fsuipc4 ignores setting entries or makes a bogus entry

[douglasv]

1)- when calibrating the ailerons or elevator

      moving the yoke to an extreme position

      and then pressing set - fsuipc4 - Ignores making the entry. 

     but leaves the pre-populated value

 

2)- Clicking set starts with all boxes populated

 

3)- with slope set at +15 controls give a hair trigger response

 

I reinstalled fsuipc4 - no help

 

 

windows 10 - 64 bit ,

steam fsx,

alapeo diamond dh42 airplane

3 monitors

 

fsuipc4 is not happy, Why?

[Pete Dowson]

1)- when calibrating the ailerons or elevator

      moving the yoke to an extreme position

      and then pressing set - fsuipc4 - Ignores making the entry. 

     but leaves the pre-populated value

 

2)- Clicking set starts with all boxes populated

 

3)- with slope set at +15 controls give a hair trigger response

 

First of all you do always really need to state the version number of FSUIPC.

 

Regarding your point 1, you need to be clearer. There are 4 set buttons. Please describe what you are doing. There is no way FSUIPC "ignores" a value if you are doing the correct sequence -- follow the numbered steps in the User Guide for correct calibration.

 

Point 2 is also meaningless. Of course all boxes have default initial values. The top left SET button is the one which enables calibration, after which it changes to RESET enabling you to cancel calibration. Only the SET buttons above each calibration value transfer the current IN value to the box(es) beneath. That's part of the process of calibration.

 

A slope of +15 gives the flattest initial response (virtually no change at all for initial movement) but extreme response the other end -- it has to to cover the range needed. It is -15 which will give you a "hair trigger".

 

fsuipc4 is not happy, Why?

 

What does that mean?

 

Pete