Ifly3 Posted February 11, 2011 Report Posted February 11, 2011 (edited) Hi,I am flying the maddog m82,at stopped the brakes are on steady,when I am taxiing or landing the brakes pulse and it is hard to stop even with a full rwy.everything is conf.in fsuipc. I am using ch pedals and yoke,vrinsight mcpcombi,gf-tq6 quadrant. Edited February 11, 2011 by Ifly3
Pete Dowson Posted February 11, 2011 Report Posted February 11, 2011 Hi,I am flying the maddog m82,at stopped the brakes are on steady,when I am taxiing or landing the brakes pulse and it is hard to stop even with a full rwy.everything is conf.in fsuipc. I am using ch pedals and yoke,vrinsight mcpcombi,gf-tq6 quadrant. You've not calibrated the toe brakes correctly, and are engaging them on occasion when using the pedals for steering. You need to leave a good null zone so you have to really press them to engage them. Pete
Ifly3 Posted February 11, 2011 Author Report Posted February 11, 2011 You've not calibrated the toe brakes correctly, and are engaging them on occasion when using the pedals for steering. You need to leave a good null zone so you have to really press them to engage them. Pete Thanks pete,first,this is a great tool for FS,it was working fine till last week,I keep trying to calibrate,I have a good null zone ,but its like its switching on and off,i`ll keep digging and thanks for your help.
Pete Dowson Posted February 11, 2011 Report Posted February 11, 2011 Thanks pete,first,this is a great tool for FS,it was working fine till last week,I keep trying to calibrate,I have a good null zone ,but its like its switching on and off,i`ll keep digging and thanks for your help. If it is "switching on and off" without you touching anything, then either the unit is faulty, or you have a conflicting assignment somewhere. You can enable Event and Axis logging in the FSUIPC logging tab and see the events occurring in the log. You'll need to then search for the instigator. Regards Pete
Ifly3 Posted February 11, 2011 Author Report Posted February 11, 2011 Peter,it only pulses with the brake pedals pushed,I tried it in an fs 737 and it works fine.standing still the brake light is on steady,speeds above 10 kts,and it pulses and eventually the brake light does not light at all.
Ifly3 Posted February 11, 2011 Author Report Posted February 11, 2011 OK Pete,if the outside temp is below 0 c pulsing brakes,above 0c brakes are fine,guess i`ll have to stay in the south!
Pete Dowson Posted February 11, 2011 Report Posted February 11, 2011 OK Pete,if the outside temp is below 0 c pulsing brakes,above 0c brakes are fine,guess i`ll have to stay in the south! Outside temperature at your house, or in the sim world? If the latter then it sounds very much as if you have some additional simulation going on there representing freezing brakes. Are you by any chance using one of Thomas Richter's add-on programs, like the auto-brake enhancement? Or possibly the aircraft model you are using is more sophisticated than you thought? Regards Pete
Ifly3 Posted February 11, 2011 Author Report Posted February 11, 2011 HI,outside temp in sim world,other pilots have experienced in there maddog,no addon,they have there own autobrake system,strange because it only started happening,a wek ago.
Ifly3 Posted March 14, 2011 Author Report Posted March 14, 2011 Now when I land in cold snowy weather I just switch off the anti-skid system,problem solved.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now