Meganer26r Posted December 12, 2015 Report Posted December 12, 2015 I have just had my Alpine computer upgraded with an NVidia GTX 970 4GB DDR5 Jetstream Graphics Card and a Samsung 1TB SSD EVO 850 Series Memory. I have loaded FSUIPC4 4.948 followed by PFCDLL 2.41. Neither I or Alpine Computers can get the computer to recognise the Cirrus 11 console. Any ideas??
Pete Dowson Posted December 12, 2015 Report Posted December 12, 2015 I have just had my Alpine computer upgraded with an NVidia GTX 970 4GB DDR5 Jetstream Graphics Card and a Samsung 1TB SSD EVO 850 Series Memory. I have loaded FSUIPC4 4.948 followed by PFCDLL 2.41. Neither I or Alpine Computers can get the computer to recognise the Cirrus 11 console. Did you not get any documentation at all from PFC? I don't actually support PFC myself, they have their own support. PFC.DLL 2.41 will not work with FSUIPC4 as it is the version for FS9, as clearly shown. The one for FSX and later is PFCFSX.DLL. Why are you downloading the wrong module? Futhermore, both those drivers are for the old-style serial port devices which PFC used to make. The Cirrus 2 Pro which I used to have was not a comm/serial port device at all, but a full blown USB HID device which most certainly should at least be seen by Windows. The freeware driver I made for PFC HID interface devices, including the Cirrus, is PFCHID.DLL. Pete
Paul__ Posted December 14, 2015 Report Posted December 14, 2015 Good afternoon Pete This is Paul from Alpine ..... I got Alan to install the PFCFSX.DLL file and not the PFC.DLL one ..... (He got that wrong in his message to you) I also made sure that the latest registered version of FSUIPC was installed prior to this ..... THE Cirrus II he has is of the Com Port variety ..... I cannot understand why the PFC module is not showing up under the Toolbar 'Add on' entry ...... FSUIPC is there though Something else which was odd .... when he started FSX after installing FSUIPC and the PFCFSX you normally get a message asking if you want to add the module but for some reason this did not happen ... Very odd! Your thoughts would be kindly appreciated Kind regards Paul
Pete Dowson Posted December 14, 2015 Report Posted December 14, 2015 THE Cirrus II he has is of the Com Port variety ..... Really? I never saw one of those. It must be pretty old? I cannot understand why the PFC module is not showing up under the Toolbar 'Add on' entry ...... FSUIPC is there though If it is in the FSX Modles folder it will be seen and loaded by FSUIPC. And it is FSUIPC which places the entry in the Add-Ons menu on its behalf. I use PFCFSX.DLL all the time for my PFC 737NG cockpit. Perhaps you should show me the FSUIPC4.LOG file also from the Modules folder. Paste it into a message here. Something else which was odd .... when he started FSX after installing FSUIPC and the PFCFSX you normally get a message asking if you want to add the module but for some reason this did not happen ... You won't get one for PFCFSX because it isn't loaded by FS, but by FSUIPC. I wouldn't worry if you didn't get one for FSUIPC -- if the Add-Ons menu entry is there for it, it is loading okay. Pete
Paul__ Posted December 14, 2015 Report Posted December 14, 2015 Hi Pete Thank you for your reply I will speak with Alan in the morning and get him to send the log over Paul
Meganer26r Posted December 17, 2015 Author Report Posted December 17, 2015 Hi Pete, Here is the FSUIPC log file as promised. fsx.exe version = 10.0.61472.0Reading options from "C:\FSX\Modules\FSUIPC4.ini"Running inside FSX on Windows 7Module base=63C60000User Name="Alan Waters"User Addr="kukltd@btconnect.com"FSUIPC4 Key is providedWIDEFS7 not user registered, or expired 78 System time = 16/12/2015 16:01:04 78 FLT path = "C:\Users\Owner\Documents\Flight Simulator X Files\" 78 ------ Module Version Check ------ 78 acontain.dll: 10.0.61472.0 78 api.dll: 10.0.61472.0 78 controls.dll: 10.0.61472.0 78 fs-traffic.dll: 10.0.61472.0 78 G3D.dll: 10.0.61472.0 78 sim1.dll: 10.0.61472.0 78 visualfx.dll: 10.0.61472.0 78 weather.dll: 10.0.61472.0 78 window.dll: 10.0.61472.0 78 ---------------------------------- 218 Trying to connect to SimConnect Acc/SP2 Oct07 ... 249 FS path = "C:\FSX\" 608 ---------------------- Joystick Device Scan ----------------------- 624 Product= Saitek Pro Flight Rudder Pedals 639 Manufacturer= Saitek 639 Vendor=06A3, Product=0763 (Version 1.0) 655 Serial Number= 655 Product= USB Game Controllers 655 Manufacturer= Mega World 655 Vendor=07B5, Product=0317 (Version 1.1) 655 Serial Number= 655 ------------------------------------------------------------------- 671 LogOptions=00000000 00000001 671 ------------------------------------------------------------------- 671 ------ Setting the hooks and direct calls into the simulator ------ 671 --- CONTROLS timer memory location obtained ok 671 --- SIM1 Frictions access gained 671 --- FS Controls Table located ok 671 --- Installed Mouse Macro hooks ok. 671 --- Wind smoothing fix is fully installed 671 --- G3D.DLL fix attempt installed ok 671 --- All links checked okay 671 ------------------------------------------------------------------- 671 SimConnect_Open succeeded: waiting to check version okay 671 Trying to use SimConnect Acc/SP2 Oct07 2995 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 2995 Initialising SimConnect data requests now 2995 FSUIPC Menu entry added 3042 C:\Users\Owner\Documents\Flight Simulator X Files\Opening Flight.FLT 3042 C:\FSX\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.AIR 26317 System time = 16/12/2015 16:01:30, Simulator time = 16:01:06 (16:01Z) 26317 Aircraft="Mooney Bravo" 27316 Starting everything now ... 28642 Advanced Weather Interface Enabled 49312 Sim stopped: average frame rate for last 23 secs = 76.3 fps 1663267 Sim stopped: average frame rate for last 1580 secs = 67.1 fps 2208506 Sim stopped: average frame rate for last 453 secs = 52.0 fps 2287645 Sim stopped: average frame rate for last 21 secs = 45.1 fps 2424099 Sim stopped: average frame rate for last 104 secs = 42.3 fps 2428140 System time = 16/12/2015 16:41:32, Simulator time = 16:37:28 (16:37Z) 2428140 *** FSUIPC log file being closedMinimum frame rate was 22.1 fps, Maximum was 141.9 fpsMinimum available memory recorded was 2268MbAverage frame rate for running time of 2182 secs = 62.7 fpsG3D fix: Passes 46388, Null pointers 0, Bad pointers 0, Separate instances 0Memory managed: 967 Allocs, 967 Freed********* FSUIPC Log file closed *********** I hope you can sort this for me. Cheers Alan
Pete Dowson Posted December 17, 2015 Report Posted December 17, 2015 Here is the FSUIPC log file as promised. Well, you appear to have omitted the first line which tells me the version of FSUIPC. Please don't do that next time. FSUIPC is running fine, so it looks like it cannot find PFCFSX.DLL in the Modules folder. To confirm that, please download this latest (as yet unreleased) version and copy it into the FS Modules folder: FSUIPC4948f.zip Then edit the FSUIPC4.INI file (it is a simple text file, like the LOG), adding Debug=Please LogExtras=1 to the [General] section. Then run FS again and show me the log (the complete log this time, please). Also, try running FS "as administrator" (which is, I think, a right-click option on the EXE or icon). See if that makes any difference. Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now