Jump to content
The simFlight Network Forums

KSAN_Chuck

Members
  • Content Count

    12
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by KSAN_Chuck

  1. Matty, I flew the following approaches-- KPDX -- ILS 28L -- Not an actual CAT II or CAT III approach. I disconnected the autopilot at about 80 feet and landed smoothly (-165 feet/min as reported on SmartCARS). This is a typical landing rate for me when hand-flying the aircraft to touchdown. KGEG -- ILS 21 -- Flew the published CAT II/CAT III approach. Visibility was very bad, and there was a lot of turbulence, which I thought may have been a factor in the poor landing. I let the autopilot fly to touchdown and rollout (-605 feet/min). KSTL -- ILS 12L -- Flew the pub
  2. I've flown the V3 SP2 E-175 for 6 flights, and I really like it. Most of the issues that I listed in my earlier posts have been addressed, and now this aircraft is fun to fly. I am flying on P3D V4.5, and I still have some issues, but they are minor. Here they are: 1. The TOGA click spot is not there in my world. I can use control + shift + G; not a big problem. 2. The autobrake control did not work, then it did work, then it didn't. Then I installed a Feel There livery and it works again. Go figure. I know the work-around for this issue as well. 3. When I fly a
  3. After looking at this a bit closer, it seems I kept the download link for E-Jets V2 but lost the link for V3 (a different order). The file I was trying to install was ejetsv2-p3dv4-3 sp2. This looks like a V2 installer to me. So I need the link that will allow me to download V3 SP2. My V3 order ID is *. If I need to submit a trouble ticket on this, please let me know. Thanks Chuck Adams -- * Edit: order # removed. Posting order details on a pink forum means you have shared your purchase with every thief on the Internet. - Mods.
  4. Is there some trick I am missing when I try to install the E175 V3 SP2? I was using the E175 V2 with absolutely no issues, and months ago I had completely (I thought) removed the E175 V3 SP1 package (you can see my earlier post as to why). First I installed the V3 SP2 package, thinking that if the V3 SP1 package was required, the install would be halted. The install went as expected, but when I tried to select an E175 as my vehicle, it was clearly a V2 aircraft. In my startup menu under Feel There the only listing was E-Jets V2. So then I un-installed the V2 package (no V3 lis
  5. The other day I downloaded and installed the E-Jets V3 for P3D V4.5. Here are some of the issues I had: 1. I was not able to use the configuration tool to program a joystick button by double-clicking the function (engage TOGA in this case) and then pressing the desired button (NOT while running P3D). I did do this using Options/Controls inside P3D. Actually, this has never worked as I supposed it should in any of the FeelThere products I have owned. 2. The non-functional wiper control knobs are another minor annoyance, and once airborne (or sometime later in a flight) they t
  6. I un-installed the ERJ using IObit Uninstaller. I then deleted the ERJ directory out of Sim Objects/Airplanes, and I deleted the Feel There directory out of the Prepared3D v4 directory. I then loaded a scenario containing a default aircraft (Mooney M20), then selected the ERJ. Unfortunately, I got the same results--no request to approve the ERJ's gauge files, and I am not able to do anything except select items off the ERJ's menu bar (Thrust, Overhead, etc. ). So I am stumped. I slick my SSD every 6-12 months, and when I reinstall I will look for the latest P3D V4 update (which I a
  7. Ariel: I do believe I am using the ERJ for P3Dv4--as noted in my initial post I am using FeelThere ERJ-145LR for Prepared 3D v4.1.... (Product Version 2.0.0.31). However, I am not using the latest version of P3D v4--I am currently running on P3D version 4.1.7.22841. scoobflight: No, the sim did not ask me to approve the ERJ's guage files. Not after the first install, or after I de-installed and re-installed. Hmmm.....not sure how to fix that, but yes, I usually get some sort of approval question after installing a new aircraft. FYI, the only other non-default software running in
  8. I just purchased the ERJ for P3Dv4. I loaded and activated it, but on first glance the HUD was not visible (I tried the "H" option and pushing the W-key to cycle through the views in the 2-D cockpit). Then I uninstalled and reinstalled, but got the same results. I started P3D with a default aircraft (Mooney) scenario, then loaded the ERJ. It was cold and dark, as expected. Then I thought I'd just start it up and perhaps, with power, the HUD would appear. To my surprise I am unable to make anything except the menu bar (thrust, throttle quadrant, overhead, FMS, etc.) respond to my mo
  9. Thanks for the prompt reply.
  10. I have a question about the FeelThere TBM850--does it have a 2-D cockpit? If not, does it have some sort of HUD like the very excellent ERJ V2 or E-jets V2 that I enjoy so much? What I am looking for is a high-performance GA aircraft with (1) a 2-D cockpit (because I hate scrolling all over the place just to flip a switch), and (2) good forward visibility, even when the nosed is pitched up during takeoff. Thanks P.S. I did read the forum rules, but I can't figure out if this is an approved topic, or if it should have been posted in the "Other" forum.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.