zanichelli Posted March 5, 2013 Report Posted March 5, 2013 hello peter first sorry for my english. few days ago i download the last update of fsuipc/wideclient from the web page ,i install in fsx pc the fsuipc server and the other 3 pc the wide cliend, and all is ok during installacion. i am a progect magenta customer and fly whit my home cockpit, thats mean i have intall glass cockpit,pmsystem,cdu,mcp. after install the new update all comunication is slow down, when fly the nd continius stop and start like frezze, the pmsystem recive a signal 5 or 6 second later, is like the comunication start and stop or is change to slowly. i configure the wideclient whit tcp and upd protocoll and i see all connect and perfect, but when i fly all is slowly down. i bak whit the anterior release and bak to the normal operation,whit no problem. the fsuipc is a registration version. do you think is my problem configuration? or someting is change in the new release? thanks in advanced zanichelli michele
Pete Dowson Posted March 5, 2013 Report Posted March 5, 2013 few days ago i download the last update of fsuipc/wideclient from the web page I always need VERSION NUMBERS please! You don't even mention whether it is FSUIPC3 or FSUIPC4, FSX or ESP or P3D or FS98 or FS2000 or FS2002 or FS2004!??? after install the new update all comunication is slow down, when fly the nd continius stop and start like frezze, the pmsystem recive a signal 5 or 6 second later, is like the comunication start and stop or is change to slowly. i configure the wideclient whit tcp and upd protocoll and i see all connect and perfect, but when i fly all is slowly down. It sounds like you've made other changes apart from simply installing FSUIPC and WideFS. Check the WideServer and WideClient log files. That's what they are for, to tell you waht is going on! i bak whit the anterior release and bak to the normal operation,whit no problem. And what are the version numbers for the previous releases you are using? Note that the way WideFS works has not changed in any way affecting communications or performance for about 7 years! If you cannot figure out what the Logs are telling you, paste them into a message here. Include your INI files too please. And next time PLEASE give VERSION numbers. That's what they are for, so I can tell what you are using properly! Regards Pete
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 hello peter i fly fsx and the fsuipc version is 4.86 04-03.2013 whide client 6.86 suppose the previous version this is the log en 1 pc ********* WideClient Log [version 6.86] Class=FS98MAIN ********* Date (dmy): 05/03/13, Time 14:25:15.528: Client name is CASA 181 LUA: "C:\WideFS\Initial.LUA": not found 191 Attempting to connect now 201 Trying TCP/IP host "particular-PC" port 8002 ... 201 ... Okay, IP Address = 192.168.1.7 201 Connection made okay! 12168 Lost contact with ASE WX requester 75549 New Client Application: "IOCModules" (Id=1892) 78734 New Client Application: "pmGetWeather" (Id=1552) 80716 New Client Application: "pmSounds" (Id=256) second pc ********* WideClient Log [version 6.86] Class=FS98MAIN ********* Date (dmy): 05/03/13, Time 14:33:46.365: Client name is SERVIDORCOMEDOR 250 LUA: "C:\WideFS\Initial.LUA": not found 250 Attempting to connect now 265 Trying TCP/IP host "particular-PC" port 8002 ... 265 ... Okay, IP Address = 192.168.1.7 265 Connection made okay! 12278 Lost contact with ASE WX requester 17535 New Client Application: "pmsystems" (Id=3704) 17644 New Client Application: "pfd" (Id=2740) 17644 New Client Application: "MCP" (Id=2172) 17862 New Client Application: "pfd4" (Id=284) 19407 New Client Application: "pfd3" (Id=3708) 21357 New Client Application: "pfd2" (Id=2168) i see some error whit ASE and is tru i install the last update 1 weeks ago,is poosible this is a problem? any way whit this wide client at the moment fly correct thanks again
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 sorry peter this is fsuipc server ********* WideServer.DLL Log [version 7.86] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 03/03/13, Time 17:29:36.966: Server name is PARTICULAR-PC 18190 Initialising TCP/IP server 18190 Initialising UDP/IP server 18190 Incoming connection Accepted ok (skt=9908) TCP 18408 Connected to computer "SERVIDORCOMEDOR" running WideClient version 6.860 (skt=9908) TCP 18580 Incoming connection Accepted ok (skt=9264) TCP 18611 Connected to computer "CASA" running WideClient version 6.860 (skt=9264) TCP 18829 Incoming connection Accepted ok (skt=9544) TCP 18907 Connected to computer "COMEDOR" running WideClient version 6.860 (skt=9544) TCP 20187 Broadcasting service every 1000 mSecs 377179 **** ERROR! Sumcheck or length fails on received block (skt=9544), len=628 (time=5575680) 377179 **** (N.B. Previous block was only partial) 4426061 Error 10054: client socket disconnected at Client: removing (skt=9544) TCP 4587990 Error 10054: client socket disconnected at Client: removing (skt=9264) TCP 4682479 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 4688985 Auto-shutdown broadcast! 4690077 Closing down now ... Memory managed: Offset records: 9417 alloc, 9416 free Read buffer usage: 150677 alloc, 150677 free, max in session: 2 Write buffer usage: 349293 alloc, 349293 free, max in session: 1 Total number of received blocks having sumcheck errors = 1 Throughput maximum achieved: 96 frames/sec, 50972 bytes/sec Throughput average achieved for complete session: 25 frames/sec, 11864 bytes/sec Average receive rate from "SERVIDORCOMEDOR": 15 frames/sec, 5183 bytes/sec Average receive rate from "COMEDOR": 9 frames/sec, 1638 bytes/sec Average receive rate from "CASA": 7 frames/sec, 380 bytes/sec ********* Log file closed ********* thanks
Pete Dowson Posted March 5, 2013 Report Posted March 5, 2013 18190 Incoming connection Accepted ok (skt=9908) TCP 18408 Connected to computer "SERVIDORCOMEDOR" running WideClient version 6.860 (skt=9908) TCP 18580 Incoming connection Accepted ok (skt=9264) TCP 18611 Connected to computer "CASA" running WideClient version 6.860 (skt=9264) TCP 18829 Incoming connection Accepted ok (skt=9544) TCP 18907 Connected to computer "COMEDOR" running WideClient version 6.860 (skt=9544) TCP Any reason you are using TCP protocol? UDP is usually more efficient. I use it here with 6 PCs and Project Magenta and it is all very smooth. If using TCP is slowing things down then it will be due to lots of retries. UDP doesn't have error correction, so it needs a reliable network. This entry in your log is worrying too: 377179 **** ERROR! Sumcheck or length fails on received block (skt=9544), len=628 (time=5575680) 377179 **** (N.B. Previous block was only partial) That implies something not behaving quite so well on your Network. However, your performance figures don't look really bad: Throughput maximum achieved: 96 frames/sec, 50972 bytes/sec Throughput average achieved for complete session: 25 frames/sec, 11864 bytes/sec Average receive rate from "SERVIDORCOMEDOR": 15 frames/sec, 5183 bytes/sec Average receive rate from "COMEDOR": 9 frames/sec, 1638 bytes/sec Average receive rate from "CASA": 7 frames/sec, 380 bytes/sec What is your average FSX frame rate? Maybe you should show me the FSUIPC4 log file to. Unfortunately the WideClient log files you showed were not complete -- it looks like you did not close the WideClients first. The performance figures for those are loast, they'd be at the end. Pete
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 you right peter the upd configuration is fast (i tink) i change again due to tcp just to chek if a problem come whit the protocol. and the log is not complete becouse i have a simulator on whait for possible test. i try to change now to udp protocol en wide client and send the log thanks
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 hi peter 1- pc ********* WideClient Log [version 6.86] Class=FS98MAIN ********* Date (dmy): 05/03/13, Time 15:12:33.589: Client name is SERVIDORCOMEDOR 265 LUA: "C:\WideFS\Initial.LUA": not found 265 New Client Application: "pfd2" (Id=2168) 265 New Client Application: "pfd4" (Id=284) 265 New Client Application: "pfd3" (Id=3708) 265 Attempting to connect now 265 New Client Application: "pfd" (Id=2740) 281 New Client Application: "MCP" (Id=2172) 281 Trying UDP/IP host "particular-PC" port 8002 ... 281 ... Okay, IP Address = 192.168.1.7 281 UDP connectionless mode set up okay! 406 New Client Application: "pmsystems" (Id=3704) 593 Connection made: receiving okay! 12199 Lost contact with ASE WX requester 2-pc ********* WideClient Log [version 6.86] Class=FS98MAIN ********* Date (dmy): 05/03/13, Time 15:14:45.549: Client name is CASA 200 LUA: "C:\WideFS\Initial.LUA": not found 200 Attempting to connect now 220 Trying UDP/IP host "particular-PC" port 8002 ... 220 ... Okay, IP Address = 192.168.1.7 220 UDP connectionless mode set up okay! 301 New Client Application: "pmSounds" (Id=256) 501 New Client Application: "IOCModules" (Id=1892) 501 Connection made: receiving okay! 2033 New Client Application: "pmGetWeather" (Id=1552) 12158 Lost contact with ASE WX requester 19648 New Client Application: "iocard" (Id=564) server pc ********* WideServer.DLL Log [version 7.86] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 05/03/13, Time 14:24:20.166: Server name is PARTICULAR-PC 15959 Initialising TCP/IP server 15959 Initialising UDP/IP server 16115 Broadcasting service every 1000 mSecs 47955 Incoming connection Accepted ok (skt=10448) TCP 48236 Connected to computer "CASA" running WideClient version 6.860 (skt=10448) TCP 592242 Incoming connection Accepted ok (skt=8744) TCP 592507 Connected to computer "SERVIDORCOMEDOR" running WideClient version 6.860 (skt=8744) TCP 2888686 Error 10054: client socket disconnected at Client: removing (skt=8744) TCP 2919668 Connected to computer "SERVIDORCOMEDOR" running WideClient version 6.860 (IP=192.168.1.42) UDP 2995126 Error 10053: client socket disconnected at Client: removing (skt=10448) TCP 3018027 Connected to computer "CASA" running WideClient version 6.860 (IP=192.168.1.32) UDP the fsx is running on 28-32 fps on parking whit this programm run ivao teamspeek ase (last version) gsx pmsound autobreak and iocard efis the second pc wideclient iocard for hoveread pmsound and rayanayr record fly. the pc number 3 pmsystem glasscockpit eicam mcp antill now work good, the possibility maybe the last update from hifi simulation (ase) thanks again iomodules for nav1-nav2-comm1-comm2- atc transponder
Pete Dowson Posted March 5, 2013 Report Posted March 5, 2013 antill now work good, the possibility maybe the last update from hifi simulation (ase) With all those logs unfinished there's no useful information. Pete
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 sorry fsuipc4 log ********* FSUIPC4, Version 4.86 by Pete Dowson ********* Running inside FSX on Windows 7 Module base=6DBD0000 User Name="michele zanichelli" User Addr="zanichellimichele@hotmail.com" FSUIPC4 Key is provided WideFS7 Key is provided 32 System time = 05/03/2013 14:22:17 468 FLT UNC path = "\\PARTICULAR-PC\Flight Simulator X Files\" 1670 Trying to connect to SimConnect Acc/SP2 Oct07 ... 1685 FS UNC path = "\\PARTICULAR-PC\Microsoft Flight Simulator X\" 1982 LogOptions=00000000 00000001 1982 SIM1 Frictions access gained 1982 Wind smoothing fix is fully installed 1982 G3D.DLL fix attempt installed ok 1982 SimConnect_Open succeeded: waiting to check version okay 1982 Trying to use SimConnect Acc/SP2 Oct07 5351 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 5351 Initialising SimConnect data requests now 5351 FSUIPC Menu entry added 5414 \\PARTICULAR-PC\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 5414 \\PARTICULAR-PC\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 28330 \\PARTICULAR-PC\Microsoft Flight Simulator X\SimObjects\Airplanes\Project Magenta 738\PMX737-800.AIR 28330 Weather Mode now = Global 28346 \\PARTICULAR-PC\Flight Simulator X Files\lebl.FLT 29422 System time = 05/03/2013 14:22:46, Simulator time = 22:47:14 (21:47Z) 29438 Aircraft="Project Magenta 737-800 Paint1 (default)" 118561 Sim stopped: average frame rate for last 42 secs = 20.1 fps 122976 Starting everything now ... 122992 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" 123007 AES Link established 123023 Run: "C:\Users\Miguel\Desktop\pmSounds\pmSounds.exe" 123054 Run: "C:\Program Files (x86)\HiFi\AS2012\AS2012_Exec.exe" 123085 Run: "C:\Users\Miguel\Desktop\EFIS\sioc_efis.exe" 123101 Run: "C:\Program Files (x86)\VAC System\VACSystem.exe" 123101 Run: "C:\Program Files (x86)\Teamspeak2_RC2\TeamSpeak.exe" 123163 Advanced Weather Interface Enabled 149574 ASE with WX requester detected 196437 Weather Mode now = Theme 196609 Weather Mode now = Global 758899 Exception 20 "DATA_ERROR", Ref 5069, Index param 1 on write SetData for "GENERAL ENG OIL LEAKED PERCENT:1" 758899 Exception 20 "DATA_ERROR", Ref 5070, Index param 1 on write SetData for "GENERAL ENG OIL LEAKED PERCENT:2" 3567962 Sim stopped: average frame rate for last 3377 secs = 18.6 fps
Pete Dowson Posted March 5, 2013 Report Posted March 5, 2013 sorry fsuipc4 log again, another log, another one unfinished. Please NEVER post logs without first closing the relevant programs! I already told you "With all those logs unfinished there's no useful information.!!!! Why are you sending this in any case? Last post you said "antill now work good"!? You are confusing matters. The logs are unfinished and otherwise show things are okay, with reasonable performance as far as I can see with limited data. Your FSUIPC log shows an average FS frame rate of only 18 fps but one of your Client PCs was getting serviced by WideFS at 15 fps, which is about what I'd expect in such circumstances. Please PLEASE stop posting incomplete logs. They are not useful. Pete
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 sorry peter this is fsuipc4.log ********* FSUIPC4, Version 4.86 by Pete Dowson ********* Running inside FSX on Windows 7 Module base=6DBD0000 User Name="michele zanichelli" User Addr="zanichellimichele@hotmail.com" FSUIPC4 Key is provided WideFS7 Key is provided 32 System time = 05/03/2013 14:22:17 468 FLT UNC path = "\\PARTICULAR-PC\Flight Simulator X Files\" 1670 Trying to connect to SimConnect Acc/SP2 Oct07 ... 1685 FS UNC path = "\\PARTICULAR-PC\Microsoft Flight Simulator X\" 1982 LogOptions=00000000 00000001 1982 SIM1 Frictions access gained 1982 Wind smoothing fix is fully installed 1982 G3D.DLL fix attempt installed ok 1982 SimConnect_Open succeeded: waiting to check version okay 1982 Trying to use SimConnect Acc/SP2 Oct07 5351 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 5351 Initialising SimConnect data requests now 5351 FSUIPC Menu entry added 5414 \\PARTICULAR-PC\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 5414 \\PARTICULAR-PC\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 28330 \\PARTICULAR-PC\Microsoft Flight Simulator X\SimObjects\Airplanes\Project Magenta 738\PMX737-800.AIR 28330 Weather Mode now = Global 28346 \\PARTICULAR-PC\Flight Simulator X Files\lebl.FLT 29422 System time = 05/03/2013 14:22:46, Simulator time = 22:47:14 (21:47Z) 29438 Aircraft="Project Magenta 737-800 Paint1 (default)" 118561 Sim stopped: average frame rate for last 42 secs = 20.1 fps 122976 Starting everything now ... 122992 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" 123007 AES Link established 123023 Run: "C:\Users\Miguel\Desktop\pmSounds\pmSounds.exe" 123054 Run: "C:\Program Files (x86)\HiFi\AS2012\AS2012_Exec.exe" 123085 Run: "C:\Users\Miguel\Desktop\EFIS\sioc_efis.exe" 123101 Run: "C:\Program Files (x86)\VAC System\VACSystem.exe" 123101 Run: "C:\Program Files (x86)\Teamspeak2_RC2\TeamSpeak.exe" 123163 Advanced Weather Interface Enabled 149574 ASE with WX requester detected 196437 Weather Mode now = Theme 196609 Weather Mode now = Global 758899 Exception 20 "DATA_ERROR", Ref 5069, Index param 1 on write SetData for "GENERAL ENG OIL LEAKED PERCENT:1" 758899 Exception 20 "DATA_ERROR", Ref 5070, Index param 1 on write SetData for "GENERAL ENG OIL LEAKED PERCENT:2" 3567962 Sim stopped: average frame rate for last 3377 secs = 18.6 fps 5487008 Sim stopped: average frame rate for last 1879 secs = 23.1 fps 5492796 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" 5503170 System time = 05/03/2013 15:54:00, Simulator time = 15:54:13 (14:54Z) 5503170 *** FSUIPC log file being closed Average frame rate for running time of 5325 secs = 20.2 fps G3D fix: Passes 19075, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 5838 Allocs, 5700 Freed ********* FSUIPC Log file closed *********** and this is wideclient ********* WideClient Log [version 6.86] Class=FS98MAIN ********* Date (dmy): 05/03/13, Time 15:12:33.589: Client name is SERVIDORCOMEDOR 265 LUA: "C:\WideFS\Initial.LUA": not found 265 New Client Application: "pfd2" (Id=2168) 265 New Client Application: "pfd4" (Id=284) 265 New Client Application: "pfd3" (Id=3708) 265 Attempting to connect now 265 New Client Application: "pfd" (Id=2740) 281 New Client Application: "MCP" (Id=2172) 281 Trying UDP/IP host "particular-PC" port 8002 ... 281 ... Okay, IP Address = 192.168.1.7 281 UDP connectionless mode set up okay! 406 New Client Application: "pmsystems" (Id=3704) 593 Connection made: receiving okay! 12199 Lost contact with ASE WX requester 2451135 Received shutdown offset code = ABCD 2451135 FS closing down (param=ABCD), disconnecting 2451135 ********* Interim performance summary ********* 2451135 Total time connected so far = 2448 seconds 2451135 Reception maximum so far: 32 frames/sec, 27555 bytes/sec 2451135 Reception average whilst connected so far: 19 frames/sec, 1192 bytes/sec 2451135 Transmission maximum so far: 136 frames/sec, 7108 bytes/sec 2451135 Transmission average whilst connected so far: 64 frames/sec, 423 bytes/sec 2451135 Max receive buffer = 1602, Max send depth = 26, Send frames lost = 0 2451135 **************** Individual client application activity **************** 2451135 Client 2168 requests: 45889 (Ave 18/sec), Data: 196241392 bytes (80163/sec), Average 4276 bytes/Process 2451135 Client 284 requests: 48253 (Ave 19/sec), Data: 205889534 bytes (84105/sec), Average 4266 bytes/Process 2451135 Client 3708 requests: 48370 (Ave 19/sec), Data: 206340214 bytes (84289/sec), Average 4265 bytes/Process 2451135 Client 2740 requests: 47251 (Ave 19/sec), Data: 198760052 bytes (81192/sec), Average 4206 bytes/Process 2451135 Client 2172 requests: 50891 (Ave 20/sec), Data: 90756148 bytes (37073/sec), Average 1783 bytes/Process 2451135 Client 3704 requests: 17366 (Ave 7/sec), Data: 64085686 bytes (26178/sec), Average 3690 bytes/Process 2451135 *********************************************** 2451244 Received shutdown offset code = ABCD 2463646 Timed out UDP reception: connection assumed lost! 2470011 Trying UDP/IP host "particular-PC" port 8002 ... 2470011 ... Okay, IP Address = 192.168.1.7 2470011 UDP connectionless mode set up okay! 2506234 Timed out response: connection assumed lost! 2506234 Ready to try connection again 2506297 Timed out response: connection assumed lost! 2507295 Attempting to connect now 2507295 UDP connectionless mode set up okay! 2525641 Timed out response: connection assumed lost! 2525641 Ready to try connection again 2525703 Timed out response: connection assumed lost! 2526702 Attempting to connect now 2526702 UDP connectionless mode set up okay! 2545094 Timed out response: connection assumed lost! 2545094 Ready to try connection again 2545156 Timed out response: connection assumed lost! 2546155 Attempting to connect now 2548760 Trying UDP/IP host "particular-PC" port 8002 ... 2548760 Error on client gethostbyname() [Error=11004] Valid name, no data record of requested type 2610537 Trying UDP/IP host "particular-PC" port 8002 ... 2610537 Error on client gethostbyname() [Error=11004] Valid name, no data record of requested type 2672126 Trying UDP/IP host "particular-PC" port 8002 ... 2672126 Error on client gethostbyname() [Error=11004] Valid name, no data record of requested type 2712078 ****** End of session performance summary ****** 2712078 Total time connected = 2448 seconds 2712078 Reception maximum: 32 frames/sec, 27555 bytes/sec 2712078 Reception average whilst connected: 19 frames/sec, 1192 bytes/sec 2712078 Transmission maximum: 136 frames/sec, 7108 bytes/sec 2712078 Transmission average whilst connected: 64 frames/sec, 423 bytes/sec 2712078 Max receive buffer = 1602, Max send depth = 26, Send frames lost = 5 2712078 **************** Individual client application activity **************** 2712078 Client 2168 requests: 49241 (Ave 20/sec), Data: 210572768 bytes (86018/sec), Average 4276 bytes/Process 2712078 Client 284 requests: 51697 (Ave 21/sec), Data: 220773822 bytes (90185/sec), Average 4270 bytes/Process 2712078 Client 3708 requests: 51803 (Ave 21/sec), Data: 221176910 bytes (90350/sec), Average 4269 bytes/Process 2712078 Client 2740 requests: 50525 (Ave 20/sec), Data: 211858476 bytes (86543/sec), Average 4193 bytes/Process 2712078 Client 2172 requests: 54819 (Ave 22/sec), Data: 96251110 bytes (39318/sec), Average 1755 bytes/Process 2712078 Client 3704 requests: 18896 (Ave 7/sec), Data: 69899779 bytes (28553/sec), Average 3699 bytes/Process 2712078 ********* Log file closed (Buffers: MaxUsed 27, Alloc 327377 Freed 327377 Refused 0) ********* this is log close thanks
Pete Dowson Posted March 5, 2013 Report Posted March 5, 2013 Average frame rate for running time of 5325 secs = 20.2 fps So FSX is running at 20 fps, and the applications on that client are getting at least that same frame rate each, excpet one: 2712078 **************** Individual client application activity **************** 2712078 Client 2168 requests: 49241 (Ave 20/sec), Data: 210572768 bytes (86018/sec), Average 4276 bytes/Process 2712078 Client 284 requests: 51697 (Ave 21/sec), Data: 220773822 bytes (90185/sec), Average 4270 bytes/Process 2712078 Client 3708 requests: 51803 (Ave 21/sec), Data: 221176910 bytes (90350/sec), Average 4269 bytes/Process 2712078 Client 2740 requests: 50525 (Ave 20/sec), Data: 211858476 bytes (86543/sec), Average 4193 bytes/Process 2712078 Client 2172 requests: 54819 (Ave 22/sec), Data: 96251110 bytes (39318/sec), Average 1755 bytes/Process 2712078 Client 3704 requests: 18896 (Ave 7/sec), Data: 69899779 bytes (28553/sec), Average 3699 bytes/Process The only exception is pmSystems, which is probably okay as that only needs to deal with overhead changes: 406 New Client Application: "pmsystems" (Id=3704) The only worry is the loading on that Client: 2712078 Max receive buffer = 1602, Max send depth = 26, Send frames lost = 5 You forgot to send the Server log, which would show its performance, but on the whole it certainly looks as if WideFS and FSUIPC are performing very well on a system which is struggkling with rather too much load. 20 fps is okay, but not exactly good. I also think you are rather overloading that Client with 4 copies of PPM's PFD! Why on Earth are you doing that? With F6 expanded mode you could have all 5 displays -- Pilot and copilot PFD and ND and the EICAS all from one copy. When I used to run several copies of PFD on one PC I got awful stuttering, especially in climbs, turns and descents. The problem I think is PM's use of OpenGL instead of DirectX. OpenGL is no where near as fast these days. Regards Pete
zanichelli Posted March 5, 2013 Author Report Posted March 5, 2013 hi peter can you explain to me what you mind f6 expanded mode. i use 1 pc whit 3 monitor on matrox 1 monitor capitan size 2 monitor eicam 3 monitor copilot and in the second monitor whit eicam i bild the alitude and speed indicator to see in the hole of the mip thanks again
Pete Dowson Posted March 6, 2013 Report Posted March 6, 2013 hi peter can you explain to me what you mind f6 expanded mode. i use 1 pc whit 3 monitor on matrox 1 monitor capitan size 2 monitor eicam 3 monitor copilot and in the second monitor whit eicam i bild the alitude and speed indicator to see in the hole of the mip By making all three monitors one large screen you can stretch a single copy of PM PFD over the whole width and have pilot, eicas and copilot screens all in one window. I'm afraid I can't really explain how to do it -- I've not messed with my PM setup for years and don't want to disturb it as it took months to get right. I'm not using Expanded F6 mode any more -- I have spearate mini-PCs for each part. It's the only way I ever got them smooth enough. Ask on the Project Magenta support section of MyCockpit (http://www.mycockpit.org/forums). Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now