CFG874 Posted May 24, 2016 Report Posted May 24, 2016 Hi Pete,I get constantly on my EMAIL MESSAGES always reisener@t-online.de and requests to you from this forum.This since about 2 weeks. Please times for viruses blank check.CFG874 Bernd2 examples: The simFlight Network Forums Hi CFG874,WarpD has posted a topic, FSUIPC, SimConnect and joystick reading Posted in FSUIPC Support Pete Dowson Modules Hi Pete, Hope all is well across the pond for you. I have an odd issue I'm running into and I'm not sure what's going wrong, but hope that you can provide me insight. This is all in FSX:Acceleration with your current FSUIPC. I have set up an SimConnect interface to recieve the AXIS_THROTTLE1_SET and AXIS_THROTTLE2_SET events. The purpose is to intercept the axis values set by the joystick, override them and transmit the corrected values to the sim via SimConnect. I am using a Saitek X55 HOTAS which has 2 throttles. If I don't have FSUIPC running at all (module not loaded) I see a range of -7040 to 7040 in those events. If I have FSUIPC running, with no calibration active I see the inputs alternating between a min/max of -7040 to 7040 and a min/max of -16384 to 16383. I have never seen a behavior like this before and to be quite honest it makes no sense to me. If I calibrate... it still behaves that way. Any thoughts/ideas as to why I would be seeing such odd behavior? Go to this Topic — The simFlight Network Forums You are receiving this email because you are following the Forum 'FSUIPC Support Pete Dowson Modules'. Prefer to stop receiving these emails? Unfollow or Adjust your notification preferences. The simFlight Network Forums Hi CFG874,samik has posted a topic, FSUIPC & Eaglesoft Cessna Citation X Posted in FSUIPC Support Pete Dowson Modules I purchased the Eaglesoft Cessna Citation X recently and was advised to purchase a registered version of FSUIPC along to have a fully functional fadec. I followed the advise and purchased a registered FSUIPC 4 and set up the joystick and throttle. Both are working fine with a throttle idle of 24% N1. I applied the axeswrongrange = yes, as advised in some online fora. My problem is that with the ES Cessna aircraft, FSX crashes to desktop randomly. Recently the crashes have become too frequent and happen right on the ground while setting up FMS. I have read some posts about this issue and understand it is related to corrupt weather files. So I deleted the .WX files from document folder as well as the waether. bin file from appdata\roaming folder as advised. However this did not solve the problem and FSX crashed at the very next flight on ground. I am producing below excerpts from the log file for the events that happened during the crash. Please help me with this issue so that I have a good return on the investments I made on these two apparently top class softwares related to flight sim. Pls do not keep me waiting at moderation and I request a response at the earliest. Regards, Samik ********* FSUIPC4, Version 4.949p by Pete Dowson ********* fsx.exe version = 10.0.61637.0 Reading options from "C:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=616E0000 User Name="samik gupta" User Addr="samik66@yahoo.com" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 1125 System time = 21/05/2016 18:12:11 1125 FLT path = "C:\Users\samik\Documents\Flight Simulator X Files\" 1141 ------ Module Version Check ------ 1141 acontain.dll: 10.0.61637.0 1141 api.dll: 10.0.61637.0 1141 controls.dll: 10.0.61637.0 1141 fs-traffic.dll: 10.0.61637.0 1141 G3D.dll: 10.0.61637.0 1141 language.dll: 10.0.61637.0 1141 sim1.dll: 10.0.61637.0 1141 visualfx.dll: 10.0.61637.0 1141 weather.dll: 10.0.61637.0 1141 window.dll: 10.0.61637.0 1141 ---------------------------------- 1547 Trying to connect to SimConnect Acc/SP2 Oct07 ... 1563 FS path = "C:\FSX\" 2031 ---------------------- Joystick Device Scan ----------------------- 2047 Product= MetalStrik 3D 2047 Manufacturer= MetalStrik 3D 2047 Vendor=0583, Product=B011 (Version 1.0) 2047 Serial Number= MetalStrik 3D 2047 Product= Wireless Device 2047 Manufacturer= Lite-On Technology Corp. 2047 Vendor=04CA, Product=006F (Version 0.53) 2047 Serial Number= Lite-On Technology Corp. 2047 ------------------------------------------------------------------- 2078 LogOptions=F0000000 0000001F 2078 ------------------------------------------------------------------- 2078 ------ Setting the hooks and direct calls into the simulator ------ 2078 --- CONTROLS timer memory location obtained ok 2094 --- SIM1 Frictions access gained 2110 --- FS Controls Table located ok 2110 --- Installed Mouse Macro hooks ok. 2110 --- Wind smoothing fix is fully installed 2110 --- G3D.DLL fix attempt installed ok 2110 --- All links checked okay 2110 ------------------------------------------------------------------- 2110 SimConnect_Open succeeded: waiting to check version okay 2110 Trying to use SimConnect Acc/SP2 Oct07 14219 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 14219 Initialising SimConnect data requests now 14219 FSUIPC Menu entry added 14297 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 14297 *** EVENT: Cntrl= 66078 (0x0001021e), Param= 2016 (0x000007e0) ZULU_YEAR_SET 14297 *** EVENT: Cntrl= 66077 (0x0001021d), Param= 142 (0x0000008e) ZULU_DAY_SET 14297 *** EVENT: Cntrl= 66075 (0x0001021b), Param= 12 (0x0000000c) ZULU_HOURS_SET 14297 *** EVENT: Cntrl= 66076 (0x0001021c), Param= 42 (0x0000002a) ZULU_MINUTES_SET 14297 C:\FSX\FLIGHTS\OTHER\FLTSIM.FLT 14297 C:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 14969 READ1[6792] 3304, 4 bytes: 10 00 49 49 ..II 14969 READ1[6792] 3308, 4 bytes: 08 00 DE FA .... 14969 Memory in use: 754Mb, Avail=3342Mb 15453 READ1[6792] 290C, 4 bytes: 38 00 00 00 8... 15453 READ1[6792] 320C, 4 bytes: 38 00 00 00 8... 15563 READ1[6792] 8320, 1 bytes: 02 . 15563 READ1[6792] 0B63, 1 bytes: 00 . 15563 READ1[6792] 3306, 2 bytes: 49 49 II 15563 READ1[6792] 0238, 10 bytes: 00 00 00 00 00 00 00 00 00 00 .......... 15563 READ1[6792] 3C00, 256 bytes: 43 3A 5C 46 53 58 5C 53 69 6D 4F 62 6A 65 63 74 C:\FSX\SimObject 15563 73 5C 41 69 72 70 6C 61 6E 65 73 5C 41 69 72 63 s\Airplanes\Airc 15563 72 65 61 74 69 6F 6E 5F 35 38 32 53 4C 5C 41 69 reation_582SL\Ai 15563 72 63 72 65 61 74 69 6F 6E 5F 35 38 32 53 4C 2E rcreation_582SL. 15563 41 49 52 00 00 00 00 00 00 00 00 00 00 00 00 00 AIR............. 15563 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ******************************************************************************************************************************************************** 588735 READ1[6792] 3500, 24 bytes: 43 37 35 30 00 00 00 00 00 00 00 00 00 00 00 00 C750............ 588735 00 00 00 00 00 00 00 00 ........ 588735 READ1[6792] 3D00, 256 bytes: 45 61 67 6C 65 73 6F 66 74 20 43 69 74 61 74 69 Eaglesoft Citati 588735 6F 6E 20 58 20 32 2E 30 20 4E 38 30 30 45 53 00 on X 2.0 N800ES. 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 READ1[6792] 3148, 24 bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 ........ 588735 READ1[6792] 3130, 12 bytes: 00 00 00 00 00 00 00 00 00 00 00 00 ............ 588735 READ1[6792] 313C, 12 bytes: 4E 38 30 30 45 53 00 00 00 00 00 00 N800ES...... 588735 READ1[6792] 0240, 2 bytes: E0 07 .. 588735 READ1[6792] 023E, 2 bytes: 8E 00 .. 588735 READ1[6792] 023B, 1 bytes: 0C . 588735 READ1[6792] 023C, 1 bytes: 33 3 588735 READ1[6792] 0238, 1 bytes: 0E . 588735 READ1[6792] 0239, 1 bytes: 33 3 588735 READ1[6792] 023A, 1 bytes: 39 9 588735 READ1[6792] 0248, 2 bytes: 01 00 .. 588735 READ1[6792] 0D70, 40 bytes: 4C 75 61 20 46 53 50 53 00 00 00 00 00 00 00 00 Lua FSPS........ 588735 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 588735 00 00 00 00 00 00 00 00 ........ 588735 READ1[6792] 0D6C, 4 bytes: 00 00 00 00 .... 588735 Exception 15 "WEATHER_UNABLE_TO_GET_OBSERVATION", Ref 6133, Index param -1 on Weather request type 5 588735 WX Error: Exception 15, WX request type 5, Lat=48.9958, Lon=2.5544, Alt=0.0m 588735 WRITE0[6792] 310A, 2 bytes: 08 00 .. 588735 READ0[6792] 332E, 2 bytes: 00 00 .. 588735 READ0[6792] 3330, 2 bytes: 00 00 .. 588735 READ0[6792] 3332, 2 bytes: 00 00 .. 588735 WRITE0[6792] 088C, 2 bytes: 01 00 .. 588735 WRITE0[6792] 0924, 2 bytes: 01 00 .. 588735 READ0[6792] 7B92, 1 bytes: 00 . 588735 WRITE0[6792] 7B92, 1 bytes: 00 . 588735 READ0[6792] 7B9B, 1 bytes: 00 . 604563 Weather Read request (At Aircrft) to area 4: Lat=49.00, Lon=2.55, Alt=121.0, Req=2 604563 Weather Read request (Nr Station) to area 5: Lat=49.00, Lon=2.55, Alt=0.0, Req=1 606063 System time = 21/05/2016 18:22:15, Simulator time = 14:51:58 (12:51Z) 606063 *** FSUIPC log file being closed Minimum frame rate was 3.5 fps, Maximum was 4.3 fps Minimum available memory recorded was 1669Mb Average frame rate for running time of 244 secs = 3.8 fps G3D fix: Passes 17626, Null pointers 0, Bad pointers 0, Separate instances 0 Maximum AI traffic for session was 87 aircraft Memory managed: 59 Allocs, 59 Freed ********* FSUIPC Log file closed *********** Go to this Topic — The simFlight Network Forums
Pete Dowson Posted May 24, 2016 Report Posted May 24, 2016 Quote I get constantly on my EMAIL MESSAGES always reisener@t-online.de and requests to you from this forum.This since about 2 weeks. Please times for viruses That is not Spam, and it is nothing to do with me. You must have checked the option to follow threads or messages in this forum. You have to stop that yourself, and be more careful what you click on in future! (See top right, above the forum contents, where it says follow or otherwise). Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now