Jump to content
The simFlight Network Forums

georgefitz

Members
  • Posts

    16
  • Joined

  • Last visited

Everything posted by georgefitz

  1. The updated GUID values for my various devices that you posted were recognized by FSX. However, I wish to mention the following problem with 2 of my devices. Specially, I have two Thrustmaster MFDs (MFD1 and MFD2) and each MFD has 20 push buttons and 4 rocker push buttons. The problem is that, for both MFDs, buttons 0 to 9 (FSUIPC numbering, top and right side buttons) and the rocker button (20 & 21, located between buttons 4 and 5 in the upper left corner of the MDF) when the button is pushed causes (in addition to the expected command) an unexpected and not programmed event to occurred, e.g. for button 1 the view changes, with button 7 the landing gear toggles, other different events indicated by various FSX control numbers are associated with the other 12 buttons. None of the other 16 buttons exhibit this problem. Included are two log files, one button with an unexpected event and one button without a problem as well as the associated macro file CM1 (1VRS_LDDI). I have recently upgraded to Windows 10, a new VRS upgrade and the new FSUIPC. Not sure what’s causing this problem and how it might be fixed. I have log files for each of the 28 buttons if that would help. no problem button.log problem button.log 1VRS_LDDI.mcro
  2. FSUIPC4.logI have attached my FSUIPC.ini file that includes my F18 Superbug profile and 2 other profiles for a Cessna and a Piper /warrior. I have also included the main marco file (CM5, i.e. F18 cockpit.mcro) and a file (FSUIPC4.JoyScan) which appeared when I installed the latest version of FSUIPC,. I've never seen this file before qith previous versions of FSUIPC, but I'm including it because you mentioned the JoyLetters facility, which I'm afraid I don't know anything about. I have included log files which were produced after I pushed several buttons on the "C" device = F16 MFD1. One other thing I wish to mention is that when button number 1 on both device C and D (MFD1 and MFD2) is pushed the view function is activated (K83, s). I have a few other macro files and lua files that I don't think are important , but I could send you. Hopefully, it is just incorrect GUID values that needs to be updated FSUIPC4.ini F18 cockpit.mcro FSUIPC4.JoyScan.csv FSUIPC4.5.log
  3. I had been using FSUIPC (registered) for a number of years, but then I had stopped doing flight simulation for various reasons. Recently, I have gotten back into it, beginning with upgrading my computer to Windows 10. I have used FSUIPC in conjunction with the VRS add-on for the F18 Superbug. My .ini file for this F18 pretty much covers every button, switch, toggle, lever or whatever in the cockpit. When I started working with FSX again, a few controls, for example master batter toggle (C66241) and the left and right generator/alternator (C66363 and C66364) did not respond (almost all my other controls involve macros). So I decided that maybe I needed to updated my FSUIPC. I have just done so with my registered account and I appeared to have successfully updated my FSUIPC to version 4.975a. However, now none of the commands in my FSUIPC4.ini file are being acted on. The log file shows nothing being detected when any of the buttons on any of my devices are pushed. Should I try to re-install fsuipc 4.975a and does that require an uninstall?
  4. Pete, ok, I've tested version 3, but it did not help. however, someone mentioned that there is another delete key associated with the num pad (which I don't have) it is the num. key which has a key value of 110. I have program a button number 26 as: 42=P0,26,K110,9 and button 0 as: 55=P0,0,K46,9 Button 26 works properly sending the "shift+delete" command, but button 0 still send just a "delete" command. Key log is below, but as far as I can tell the same spurious KEYUP: VK=16 Waiting=0 occurs in both situation. I don't have a clue why shift + Num. send shift + delete but shift + delete send just delete. I still believe it has something to do with the fact that FSX doesn't use the delete key although it does use the shift + Num Pad Delete (.) as a view command: Look (reset to forward view). And I might also wonder why shift + Num. doesn't send the Look command rather than the VRS TacPac Undesignate command? In any case, I appreciate all your help in this matter. Should I go back to using the original version of FSUIPC 4.859? thanks George ********* FSUIPC4, Version 4.859t by Pete Dowson ********* Running inside FSX on Windows 7 Module base=62800000 User Name="George Fitzgerald" User Addr="gbfitzgerald@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 234 System time = 29/01/2013 16:31:58 234 FLT path = "C:\Users\george\Documents\Flight Simulator X Files\" 265 Trying to connect to SimConnect Acc/SP2 Oct07 ... 281 FS path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 593 LogOptions=00000000 00000001 593 SIM1 Frictions access gained 608 Wind smoothing fix is fully installed 608 G3D.DLL fix attempt installed ok 608 SimConnect_Open succeeded: waiting to check version okay 608 Trying to use SimConnect Acc/SP2 Oct07 2902 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 2902 Initialising SimConnect data requests now 2902 FSUIPC Menu entry added 2917 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 2917 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 18236 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.AIR 18236 Weather Mode now = Theme 18236 c:\users\george\documents\flight simulator x files\vrs nantuck sound.FLT 32698 System time = 29/01/2013 16:32:30, Simulator time = 14:19:46 (19:19Z) 32713 Aircraft="Flight Test Aircraft E1" 38298 Starting everything now ... 39702 Advanced Weather Interface Enabled 134332 Sim stopped: average frame rate for last 97 secs = 33.3 fps 143302 LogOptions changed, now 40000000 00000001 143318 [buttons] now profile-specific: 143318 3=P1,8,K187,8 143318 4=P1,1,C66244,0 143318 9=P1,9,K189,8 143318 21=P1,10,K8,8 143318 22=P1,11,K32,10 147951 Button changed: bRef=0, Joy=0, Btn=15, Pressed 147951 [buttons.Flight Test Aircraft E1] 39=P0,15,K38,10 147951 SendKeyToFS(00020026=[ctl+Up], KEYDOWN) ctr=0 147951 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=2 147967 Sending WM_KEYDOWN, Key=38 (Scan code 72), Ctr=1 147967 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 147967 .. Key not programmed -- passed on to FS 147967 KEYDOWN: VK=38, Waiting=0, Repeat=N, Shifts=2 147967 .. Key not programmed -- passed on to FS 148076 SendKeyToFS(00020026=[ctl+Up], KEYUP) ctr=0 148076 Sending WM_KEYUP, Key=38 (Scan code 72), Ctr=2 148092 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=1 148092 KEYUP: VK=38, Waiting=0 148092 KEYUP: VK=17, Waiting=0 148170 Button changed: bRef=0, Joy=0, Btn=15, Released 148170 [buttons.Flight Test Aircraft E1] 39=P0,15,K38,10 152569 Button changed: bRef=0, Joy=0, Btn=0, Pressed 152569 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 152569 SendKeyToFS(0004002E=[shft+Del], KEYDOWN) ctr=0 152569 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 152585 Sending WM_KEYDOWN, Key=46 (Scan code 83), Ctr=1 152600 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 152600 .. Key not programmed -- passed on to FS 152600 KEYUP: VK=16, Waiting=0, Spurious so ignored! 152600 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=0 152600 .. Key not programmed -- passed on to FS 152678 SendKeyToFS(0004002E=[shft+Del], KEYUP) ctr=0 152678 Sending WM_KEYUP, Key=46 (Scan code 83), Ctr=2 152694 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 152694 KEYUP: VK=46, Waiting=0 152694 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 152694 .. Key not programmed -- passed on to FS 152694 KEYUP: VK=16, Waiting=0 152865 Button changed: bRef=0, Joy=0, Btn=0, Released 152865 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 157998 Button changed: bRef=0, Joy=0, Btn=7, Pressed 157998 [buttons.Flight Test Aircraft E1] 29=P0,7,K90,8 157998 SendKeyToFS(0000005A=[Z], KEYDOWN) ctr=0 157998 Sending WM_KEYDOWN, Key=90 (Scan code 44), Ctr=1 158029 KEYDOWN: VK=90, Waiting=0, Repeat=N, Shifts=0 158029 .. Key not programmed -- passed on to FS 158107 SendKeyToFS(0000005A=[Z], KEYUP) ctr=0 158107 Sending WM_KEYUP, Key=90 (Scan code 44), Ctr=1 158138 KEYUP: VK=90, Waiting=0 158232 Button changed: bRef=0, Joy=0, Btn=7, Released 158232 [buttons.Flight Test Aircraft E1] 29=P0,7,K90,8 162319 Button changed: bRef=0, Joy=0, Btn=26, Pressed 162319 [buttons.Flight Test Aircraft E1] 42=P0,26,K110,9 162319 SendKeyToFS(0004006E=[shft+Num.], KEYDOWN) ctr=0 162319 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 162335 Sending WM_KEYDOWN, Key=110 (Scan code 83), Ctr=1 162335 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 162335 .. Key not programmed -- passed on to FS 162335 KEYUP: VK=16, Waiting=0, Spurious so ignored! 162335 KEYDOWN: VK=110, Waiting=0, Repeat=N, Shifts=0 162335 .. Key not programmed -- passed on to FS 162444 SendKeyToFS(0004006E=[shft+Num.], KEYUP) ctr=0 162444 Sending WM_KEYUP, Key=110 (Scan code 83), Ctr=2 162459 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 162475 KEYUP: VK=110, Waiting=0 162475 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 162475 .. Key not programmed -- passed on to FS 162475 KEYUP: VK=16, Waiting=0 162662 Button changed: bRef=0, Joy=0, Btn=26, Released 162662 [buttons.Flight Test Aircraft E1] 42=P0,26,K110,9 168762 KEYDOWN: VK=27, Waiting=0, Repeat=N, Shifts=0 168762 .. Key not programmed -- passed on to FS 168949 Sim stopped: average frame rate for last 25 secs = 38.1 fps 177872 C:\Users\george\AppData\Roaming\Microsoft\FSX\Previous flight.FLT
  5. vrs tacpack is an F18 aircraft (http://www.vrsimulations.com/tacpack.htm), I believe it is dll running. I've tested the test version and it did not help. Furthermore, prior to updating to fsuipc 4859, I was able to use the keyboard shift + delete to get the specific command, now it does not, see key log below. Also, I've tested a shift combo with other keys and they work. the problem seems only to occur with delete. also, I notice the FSX, I believe, does not use the delete key for any commands. the use of the delete key is unique to the VRS aircraft. I have gone to vrs support forums and it appears that others have had a problem with shift + delete not necessarily with fsuipc. I am going to check on vrs forum to check further. ********* FSUIPC4, Version 4.859t by Pete Dowson ********* Running inside FSX on Windows 7 Module base=64EE0000 User Name="George Fitzgerald" User Addr="gbfitzgerald@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 156 System time = 28/01/2013 11:41:05 156 FLT path = "C:\Users\george\Documents\Flight Simulator X Files\" 203 Trying to connect to SimConnect Acc/SP2 Oct07 ... 219 FS path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 546 LogOptions=40000000 00000001 546 SIM1 Frictions access gained 546 Wind smoothing fix is fully installed 546 G3D.DLL fix attempt installed ok 546 SimConnect_Open succeeded: waiting to check version okay 546 Trying to use SimConnect Acc/SP2 Oct07 2949 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 2949 Initialising SimConnect data requests now 2949 FSUIPC Menu entry added 2980 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 2980 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 16536 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.AIR 16536 Weather Mode now = Theme 16536 c:\users\george\documents\flight simulator x files\vrs nantuck sound.FLT 26240 System time = 28/01/2013 11:41:31, Simulator time = 14:19:46 (19:19Z) 26255 Aircraft="Flight Test Aircraft E1" 26255 [buttons] now profile-specific: 26255 4=P1,1,C66244,0 26255 9=P1,9,K189,8 26255 21=P1,10,K8,8 26255 22=P1,11,K32,10 26255 [buttons] now profile-specific: 26255 3=P1,8,K187,8 26255 4=P1,1,C66244,0 26255 9=P1,9,K189,8 26255 21=P1,10,K8,8 26255 22=P1,11,K32,10 32433 Button changed: bRef=0, Joy=0, Btn=2, Pressed 32433 [buttons.Flight Test Aircraft E1] 23=P0,2,K80,8 32433 SendKeyToFS(00000050=[P], KEYDOWN) ctr=0 32449 Sending WM_KEYDOWN, Key=80 (Scan code 25), Ctr=1 32495 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 32495 .. Key not programmed -- passed on to FS 32542 SendKeyToFS(00000050=[P], KEYUP) ctr=0 32542 Sending WM_KEYUP, Key=80 (Scan code 25), Ctr=1 32589 KEYUP: VK=80, Waiting=0 32651 Button changed: bRef=0, Joy=0, Btn=2, Released 32651 [buttons.Flight Test Aircraft E1] 23=P0,2,K80,8 35272 Starting everything now ... 35288 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 35288 FS Control Sent: Ctrl=66416, Param=-1 35288 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 36286 Advanced Weather Interface Enabled 45880 Button changed: bRef=0, Joy=0, Btn=7, Pressed 45880 [buttons.Flight Test Aircraft E1] 29=P0,7,K90,8 45880 SendKeyToFS(0000005A=[Z], KEYDOWN) ctr=0 45880 Sending WM_KEYDOWN, Key=90 (Scan code 44), Ctr=1 45927 KEYDOWN: VK=90, Waiting=0, Repeat=N, Shifts=0 45927 .. Key not programmed -- passed on to FS 46036 SendKeyToFS(0000005A=[Z], KEYUP) ctr=0 46036 Sending WM_KEYUP, Key=90 (Scan code 44), Ctr=1 46083 Button changed: bRef=0, Joy=0, Btn=7, Released 46083 [buttons.Flight Test Aircraft E1] 29=P0,7,K90,8 46083 KEYUP: VK=90, Waiting=0 49047 Button changed: bRef=0, Joy=0, Btn=16, Pressed 49047 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 49047 SendKeyToFS(00020027=[ctl+Right], KEYDOWN) ctr=0 49047 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=2 49063 Sending WM_KEYDOWN, Key=39 (Scan code 77), Ctr=1 49094 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 49094 .. Key not programmed -- passed on to FS 49094 KEYDOWN: VK=39, Waiting=0, Repeat=N, Shifts=2 49094 .. Key not programmed -- passed on to FS 49156 SendKeyToFS(00020027=[ctl+Right], KEYUP) ctr=0 49156 Sending WM_KEYUP, Key=39 (Scan code 77), Ctr=2 49172 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=1 49203 KEYUP: VK=39, Waiting=0 49203 KEYUP: VK=17, Waiting=0 49250 Button changed: bRef=0, Joy=0, Btn=16, Released 49250 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 50357 Button changed: bRef=0, Joy=0, Btn=16, Pressed 50357 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 50357 SendKeyToFS(00020027=[ctl+Right], KEYDOWN) ctr=0 50357 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=2 50373 Sending WM_KEYDOWN, Key=39 (Scan code 77), Ctr=1 50404 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 50404 .. Key not programmed -- passed on to FS 50404 KEYDOWN: VK=39, Waiting=0, Repeat=N, Shifts=2 50404 .. Key not programmed -- passed on to FS 50498 SendKeyToFS(00020027=[ctl+Right], KEYUP) ctr=0 50514 Sending WM_KEYUP, Key=39 (Scan code 77), Ctr=2 50529 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=1 50560 Button changed: bRef=0, Joy=0, Btn=16, Released 50560 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 50560 KEYUP: VK=39, Waiting=0 50560 KEYUP: VK=17, Waiting=0 54414 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 54414 .... Condition (+0,23) = TRUE 54414 SendKeyToFS(00060031=[ctl+shft+1], KEYDOWN) ctr=0 54414 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=3 54414 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=3 54429 Sending WM_KEYDOWN, Key=49 (Scan code 2), Ctr=1 54460 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 54460 .. Key not programmed -- passed on to FS 54460 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=3 54460 .. Key not programmed -- passed on to FS 54460 KEYDOWN: VK=49, Waiting=0, Repeat=N, Shifts=3 54460 .. Key not programmed -- passed on to FS 54460 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54460 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54523 SendKeyToFS(00060031=[ctl+shft+1], KEYUP) ctr=0 54523 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54523 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54523 Sending WM_KEYUP, Key=49 (Scan code 2), Ctr=3 54538 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=2 54538 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=2 54570 KEYUP: VK=49, Waiting=0 54570 KEYUP: VK=17, Waiting=0 54570 KEYUP: VK=16, Waiting=0, Spurious so ignored! 54570 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54570 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54616 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54616 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54679 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54679 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54726 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 54726 .... Condition (+0,23) = TRUE 54726 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54726 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54772 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 54772 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 63352 Button changed: bRef=0, Joy=0, Btn=0, Pressed 63352 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 63352 SendKeyToFS(0004002E=[shft+Del], KEYDOWN) ctr=0 63368 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 63384 Sending WM_KEYDOWN, Key=46 (Scan code 83), Ctr=1 63415 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 63415 .. Key not programmed -- passed on to FS 63415 KEYUP: VK=16, Waiting=0, Spurious so ignored! 63415 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=0 63415 .. Key not programmed -- passed on to FS 63462 SendKeyToFS(0004002E=[shft+Del], KEYUP) ctr=0 63462 Sending WM_KEYUP, Key=46 (Scan code 83), Ctr=2 63477 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 63508 KEYUP: VK=46, Waiting=0 63508 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 63508 .. Key not programmed -- passed on to FS 63508 KEYUP: VK=16, Waiting=0, Spurious so ignored! 63914 Button changed: bRef=0, Joy=0, Btn=0, Released 63914 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 67330 Button changed: bRef=0, Joy=0, Btn=7, Pressed 67330 [buttons.Flight Test Aircraft E1] 29=P0,7,K90,8 67330 SendKeyToFS(0000005A=[Z], KEYDOWN) ctr=0 67330 Sending WM_KEYDOWN, Key=90 (Scan code 44), Ctr=1 67377 KEYDOWN: VK=90, Waiting=0, Repeat=N, Shifts=0 67377 .. Key not programmed -- passed on to FS 67471 SendKeyToFS(0000005A=[Z], KEYUP) ctr=0 67486 Sending WM_KEYUP, Key=90 (Scan code 44), Ctr=1 67518 KEYUP: VK=90, Waiting=0 67580 Button changed: bRef=0, Joy=0, Btn=7, Released 67580 [buttons.Flight Test Aircraft E1] 29=P0,7,K90,8 69483 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 69483 .. Key not programmed -- passed on to FS 69982 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 69982 .. Key not programmed -- passed on to FS 70029 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70029 .. Key not programmed -- passed on to FS 70092 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70092 .. Key not programmed -- passed on to FS 70138 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70138 .. Key not programmed -- passed on to FS 70185 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70185 .. Key not programmed -- passed on to FS 70232 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70232 .. Key not programmed -- passed on to FS 70279 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70279 .. Key not programmed -- passed on to FS 70341 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70341 .. Key not programmed -- passed on to FS 70388 KEYDOWN: VK=16, Waiting=0, Repeat=Y, Shifts=1 70388 .. Key not programmed -- passed on to FS 70388 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=1 70388 .. Key not programmed -- passed on to FS 70887 KEYDOWN: VK=46, Waiting=0, Repeat=Y, Shifts=1 70887 .. Key not programmed -- passed on to FS 70934 KEYDOWN: VK=46, Waiting=0, Repeat=Y, Shifts=1 70934 .. Key not programmed -- passed on to FS 70996 KEYDOWN: VK=46, Waiting=0, Repeat=Y, Shifts=1 70996 .. Key not programmed -- passed on to FS 71043 KEYDOWN: VK=46, Waiting=0, Repeat=Y, Shifts=1 71043 .. Key not programmed -- passed on to FS 71090 KEYDOWN: VK=46, Waiting=0, Repeat=Y, Shifts=1 71090 .. Key not programmed -- passed on to FS 71090 KEYUP: VK=46, Waiting=0 71449 KEYUP: VK=16, Waiting=0, Spurious so ignored! 82977 KEYDOWN: VK=27, Waiting=0, Repeat=N, Shifts=0 82977 .. Key not programmed -- passed on to FS 83149 Sim stopped: average frame rate for last 52 secs = 19.8 fps 95255 C:\Users\george\AppData\Roaming\Microsoft\FSX\Previous flight.FLT 305107 System time = 28/01/2013 11:46:10, Simulator time = 14:19:46 (19:19Z) 305107 *** FSUIPC log file being closed Average frame rate for running time of 53 secs = 19.7 fps G3D fix: Passes 12505, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 27 Allocs, 27 Freed ********* FSUIPC Log file closed ***********
  6. I have VRS tacpac, AIcarrier2, USS Nimitz & USS Eisenhower Version 2.0 by Javier Fernandez and FSrecorder. I also have TrackIR, I am also using a Lua file called Lua.panning that you suggested in a recent forum
  7. I have never done a log before, I hope this is what you need. Also updated to 4.859s a********* FSUIPC4, Version 4.859s by Pete Dowson ********* Running inside FSX on Windows 7 Module base=598F0000 User Name="George Fitzgerald" User Addr="gbfitzgerald@comcast.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 172 System time = 27/01/2013 15:49:10 172 FLT path = "C:\Users\george\Documents\Flight Simulator X Files\" 203 Trying to connect to SimConnect Acc/SP2 Oct07 ... 234 FS path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 578 LogOptions=00000000 00000001 578 SIM1 Frictions access gained 578 Wind smoothing fix is fully installed 578 G3D.DLL fix attempt installed ok 578 SimConnect_Open succeeded: waiting to check version okay 578 Trying to use SimConnect Acc/SP2 Oct07 2886 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 2886 Initialising SimConnect data requests now 2886 FSUIPC Menu entry added 2918 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 2918 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 20530 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\VRS_FA-18E\FA-18E-6.8_SE.AIR 20530 Weather Mode now = Theme 20530 c:\users\george\documents\flight simulator x files\vrs nantuck sound.FLT 30155 System time = 27/01/2013 15:49:40, Simulator time = 14:19:46 (19:19Z) 30187 Aircraft="Flight Test Aircraft E1" 75443 Starting everything now ... 91854 Advanced Weather Interface Enabled 212443 Sim stopped: average frame rate for last 124 secs = 19.8 fps 220742 C:\Users\george\AppData\Roaming\Microsoft\FSX\Previous flight.FLT 400517 LogOptions changed, now 40000000 00000001 404246 Button changed: bRef=0, Joy=0, Btn=2, Pressed 404246 [buttons.Flight Test Aircraft E1] 23=P0,2,K80,8 404246 SendKeyToFS(00000050=[P], KEYDOWN) ctr=0 404246 Sending WM_KEYDOWN, Key=80 (Scan code 25), Ctr=1 404293 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 404293 .. Key not programmed -- passed on to FS 404402 SendKeyToFS(00000050=[P], KEYUP) ctr=0 404402 Sending WM_KEYUP, Key=80 (Scan code 25), Ctr=1 404449 KEYUP: VK=80, Waiting=0 404495 Button changed: bRef=0, Joy=0, Btn=2, Released 404495 [buttons.Flight Test Aircraft E1] 23=P0,2,K80,8 407225 Button changed: bRef=0, Joy=0, Btn=0, Pressed 407225 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 407225 SendKeyToFS(0004002E=[shft+Del], KEYDOWN) ctr=0 407225 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 407241 Sending WM_KEYDOWN, Key=46 (Scan code 83), Ctr=1 407288 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 407288 .. Key not programmed -- passed on to FS 407288 KEYUP: VK=16, Waiting=0 407288 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=0 407288 .. Key not programmed -- passed on to FS 407335 SendKeyToFS(0004002E=[shft+Del], KEYUP) ctr=0 407335 Sending WM_KEYUP, Key=46 (Scan code 83), Ctr=2 407350 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 407381 KEYUP: VK=46, Waiting=0 407381 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 407381 .. Key not programmed -- passed on to FS 407381 KEYUP: VK=16, Waiting=0 407428 Button changed: bRef=0, Joy=0, Btn=0, Released 407428 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 412701 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 412701 .... Condition (+0,23) = FALSE 412701 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412748 FS Control Sent: Ctrl=66416, Param=180 412748 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412748 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412795 FS Control Sent: Ctrl=66416, Param=180 412795 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412810 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412857 FS Control Sent: Ctrl=66416, Param=180 412857 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412857 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412904 FS Control Sent: Ctrl=66416, Param=180 412904 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412904 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412951 FS Control Sent: Ctrl=66416, Param=180 412951 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412951 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 412997 FS Control Sent: Ctrl=66416, Param=180 413013 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413013 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413060 FS Control Sent: Ctrl=66416, Param=180 413060 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413060 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 413060 .... Condition (+0,23) = FALSE 413060 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413107 FS Control Sent: Ctrl=66416, Param=-1 413107 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413653 [buttons.Flight Test Aircraft E1] 46=CP(+0,23)0,32,K51,11 413653 .... Condition (+0,23) = FALSE 413715 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413762 FS Control Sent: Ctrl=66416, Param=0 413762 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413762 [buttons.Flight Test Aircraft E1] 46=CP(+0,23)0,32,K51,11 413762 .... Condition (+0,23) = FALSE 413762 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413809 FS Control Sent: Ctrl=66416, Param=0 413809 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413809 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 413855 FS Control Sent: Ctrl=66416, Param=-1 413855 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 415821 Button changed: bRef=0, Joy=0, Btn=16, Pressed 415821 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 415821 SendKeyToFS(00020027=[ctl+Right], KEYDOWN) ctr=0 415821 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=2 415837 Sending WM_KEYDOWN, Key=39 (Scan code 77), Ctr=1 415868 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 415868 .. Key not programmed -- passed on to FS 415868 KEYDOWN: VK=39, Waiting=0, Repeat=N, Shifts=2 415868 .. Key not programmed -- passed on to FS 415962 SendKeyToFS(00020027=[ctl+Right], KEYUP) ctr=0 415962 Button changed: bRef=0, Joy=0, Btn=16, Released 415962 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 415977 Sending WM_KEYUP, Key=39 (Scan code 77), Ctr=2 415993 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=1 416024 KEYUP: VK=39, Waiting=0 416024 KEYUP: VK=17, Waiting=0 416367 Button changed: bRef=0, Joy=0, Btn=16, Pressed 416367 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 416367 SendKeyToFS(00020027=[ctl+Right], KEYDOWN) ctr=0 416367 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=2 416383 Sending WM_KEYDOWN, Key=39 (Scan code 77), Ctr=1 416414 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 416414 .. Key not programmed -- passed on to FS 416414 KEYDOWN: VK=39, Waiting=0, Repeat=N, Shifts=2 416414 .. Key not programmed -- passed on to FS 416476 SendKeyToFS(00020027=[ctl+Right], KEYUP) ctr=0 416476 Sending WM_KEYUP, Key=39 (Scan code 77), Ctr=2 416492 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=1 416523 Button changed: bRef=0, Joy=0, Btn=16, Released 416523 [buttons.Flight Test Aircraft E1] 40=P0,16,K39,10 416523 KEYUP: VK=39, Waiting=0 416523 KEYUP: VK=17, Waiting=0 420735 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 420735 .... Condition (+0,23) = FALSE 420735 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420798 FS Control Sent: Ctrl=66416, Param=180 420798 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420798 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420844 FS Control Sent: Ctrl=66416, Param=180 420844 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420844 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420891 FS Control Sent: Ctrl=66416, Param=180 420891 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420891 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420938 FS Control Sent: Ctrl=66416, Param=180 420938 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420938 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 420938 .... Condition (+0,23) = FALSE 420938 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 420985 FS Control Sent: Ctrl=66416, Param=-1 420985 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424011 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 424011 .... Condition (+0,23) = TRUE 424011 SendKeyToFS(00060031=[ctl+shft+1], KEYDOWN) ctr=0 424011 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424011 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424011 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=3 424011 Sending WM_KEYDOWN, Key=17 (Control) (Scan code 29), Ctr=3 424027 Sending WM_KEYDOWN, Key=49 (Scan code 2), Ctr=1 424058 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 424058 .. Key not programmed -- passed on to FS 424058 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=3 424058 .. Key not programmed -- passed on to FS 424058 KEYDOWN: VK=49, Waiting=0, Repeat=N, Shifts=3 424058 .. Key not programmed -- passed on to FS 424058 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424058 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424105 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424105 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424152 SendKeyToFS(00060031=[ctl+shft+1], KEYUP) ctr=0 424152 [buttons.Flight Test Aircraft E1] 48=CP(+0,23)0,36,K49,11 424152 .... Condition (+0,23) = TRUE 424152 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424152 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424152 Sending WM_KEYUP, Key=49 (Scan code 2), Ctr=3 424167 Sending WM_KEYUP, Key=17 (Control) (Scan code 29), Ctr=2 424167 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=2 424214 KEYUP: VK=49, Waiting=0 424214 KEYUP: VK=17, Waiting=0 424214 KEYUP: VK=16, Waiting=0 424214 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 424214 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\panning.lua" 431842 Button changed: bRef=0, Joy=0, Btn=26, Pressed 431842 [buttons.Flight Test Aircraft E1] 42=P0,26,K46,9 431842 SendKeyToFS(0004002E=[shft+Del], KEYDOWN) ctr=0 431842 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 431858 Sending WM_KEYDOWN, Key=46 (Scan code 83), Ctr=1 431889 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 431889 .. Key not programmed -- passed on to FS 431889 KEYUP: VK=16, Waiting=0 431889 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=0 431889 .. Key not programmed -- passed on to FS 431998 SendKeyToFS(0004002E=[shft+Del], KEYUP) ctr=0 431998 Sending WM_KEYUP, Key=46 (Scan code 83), Ctr=2 432014 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 432045 KEYUP: VK=46, Waiting=0 432045 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 432045 .. Key not programmed -- passed on to FS 432045 KEYUP: VK=16, Waiting=0 432186 Button changed: bRef=0, Joy=0, Btn=26, Released 432186 [buttons.Flight Test Aircraft E1] 42=P0,26,K46,9 436210 Button changed: bRef=0, Joy=0, Btn=0, Pressed 436210 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 436210 SendKeyToFS(0004002E=[shft+Del], KEYDOWN) ctr=0 436210 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 436226 Sending WM_KEYDOWN, Key=46 (Scan code 83), Ctr=1 436257 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 436257 .. Key not programmed -- passed on to FS 436257 KEYUP: VK=16, Waiting=0 436257 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=0 436257 .. Key not programmed -- passed on to FS 436351 SendKeyToFS(0004002E=[shft+Del], KEYUP) ctr=0 436366 Sending WM_KEYUP, Key=46 (Scan code 83), Ctr=2 436382 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 436413 KEYUP: VK=46, Waiting=0 436413 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 436413 .. Key not programmed -- passed on to FS 436413 KEYUP: VK=16, Waiting=0 436803 Button changed: bRef=0, Joy=0, Btn=0, Released 436803 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 437505 Button changed: bRef=0, Joy=0, Btn=0, Pressed 437505 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 437505 SendKeyToFS(0004002E=[shft+Del], KEYDOWN) ctr=0 437521 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 437536 Sending WM_KEYDOWN, Key=46 (Scan code 83), Ctr=1 437568 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 437568 .. Key not programmed -- passed on to FS 437568 KEYUP: VK=16, Waiting=0 437568 KEYDOWN: VK=46, Waiting=0, Repeat=N, Shifts=0 437568 .. Key not programmed -- passed on to FS 437614 SendKeyToFS(0004002E=[shft+Del], KEYUP) ctr=0 437614 Sending WM_KEYUP, Key=46 (Scan code 83), Ctr=2 437630 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 437661 KEYUP: VK=46, Waiting=0 437661 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 437661 .. Key not programmed -- passed on to FS 437661 KEYUP: VK=16, Waiting=0 437817 Button changed: bRef=0, Joy=0, Btn=0, Released 437817 [buttons.Flight Test Aircraft E1] 55=P0,0,K46,9 443184 KEYDOWN: VK=27, Waiting=0, Repeat=N, Shifts=0 443199 .. Key not programmed -- passed on to FS 443386 Sim stopped: average frame rate for last 42 secs = 19.9 fps
  8. I have fsuipc 4.85, FSX and a saitek 52 joystick I have also notice a problem with the shift + delete combination. Below is my button programming, entry numbers 42 (a button type switch) and 55 ( a paddle type switch) have the shift/delete combo, i.e. K46, 9. However, when I use either only a delete command is sent/received. 27=P0,1,C66244,0 28=P0,6,K82,10 29=P0,7,K90,8 30=P0,9,K189,8 31=P0,8,K187,8 32=P0,10,K8,8 33=P0,11,K32,10 34=R0,22,K37,8 35=R0,21,K38,8 36=R0,20,K39,8 37=R0,19,K40,8 38=P0,18,K37,10 39=P0,15,K38,10 40=P0,16,K39,10 41=P0,17,K40,10 42=P0,26,K46,9 43=P0,28,K191,8 44=P0,27,K85,10 45=P0,31,K13,8 46=CP(+0,23)0,32,K51,11 47=CP(+0,23)0,34,K52,11 48=CP(+0,23)0,36,K49,11 49=CP(+0,23)0,38,K50,11 50=P0,12,K117,8 51=P0,13,K118,8 52=W0366=1 R0,5,K190,8 53=W0366=1 U0,5,K190,8 54=P0,4,K120,8 55=P0,0,K46,9
  9. thanks Pete that works great, and I really don't notice any difference in smoothness. One thing to mention, for anyone who might be interested in this procedure, be sure to remove the hat switch assignment in the FSX control. I might also add that I am enjoying learning to program in FSUIPC and now LUA, thanks.
  10. i have fsuipc 4.85, FSX and a saitek 52 joystick. The hat switch is assigned to View panning in the FSX control setting. I was wondering if it is possible to make the panning function conditional (upon another button being pressed) using fsuipc. I don't know if this helps, but when I look under axis assignment in the fsuipc options and settings, this hat switch is assigned to the P axis.
  11. i have used pete's code for assigning the slider on my saitek 52 for zooming. However, I am getting too much zooming. How would I limit the zoom to say 5x down to 0.25x? Perhaps, someone could explain exactly what each of the aspects or elements of the axis code refers to.
  12. I want to put my registered copy of FSUIPC onto a new computer. As I understand, I must go to the internet site where I purchased the program, download it on my new computer and use the key code when installing FSUIPC onto my new computer. Correct? I would also like to know what is the best way to get the setting (buttons&switches) on my old computer to the new computer. Do I just email my FSUIPC4.ini file on the old computer to myself and put it into the Modules folder on my new computer. Is there anything else I would need to do?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.