Kevin Oconnor Posted February 26, 2017 Report Posted February 26, 2017 Hi anyone know a quick fix for this fsuipc assigns/controls buttons ok, but no axes, they are recognised but do not move the controls yoke, power quad etc on win 10 64bit with fsx,fsx-se,p3d they all have the same problem including a fresh install of p3d, please let there be a quick fix :), first problem i have ever had with fsuipc,when i uncheck controllers of course there is nix,making do with fsx/p3d controllers which leaves a lot to be desired.Just using the stock baron on p3d FSUIPC4 Install.log FSUIPC4.ini
Pete Dowson Posted February 26, 2017 Report Posted February 26, 2017 3 hours ago, Kevin Oconnor said: first problem i have ever had with fsuipc So, what has changed? Your INI file shows just 4 button assignments, on the Yoke, and only one axis assignment, to the elevator on the X52. You've not provided an FSUIPC4.LOG file showing the actual activity in the Sim and in FSUIPC -- the Install log is completely irrelevant if FSUPC is running and accessible. Also you are still using FSUIPC version 4.962a which was replaced by the supported version, 4.963, a few days ago. Please always check before reporting a problem, just in case. Pete
Kevin Oconnor Posted February 26, 2017 Author Report Posted February 26, 2017 ok upgraded, and will have email the log its too big kept the flight short as well
Kevin Oconnor Posted February 26, 2017 Author Report Posted February 26, 2017 What has changed actually is I have got a throttle quad x2 and an eclipse yoke and a saitek radio panel ,not too sure about the saitek throttles a lot to sort out I am a newbie really and all this talk of GUIDs, offsets etc etc kinda of makes my eyes glaze over ever so slightly
Pete Dowson Posted February 26, 2017 Report Posted February 26, 2017 8 minutes ago, Kevin Oconnor said: will have email the log its too big kept the flight short as well Why is the log too big? Have you enabled logging options without me asking for them? There's no way I want to pore over huge logs! You should easily be able to paste a log here, into a message, not as an attachment. You can use the <> button above the edit area to provide a scrollable section for it. What about my other points, as in what changed, and about the lack of assignments in the first place? Pete
Kevin Oconnor Posted February 26, 2017 Author Report Posted February 26, 2017 Oh Ok i will do that then Pete thanks ********* FSUIPC4, Version 4.963 (23rd February 2017) by Pete Dowson ********* Windows 10 Pro 64 Bit reported as Build 14393, Release ID: 1607 (OS 10.0) Prepar3D.exe version = 3.4.22.19868 Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 10 Module base=197B0000 User Name="KEVIN OCONNOR" User Addr="kevinoconnor1@icloud.com" FSUIPC4 Key is provided WideFS7 Key is provided 16 System time = 26/02/2017 17:56:51 16 FLT UNC path = "\\DESKTOP-7DIUK1V\Users\kevin\Documents\Prepar3D v3 Files\" 16 ------ Module Version Check ------ 16 acontain.dll: 3.4.22.19868 16 api.dll: 3.4.22.19868 16 controls.dll: 3.4.22.19868 16 fs-traffic.dll: 3.4.22.19868 16 G3D.dll: 3.4.22.19868 16 language.dll: 3.4.22.19868 16 sim1.dll: 3.4.22.19868 16 visualfx.dll: 3.4.22.19868 16 weather.dll: 3.4.22.19868 16 window.dll: 3.4.22.19868 16 ---------------------------------- 16 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D3.dll 16 Found it: trying to connect 47 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\" 188 ---------------------- Joystick Device Scan ----------------------- 204 Product= Saitek Pro Flight Quadrant 204 Manufacturer= Saitek 204 Vendor=06A3, Product=0C2D (Version 2.2) 204 Serial Number= 204 Product= Saitek Pro Flight Quadrant 204 Manufacturer= Saitek 204 Vendor=06A3, Product=0C2D (Version 2.2) 204 Serial Number= 204 Product= Saitek X52 Pro Flight Control System 204 Manufacturer= Saitek 204 Vendor=06A3, Product=0762 (Version 1.35) 204 Serial Number= 219 Product= Saitek Pro Flight Rudder Pedals 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0763 (Version 1.0) 219 Serial Number= 219 Product= CH ECLIPSE YOKE 219 Manufacturer= S 219 Vendor=068E, Product=0057 (Version 0.0) 219 Serial Number= 219 ------------------------------------------------------------------- 266 LogOptions=70000000 00000001 266 ------------------------------------------------------------------- 266 ------ Setting the hooks and direct calls into the simulator ------ 266 --- CONTROLS timer memory location obtained ok 266 --- SIM1 Frictions access gained 266 --- FS Controls Table located ok 266 --- Installed Mouse Macro hooks ok. 266 --- Wind smoothing fix is installed 266 --- SimConnect intercept for texts and menus option is off 266 --- All links okay (except older global weather setting method) 266 ------------------------------------------------------------------- 266 SimConnect_Open succeeded: waiting to check version okay 266 Trying to use SimConnect Prepar3D 266 Opened separate AI Traffic client okay 3594 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.22.19868 (SimConnect: 3.4.0.0) 3594 Initialising SimConnect data requests now 3594 FSUIPC Menu entry added 3625 \\DESKTOP-7DIUK1V\Users\kevin\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 3625 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 1226282 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Beech_King_Air_350\Beech_King_Air_350.air 1226297 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW 1226297 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW 1242797 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3909 (0xfffff0bb) AXIS_AILERONS_SET 1242875 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3508 (0xfffff24c) AXIS_AILERONS_SET 1243157 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3502 (0xfffff252) AXIS_AILERONS_SET 1243188 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3503 (0xfffff251) AXIS_AILERONS_SET 1243266 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3504 (0xfffff250) AXIS_AILERONS_SET 1243329 User Aircraft ID 2 supplied, now being used 1243375 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3505 (0xfffff24f) AXIS_AILERONS_SET 1244016 System time = 26/02/2017 18:17:35, Simulator time = 08:00:01 (13:00Z) 1244032 Aircraft="Beech King Air 350 Paint3" 1244094 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3901 (0xfffff0c3) AXIS_AILERONS_SET 1244125 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3500 (0xfffff254) AXIS_AILERONS_SET 1244157 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3501 (0xfffff253) AXIS_AILERONS_SET 1244188 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3502 (0xfffff252) AXIS_AILERONS_SET 1244422 *** AXIS: Cntrl= 66387 (0x00010353), Param= 15413 (0x00003c35) AXIS_LEFT_BRAKE_SET 1244422 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET 1244438 *** TOE BRAKE AXIS, Left set = 194 (IN=15413, OUT=15416) 1244438 *** TOE BRAKE AXIS, Right set = 200 (IN=16383, OUT=16384) 1244438 *** Both toe brakes over threshold: FS BRAKES control sent 1244438 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3507 (0xfffff24d) AXIS_AILERONS_SET 1244438 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 1244438 *** AXIS: Cntrl= 66387 (0x00010353), Param= 15400 (0x00003c28) AXIS_LEFT_BRAKE_SET 1244438 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET 1244938 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3502 (0xfffff252) AXIS_AILERONS_SET 1244969 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3498 (0xfffff256) AXIS_AILERONS_SET 1244985 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3499 (0xfffff255) AXIS_AILERONS_SET 1245016 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3500 (0xfffff254) AXIS_AILERONS_SET 1245047 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3501 (0xfffff253) AXIS_AILERONS_SET 1245079 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3502 (0xfffff252) AXIS_AILERONS_SET 1245110 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3507 (0xfffff24d) AXIS_AILERONS_SET 1245219 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3511 (0xfffff249) AXIS_AILERONS_SET 1245250 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3510 (0xfffff24a) AXIS_AILERONS_SET 1245282 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3509 (0xfffff24b) AXIS_AILERONS_SET 1245313 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3508 (0xfffff24c) AXIS_AILERONS_SET 1245563 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3512 (0xfffff248) AXIS_AILERONS_SET 1245594 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3516 (0xfffff244) AXIS_AILERONS_SET 1245625 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3519 (0xfffff241) AXIS_AILERONS_SET 1245657 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3522 (0xfffff23e) AXIS_AILERONS_SET 1245688 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3524 (0xfffff23c) AXIS_AILERONS_SET 1245704 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3527 (0xfffff239) AXIS_AILERONS_SET 1245735 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3529 (0xfffff237) AXIS_AILERONS_SET 1245766 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3531 (0xfffff235) AXIS_AILERONS_SET 1245797 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3532 (0xfffff234) AXIS_AILERONS_SET 1245829 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3533 (0xfffff233) AXIS_AILERONS_SET 1245860 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3534 (0xfffff232) AXIS_AILERONS_SET 1245875 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3535 (0xfffff231) AXIS_AILERONS_SET 1245907 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3536 (0xfffff230) AXIS_AILERONS_SET 1245938 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3532 (0xfffff234) AXIS_AILERONS_SET 1245969 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3528 (0xfffff238) AXIS_AILERONS_SET 1246000 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3524 (0xfffff23c) AXIS_AILERONS_SET 1246032 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3521 (0xfffff23f) AXIS_AILERONS_SET 1246047 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3519 (0xfffff241) AXIS_AILERONS_SET 1246079 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3517 (0xfffff243) AXIS_AILERONS_SET 1246110 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1246141 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3514 (0xfffff246) AXIS_AILERONS_SET 1246172 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3513 (0xfffff247) AXIS_AILERONS_SET 1246204 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3512 (0xfffff248) AXIS_AILERONS_SET 1246235 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3511 (0xfffff249) AXIS_AILERONS_SET 1246250 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3510 (0xfffff24a) AXIS_AILERONS_SET 1246282 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3509 (0xfffff24b) AXIS_AILERONS_SET 1246313 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3508 (0xfffff24c) AXIS_AILERONS_SET 1246594 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3512 (0xfffff248) AXIS_AILERONS_SET 1246625 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3511 (0xfffff249) AXIS_AILERONS_SET 1246657 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3506 (0xfffff24e) AXIS_AILERONS_SET 1246782 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3511 (0xfffff249) AXIS_AILERONS_SET 1246797 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1246829 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3514 (0xfffff246) AXIS_AILERONS_SET 1246860 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3513 (0xfffff247) AXIS_AILERONS_SET 1246891 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3512 (0xfffff248) AXIS_AILERONS_SET 1246922 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3511 (0xfffff249) AXIS_AILERONS_SET 1246954 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1246969 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3514 (0xfffff246) AXIS_AILERONS_SET 1247000 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3517 (0xfffff243) AXIS_AILERONS_SET 1247032 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1247063 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3514 (0xfffff246) AXIS_AILERONS_SET 1247094 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3513 (0xfffff247) AXIS_AILERONS_SET 1247125 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3517 (0xfffff243) AXIS_AILERONS_SET 1247157 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1247172 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3514 (0xfffff246) AXIS_AILERONS_SET 1247204 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3517 (0xfffff243) AXIS_AILERONS_SET 1247235 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1247266 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3518 (0xfffff242) AXIS_AILERONS_SET 1247297 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3521 (0xfffff23f) AXIS_AILERONS_SET 1247329 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3524 (0xfffff23c) AXIS_AILERONS_SET 1247344 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3527 (0xfffff239) AXIS_AILERONS_SET 1247375 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3529 (0xfffff237) AXIS_AILERONS_SET 1247407 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3526 (0xfffff23a) AXIS_AILERONS_SET 1247438 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3522 (0xfffff23e) AXIS_AILERONS_SET 1247469 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3520 (0xfffff240) AXIS_AILERONS_SET 1247500 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3518 (0xfffff242) AXIS_AILERONS_SET 1247516 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3521 (0xfffff23f) AXIS_AILERONS_SET 1247547 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3524 (0xfffff23c) AXIS_AILERONS_SET 1247579 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3527 (0xfffff239) AXIS_AILERONS_SET 1247610 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3523 (0xfffff23d) AXIS_AILERONS_SET 1247641 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3521 (0xfffff23f) AXIS_AILERONS_SET 1247672 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3519 (0xfffff241) AXIS_AILERONS_SET 1247704 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3517 (0xfffff243) AXIS_AILERONS_SET 1247719 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1247750 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3518 (0xfffff242) AXIS_AILERONS_SET 1247782 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3516 (0xfffff244) AXIS_AILERONS_SET 1247813 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3515 (0xfffff245) AXIS_AILERONS_SET 1247844 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3518 (0xfffff242) AXIS_AILERONS_SET 1247875 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3521 (0xfffff23f) AXIS_AILERONS_SET 1247891 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3524 (0xfffff23c) AXIS_AILERONS_SET 1247922 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3527 (0xfffff239) AXIS_AILERONS_SET
Kevin Oconnor Posted February 26, 2017 Author Report Posted February 26, 2017 Oh basically I stripped them from fsuipc once it would not work ie move the axis controls, so everything is a bit of a mess you must remember to go flying i have controllers enabled, which breaks the golden rule of not having both but at the moment I have to do that., i have reassigned them again do want a log without controllers enabled just fsuipc ,all it will do of course is stay on the runway.
Pete Dowson Posted February 26, 2017 Report Posted February 26, 2017 The reason the log is so big is that you are logging things you don't need to log. just log Axes. The axis log entries shown are ONLY for the Ailerons, and you pretty much either didn't move them or you did and they are not calibrated correctly, because ALL of the values are within a small percentage difference from each other. Just look for yourself! All around -3500 apart from one -3900 for a few milliseconds at the beginning. Such changes won't be noticed at all. I had another quick look at your INI file and it looks like, whilst you enabled calibration, you haven't actually done any calibration at all. The values are all defaults! I also only just noticed -- your only assignment there, to the Elevator,is to just send a fixed value of 0 in an unspecified range. You've messed about i the right-hand part of the Axis assignments tab without completing it, or subsequently deleting lines, and have not actually don'e any proper axis assignments! 1 hour ago, Kevin Oconnor said: Oh basically I stripped them from fsuipc once it would not work ie move the axis controls, so everything is a bit of a mess you must remember to go flying i have controllers enabled, which breaks the golden rule of not having both but at the moment I have to do that., i have reassigned them again do want a log without controllers enabled just fsuipc ,all it will do of course is stay on the runway. Well, I do NOT want to see any logs taken whilst you have controllers enabled in P3D. That just wastes my time. And if you are going to supply logs relating to different INI settings I need to see the INI file used too! I have not seen an INI file with ANY proper axis assignments made at all, yet. Please use the <> button above the editing area here to frame your files when pasted here. Do that with the INI file too please. And you still have not answered my other question: what changed? Are you only just starting to use FSUIPC? You did say "first ever problem" I believe. BUT the first priority is to show me a proper INI file, with your assignments and calibrations, not one like you attached earlier which was just not usable. Pete
Kevin Oconnor Posted February 26, 2017 Author Report Posted February 26, 2017 Ok I will do that thanks probably tomorrow thanks for your help so far I need to learn a lot more about fsuipc, never really had to bother before just installed moved the axis around pick your drop down box entry and that was it ,strange that the buttons work ok, but not the axis will redo it like I had before disable the fsx/p3d bindings and post the log files.
Kevin Oconnor Posted February 28, 2017 Author Report Posted February 28, 2017 Here are the log and ini files Its a lot smaller as I have controllers disabled so as not to get mixed up with p3d,there must be some connection as the button press to go to virtual cockpit works ,set one button to get the throttle at 90% which it did and I raced of helpless across the airport till the crash :), FSUIPC4.ini FSUIPC4.1.log
Kevin Oconnor Posted February 28, 2017 Author Report Posted February 28, 2017 And here is the DLL.xml thing from users appdata roaming p3d <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>CMetroXml</Name> <Disabled>False</Disabled> <Path>.\CMetroXml.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> <Launch.Addon> <Name>as_connect</Name> <Disabled>False</Disabled> <Path>as_srv\as_btstrp.dll</Path> </Launch.Addon> </SimBase.Document>
Pete Dowson Posted February 28, 2017 Report Posted February 28, 2017 Your biggest problem is that you aren't actually assigning any axes in FSUIPC as actual axes. Look: [Axes] PollInterval=10 RangeRepeatRate=10 0=0X,256 1=0X,B,0,0,66420,0 -{ Entering=AXIS_THROTTLE1_SET }- 2=0Y,256 3=0Y,B,0,0,66423,0 -{ Entering=AXIS_THROTTLE2_SET }- 4=0Z,256 5=0Z,B,0,0,66421,0 -{ Entering=AXIS_PROPELLER1_SET }- 7=1Y,B,0,0,65762,0 -{ Entering=AXIS_ELEVATOR_SET }- 9=2X,B,0,0,66424,0 -{ Entering=AXIS_PROPELLER2_SET }- 11=2Y,B,0,0,66422,0 -{ Entering=AXIS_MIXTURE1_SET }- 13=2Z,B,0,0,66425,0 -{ Entering=AXIS_MIXTURE2_SET }- 14=4X,256 15=4X,B,0,0,65763,0 -{ Entering=AXIS_AILERONS_SET }- 16=4Y,1120 17=4Y,B,0,0,65762,0 -{ Entering=AXIS_ELEVATOR_SET }- 19=4Z,B,0,0,66382,0 -{ Entering=AXIS_SPOILER_SET }- Those are all individual little zones, without even the borders correctly defined, using the right-hand side of the Axis Assignments options tab. Why on Earth are you doing this? That area is a specialist place for specific events some folks need to occur on certain parts of a lever movement. All the NORMAL axis assignments are a much simpler process, one or two steps, and done only on the LEFT hand side of that tab. I really don't know how you arrived at doing what you've done. It makes no sense at all, and will never work the way you want. Have you ever any of the FSUIPC documentation? The User guide does have simple instructions, with pictures! You've even set calibrations for just about everything: Aileron=-16380,-512,512,16380 Elevator=-16380,-512,512,16380 Rudder=-16380,-512,512,16380 Throttle=-16380,16380 PropPitch=-16380,16380 Mixture=-16380,16380 LeftBrake=-16380,16380 RightBrake=-16380,16380 Throttle1=-16380,-512,512,16380 Throttle2=-16380,-512,512,16380 Mixture1=0,8192,8192,16380 Mixture2=0,8192,8192,16380 PropPitch1=0,0,512,16380 PropPitch2=0,0,512,16380 ElevatorTrim=-16380,-512,512,16380 Spoilers=-16380,16380 Flaps=0,16380 Reverser=-16380,16380 Aileron Trim=-16380,-512,512,16380 Rudder Trim=-16380,-512,512,16380 CowlFlaps1=0,16380 CowlFlaps2=0,16380 PanHeading=-16380,-512,512,16380 PanPitch=-16380,-512,512,16380 PanTilt=-16380,-512,512,16380 SteeringTiller=-16380,-512,512,16380 SlewAlt=-16380,-512,512,16380 SlewSide=-16380,-512,512,16380 SlewAhead=-16380,-512,512,16380 SlewHeading=-16380,-512,512,16380 Reverser1=-16380,16380 Reverser2=-16380,16380 even though those won't be used at all. And none of them are actually calibrated anyway -- all those are default values, set by simply pressing the "SET" buttons and then not actually doing the calibration. Again, there are step by step instructions doing the calibration in the User Guide. You are hardly making any use of anything else in FSUIPC -- hardly any buttons assigned, and one keypress. Why did you get FSUIPC? I can answer specific questions if you are puzzled by it all, but please do try to read and follow the instructions. Then delete the INI file and start again. Pete
Kevin Oconnor Posted March 1, 2017 Author Report Posted March 1, 2017 Problem solved thanks what a hoot I was using the right side not left side did not realise they had dropdown choices on the left,silly me, need to read the manual thanks over and out, playing around with calibration now
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now