Jim Supersym Posted September 30, 2022 Report Posted September 30, 2022 Hi ! Since e few update of MSFS and FSUIPC I can't anymore get the FFB's axis in FSUIPC and can't calibrate them. Have you a idea ? Thanks
John Dowson Posted September 30, 2022 Report Posted September 30, 2022 Since the release of SU10 / SDK 0.9.3.0, there are issues with masking events for calibration purposes. I am still investigating these issues and will file a bug report with Asobo, but for the time being I have had to remove the ability to calibrate an axis if not assigned with 'Send direct to FSUIPC Calibration'. Therefore if you want to use FSUIPC's calibration facilities, you must assign in this manner. Note you can still scale (and reverse) an axis assigned with 'Send to FS as normal axis', but such assigned axis will no longer be calibrated by FSUIPC. John
Jim Supersym Posted September 30, 2022 Author Report Posted September 30, 2022 Thanks for your quick answer. But It's not only with calibration : I can see the axis move in the FSUIPC's axis tab with my HOTAS yoke, but not with the FFB yoke Flight illusion. The FFB yoke works in the planes, (C172 PMDG 737...) the only problem is that it's shaking with the 737 and I can't use the PA 😔 I wanted to get more important deadzone...
John Dowson Posted September 30, 2022 Report Posted September 30, 2022 3 hours ago, Jim Supersym said: I can see the axis move in the FSUIPC's axis tab with my HOTAS yoke, but not with the FFB yoke And you could see the FFB yoke axis in FSUIPC previously? There really should be no change in controller/axes recognition as nothing has changed in this area - FSUIPC reads hardware devices directly and not via the sim. So I think something else must be going on. Can you show me/attach your FSUIPC7.ini and FSUIPC7.log files please. John
Jim Supersym Posted September 30, 2022 Author Report Posted September 30, 2022 yes I could. I will send you this 2 files. thanks
John Dowson Posted October 1, 2022 Report Posted October 1, 2022 Your log and ini files show that you have never had the FFB yoke assigned in FSUIPC, so your issue is not related to an MSFS or FSUIPC update - unless you had previously assigned in MSFS and calibrated in FSUIPC7 (which is no longer possible at the moment). You do have one controller assigned that is now missing: Quote A=TPR T.Pendular Rudder << MISSING JOYSTICK >> Your FFB yoke is not supported by FSUIPC, you will have to assign in the sim. Previously it was also possible to calibrate in FSUIPC7 when assigned in the sim, but since SU10 this is no longer possible, sorry. John
Jim Supersym Posted October 3, 2022 Author Report Posted October 3, 2022 No tit's not the pendullar. This one was'nt connected. It's the FFB yoke from Flight illusion : this one : https://www.flightillusion.com/controls/ffb-yokes/hw-ffb-csn/
John Dowson Posted October 3, 2022 Report Posted October 3, 2022 4 minutes ago, Jim Supersym said: No tit's not the pendullar. This one was'nt connected. Yes I know, that is what I said ('You do have one controller assigned that is now missing:'). 5 minutes ago, Jim Supersym said: t's the FFB yoke from Flight illusion : this one : https://www.flightillusion.com/controls/ffb-yokes/hw-ffb-csn/ Yes, I know, This yoke is not recognised or supported by FSUIPC. It is not an HID joystick type device. John
Jim Supersym Posted October 3, 2022 Author Report Posted October 3, 2022 But it was working in FSUIPC 6... I'm lost 😪
John Dowson Posted October 3, 2022 Report Posted October 3, 2022 Just now, Jim Supersym said: But it was working in FSUIPC 6... Are you sure? The yoke isn't even recognised, and this will/should be the same in FSUIPC6... Maybe show me your FSUIPC6.log and FSUIPC6.ini files so that I can check...
Jim Supersym Posted October 3, 2022 Author Report Posted October 3, 2022 Yes I will... In fsuipc 6 I can calibrate the yoke. Not in 7, but in 7, in MSFS, the yoke works, but it don't appear in the configuration TAB of MSFS
John Dowson Posted October 3, 2022 Report Posted October 3, 2022 15 minutes ago, Jim Supersym said: In fsuipc 6 I can calibrate the yoke. Not in 7 But how is the yoke assigned in P3Dv5/FSUIPC6? Presumably in P3D, no? As I have said, it was previously possible to calibrate axes when assigned in MSFS or when assigned in FSUIPC to 'Send to FS as normal axis', but since the release of SU10 this is no longer possible. With P3D/FSUIPC6, this is still possible. John
John Dowson Posted October 3, 2022 Report Posted October 3, 2022 Just now, Jim Supersym said: no, it was in fsuipc 6 Files?
Jim Supersym Posted October 3, 2022 Author Report Posted October 3, 2022 I've the answer from FI : app arently its normal... I've to calibrate with the owner driver of the yoke... Sorry for all those inconveniences
John Dowson Posted October 3, 2022 Report Posted October 3, 2022 47 minutes ago, Jim Supersym said: I've the answer from FI : app arently its normal... I've to calibrate with the owner driver of the yoke... Ok, that makes sense. Thanks for the update. John
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now