speedbird144

Hi John. Can you clarify Auto-tuning feature, please? “Please note that this feature is only activated when using the auto-start facility, i.e. when MSFS is starting FSUIPC7, which is the default and recommended configuration.” Can you clarify “when MSFS is starting FSUIPC7”? Do I have to start MSFS using default MSFS icon, or FSUIPC7 installer icon? I removed the DetectToConnectDelayAuto ini parameter from the [General] section of FSUIPC7.ini file (before I start FSUIPC7 / MSFS). I added the following to the [General] section of your FSUIPC7.ini file (before you start FSUIPC7 / MSFS): StartUpTuningActive=Yes After these steps should DetectToConnectDelayAuto reappear back in .ini file or not? (it is no longer there after I deleted it and started the sim). When I added StartUpTuningActive=Yes should I start MSFS using MSFS default icon, or FSUIPC7 installer icon? If I start MSFS using default icon FSUIPC does not start. I clearly missing something here. FSUIPC7.ini FSUIPC7 log.txt

Hello John. After installing v7.4.11 I started noticing PMDG 737 freezes in MSFS. I don’t recall it happened with beta 7.4.12. I read on Discord PMDG forum that beta version 7.4.12 addressed some issues with PMDG. I am not sure if FSUIPS has anything to do with these freezes. The also told me, it could be WASM crash. Again , not sure if FSUIPC has anything to do with WASM. PMDG support and I are trying to figure it out these freezes.

"How come you have opted not to install the MF presets file:" To be honest no idea what does this even mean. I do not make any changes to any files. I just installed everything what comes with FSUIPC folder. "Did you install the 7.4.12-beta using the installer or by downloading and replacing the FSUIPC7.exe?" I downloaded ZIP file, extracted and ran it. The installer deleted the current version and then installed the new one. I then selected as I have a registered version. Should I run the installer again using the file included in the answer above?

I have a registered version! I open MSFS via desktop FSUIPC icon. Before I updated FSUIPC to v7.4.12 I never saw console window opening. I am not sure why FSUIPC was already running. I rebooted PC several times, I made sure no processes were running before I start MSFS again. Now when I start MSFS I see that console window. It closes when I am at the main MSFS window before the aircraft selection. Then console minimizes and I got that message that FSUIPC is already running. I do not click or open FSUIPC separately. I just start FSUIPC using desktop icon. What I mean FSUIPC was not (fully) working, when I try to assign buttons or offsets etc, those options not available anymore, it looks like I do not have a registered version of FSUIPC, but I do. I had access to those options earlier but not anymore. I did not make any changes to the SIM or PC. The log is attached. I just noticed I have Console windows opens. I guess this is the problem? FSUIPC7, Version 7.4.12c.txt

Hello again. Something is still going on. When the console window disappears I have got a message that another instances of FSUIPC already running. When I close this error message FSUIPC stops working. I still can open FSUIPC from the taskbar but I cannot open anything like assign any buttons or switches, etc. Shall I reinstall FSUIPC?

That window pops up when I start MSFS. Yes, it does disappear now (it did not before). This console window did not show up before, I started noticing it like 2 days ago. Yesterday this console window remained open all the time even after MSFS fully loads. Several hardware stopped working till I manually start FSUIPC. Looks good today. Console window disappears now. Thanks for explanation.

*** Moved from main support forum to FSUIPC7 support sub-forum *** Greetings. When I start MSFS using FSUIPC icon for MSFS I noticed a small black window pops up and FSUIPC won't start anymore. I have to start FSUIPC manually now. I have not done any changes. It just started happening. I am wondering if this is FSUIPC related issue. I use Version 7.4.12c. Thanks for looking.

Thanks John. I was able to find the right settings in the sim without assigning them in FSUIPC:

Hello. I am also looking for help. I wonder if I can find a solution here. I have TQ from Flightsimpm. I was able to configure Carnk/Mode/IGN selector but I cannot figure out how to configure engine start switches. I did not quite understand what do I have to replace in the example above. It says to replace letter A with the letter of my joystick. My joystick shows letter "K". I replaced all A.s to K: 1=PK,3,C67064,0 -{ENGINE_MASTER_2_TOGGLE}- 2=PK,3,C66301,0 -{TOGGLE_STARTER2}- 3=PK,3,C66495,0 -{TOGGLE_FUEL_VALVE_ENG2}- 4=UK,3,C67064,0 -{ENGINE_MASTER_2_TOGGLE}- 5=UK,3,C66301,0 -{TOGGLE_STARTER2}- 6=UK,3,C66495,0 -{TOGGLE_FUEL_VALVE_ENG2}- 7=PK,2,C67063,0 -{ENGINE_MASTER_1_TOGGLE}- 8=PK,2,C66300,0 -{TOGGLE_STARTER1}- 9=PK,2,C66494,0 -{TOGGLE_FUEL_VALVE_ENG1}- 10=UK,2,C67063,0 -{ENGINE_MASTER_1_TOGGLE}- 11=UK,2,C66300,0 -{TOGGLE_STARTER1}- 12=UK,2,C66494,0 -{TOGGLE_FUEL_VALVE_ENG1}- No I am trying to understand regarding 3, 2, 7 and 6" with the right button number (3=ENG2, 2=ENG1, 7=IGNI/START, 6=CRANK). Like I said start selector works so I think I do not need this part: 7=IGNI/START, 6=CRANK. What numbers am I replacing then? Just numbers 3 and 2? And where do I need to replace them? Like this one: 1=PK,3,C67064,0? Also where do I add all this changes? into INI file? Thank you Below is my FSUIPC with those switches:

Kaspersky devs has reached me out. I sent them files and they are looking into it. I added files to exemption but Kaspersky still does not like it. Will see what they find. Also It started flagging SDK-Python zip folder, also google drive and gmail flagged that foldder as virus (I sent KA files via gmail and google drive).

Greetings. My Kaspersky AV keeps deleting FSUIPC files which was discussed here already. I know it is a false positive. I spoke to Kaspersky but they seems cannot help. I wonder if anyone who has Kaspersky AV figured out how to prevent Kaspersky from deleting (disinfecting) FSUIPC7? I followed all steps Kaspersky suggested steps but it did not help. Thanks for looking.

I reconnected all controls and looks like everything is recognized in FSUIPC now. I noticed controls stopped working in P3D as well. I have a feeling when Asobo pushed update 5 (before the patch) and people started complaining their controls started to fail causing CTD, maybe be something went off in controls settings. So far so good. Will keep playing with it. Thanks for help. Ed

Attached. FSUIPC7.ini FSUIPC7.JoyScan.csv

Ok. Will do that later on today. All controls work perfect in P3D5 though. I know this is not MS2020 and not the same FSUIPC, but just in case.

Hello. Trying to figure out why this paid version does not recognize my controls? Everything was normal with previous free version. The only control is recognized is the yoke. TQ (from Flightsimpm) and rudder pedals (from SlawDevice) no longer recognized. Thanks. FSUIPC7.1.log FSUIPC7.log