PvA

You made me test once more. Thank you, it works now! Maybe I had a misspelling in the "ServerIPAddr" (what a shame) or in the properties of the IPv4 on the client. The Standardgateway has the IP of the server "rabbit" = 192.168.0.2. That must be correct, I think, because the client wants to make a connection to the server. So I didn´t change it. On the other hand I changed the Standardgateway IP on the server from 192.168.0.1 (schleppi) to 0.2. It was just a shot. If that doesn´t matter, I had a misspelling. If that is the case I am deeply sorry for wasting your time. Entering the name of the server doesn´t work, so it must be an IP Addr. Look at the second log. ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 28/01/15, Time 01:06:27.981: Client name is SCHLEPPI 187 Attempting to connect now 187 Trying TCP/IP addr 192.168.0.2, port 8002 ... 187 LUA: "C:\FsWide\FSWide\Initial.LUA": not found 297 Connection made okay! 406 Connection closed by server! 421 Attempting to connect now 421 Connection made okay! 68781 New Client Application: "VAS_Monitor" (Id=6484) 94958 New Client Application: "FSC" (Id=3744) 140417 ****** End of session performance summary ****** 140417 Total time connected = 140 seconds 140417 Reception maximum: 32 frames/sec, 1147 bytes/sec 140417 Reception average whilst connected: 31 frames/sec, 804 bytes/sec 140417 Transmission maximum: 6 frames/sec, 176 bytes/sec 140417 Transmission average whilst connected: 0 frames/sec, 24 bytes/sec 140417 Max receive buffer = 670, Max send depth = 1, Send frames lost = 0 140417 **************** Individual client application activity **************** 140417 Client 6484 requests: 279 (Ave 1/sec), Data: 5620 bytes (40/sec), Average 20 bytes/Process 140417 Client 3744 requests: 1454 (Ave 10/sec), Data: 65920 bytes (470/sec), Average 45 bytes/Process 140417 ********* Log file closed (Buffers: MaxUsed 3, Alloc 6262 Freed 6262 Refused 0) ********* ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 28/01/15, Time 01:03:30.343: Client name is SCHLEPPI 187 Attempting to connect now 187 LUA: "C:\FsWide\FSWide\Initial.LUA": not found 203 Trying TCP/IP host "RABBIT" port 8002 ... 203 ... Okay, IP Address = 192.168.178.27 <----WRONG IP !!! that´s the wlan IP which is blocked. 21232 Error on client pre-Connection Select() [Error=10060] Connection timed out 21232 Ready to try connection again 22292 Attempting to connect now 48313 ****** End of session performance summary ****** 48313 Total time connected = 0 seconds 48313 Reception maximum: 0 frames/sec, 0 bytes/sec 48313 Transmission maximum: 0 frames/sec, 0 bytes/sec 48313 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 48313 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********

Mhm. So Wideclient needs to have a router. Not simconnect. Well, it´s not too bad, my wlan doesn´t have a problem. I just wanted to see if simconnect/ASN is faster without the routing. But it doesn´t. There is no increase in framerate. This was just a happening besides and it is not causing anything. I´ll switch back to wlan and everthing is fine. Thanks for reply Pete, appreciate your work for so long!

Yes, I tried the right IP, but no success. And yes, there are 2 networks, one for wlan and one direct from the server to the client without going through the router. IPv4 is configured manually for direct (without router) connection. But Wideclient keeps trying the old wlan adress, thats wrong. And of course they cannot communicate through the router because i changed the setting in the router to: not allowed to communicate to each other. I want to use cable for testing purposes. Peter

Hello Pete, the link doesn´t work anymore. The connection via wlan worked between the server and client. For testing purposes I changed the connection to cable. The network is ok, I find any folder in the explorer on the other PC. Simconnect does work too. Only Wideclient doesn´t make the connection to the server. I use the name of the server in the .ini, so it should find it automatically, doesn´t it. Protocol=TCP. ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 27/01/15, Time 12:27:01.948: Client name is SCHLEPPI 188 Attempting to connect now 188 LUA: "C:\FsWide\FSWide\Initial.LUA": not found 188 Trying TCP/IP host "RABBIT" port 8002 ... 188 ... Okay, IP Address = 192.168.178.27 21232 Error on client pre-Connection Select() [Error=10060] Connection timed out 21232 Ready to try connection again 22262 Attempting to connect now 44414 ****** End of session performance summary ****** 44414 Total time connected = 0 seconds 44414 Reception maximum: 0 frames/sec, 0 bytes/sec 44414 Transmission maximum: 0 frames/sec, 0 bytes/sec 44429 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 44429 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* The IP Address is wrong. How can that be? Peter