sehadi

Hi I have tried myself before the post but I was looking for fenix control list and could not find that anyways but after your post I have tried with presets and rotaries started working but not 100% as I have tried 2 different settings and obviously results are different. As you can see what i have done and pls see if you can help! So far I tried with Altitude and heading only This one did recognise in the flight but hardly any increment or decrement even some time after restarting sim it doesn't work at ALL 1st) 55=CP(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 56=CU(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 57=CP(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 58=CU(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 59=CP(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 60=CU(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 61=CP(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 62=CU(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- the 2nd one works well but unpredictable speed most of the time very fast but don't know what else I have to do. guidance will be appreciated 2nd) 55=CP(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 56=CP(+B,20)64,1,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 57=CU(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 58=CU(+B,20)64,1,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 59=CP(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 60=CP(+B,20)64,2,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 61=CU(+B,20)64,0,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 62=CU(+B,20)64,2,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 63=CP(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 64=CP(+B,18)64,1,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 65=CU(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 66=CU(+B,18)64,1,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 67=CP(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 68=CP(+B,18)64,1,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 69=CU(+B,18)64,0,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- FSUIPC7.ini

Thank you for your help and support and sorry that I did not checked page 48 but anyway I managed to map the presets to my bravo autopilot buttons and all going well with the fenix a320 however I don't know how to use both rotaries (incr, decr) and (ias, vs, head etc) I managed to use your rotary lua file and commands in ini file for FBW-A320 but its not working with fenix A320. I appreciate if you can guide me setting up both rotaries Thank you AA

I understand that to acces presets i have to put file in fsuipc modules in community folder. is this text file going there as my understaing is that should be with mcro file or something like that.

I did check wasm in the advanced user guide and enable in fsuipc but where to put Mf PRESET FILE(TXT FILE) AND HOW TO ACCESS IN THE WASM MODULE IN FSUIPC MENU. you can find the file attached with this post with the actual name. I have downloaded from Hubhop events.txt

thank you i have already starte new topic i ll continue with that

Hi jhon, i appreciate you helped me in the past with the key binding with fbw a320 now i need help with fenix A320 with bravo autopilot. i was reading other topic but not much info how to map presets from mobiflight is ther any chance a event file can be created just like fbw or if you tell me how to create and whats the format/syntax then i can probably try to do this (obviously with your help. I have also downloaded text file with all presets in there but dont know how to use them however i am familier with event file as i did this in fbw. can you help thank you

Thanks for reply. I am reading this topic altogether and I tried Hubhop as well infect downloaded mobiflight software as well as connector and text file including all the lvars in there but i dont know how to go further i saw videos but tbh i don't understand much where to start and what to do next.

Hi is it possible if you can share file of Fenix A320 Presets that you have as I am struggling with my Honeycomb bravo autopilot mappings as well as if you have something that bravo rotaries can work as well thank you Sehadi

Thank you for your help!

Thanks for the prompt reply! last night I tried by putting * after my post and it works flawlessly however I ll change the profile name to be able to work with all liveries I have another post in different section about rotaries not working properly if you kindly respond to that. I really appreciate thank you A AKRAM

Hi if you please help me on the rotaries issue. I have done every thing according to this post and added lotaries.lua file in main folder . rotaries are working but with problems and those are given below Altitude: rotating speed ok but counterclock wise Heading: very slow rotating speed and takes ages to get from lets say 300 to 340 but direction is clockwise Speed: very very slow rotating speed and counter clock wise. AND SAME WITH VS Pls help me where i am wrong and pls find the ini as well as log files with this post thank you A Akram FSUIPC7.ini FSUIPC7.log

Sorry to bother you again and after long delay if you please help me in setting up throttles as they move against the physical once ( Honeycomb bravo throttles for FBW A32NX (development version)) I tried to add scale number as you advised but I think I could not understand property what you said as well as I tried to read page 40 and 41 but these things are probably little technical for me, however I put -1 at the end of the line .Please check the ini file and see if you can help me on this issue. thank you A Akram FSUIPC7.ini

Hi I have the same issue with A32NX FBW MOD axis mapping in the FSUIPC7 however I managed to setup them by use the option "send to Fs as normal axis" and they worked fine but movement is in opposite way i-e when physical throttles are on idle position the engines are on toga in sim and when physical throttles are on toga engines in sim are idle and no REV option is available on axis assignments page and if I go in joystick calibration page it doesn't work as this option only works when I choose first option "Send direct to Fsuipc calibration" any help will be appreciated. thank you

FSX with ACCEL PAck intel i7 extreme 965 3.2ghz 8gb ram gforce 9800gtx+oc I have fsuipc 9.929 and some time when I load the aircraft controls of aircraft does not work when I go in the fsuipc module the profile box in the axis assignments was unchecked and if check the box the new list comes up with the names of different profiles I already created and when I select the aircraft profile it uncheck the box again even i tried pressing Reload all assignments but doesn't work . I tried restarting PC and game as well but does not work Pls note as this problem not happen every time but some times e-g 1 in 10 time and very annoying pls help thx AA