Tommy_

Thank you very much Paul!!! Your describtion was great! - No Problems to follow and it works from the spot. Tommy

Sorry for that. @Paul: Thanks! It was so obviously that I overlooked it. But it won't work anyway (odd time displacement). Would you be so kindly to follow me to this part of the forum... -> http://forum.simflight.com/topic/79341-help-needed-to-create-keystroke-commands-in-wideclient/ ...to help me again creating the keystroke commands? That would be great! Thanks Tommy

-> Just a (modified) copy of my first post in the wrong part(user contributions) of the forum.<- Hello everyboby, I think I skiped something in the wideFS manual. My setup: I'm only using the DODO Sim Jet Ranger for FXS FSX:Steam (Server PC), Fsuipc (latest version) on the server pc, wideFs (latest Version) on the client pc The communication between server and client pc runs perfect. Applications on my client pc: checked: Simkits CCU2 (only runs under 32Bit) - works under wideFS Sinkits usb controller - works under wideFS unchecked (under wideFS): Ruscool Radio controller software Ruscool 64 input controller software Ruscool annunciator controller software Start up procedure: 1. [Client pc] - run wideclient 2. [Client pc] - wideclient starts(run1) the SimKits CCU2 controller software (neccessary: Self-calibration of the gauges) 3. [server pc] - run FSX:ST [and load a flight] - (manually) 4. [server pc] - run the dodsim hardware utilities software - (manually) 5. [Client pc] - wideclient should start the SimKitsUSB127 Software(Controls the USB gauges) after pressing Key "1" 6. [Client pc] - wideclient should start the Ruscool radio controller software after pressing Key "2" 7. [Client pc] - wideclient should start the Ruscool 64inputcontroller software after pressing Key "3" 8. [Client pc] - wideclient should start the Ruscool annunciator software after pressng Key "4" 9. All gauges ready to run (hopefully) My problem: I'm not able to write the necessary commands into the wideclient config to use the keystroke(see above) commands... I left a space between the different run-commands to put the keystroke-commands in between... ; ----------------------------------------------- [user] Run1=C:\Program Files\TRC Development\The Real Cockpit\TRCLink.exe RunReady2=C:\Program Files\SimkitsUSB\USBFSUIPCLink.exe RunReady3=C:\Program Files\Ruscool Electronics Ltd\Radio Displays\Radio Displays.exe RunReady4=C:\Program Files\Ruscool Electronics Ltd\64 Inputs and Encoders\64 Inputs and Encoders RunReady5=C:\Program Files\Ruscool Electronics Ltd\Bell 206 Annunciators\Bell 206 Annunciators.exe Log=Errors+ ; =============================================== It would be grate if somebody may willing to help me out of my mess. The best may be to get a script of what to write into the user section. Many thanks in advance Tommy Link to my Bell Jet Ranger cockpit project at hovercontrol: http://www.hovercont...ST;f=43;t=14233

Hello everyboby, I think I sikped something in the wideFS manual. My setup: I'm only using the DODO Sim Jet Ranger for FXS FSX:Steam (Server PC), Fsuipc (latest version) on the server pc, wideFs (latest Version) on the client pc The communication between server and client pc runs perfect. Applications on my client pc: checked: Simkits CCU2 (only runs under 32Bit) - works under wideFS Sinkits usb controller - works under wideFS unchecked (under wideFS): Ruscool Radio controller software Ruscool 64 input controller software Ruscool annunciator controller software Start up procedure: 1. [Client pc] - run wideclient 2. [Client pc] - wideclient starts(runready) the SimKits CCU2 controller software (neccessary: Self-calibration of the gauges) 3. [server pc] - run FSX:ST [and load a flight] - (manually) 4. [server pc] - run the dodsim hardware utilities software - (manually) 5. [Client pc] - wideclient should start the SimKitsUSB127 Software(Controls the USB gauges) after pressing Key "1" 6. [Client pc] - wideclient should start the Ruscool radio controller software after pressing Key "2" 7. [Client pc] - wideclient should start the Ruscool 64inputcontroller software after pressing Key "3" 8. [Client pc] - wideclient should start the Ruscool annunciator software after pressng Key "4" 9. Happy flying (hopefully) My problem: I'm not able to write the necessary commands into the wideclient config to use the key pressing commands... All applications start at the same time. That causes problems. They should be started time-displaced - OR BETTER - By the announced Key commands. Here s what I put in so far, but even the delay don't work. ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] ServerName=Steam-PC Protocol=TCP ServerAddr=192.168.1.1 Port=8002 Window=1,392,800,109 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ; ----------------------------------------------- [user] Run1=C:\Program Files\TRC Development\The Real Cockpit\TRCLink.exe Delay1=60 RunReady2=C:\Program Files\SimkitsUSB\USBFSUIPCLink.exe DelayReady=30 RunReady3=C:\Program Files\Ruscool Electronics Ltd\Radio Displays\Radio Displays.exe DelayRead3=60 RunReady4=C:\Program Files\Ruscool Electronics Ltd\64 Inputs and Encoders\64 Inputs and Encoders DelaReady=30 RunReady5=C:\Program Files\Ruscool Electronics Ltd\Bell 206 Annunciators\Bell 206 Annunciators.exe Log=Errors+ ; =============================================== [sounds] Path=C:\WideClient\Sound\ Device1=Primärer Soundtreiber Device2=Digitales Ausgabegerät (SPDIF) (High Definition Audio-Gerät) It would be grate if somebody may willing to help me out of my mess. The best were to get a script of what to write into the user section. Many thanks in advance! Tommy Link to my Project at hovercontrol: http://www.hovercontrol.com/cgi-bin/ib3/ikonboard.cgi?s=d83cbc0450be6ce47ac48a1fd5ed0921;act=ST;f=43;t=14233

Hi Pete, thank you for the hint concerning the "migration" of my mappings from the old to the new PC!! I'll give it try asap. Tommy

Hello, I'm very new in this forum and glad to get some great information about how to install FSUIPC into FSX:SE. Now my question: Is it possible to "copy and paste" the informations about the button/switches and controlls mapping of FSUIPC from my "old" sim pc to the new one? It would save my a lot of work if it would be possible :mrgreen: I'm using the latest k Version of the FSUIPC4 on my new pc I'm flying the DODOSIM 206 Jet Ranger Many thanks in advance for your Help! Tommy Additional information: Here's a link to my (built from the scratch) Bell JetRanger Cockpit at theHovercontrol Forum http://www.hovercontrol.com/cgi-bin/ib3/ikonboard.cgi?s=88c9fffa860b60ebc44e528c9f51fcb1;act=ST;f=43;t=14233