Tom_G_2010

I will be test driving LINDA this weekend to see what I can do with it. Additionally, Paul showed me how to pull a list of all the LVars from an add on, and I also trapped the above code using the logging functions in FSUIPC and lua. I have tested "GAUGE_ANUM_MASTER_CAUTION" setting it to both 1 and 0. As I thought it would it illuminates or extinguishes the warning lamp. However, the master caution system no longer functions properly after that absent that timer value that is set with "GAUGE_ANUM_MASTER_CAUTION_TIMER" That seems to determine how long the system waits before it rechecks the various systems that might trigger an alarm. So, the big mystery to solve, I think, is what programming, wizardry, or voodoo do I need to code in my lua script to calculate that timer value???

Paul and Gunter, between the two of you and Pete I may actually get to the point where I have a clue about this lua stuff THANKS!!!!!! With the help the two of you have provided I have almost all my basic switch functions up and running on my King Air. This weekend I'll be baning my head agast the keyboard trying to figure out how Carnado implements timers in their code... http://forum.simflight.com/topic/72914-carenado-king-air-c90-switch-timers/ Again, THANKS!

I have been working on a script to bring as many of the panel switches on my Carenado King Air C90 out to my sim pit hardware as possible. I have a large number of them working but have hit road blocks on three or four of them. Those would be the Master Caution, Master Warning, Fuel Transfer Test, and Wiper Park switches. The first three have some type of timer in play and that is where this evenings head scratching is coming from... I'll tackle the Wiper Park after I get these timer based switches working . . . When I try to trap the LVars as I press the buttons in the cockpit view there seem to be four lines that always appear. 370845 LUA.1: L:EX500_LocalTime=0.62591117011176 370908 LUA.1: L:Time_Cont_car =3846 370986 LUA.1: L:GAUGE_ANUM_MASTER_WARNING_TIMER=2265.2802124023 371048 LUA.1: L:GAUGE_ANUM_MASTER_WARNING=0 [/CODE] The first appears to check the current local time, it was shortly after 12:30am when I captured these log entries. The second line I'm not sure about at all. The third sets a timer value ( I assume a delay before the Master Warning system does another system check and re-illuminates (assuming alarm conditions still exist). And, the last line of code extinguishes the lamp. I get similar code for the Master Caution as well, and only a slight variation for the Fuel Transfer Test switch. At a point several log events later the Master Warning comes back on as expected since alarm conditions have not cleared [CODE] 382935 LUA.1: L:GAUGE_ANUM_MASTER_WARNING=1 [/CODE] Each time I click one of the switches I see a similar sequence only with the values progressively higher. Here's the click of the Master Caution that I did only a moment after the above [CODE] 384932 LUA.1: L:EX500_LocalTime=0.62981561024984 385010 LUA.1: L:Time_Cont_car =4099 385073 LUA.1: L:GAUGE_ANUM_MASTER_CAUTION_TIMER=2279.2806396484 385135 LUA.1: L:GAUGE_ANUM_MASTER_CAUTION=0 [/CODE] [CODE] 396944 LUA.1: L:GAUGE_ANUM_MASTER_CAUTION=1 [/CODE] Has anybody seen this or maybe cracked the code? It would seem for me to be able to make these work on external switches I'll need to calculate that timing value and I can not figure out how it is arrived at. Thanks! Tom G.

That was it! THANKS!!! I can't believe I got bit by something so basic... :oops: I now have a new tool in the lua tool box! I'm off to work now, but with visions of lua scripts dancing in my head! :mrgreen:

I am in the process of learning how to use lua scripting. I've been reading the doc's and reviewing several other users contributed scripts. I've written some basic scripts now myself. One function I have not figured out how to use properly is "ipcparam". I gathered from review of several other scripts and the documentation that it reads a parameter that is sent to a lua script and can be used in things like if/then/else statements. With that idea I wrote a variety of very simple test scripts. Here's one that I used: ipc.display("PARAM TEST START") ipc.sleep(2000) if ipcparam == 1 then ipc.display("PARAM 1") ipc.sleep(2000) elseif ipcparam == 2 then ipc.display("PARAM 2") ipc.sleep(2000) elseif ipcparam == nil then ipc.display("PARAM IS NULL") ipc.sleep(2000) else ipc.display("PARAM 1, 2, or NUL NOT DETECTED") ipc.sleep(2000) end ipc.display("PARAM TEST END") ipc.sleep(2000) [/CODE] What I'm not understanding is how to send the parameter to the script. After bouncing some ideas around with a more experienced script writer I did the following in hopes that this was the proper method. I assigned a button via FSUIPC to launch the above script (C90 TEST.lua) by selecting "[i]lua C90 TEST[/i]" in the "[i]Control sent when button pressed[/i]" drop down menu, and set the [i]Parameter[/i] entry for that button to [i]1[/i]. What I hoped to see, of course, was my displayed message of "[b]PARAM 1[/b]". That's not what happened though. No matter what I set the parameter value to 0, 1, 2, 3, etc. I got the "[b]PARAM IS NULL[/b]" message. So, obviously I'm not doing this right, or ipcparam reads values from some other source, or it is not intended for the purpose I thought it was. Any advice, direction, wisdom, or insight (or a dope slap) would be greatly appreciated. Tom G.

Thanks Very Much for the explanation and sample scripts! I've got a long way to go on the lua learning curve, but you've certainly given me another push in the write direction. As of this morning I have many of the functions in my Carenado King Air C90 working thanks to your help. I'm still having trouble with a few they have that use timers, but thats not so much lua related as it is how Carenado has the application coded. Again Thanks! Tom G..

Paul, If I might press you for just one more pointer. And, for this I have been reading the doc's and looking at other peoples scripts and I fear I'm just to thick headed for it to sink in. My question is with regard to the proper use of ipcparam and how to get FSUIPC to pass parameters to it, if in fact that is what it is for. I've been looking at several sample scripts and reviewing them against the lua documentation in an attempt tp better educate myself. I'm seeing a number of scripts that appear to use ipcparam to collect some form of parameter. Am I correct about that? And, if so, what settings in FSUIPC would be used to get a button to pass a parameter to a script such that ipcparam could then read it? Thanks! Tom G.

Paul, Thanks again for your help, I now have it working!!! Tom G.

Paul, Thanks! I'll give those ideas a test drive tonight. I'm working on a script to interface my panels to a Carenado C90 and I have much of it working but the code is very slow since it all executes with each key press. Being able to detect a unique parameter from each of the buttons will streamline it quite a bit. Tom G.

I have been reading through the LUA library and other FSUIPC doc's to see if I can figure this out but so far it is eluding me. If I enter a parameter value for example "2" on a button assignment in FSUIPC, let's say Joy 3 button 21 and use that button to launch a LUA script, how do I read that parameter in my lua script? I am trying to write a common script to be used by several buttons and want to use if statements in the script to execute a variety of different actions based on the parameter value assigned to each button. If someone can point me in the right direction that would be great. Thanks! Tom G.

Questions answered with a more thorough read of the lua doc's, study of other peoples scripts, and the help of another user via a different post.

Yes Sorry about the "Main Panel" in my code example above. The correct code did read "Virtual Cockpit" I copied an the wrong text into the post above. However, having read your reply, I did find my error. It was not including the " - View 00" portion. I was under the mistaken impression that the view name had to only include the view's title and did not realize the it also required the numeric view identifier. All is working now. Thanks! Tom G.

I may be misunderstanding the proper use of this lua code so I might be on a wild goose chase. Hope Not... In my sim setup I have two monitors. Monitor 1 is the primary and sits above monitor 2. The primary/top monitor (1) handles my out the window view and I display an undocked Virtual Cockpit on it taking up the entire screen. The second monitor (2) is were I run FSX with a docked view of the main instrument panel. I found a code sample in the Example LUA Plugins file called "TileSix" that showed how to position undocked windows and I thought this might save me having to manually drag and size my undocked virtual cockpit view each time. Based on that sample I added the code line below to a lua script I called testVCposition.lua and assigned a button to launch it. When I press the buttoin, no change to my VC view occurs. Am I using this incorrectly, or not understanding its intended use? here's my tesVCposition.lua file ext.position("Main Panel", 1, 1, 99, 99, 1) [/CODE] here's the log from when I launch it: [CODE] ********* FSUIPC4, Version 4.853 by Pete Dowson ********* User Name="Tom Gauvin" User Addr="xxxx@xxxx.xxx" FSUIPC4 Key is provided WideFS7 Key is provided 322470 System time = 30/09/2012 00:03:54, Simulator time = 00:01:12 (04:01Z) [Continuation log requested by user] Running inside FSX on Windows 7 Module base=59E70000 329475 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules estVCposition.lua" 329475 LUA.0: ...rosoft Flight Simulator X\Modules estVCposition.lua:1 329475 LUA.0: Global: ipcPARAM = 0 329475 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules estVCposition.lua" 614878 Sim stopped: average frame rate for last 292 secs = 18.3 fps 620619 LogOptions changed, now 00000000 00000001 [/CODE] If I can get this to work I would like to place it in my ipcready.lua file hoping it will position and size the window for me any time the aircraft is loaded and ready to fly.

Pete, I found the solution to the problem. I missed the line in the config file when I was reviewing it, hence my original question. However, the issue was that it was set to 0,0,0,0. I'm wondering what might have caused that??? Anyway, I've fixed it now and all seems to be ok. Tom G.

Pete, I am trying to use the FSUIPC logging feature to monitor and log some outputs from FSX. I've done so on many past occasions with no issues. However, this time when I use the "Send to console window" option the console window appears to flash on screen for a second and then it shrinks to a very small sliver on the screen that I can not seem to stretch or drag. Is there a setting in on of the FSUPC files that contains the default or last position of the console window that I might edit to resolve this? Thanks! Tom G.

Second Followup: Pete, I was able to test the button functions through WideFS using a spare Bodnar card and all seems to be working as designed. I can send button functions from client to server without any issues. I also heard back from Alan about his FS2Phidget software and he confirmed that it does not function as a direct Input device or have a Dinput driver. While I don't have a Phidgets hardware device with button inputs, FS2Phidget does have an emulator function so I was able to test at least that much and there didn't appear to be any problems or conflicts. That emulator, of course, does not provide a sufficient test so I'll be looking at my budget to see if I can move the purchase of one up in the plan. Unfortunately, my weekend schedule has been changed and I won't have the time I was hoping for to do the house keeping on the pc software. I am hoping to do some of that during the upcoming week and will do further testing when done. So at this point it would appear, barring any problem with the future Phidget hardware test, that I have a working solution provided I launch the apps in the proper sequence. I will follow up again after I can perform the next round of testing. Thanks again for your assistance with this!!!

Quick Followup: With ButtonScanInterval set to 0 the crash does not occur regardless of the start up sequence. I started everything up before leaving for work and almost two hours later all is still running. I think my next trouble shooting step might be to set ButtonScanInterval back to 20, use the WideClient first start up sequence and then find a way to test some functions that will be seen as a button input. Actually, looking back at your last reply, I will also have to go through the pc and make sure there are no joystick drivers or other bits of FSX related stuff left on there. It should all be clean now, but the pc I'm using has been my test bed for several FSX apps and add ons and as such may have some unwanted software remnants that I missed when uninstalling things. I'll do some further house cleaning this weekend and see what that gains me, and then move on to testing some button input scenarios.

Pete, Thanks for the clarification on sequence. I'm new to WideFS and for some reason thought I should have the server up before the Client. Regarding the Button Scan edit, I'll give that a try and let you know what I find. I'll also see if I can get Allan's attention to ask for clarification on how FS2Phidget functions with regard to Direct Input or use of a Dinput driver. Tom G.

Pete, Sorry I missed that typo this morning. That's what I get for trying to edit code before having my first cup of coffee. This evening I corrected the typo and launched the client with the "debug all" active. I attempted different sequences for launching FSX/WideServer, WideClient, and FS2Phidget. I found that FS2Phidget has to be launched after WideClient or it does not see the FSX connection. I did find one sequence where WideClient seems to keep running: If I launch WideClient, then Fs2Phidget, and third launch FSX/WideServer all seems to work as expected. I have had all three running launched in that sequence for about 20 minutes now without any issues. However, if I launch FSX/WideServer then the WideClient followed by FS2Phidget, WideCLient will crash about a minute after FS2Phidget runs. The detailed log showing what happened when it crashed is attached. WideClient Log While Connected to FSX.zip The client crashed as before after about a minute of run time. Here's what came up in the Windows Event Viewer: Log Name: Application Source: Windows Error Reporting Date: 3/15/2012 6:36:28 PM Event ID: 1001 Task Category: None Level: Information Keywords: Classic User: N/A Computer: TandJTabletPC Description: Fault bucket 2884856222, type 1 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: WideClient.exe P2: 6.9.5.3 P3: 4f594fa2 P4: DINPUT.DLL P5: 6.1.7600.16385 P6: 4a5bd9c0 P7: c0000005 P8: 00013f1d P9: P10: Attached files: C:\Users\Tom and Judy\AppData\Local\Temp\WER6061.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\Tom and Judy\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_WideClient.exe_411bba4d0d15b94f38d93c0cb94ce5684d7c93_0335b4a8 Analysis symbol: Rechecking for solution: 0 Report Id: 40470422-6eef-11e1-912f-e02a822e11da Report Status: 0 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Error Reporting" /> <EventID Qualifiers="0">1001</EventID> <Level>4</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-03-15T22:36:28.000000000Z" /> <EventRecordID>308583</EventRecordID> <Channel>Application</Channel> <Computer>TandJTabletPC</Computer> <Security /> </System> <EventData> <Data>2884856222</Data> <Data>1</Data> <Data>APPCRASH</Data> <Data>Not available</Data> <Data>0</Data> <Data>WideClient.exe</Data> <Data>6.9.5.3</Data> <Data>4f594fa2</Data> <Data>DINPUT.DLL</Data> <Data>6.1.7600.16385</Data> <Data>4a5bd9c0</Data> <Data>c0000005</Data> <Data>00013f1d</Data> <Data> </Data> <Data> </Data> <Data> C:\Users\Tom and Judy\AppData\Local\Temp\WER6061.tmp.WERInternalMetadata.xml</Data> <Data>C:\Users\Tom and Judy\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_WideClient.exe_411bba4d0d15b94f38d93c0cb94ce5684d7c93_0335b4a8</Data> <Data> </Data> <Data>0</Data> <Data>40470422-6eef-11e1-912f-e02a822e11da</Data> <Data>0</Data> </EventData> </Event> [/CODE]

Replaced as requested edited as follows: [Config] ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port=8002 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 Window=75,81,601,493 [Sounds] Path=C:\WideCLient_2\Sound\ Device1=Primary Sound Driver Device2=Speakers / HP (IDT High Definition Audio CODEC) Device3=Headphones (RTC) (IDT High Definition Audio CODEC) [User] Log=DebgAll [/CODE] I launched WideClient and then FS2Phidget 4.3.66. After about 60 seconds the crash occurred having done nothing in FSX or FS2Phidgets. Here's the resulting log [CODE] ********* WideClient Log [version 6.953] Class=FS98MAIN ********* Date (dmy): 15/03/12, Time 06:47:56.840: Client name is TANDJTABLETPC 234 LUA: "C:\WideCLient_2\Initial.LUA": not found 234 Attempting to connect now 765 Server = HP410_KITCHENPC 827 Trying TCP/IP host "HP410_KITCHENPC" port 8002 ... 827 ... Okay, IP Address = 192.168.1.5 843 Connection made okay! 858 Connection closed by server! 858 Attempting to connect now 858 Trying to locate server: Need details from Server Broadcast 5772 Server = HP410_KITCHENPC 5772 Trying TCP/IP host "HP410_KITCHENPC" port 8002 ... 5772 ... Okay, IP Address = 192.168.1.5 5772 Connection made okay! 9969 New Client Application: "FS2Phidget" (Id=1424) [/CODE] I thought at first the crash only occurred after I ran FSX functions that were monitored by FS2Phjidget but that appears not to be the case. If I launch the app and simple wait long enough (about 60 seconds) the crash occurs. As such I suspect you may be able to reproduce the event. I am running Win7 64Bit on both the server and client pc's. Please let me know of any further information I might provide. Is there any error trapping log in the Win 7 OS that might provide further clues??? I'm headed to work now so my be somewhat delayed before responding next but will reply back as soon as possible. Thanks! Tom G.

Pete, I've been using FSUIPC4 (registered) for some time now on my sim pc with FSX. Just yesterday I loaded the latest version and added a registration for WideFS. I loaded the WideClient on another PC. The first app I'm using this for is Allen Dyers FS2Phidgets V4 to drive some Phidget I/O cards for LEDs and Servos. All went well yesterday, in fact great. FS2Phidget connected through WideFS/FSUIPC to FSX and worked well. After work today I went to resume my efforts and am running into a windows error with the client app. It boots and connects right away as expected. But, within about 60 seconds of launching the FS2Phidget app, WideClient stops working and a windows error pops up stating "FS Eliminator for FSUIPC client application has stopped working". The only other app I have installed on my second pc at the moment that would take advantage of WideFS is a demo of one of the GA panels from Project Magenta. It seems to run fine WideClient stays up. It appears to only be when I load the FS2Phidget App that it crashes. As such I suspect that app is the source of the problem and will be reaching out to the developer for assistance, but thought it might be wise to check with you as well in case you had seen this before or had any thoughts on trouble shooting the issue. Thanks in advance! Tom G. [Config] ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port=8002 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 [Sounds] Path=C:\WideClient\Sound\ Device1=Primary Sound Driver Device2=Speakers / HP (IDT High Definition Audio CODEC) Device3=Headphones (RTC) (IDT High Definition Audio CODEC) [/CODE] [CODE] ********* WideClient Log [version 6.94] Class=FS98MAIN ********* Date (dmy): 14/03/12, Time 20:25:56.241: Client name is TANDJTABLETPC 219 LUA: "C:\WideClient\Initial.LUA": not found 234 Attempting to connect now 1248 Trying to locate server: Need details from Server Broadcast 1248 Failed to connect: waiting to try again 3261 Attempting to connect now 13369 Server = HP410_KITCHENPC 13385 Trying TCP/IP host "HP410_KITCHENPC" port 8002 ... 13385 ... Okay, IP Address = 192.168.1.5 13416 Connection made okay! 18049 New Client Application: "FS2Phidget" (Id=1068) [/CODE] [CODE] ********* WideServer.DLL Log [version 7.81] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 14/03/12, Time 20:25:51.073: Server name is HP410_KITCHENPC 15631 Initialising TCP/IP server 15631 Initialising UDP/IP server 16130 Broadcasting service every 1000 mSecs 16707 Incoming connection Accepted ok (skt=11412) TCP 17066 Connected to computer "TANDJTABLETPC" running WideClient version 6.940 (skt=11412) TCP 47143 Restarting service due to zero reception! 89576 Closing down now ... Memory managed: Offset records: 129 alloc, 128 free Read buffer usage: 11 alloc, 11 free, max in session: 1 Write buffer usage: 1172 alloc, 1172 free, max in session: 1 Throughput maximum achieved: 19 frames/sec, 640 bytes/sec Throughput average achieved for complete session: 3 frames/sec, 91 bytes/sec Average receive rate from "TANDJTABLETPC": 0 frames/sec, 6 bytes/sec ********* Log file closed ********* [/CODE] [CODE] ********* FSUIPC4, Version 4.81 by Pete Dowson ********* User Name="Xxx Xxxxxx" User Addr="xxx@xxxxxxxxxx.xxx" FSUIPC4 Key is provided WideFS7 Key is provided Running inside FSX on Windows 7 Module base=61000000 764 System time = 14/03/2012 20:24:44 780 FLT UNC path = "\\HP410_KITCHENPC\Users\Flight Sim\Documents\Flight Simulator X Files\" 827 Trying to connect to SimConnect Acc/SP2 Oct07 ... 827 FS UNC path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 1264 LogOptions=00000000 00000001 1264 Wind smoothing fix is fully installed 1264 G3D.DLL fix attempt installed ok 1264 SimConnect_Open succeeded: waiting to check version okay 1264 Trying to use SimConnect Acc/SP2 Oct07 5429 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 5429 Initialising SimConnect data requests now 5429 FSUIPC Menu entry added 5491 \\HP410_KITCHENPC\Users\Flight Sim\Documents\Flight Simulator X Files\KTRG BONANZA.FLT 5491 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Carenado BONANZA V35B\Carenado_V35.AIR 6880 Weather Mode now = Global 24289 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\C172\Cessna172SP.AIR 52401 Aircraft="Cessna Skyhawk 172SP Paint2" 52416 System time = 14/03/2012 20:25:35, Simulator time = 20:24:48 (01:24Z) 67689 Starting everything now ... 67720 Advanced Weather Interface Enabled 75177 Weather Mode now = Theme 75614 Weather Mode now = Global 144972 Sim stopped: average frame rate for last 81 secs = 20.8 fps 159620 System time = 14/03/2012 20:27:23, Simulator time = 20:26:09 (01:26Z) 159620 *** FSUIPC log file being closed Average frame rate for running time of 82 secs = 20.8 fps G3D fix: Passes 15694, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 129 Allocs, 129 Freed ********* FSUIPC Log file closed *********** [/CODE]

Pete, I've been doing some more experimenting back and forth in a range between 80 and 100. I found 70 too short, and a bit more experimentation is showing me that 100 may be a bit long as it occasionally catches a tail end click as a fast when I'm slowing down to zero in in a specific heading. I would go with 90 as a starting point. Tom G.

THAT'S DONE IT! ALL IS WORKING NOW!! Pete, the Code came from post #25 of this thread, your 14 June 2011 - 06:58 AM reply post I had a little bit of a time getting the fast timing limit set to trigger fast movement, but did get it. I threw in some logging lines to show me the time difference when the if statement triggered and experimented until I had a comfortable timing. It's at 100 now but that's on the test bench so I may fine tune that further when I get the encoders installed in the real panel and as I gain experience. THANKS!!! For all your help and patience. Tom G.

I've removed the button assignment that launched the HIDDemo from the FSUIPC config and added the "IgnoreThese = 3.31, 3.30" back in. I also removed the HIDDemo and IPCDebug scripts from the modules folder. I re-launched FSX and repeated the test of two clicks ccw and two clicks cw. No change, still only decrimenting with ccw and no action with cw. The IPCReady log and FSUIPC log are below. I may try to place a couple other log statements in to look at some of the other variables to see if I can understand more of the script myself. Any further thoughts? ********* LUA: "ipcReady" Log [from FSUIPC version 4.734] ********* 30248 System time = 11/10/2011 18:11:58, Simulator time = 18:11:32 (22:11Z) 30248 LUA: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" 34913 LUA: Datalength=6 Buttons=1073741824 PrevButtons=0 34944 LUA: Datalength=6 Buttons=1073741824 PrevButtons=1073741824 34975 LUA: Datalength=6 Buttons=0 PrevButtons=1073741824 36285 LUA: Datalength=6 Buttons=1073741824 PrevButtons=0 36317 LUA: Datalength=6 Buttons=1073741824 PrevButtons=1073741824 36348 LUA: Datalength=6 Buttons=1073741824 PrevButtons=1073741824 36379 LUA: Datalength=6 Buttons=0 PrevButtons=1073741824 37892 LUA: Datalength=6 Buttons=2147483648 PrevButtons=0 37923 LUA: Datalength=6 Buttons=2147483648 PrevButtons=2147483648 38001 LUA: Datalength=6 Buttons=0 PrevButtons=2147483648 39218 LUA: Datalength=6 Buttons=2147483648 PrevButtons=0 39265 LUA: Datalength=6 Buttons=2147483648 PrevButtons=2147483648 39296 LUA: Datalength=6 Buttons=2147483648 PrevButtons=2147483648 39327 LUA: Datalength=6 Buttons=0 PrevButtons=2147483648 49733 LUA: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" 49733 System time = 11/10/2011 18:12:17, Simulator time = 18:11:46 (22:11Z) ********* LUA execution terminated: Log Closed ********* ********* FSUIPC4, Version 4.734 by Pete Dowson ********* User Name="Tom Gauvin" User Addr="tom@thegauvins.com" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired Running inside FSX on Windows 7 Module base=61000000 Wind smoothing fix is not installed DebugStatus=15 546 System time = 11/10/2011 18:11:28 546 FLT path = "C:\Users\Tom and Judy\Documents\Flight Simulator X Files\" 592 Trying to connect to SimConnect Acc/SP2 Oct07 ... 592 FS path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 1138 LogOptions=E0000000 0000001D 1138 SimConnect_Open succeeded: waiting to check version okay 1138 Trying to use SimConnect Acc/SP2 Oct07 3868 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 3868 Initialising SimConnect data requests now 3868 FSUIPC Menu entry added 3915 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 3915 C:\Users\Tom and Judy\Documents\Flight Simulator X Files\KTRG 172.FLT 3915 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\C172\Cessna172SP.AIR 4040 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW 13369 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 29219 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 30061 System time = 11/10/2011 18:11:57, Simulator time = 18:11:32 (22:11Z) 30077 Aircraft="Cessna Skyhawk 172SP Paint2" 30248 Starting everything now ... 30264 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 34944 WRITElua 3340, 1 bytes: 01 . 34944 Button changed: bRef=0, Joy=64, Btn=0, Pressed 34944 [Buttons] 51=P64,0,C65880,0 34944 FS Control Sent: Ctrl=65880, Param=0 34944 *** EVENT: Cntrl= 65880 (0x00010158), Param= 0 (0x00000000) HEADING_BUG_DEC 35006 WRITElua 3340, 1 bytes: 00 . 35006 Button changed: bRef=0, Joy=64, Btn=0, Released 35006 [Buttons] 52=U64,0,C65880,0 35006 FS Control Sent: Ctrl=65880, Param=0 35006 *** EVENT: Cntrl= 65880 (0x00010158), Param= 0 (0x00000000) HEADING_BUG_DEC 36317 WRITElua 3340, 1 bytes: 01 . 36317 Button changed: bRef=0, Joy=64, Btn=0, Pressed 36317 [Buttons] 51=P64,0,C65880,0 36317 FS Control Sent: Ctrl=65880, Param=0 36317 *** EVENT: Cntrl= 65880 (0x00010158), Param= 0 (0x00000000) HEADING_BUG_DEC 36410 WRITElua 3340, 1 bytes: 00 . 36410 Button changed: bRef=0, Joy=64, Btn=0, Released 36410 [Buttons] 52=U64,0,C65880,0 36410 FS Control Sent: Ctrl=65880, Param=0 36410 *** EVENT: Cntrl= 65880 (0x00010158), Param= 0 (0x00000000) HEADING_BUG_DEC 45037 *** EVENT: Cntrl= 65732 (0x000100c4), Param= 0 (0x00000000) EXIT 45177 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 51261 System time = 11/10/2011 18:12:19, Simulator time = 18:11:46 (22:11Z) 51261 *** FSUIPC log file being closed Average frame rate for running time of 16 secs = 29.8 fps Memory managed: 25 Allocs, 25 Freed ********* FSUIPC Log file closed ***********

I'll go back through everything this evening and make sure there aren't any other lua scripts in modules folder. There should not be anything beyond IPCReady, IPCDebug, and HIDDemo since I've never used lua before, but I'll make sure. That was how I launched the HidDemo lua script based on one of your earlier posts. Since it seems that has now proven the buttons are sending correctly I'll assume I can stop using it. Tests this morning with or without HidDemo running still had no cw activity so I don't think it was interfering. While re-reading my post from this morning I also just noticed that I had not added one update line to the FSUIPC Config Buttons section that you also earlier suggested, "IgnoreThese=3.30, 3.31". I will add that back in and retest before posting again. One other quick question. Above you commented, How hard is it to modify the logging statement to do that? It would seem that would make it easier to follow.