planenut

Hi Alex, Well, things have gotten stranger and stranger. As I previously mentioned, I uninstalled the ERJ until there was a definite fix. The other planes that were affected have been behaving ok with the exception of the QW 787. In that plane the flashing lights had stopped that behavior but one of the problems that remained was that the scratch pad of the RH CDU had a string of V's and W's that looked like this: VWVWVWVWVWVWVWVWVWVW and I could not get rid of them no matter what I did. Even did a uninstall and reinstall. So in essence, the RH CDU was useless. Now here is the strange part. I recently purchased the A2A Accufeel program and installed it. As soon as I did, the QW 787 CDU problem went away and all is back to normal. Just took a chance and reinstalled the ERJ and now have no problems with it either. All is ok. Seems obvious that there was something wrong with my setup/system but why installing another program would fix things is a mystery to me. Anyhow, all is good now so go figure. Thanks for all your interest and efforts to solve this. Really appreciate it. Jim

HI Alex, I didn't try any default planes but did a random sampling of my payware planes. Found problems on the A2A Cherokee, QW 787, CRJ 700. Other planes didn't indicate any problems but I didn't check them all. In my original post I didn't mention that after the 3rd uninstall, download, and reinstall the wipers were jumping again but the emergency light switch was ok and not jumping. The thing in common with all the planes that acted up was that the 1 second interval regular as clockwork. The A2A Cherokee was particularly strange.in that the yoke was jumping while it was still secured with the seatbelt. When the yoke was released from the seatbelt it was steady but there was a flashing white box around the GPS/NAV switch (with and without the yoke secured). Also on all the planes that did this was that it was happening with and without power applied. Jim

Hi Alex, Thanks for the reply. Yes, it is the same with the ERJ135. What is really strange is that I was having similar problems with other planes such as the A2A yoke jumping at that 1 second interval, some other planes had some lights flashing - same interval. Those problems started with the ERJ installation. I have subsequently uninstalled the ERJ and that seemed to fix the other planes too. Thanks for the clarification on the file size. I'm hesitant to reinstall without a definite fix. If no one else has this problem then maybe there is something wrong with my system. Seems like quite a coincidence that other planes were affected too. Jim

The installer is: erj135-145xr-p3dv4-2.exe Jim

Should have been more specific. This is on the ERJ145XRJ. Jim

I received an email stating that there is a ERJ SP out now. I uninstalled the version I purchased in April, downloaded and installed the latest version - supposedly with the SP and installed. The windshield wipers kept jumping for about an inch or two every second while in the parked position. Did this with and without power on the plane and wiper switch off. Uninstalled and redownloaded the plane again. The wipers stopped jumping but now the emergency light switch jumps from Off to Arm every second just like the wipers were doing. Can't turn the lights to On. It is now on the 3rd download and still doing it. Any ideas? The other thing I am wondering about is that when I originally bought the plane back in April, the download file size was 144.71 MB. The latest that I just downloaded has the same file size. Normally any updates have a different file size. So I'm just curious if I do actually have the SP version. Thanks. Oh yeah. I'm using P3D v4.3 with Win 10. Jim

Hi, Finally got it done. My problem was that I didn't RTFM since I had installed the updates many times before. I was trying to install directly from WinZip but as explained in the Installation Section, once I sent it to the desktop and then selected Run as Administrator, it worked. Jim

Hi Pete, I'm currently using FSUIPC v5.121B for P3D v4.1 and am trying to upgrade to v5.122. When trying to install after downloading, I get a message stating: "The program doesn't have sufficient privileges to complete the installation. Please re-run the installer in your Administrator account and using "Run as Administrator". I always run everything as Administrator but in this case I see no options to do that. This is first time I've encountered this in installing FSUIPC. Thanks for any guidance on this. Jim

I have a general idea of how to set the axis of various levers I like to use for "Gear up & down", "Parking Brake", and "Spoilers extend and retract". I have successfully had these programmed ok before but with much patience and trial and error. The question I have, is what is the proper sequence for accomplishing this. In other words, do I select the controls to be sent, then move the levers and select the "from" and "to", or check the "up" and "down" boxes first. I have read the procedure for this on page 44 in the manual, but am just not sure of the proper sequence of the required actions. Also I have noticed that if I manage to get the landing gear working properly, and then try to get say the parking brakes set, then the landing gear doesn' work right and have to go back and do the landing gear again. Is there a step between programming two different levers that I have to perform so that one doesn't affect the other when setting these things up. Thanks for any guidance anyone can give me on this. Thanks. Jim

Finally figured out the problem. Somehow the number 2 mixture control switch on the Saitek throttle had gotten set to "Trim Down", so when the mixture control was all the way down in the cutoff postion, it was engaging the switch. Still don't know how that happened. Probably a malfunction of the "nut" behind the yoke. Jim

I use a Saitek yoke with everything calibrated thru FSUIPC. I have assigned the switch on left side of yoke to control elevator trim. It has always worked ok except for adjusting the trim on the A2A Cherokee. The trim has always worked very slowly on only this plane. I was watching a review of the new A2A C182 by Froogle on Youtube and he came up with a method of speeding up the trim on that plane by using the FSX controls buttons and FSUIPC together. Seemed to work for him. I followed his instructions but it totally screwed up my trim. Now my trim goes full down (without me touching the controls and I can't control it. It stays at full down (on all planes) and won't adjust although the trim wheel does try to move. I deleted the .dll file in FSUIPC and tested it just with the FSX controls and it works ok. Downloaded and reinstalled FSUIPC but it is still messed up. Am totally at a loss here. Does anyone have any suggestion on what I can do to fix this? Thanks. Jim

Hi Andy, Good to know. Thanks for the info. Jim

Hi Pete, It was indeed the button on the lever assigned to the gear up function. Strange because I had never (to my knowledge) programmed this. In fact, I have never used this throttle quadrant for anything. Oh well, it's fixed now. I also got the parking brake working correctly by assigning the proper range of movement. Thanks for the help. Jim

On a Saitek throttle quadrant I have assigned the three levers (throttle, prop, mixture) to operate the landing gear, spoilers, and parking brake. The problem I am having is that when I retract the spoilers, it also retracts the landing gear. This only happens when the spoiler lever is brought all the way back to the stop. It doesn't have any other effect on the gear. In other words, once the gear is retracted, the spoiler lever doesn't affect it. I can recycle the gear lever and the gear extends ok. Any idea how I can correct this? The other question I have is concerning the mixture lever that I assigned to operate the parking brakes. I can't seem to operate it so that the parking brake is on or off without recycling the lever full range in both directions. I have to move the lever all the way forward then all the way back to engage the parking brake. To release the parking brake I have to again move the lever all the way forward and all the way back. Is there a way to engage the parking brake on by just pushing the lever forward and to disengage by simply pulling it back? Thanks, Jim

Hi Pete, Sorry. I just now discovered the exact reference on using "range" assignments that you tried to explain to me. Guess I couldn't see it for looking. I'll press on and try to follow directions this time. Jim

Hi Pete, I can seem to set any axis I want except for the landing gear. The problem I am having is that there is no landing gear selection in the drop down list. I select Rescan, Send direct to FSUIC Calibration, move the lever, activate the drop down list but no gear selection. I've gone through the manual but can't find the solution to my problem. Do you have any more guidance for me. Thanks, Jim

Thanks Pete. My FSUIPC guide is not seldom used. Guess I didn't read it carefully enough. I'll delve into it again and see what I can glean from it. Jim

I am currently using a Saitek yoke and a CH throttle quadrant. I have one of the quadrants switches programmed to operate the landing gear but I would like to assign the Saitek throttle (which connects to the yoke) as the landing gear control. Can this be done in FSUIPC? I programmed the Saitek mixture control to use as a spoiler control and it works fine. I cannot, however, seem to be able to program the Saitek throttle lever to operate the gear. I use FSUIPC for all of my calibrations. Just would like to know if it is at all possible. Thanks Jim

Should have said PMDG 737NGX Jim

Thanks for the advice guys. After looking again I found the selection I was looking for. It was in the drop down list after all - Auto Throttle To Ga. Guess these old eyes missed it the first time. Ian, I am using this for the PMDG 737X. Jim

I'm trying to assign a button on my CH Throttle Quadrant as a TO/GA control. I can't seem to see anything in the drop down list that I can use. Is there somethng that I am missing, and how can I set this up? Thanks. Jim

Just to chime in here - before the FSUIPC update, when selecting the Mouse View option within FS, the mouse wheel automatically became active as a zoom control. After the update the mouse zoom function doesn't work. Just verifying what the OP stated. Jim

Hi Pete, Let me regroup here. I first noticed this "problem" when I went to fly the RealAir Duke and Duke Turbine. I had always used the mouse while in VC to move the selector as they were always in the off position. After the incorporation of the Mouse Look that you recently accomplished, I could no longer use the mouse to move the fuel selector. So I started checking other planes and found that it didn't work with them either. As I now think about it, I'm thinking that most if not all my planes are defaulted to the fuel selector being in the on position because I don't recall having to move the fuel selector. Only in the Dukes. I have found the selections in the FSUIPC switches and buttons listing and have programmed them. They work fine except for the Dukes. Still trying to figure it out for those two planes. I'll keep plugging away. Thanks for your info and help. Jim

Hi Pete, I'm referring to the tank selector lever on the cockpit floor. The problem exists on all planes that have this tank selector - default or addon. All of the other mouse functions work ok. Never had this problem before. Since you can't duplicate the problem it must be something in my setup. I'll keep troubleshooting and will let you know if I come up with something. Jim

Hi Pete, The recent change allowing the Mouse Look function to work when disabling the controller works fine except for one problem I just discovered. That is that the mouse no longer will control the fuel selector in any plane. Right now I have to uncheck the mouse look function in FSUIPC,change the fuel selector, and then re-select the mouse look function. All other actions using the mouse seem to be ok. I can't seem to find a button selection within FSUIPC to control the fuel selectors. Do you know what can be done to prevent having to go through the procedure I explained above. Thanks for any help. Jim