Jump to content
The simFlight Network Forums

Volker Heine

Members
  • Posts

    4,046
  • Joined

  • Last visited

  • Days Won

    30

Everything posted by Volker Heine

  1. Hello Lee, please read here: https://forum.simflight.com/topic/84291-important-wichtig-reference-databasemanager-ver-97x-lm-prepar3d-v4x/ Regards, Volker
  2. Hello Frans, I don't know your problem and I can't help you. However: on your screenshot you can see, not very clearly, there exists taxiways and parking positions. Try another Color Theme. (see Options / Colors) Volker
  3. Hello, And now? How should I help you with "your" problem? The FSCommander does not draw "gray squares" for airports. You have written so little information, that's impossible for me, to have an answer or a solution to "your" problem. How about a precise description of "your" problem? Does it concern for example all airports or what else??? A screenshot would be very helpful too !!! Volker
  4. Hello Gil, You have certainly downloaded the demo version from our website. If yes, then that would be the explanation for your problem. The demo version from our website and the full version of Aerosoft differ in installation and certification. Regards, Volker
  5. Hello Gil, please read this website: http://www.fscommander.com/aboutus.htm Did you read the installation instructions? Vista and Windows 7_8_10 users please readbefore install FSC10.pdf. ( see below attached document ) Has the FlightSim Commander been installed as administrator? Is the DataBase Manager running as an administrator? I can not verify your duplicate information problems when using IVAO. Please make sure that the installation and execution of the FlightSim Commander has been performed as described in the attached document. If so, fly as a minimum 30 minutes while connected to IVAO. Then send me the complete subfolder /SUPPORT to my e-mail address. The address can be found here: www.fscommander.com Regards, Volker Vista and Windows 7_8_10 users please readbefore install FSC10.pdf
  6. Hello Lee, The Database Manager can only read the Ils'es that are entered in the corresponding Airport file. Did you let the Database Manager run again afterwards? The Navigraph Cycle has no influence on the ILS'es in the FSC. In the manual you will find the following note: Note that FlightSim Commander uses data which are partly extracted directly from Flight Simulator files and partly from real-world databases. The data read from Flight Simulator directly are: ICAO Codes, Airports, Runways, ILS'es, Markers, Taxiways, Parking positions and Aprons. All other data are provided by Navigraph and Aerosoft and concern VORs, NDBs, Intersections, GPS fixes, Airways, SIDs, STARs and Transitions. Regards, Volker
  7. Hello Marc, Prepar3D V4.x is no longer supported by FlightSim Commander. Information also here: https://forum.simflight.com/topic/84291-important-wichtig-reference-databasemanager-ver-97x-lm-prepar3d-v4x/ Regards, Volker
  8. Hello! An attempt would be worth checking the color setting under Options - Colors - Various Color - GPS Window. Another recommendation would be, to read this post: https://forum.simflight.com/topic/60271-important-everyone-please-read/ Volker
  9. Hello Ken, please read here: https://forum.simflight.com/topic/84291-important-wichtig-reference-databasemanager-ver-97x-lm-prepar3d-v4x/ Regards, Volker
  10. Bonjour Daniel, Malheureusement, nous ne pouvons pas vous aider. Nous sommes les développeurs de FlightSim Commander. En raison de votre FSUIPC, essayez de décrire votre problème sur le forum FSUIPC. https://forum.simflight.com/forum/30-fsuipc-support-pete-dowson-modules/ Volker
  11. Bonjour Daniel, Mauvais forum. Voir ici: https://forum.simflight.com/forum/30-fsuipc-support-pete-dowson-modules/ Volker
  12. Hello Frans, As I wrote it ... nothing has changed. Maybe the settings in cyberspace have been lost. Wish also peaceful X-Mas and a happy new year. Volker
  13. Hallo Andreas, sende bitte einen Screenshot an meine e-mail Adresse. Die Adresse findest Du hier: www.fscommander.com Übrigens, mein Screenshot hat 67 Kb. Gruss Volker P.S. Wenn Du nichts geändert hast, dann hilft bei Deinem Problem auch kein Update. Trotzdem steht natürlich ein Update bereit. Das beseitigt aber nicht Dein Problem. Das sollten wir zuerst lösen. Hier kannst Du Informationen über ein Update nachlesen: https://forum.simflight.com/topic/85148-flightsim-commander-and-et-und-vatsim-part-2-update/
  14. Hallo Andreas, unabhängig davon das Du leider nicht schreibst, welche Version / Build des FlightSim Commander Du verwendest, veröffentliche bitte in Deiner nächsten Antwort einen Screenshot der möglichst dem von mir beigefügten Screenshot entspricht. Besten Dank, Volker
  15. Ich gehe davon aus das nicht beide Airports zur gleichen Zeit installiert sind. 1. Aerosoft Hamburg pro v1.1.0.0 installieren und DataBase Manager erneut laufen lassen. Überprüfen ob das Problem noch existiert. Ja/Nein? Anschliessend deinstallieren 2. Justsim - Hamburg Airport - Helmut Schmidt - EDDH installieren und DataBase Manager erneut laufen lassen. Überprüfen ob das Problem noch existiert. Ja/Nein? Anschliessend den kompletten Ordner /SUPPORT als ZIP-Datei an meine e-mail Adresse senden. Die Adresse gibt es hier: www.fscommander.com Volker
  16. Hallo "EuFi" ... bitte im Handbuch nachlesen: Kapitel 2, Datenbank Manager, Absatz... Beachten Sie, dass der FlightSim Commander Daten verwendet... Welche AddOn Szenerie für Hamburg wird verwendet? Wenn nur die Standard Szenerie für Hamburg vewendet wird, dann sind die Daten älter als 12 Jahre. ... please read the manual:Chapter 2, Database Manager, Paragraph ... Note that the FlightSim Commander uses data ... Which AddOn scenery for Hamburg is used? If only the default scenery for Hamburg is used, then the data is older than 12 years. Gruss Volker
  17. Hi ???, The wind at the airport is static and measured by the NOAA weather stations on the ground. The wind displayed in the compass is ambient and is updated by the simulator and optionally depending on the weather machine used. Volker
  18. Hello Yves, If you read the manual (available in 4 languages), you will find in Chapter 5 all the information about flight planning and using the Flight plan panel. Paragraph 5.5 informs about "flight plans from external sources". Regards, Volker
  19. Hello Alaa Riad, FlightSim Commander version 10 is not P3D compatible. Please read here: https://forum.simflight.com/topic/84902-flightsim-commander-10-has-been-released-le-fsc-10-%C3%A1-%C3%A9t%C3%A9-publi%C3%A9-der-fsc-10-wurde-ver%C3%B6ffentlicht/ Your FlightSim Commander version 9.21 is not compatible with P3D ... but ... Please read here: https://forum.simflight.com/topic/85148-flightsim-commander-and-et-und-vatsim-part-2-update/ Regards, Volker
  20. Hello Lee, Was the reinstallation performed as an administrator? Was the FlightSim Commander then started with administrator rights? As developers we do not have access to your registration data. In order to investigate your problem, please send a copy of your SimMarket Sales Information to our e-mail address. You can find the address here: www.fscommander.com Regards, Volker
  21. The downloaded file FSC975.zip contains a complete, new installation. In this case, all previous updates are included. Changes of all versions are documented. Revisions are not documented. Using this installation requires uninstalling the old version. We strongly recommend creating a backup of the complete folder of the FlightSim Commander. Regardless of this, it's absolutely necessary to save the following files externally. \ register.fsc \ fsccolor.ini \ fsc.ini \ User \ Blackbox \ User \ Logbook.fsc \ User \ aircraft.fsc \ User \ BuddyIvao.fsc \ User \ BuddyVatsim.fsc \ Flightplan \ FSC \ Database \ UserWP.txt \ Database \ UserObj.txt These files must be copied back to their original location before restarting your FlightSim Commander. Regards, Volker btw. This information is only valid for users of a SimMarket version
  22. Hello Tommy, The theme is as old as Windows and FligfhtSim Commander. Short answer: NO! Workaround ... disable Move the map instead of the aircraft and ... set a high value for Refresh the map (seconds) example 600 or 900 seconds. The chances are getting smaller that the event Focus occurs Regards, Volker btw. Hint: Keep the FSC always up to date. The current version is 9.7.5.
  23. Hallo Rainer, dann kontaktiere mich bitte per e-mail. Gruss Volker
  24. Hi, Activate under Options -> Display -> Focus back to Flight Simulator Volker
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.