Non-stop panel opening/closing

[Masterius]

I was trying to determine codes for selecting radio channels (ex. toggling between NAV1 and NAV2) so I decided to use event logging. Here is just an example of what is being logged:

76921269 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921269 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN
 76921332 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921332 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN
 76921394 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921394 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN
 76921457 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921457 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN
 76921457 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921457 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN
 76921519 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921519 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN
 76921566 *** EVENT: Cntrl= 66508 (0x000103cc), Param= 102 (0x00000066) PANEL_ID_CLOSE
 76921566 *** EVENT: Cntrl= 66507 (0x000103cb), Param= 100 (0x00000064) PANEL_ID_OPEN

This goes on non-stop, and I've no idea what's driving it. I have registered FSUIPC, using FSX-SE, and the add-on aircraft Accu-Sim B-17G Flying Fortress, with quite a few macros and several LUAs, but I can't see anything out of the ordinary, or looking suspicious. I've tried several other, standard aircraft, and it doesn't seem to happen with them.

~Masterius

Edited July 21, 2019 by Masterius

[John Dowson]

Hi Masterius,

they will be used (ie re-purposed for internal use) by your add-on aircraft or Accu-Sim - I also get them  with A2A's Cherokee (with Accu-Sim).  Just ignore them.

You can add the following to the '[General]' section your FSUIPC4.ini file so that these are ignored:

DontLogThese=66507,66508

John

 

 

[Masterius]

Thank you for responding so quickly! I was worried more about that being a potential resource hog than I was it "flooding" the event log. (Hey! That rhymed! 😁) Even so, it's nice to be shown a method to block that from being logged.

Thanks again!