]=C:\WINDOWS\SYSTEM32\MSDART.DLL LoadedModule[187]=C:\Program Files (x86)\Common Files\System\Ole DB\oledb32.dll LoadedModule[188]=C:\WINDOWS\SYSTEM32\DPAPI.dll LoadedModule[189]=C:\Windows\System32\comsvcs.dll LoadedModule[190]=C:\Windows\System32\msjetoledb40.dll LoadedModule[191]=C:\Windows\System32\msjet40.dll LoadedModule[192]=C:\Windows\System32\msjter40.dll LoadedModule[193]=C:\Windows\System32\mswstr10.dll LoadedModule[194]=C:\Windows\System32\MSJINT40.DLL LoadedModule[195]=C:\Windows\System32\mstext40.dll LoadedModule[196]=C:\WINDOWS\SYSTEM32\mlang.dll LoadedModule[197]=C:\WINDOWS\SYSTEM32\RAASAUDIO32.DLL LoadedModule[198]=C:\WINDOWS\SYSTEM32\X3DAudio1_6.dll LoadedModule[199]=C:\WINDOWS\System32\xactengine3_4.dll LoadedModule[200]=C:\WINDOWS\System32\XAudio2_4.dll LoadedModule[201]=C:\Prepar3Dv3\Gauges\TargetInfo.dll LoadedModule[202]=C:\Prepar3Dv3\Gauges\Fury_1500.dll LoadedModule[203]=C:\Prepar3Dv3\Modules\FSX-JoinD.dll LoadedModule[204]=C:\WINDOWS\SYSTEM32\mfc100.dll LoadedModule[205]=C:\WINDOWS\SYSTEM32\MSIMG32.dll LoadedModule[206]=C:\WINDOWS\SYSTEM32\MFC100ENU.DLL LoadedModule[207]=C:\Program Files\IvAp v2\ivap_fsx_bootstrap.dll LoadedModule[208]=C:\WINDOWS\System32\PSAPI.DLL LoadedModule[209]=C:\WINDOWS\SYSTEM32\MSVCP100.dll LoadedModule[210]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Configuration\aa9c29b70b4cceab890eb841f89d73e9\System.Configuration.ni.dll LoadedModule[211]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Xml\7532301b00fac8def2f526ca8b480e11\System.Xml.ni.dll LoadedModule[212]=C:\WINDOWS\system32\dataexchange.dll LoadedModule[213]=C:\WINDOWS\system32\dcomp.dll LoadedModule[214]=C:\WINDOWS\system32\twinapi.appcore.dll LoadedModule[215]=C:\WINDOWS\system32\msctfui.dll LoadedModule[216]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\UIAutomationTypes\75ed56cf95fe6228472b5e57ac7a76b7\UIAutomationTypes.ni.dll LoadedModule[217]=C:\WINDOWS\SYSTEM32\UIAutomationCore.dll LoadedModule[218]=C:\WINDOWS\SYSTEM32\sxs.dll LoadedModule[219]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Runteb92aa12#\213003369298faf75651a6b8981dce12\System.Runtime.Serialization.ni.dll LoadedModule[220]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\SMDiagnostics\1b144b0155aa14719ac0b83f038abbd5\SMDiagnostics.ni.dll LoadedModule[221]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Servd1dec626#\d842ac6dc0b94d7516b2d43a62b8f4d7\System.ServiceModel.Internals.ni.dll LoadedModule[222]=C:\WINDOWS\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.14393.321_none_baab3cb4359688b4\gdiplus.dll LoadedModule[223]=C:\Prepar3Dv3\Carenavigraph.dll LoadedModule[224]=C:\Prepar3Dv3\Modules\FSUIPC4.dll State[0].Key=Transport.DoneStage1 State[0].Value=1 FriendlyEventName=Stopped working ConsentKey=APPCRASH AppName=Lockheed Martin® Prepar3D® AppPath=C:\Prepar3Dv3\Prepar3D.exe ApplicationIdentity=00000000000000000000000000000000 MetadataHash=1432479682

Thanks a lot for the prompt reply. The WORK-GROUP name in the MAIN PC had a hypen that was not included in the WORKGROUP name in the SECOND PC. So I edited that one. Also I went ahead and followed the recomendation in the instructions and edited the [Config] section of the WideClient.ini file (SECOND PC) with: ServerName=AE-ABAJO-PC (Name of my MAIN PC) Protocol=TCP This fixed my problem. Lesson learnt: Pay attention to hypens Also, interestingly, as far as moving files, mapping drives, etc, I did not notice anything wrong with the workgropu setting. maybe for those tasks windows is less strict when the difference is a hypen. Who knows...

Yes, I used the same numbers on the fixed DNS IP address on both PC's (FSX and Laptop)