jonwoody Posted October 7, 2006 Report Posted October 7, 2006 Hi, I have a reg copy of FSUIPC current version. I have a CH yoke (3 levers) and CH rudder pedals. I have diabled joystick controls in FS9 and FSUIPC handles them all. I have allocated all buttons and switches, rudders, elevators, flaps etc with no problems. Everything EXCEPT throttles are allocated under General aircraft commands. I load the PMDG 737 and allocate a lever each for eng 1 and eng 2 ("throttle1" and "Throttle2" respectively) then calibrate them. All done under "specific aircraft commands" is checked. All that is fine and works great. Then I load the PMDG744; Again, all the general commands work fine, spoiler included. I then select "specific a/c command" box to allocate my two levers left over to control engines. I allocate lever one - "throttle1" and "throttle4", the other as "throttle2" and "throttle3". Once done, she flies fine. Now, If I load the 737 again, my throttles are out of calibration???? Why is this so? Below is my ini file re the joystick calibration. [JoystickCalibration] ExclThrottleSet=No SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=0 RudderTrimControl=0 CowlFlaps1Control=0 CowlFlaps2Control=0 CowlFlaps3Control=0 CowlFlaps4Control=0 MaxSteerSpeed=60 SlewAhead=-16380,-512,512,16380 SlewSide=-16380,-512,512,16380 SlewAlt=-16380,-512,512,16380 SlewHeading=-16380,-512,512,16380 Throttle1=-16380,-512,512,16380/8 Spoilers=-16384,258,10449,16383/24 Throttle2=-16380,-512,512,16380/8 Aileron=-15051,-1597,1573,15073/8 Elevator=-13544,-7318,1638,13835/8 Rudder=-14043,-910,1024,14080/8 LeftBrake=-11312,16383/8 RightBrake=-11442,16256/8 [buttons] 1=P1,0,C65751,0 2=P1,8,C1001,0 3=U1,8,C1002,0 7=P1,5,C66080,0 8=P1,4,C66079,0 17=R1,3,C66279,0 18=R1,2,C66278,0 19=R1,10,C65607,0 20=R1,11,C65615,0 21=R1,1,C65602,0 22=U1,1,C65604,0 23=P1,9,C1068,0 24=U1,9,C1069,0 25=R1,32,C65734,0 48=U1,32,C66415,0 49=R1,38,C65671,0 50=U1,38,C66415,0 51=R1,36,C65735,0 52=U1,36,C66415,0 53=R1,34,C65672,0 54=U1,34,C66415,0 55=R1,39,C65854,0 56=U1,39,C66415,0 57=R1,33,C65856,0 58=U1,33,C66415,0 59=R1,35,C65857,0 60=U1,35,C66415,0 61=R1,37,C65855,0 62=U1,37,C66415,0 63=P1,7,C65758,0 64=P1,6,C65759,0 [Axes.PMDG 737-800 Atlantic Sun Airways] 0=0X,256,D,7,0,0,0 1=0Y,256,D,8,0,0,0 2=0Z,256,D,3,0,0,0 3=1X,256,D,1,0,0,0 4=1Y,256,D,2,0,0,0 5=1Z,256,D,22,0,0,0 6=1R,256,D,9,0,0,0 7=1U,256,D,10,0,0,0 [JoystickCalibration.PMDG 737-800 Atlantic Sun Airways] ExclThrottleSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=0 RudderTrimControl=0 CowlFlaps1Control=0 CowlFlaps2Control=0 CowlFlaps3Control=0 CowlFlaps4Control=0 MaxSteerSpeed=60 Throttle1=-16383,-16383,-13544,16383/8 Throttle2=-16383,-16383,-16124,16383/8 Spoilers=-16384,258,10449,16383/24 SlewHeading=-16380,-512,512,16380 SlewAlt=-16380,-512,512,16380 SlewSide=-16380,-512,512,16380 SlewAhead=-16380,-512,512,16380 Aileron=-15051,-1597,1573,15073/8 Elevator=-13544,-7318,1638,13835/8 Rudder=-14043,-910,1024,14080/8 LeftBrake=-11312,16383/24 RightBrake=-11442,16256/24 [Keys.PMDG 737-800 Atlantic Sun Airways] [Axes.Atlantic Sun Airways PMDG B747-400] 0=0X,256,D,7,0,0,0 1=0Y,256,D,8,0,0,0 2=0Z,256,D,3,0,0,0 3=1X,256,D,1,0,0,0 4=1Y,256,D,2,0,0,0 5=1Z,256,D,22,0,0,0 6=1R,256,D,9,10,0,0 7=1U,256,D,11,12,0,0 [JoystickCalibration.Atlantic Sun Airways PMDG B747-400] ExclThrottleSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=0 RudderTrimControl=0 CowlFlaps1Control=0 CowlFlaps2Control=0 CowlFlaps3Control=0 CowlFlaps4Control=0 MaxSteerSpeed=60 Throttle2=-16384,-16384,-13545,16383 Spoilers=-16384,258,10449,16383/16 SlewAlt=-16380,-512,512,16380 SlewSide=-16380,-512,512,16380 SlewAhead=-16380,-512,512,16380 SlewHeading=-16380,-512,512,16380 Throttle1=-16384,-16384,-13545,16383 Throttle3=-16383,-16383,-16124,16383/8 Throttle4=-16383,-16383,-16124,16383/8 LeftBrake=-11312,16383 RightBrake=-11442,16256 Aileron=-15051,-1597,1573,15073/8 Elevator=-13544,-7318,1638,13835 Rudder=-14043,-910,1024,14080 Thanks, Jon
Pete Dowson Posted October 7, 2006 Report Posted October 7, 2006 If I load the 737 again, my throttles are out of calibration???? Why is this so? Because of a bug in the current version. Please check the Interim Versions announcement above and download 3.709 (the bug was fixed in 3.707, the day after it was first reported). Regards, Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now