Control Axis/Calibration issues

[Jamil Martin]

Pete Dowson,

 

                   I have an issue with the program reading my control inputs.  My issue lies with the rudder.  Hopefully I can explain this well, but after I press in the right pedal it will read -1684, In 64, and out -96.  When I press the left pedal it will read left 1683, In -353, Out -321, or 64 for both.  So I basically have poor control on the ground with the rudder pedals and the airplane will always pull to the right.  There is no dead zone or neutral area.  All of this happens under the A-10 profile and seems to work better under the T-38 profile.  I guess when I mapped the controls everything worked fine.  No matter what I do now, those numbers don't get any better.  Since I can't seem to alleviate the control issue, my plan was to run the controls through FSX but I can't seem to shut off the rudder pedals through FSUIPC to allow smooth operation.  So my question is how can I fix this issue without deleting the profile?  Thanks!

 

V/R,

 

 

Jamil Martin

[Porthos]

Jamil one thing I did when I had a similar problem

 

Made sure the delta for each axis was a small as possible.

[Thomas Richter]

Hi,

 

what does the rudder show in Windows GameController? Did you calibrate the rudder pedals in windows, because FSUIPC gets from Windows the value?