dazzan Posted May 1, 2005 Report Share Posted May 1, 2005 Hi Pete Since I have copied the new FSUIPC 3.48 version over an older FSUIPC version the following axis on the copilot side do no longer work. aileronB=66422 (Mixture1 in FS2004) elevatorB=66425 (Mixture2 in FS2004) rudderB=66428 (Mixture3 in FS2004) I did not change the FSUIPC.ini file at all. Everything is there as before. Even when I try to calibrate the pilot joystick axes via FSUIPC 3.48, there is absolutely no change in the calibration values (even after pushing "set"). What can I do? Thanks Pete Link to comment Share on other sites More sharing options...
Pete Dowson Posted May 1, 2005 Report Share Posted May 1, 2005 Since I have copied the new FSUIPC 3.48 version over an older FSUIPC version the following axis on the copilot side do no longer work. aileronB=66422 (Mixture1 in FS2004) elevatorB=66425 (Mixture2 in FS2004) rudderB=66428 (Mixture3 in FS2004) I did not change the FSUIPC.ini file at all. Everything is there as before. Even when I try to calibrate the pilot joystick axes via FSUIPC 3.48, there is absolutely no change in the calibration values (even after pushing "set"). What can I do? Hmmm. I've not made any changes recently to anything that might affect that. Can you tell me the version number of the last version you used with this working, please? I may have inadvertently messed it up, but I need to know when it may have been to narrow it down. Please attach your FSUIPC.INI file too (in text form if you like Thanks Pete Link to comment Share on other sites More sharing options...
dazzan Posted May 2, 2005 Author Report Share Posted May 2, 2005 Hi Pete, The only version of FSUIPC I found back was version 3.4.1.1 Everything was OK there for: aileronB=66422 elevatorB=66425 rudderB=66428 I noticed also that fsuipc 3.48 takes the same axis for reverser 1 to 3. I changed the values to 0, but the B axis were still not working. Thanks Link to comment Share on other sites More sharing options...
Pete Dowson Posted May 2, 2005 Report Share Posted May 2, 2005 The only version of FSUIPC I found back was version 3.4.1.1 Everything was OK there for: aileronB=66422 elevatorB=66425 rudderB=66428 There's been a lot of changes since 3.411. This may take some finding. Leave it with me for now -- I'll get back to you if I need more information. I noticed also that fsuipc 3.48 takes the same axis for reverser 1 to 3.I changed the values to 0, but the B axis were still not working. The separate reverser assignments are not relevant unless you go to the last page and set them. Regards, Pete Link to comment Share on other sites More sharing options...
dazzan Posted May 5, 2005 Author Report Share Posted May 5, 2005 Hi Pete Version 3.45 did already not work Link to comment Share on other sites More sharing options...
Pete Dowson Posted May 5, 2005 Report Share Posted May 5, 2005 Version 3.45 did already not work Well, that narrows the change in which the error occurred a little. Thanks. I should get to it next week. Sorry about the delay. Pete Link to comment Share on other sites More sharing options...
Pete Dowson Posted May 9, 2005 Report Share Posted May 9, 2005 I think I found a bug which could have made these co-pilot controls not work. I haven't time to test the fix here till later this week, and it will take a bit of setting up to get the extra inputs, so I wondered if you would like to try it with your configuration and let me know, please. The fix is in the attached test version 3.481. Regards, Pete FSUIPC3481test.zip Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now