pmdg 737 fuel cutoff levers are not recoginzed after different software installation(different company product for msfs2020 b737)

[Song]

 John,

I downloaded another program for EFIS CONTROL PANEL (different company product) after that, 737 fuel cutoff lever is not working. 

 

so , i uninstalled the FSUIPC7 program, and installed again.

But still fuel cutoff lever is not recognized on BUTTON AND SW Assignmens.

i moved fuel cutoff lever several times, but FSUIPC7 BUTTON AND SW Assignmens does respond. so i can't use the fuel cutoff lever on msfs2020.

How can i fix this problem. 

 

For your informaiton, FSUIPC7 Message is 

"Welcome to FSUIPC
1944 Lvars loaded, 0 hvars loaded, 10888 presets available"

 

please let me know. 

 

 

[John Dowson]

What device is this lever/button/switch attached to? Are any buttons/switches/axes on this device recognised?

As I have already said (when you asked this question in another post), please attach your FSUIPC7.log and FSUIPC7.ini files.

On 6/17/2023 at 11:58 PM, Song said:

so , i uninstalled the FSUIPC7 program, and installed again.

Why? If installing the Efis Control panel software caused this issue, why not try uninstalling that first to see if that solves the issue....

[Song]

john, 

 

i tested FSUIPC7 today again and other buttons are recognized very well such as light test button. 

only 737 fuel cutoff lever is not recoginzed. 

 

when i first installed FSUIPC7 program and connected the 737 fuel cutoff lever, 737 fuel cutoff lever is recognized very well. 

but now it doesn't.

 

And EFIS CONTROL PANEL (different company product) problem has been solved and i think it doesn't affect FSUIPC7  737 fuel cutoff lever.

 

HOW CAN I ATTACH THE FSUIPC7.log and FSUIPC7.ini files.

I don't know. please explain. 

 

 

 

 

 

[John Dowson]

10 hours ago, Song said:

HOW CAN I ATTACH THE FSUIPC7.log and FSUIPC7.ini files.

By dragging them and dropping them to the bottom of the field where you enter comments, where it says 'Drag files here to attach...' or use the choose files link in the same place.....

But if you are moving the lever and it is not recognised, then I doubt there is much I can do. Is it recognised by MSFS?

[Song]

where is the  FSUIPC7.log and FSUIPC7.ini files? where is the  files link in the same place?

If the below is the log, please see. 

And it is not recoginzed by  MSFS. BUT when i first connected, it was working without problem. 

 

Console Started ...

********* FSUIPC7, Version 7.3.21 (9th June 2023) by John Dowson *********
Steam installation detected: Checking for FS path in 'C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\UserCfg.opt'
FS path found = C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\Packages\
WebSocket server found: C:\FSUIPC7\\Utils\FSUIPCWebSocketServer.exe
Windows 10 Pro 64 Bit reported as Build 19045, Release ID: 2009 (OS 10.0)
Reading options from "C:\FSUIPC7\FSUIPC7.ini"
Checking the Registrations now ...
User Name="HWAN_MOON SONG"
User Addr="mrsonghm@naver.com"
FSUIPC7 Key is provided
WIDEFS7 not user registered, or expired
      172 System time = 23/06/2023 05:38:49
      172 FLT path = "C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\"
      172 Allowing calibration when not assigned with 'Send direct to FSUIPC Calibration'
      297 -------------------------------------------------------------------
      328 Preset file 'C:\FSUIPC7\myevents.txt' not found [info only]
      328 10888 Calculator Code presets have been loaded and are available for use
      375 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1)
      390 FS path = "C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\Packages\"
      406 ---------------------- Joystick Device Scan -----------------------
      422 Product= Logitech Extreme 3D
      422    Manufacturer= Logitech
      422    Vendor=046D, Product=C215 (Version 2.4)
      437    GUIDs returned for product: VID_046D&PID_C215:
      437       GUID= {A84B4240-B45F-11EC-8002-444553540000}
      437       Details: Btns=12, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U0,V0,X1023,Y1023,Z255
      437 Product= T-Rudder
      437    Manufacturer= Thrustmaster
      437    Serial Number= 00000000001A
      453    Vendor=044F, Product=B679 (Version 1.16)
      453    GUIDs returned for product: VID_044F&PID_B679:
      453       GUID= {CF44DD30-846A-11ED-8001-444553540000}
      453       Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X1023,Y1023,Z1023
      453 Product= TCA YOKE BOEING
      453    Manufacturer= Thrustmaster
      453    Serial Number= 207332645231
      469    Vendor=044F, Product=0409 (Version 2.0)
      469    GUIDs returned for product: VID_044F&PID_0409:
      469       GUID= {FB939EA0-D4B8-11ED-8001-444553540000}
      469       Details: Btns=18, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R65535,U65535,V65535,X65535,Y65535,Z65535
      469 Product= Bravo Throttle Quadrant
      484    Manufacturer= Honeycomb Aeronautical
      484    Serial Number= 5A652F18131D3B00
      484    Vendor=294B, Product=1901 (Version 1.7)
      484    GUIDs returned for product: VID_294B&PID_1901:
      484       GUID= {E937C900-D3FC-11ED-8002-444553540000}
      500       Details: Btns=48, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R1023,U1023,V1023,X1023,Y1023,Z1023
      500 -------------------------------------------------------------------
      531 Device acquired for use:
      531    Joystick ID = 0 (Registry okay)
      531    0=Logitech Extreme 3D
      531    0.GUID={A84B4240-B45F-11EC-8002-444553540000}
      531 Device acquired for use:
      531    Joystick ID = 1 (Registry okay)
      531    1=T-Rudder
      531    1.GUID={CF44DD30-846A-11ED-8001-444553540000}
      547 Device acquired for use:
      547    Joystick ID = 3 (Registry okay)
      547    3=TCA YOKE BOEING
      547    3.GUID={FB939EA0-D4B8-11ED-8001-444553540000}
      547 Device acquired for use:
      547    Joystick ID = 2 (Registry okay)
      547    2=Bravo Throttle Quadrant
      547    2.GUID={E937C900-D3FC-11ED-8002-444553540000}
      547 -------------------------------------------------------------------
      609 LogOptions=E0000000 00000001
     3359 Simulator detected
    33359 **** SimConnect open event not received in required time limit: Re-connecting now...
    58578 **** SimConnect open event not received in required time limit: Re-connecting now...
    83797 **** SimConnect open event not received in required time limit: Re-connecting now...
   109000 **** SimConnect open event not received in required time limit: Re-connecting now...
   119812 SimConnect_Open succeeded
   119828 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3)
   119828 MSFS version = 11.0.282174.999
   119828 Initialising SimConnect data requests now
   119828 Offset file 'C:\FSUIPC7\myOffsets.txt' not found (info only)
   119844 Mapping custom control numbers 69632 - 84232
   119844 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents)
   120000 Button changed: bRef=0, Joy=2 (C), Btn=139, Pressed
   120000 [Buttons] 13=PC,139,CPPMDG_B737_Eng_1_Ovht_Det_A,0
   120000 Executing preset 'PMDG_B737_Eng_1_Ovht_Det_A' [9864]
   120000  [ERROR]: Error setting Client Data Calculator Code: '0 (L:switch_694_73X,number) - 50 div s0 :1 l0 0 > if{ 69402 (>K:ROTOR_BRAKE) l0 -- s0 g1 } l0 0 < if{ 69401 (>K:ROTOR_BRAKE) l0 ++ s0 g1 }'
   125031 User Aircraft ID not supplied -- trying default

 

[John Dowson]

8 hours ago, Song said:

where is the  FSUIPC7.log and FSUIPC7.ini files? 

In your FSUIPC7 installation folder.

8 hours ago, Song said:

If the below is the log, please see. 

That is a partial log, pasted from the console window, and shows that FSYUPC recognised 4 devices:
    Logitech Extreme 3D
    T-Rudder
    Bravo Throttle Quadrant
    TCA YOKE BOEING
Which device are you using for the fuel cut-off lever?

8 hours ago, Song said:

And it is not recoginzed by  MSFS. BUT when i first connected, it was working without problem. 

This  does sound like the lever isn't working. Can you see it in the windows game controller config?

 

[Song]

There are 5 FSUIPC7 logs in the FSUIPC7 folder. which one do i have to send you?

1. FSUIPC7.1.log

2. FSUIPC7.log

3. FSUIPC7_prev.log

4. InstallFSUIPC7.log

5. UninstallFSUIPC7.log

 

 Logitech Extreme 3D,  T-Rudder,   Bravo Throttle Quadrant are TCA YOKE BOEING are not for the  fuel cut-off lever.

I bought the fuel cut-off lever product from https://www.etsy.com/ web site. 

 

the fuel cut-off lever is not being shown from fsms2020 controls option. but  Logitech Extreme 3D,  T-Rudder,   Bravo Throttle Quadrant and TCA YOKE BOEING are being shown in fsms2020 controls option.

[John Dowson]

Always post FSUIPC7.log files. FSUIPC7_prev.log is the log file from the previous run, ie. when you start FSUIPC7, if there is already a log file this is renamed to FSUIPC7_prev.log and a new FSUIPC7.log file is created/started for the current run. Log files with additional numbers (e.g. FSUIPC7.1.log) are continuation log files, and are there because you have started a new log by selecting the File -> New Log menu entry. Do not use that when generating log files for support issues as I always need to see full/complete log files.

On 6/23/2023 at 4:15 PM, Song said:

Logitech Extreme 3D,  T-Rudder,   Bravo Throttle Quadrant are TCA YOKE BOEING are not for the  fuel cut-off lever.

I bought the fuel cut-off lever product from https://www.etsy.com/ web site. 

Ok, so it is a separate device, and this is no longer recognised. No point sending the log file at the moment then, but I need to see your FSUIPC7.ini and FSUIPC7.JoyScan.csv files.

[Song]

Below is the FSUIPC7.log files after start of FSUIPC7 for msfs2020.

please see.

********* FSUIPC7, Version 7.3.21 (9th June 2023) by John Dowson *********
Steam installation detected: Checking for FS path in 'C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\UserCfg.opt'
FS path found = C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\Packages\
WebSocket server found: C:\FSUIPC7\\Utils\FSUIPCWebSocketServer.exe
Windows 10 Pro 64 Bit reported as Build 19045, Release ID: 2009 (OS 10.0)
Reading options from "C:\FSUIPC7\FSUIPC7.ini"
Checking the Registrations now ...
User Name="HWAN_MOON SONG"
User Addr="mrsonghm@naver.com"
FSUIPC7 Key is provided
WIDEFS7 not user registered, or expired
      172 System time = 27/06/2023 05:10:39
      172 FLT path = "C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\"
      172 Allowing calibration when not assigned with 'Send direct to FSUIPC Calibration'
      328 -------------------------------------------------------------------
      344 Preset file 'C:\FSUIPC7\myevents.txt' not found [info only]
      344 10888 Calculator Code presets have been loaded and are available for use
      406 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1)
      437 FS path = "C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\Packages\"
      453 ---------------------- Joystick Device Scan -----------------------
      469 Product= Logitech Extreme 3D
      469    Manufacturer= Logitech
      469    Vendor=046D, Product=C215 (Version 2.4)
      484    GUIDs returned for product: VID_046D&PID_C215:
      500       GUID= {A84B4240-B45F-11EC-8002-444553540000}
      500       Details: Btns=12, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U0,V0,X1023,Y1023,Z255
      500 Product= T-Rudder
      500    Manufacturer= Thrustmaster
      500    Serial Number= 00000000001A
      500    Vendor=044F, Product=B679 (Version 1.16)
      500    GUIDs returned for product: VID_044F&PID_B679:
      500       GUID= {CF44DD30-846A-11ED-8001-444553540000}
      516       Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X1023,Y1023,Z1023
      516 Product= TCA YOKE BOEING
      516    Manufacturer= Thrustmaster
      516    Serial Number= 207332645231
      516    Vendor=044F, Product=0409 (Version 2.0)
      516    GUIDs returned for product: VID_044F&PID_0409:
      516       GUID= {FB939EA0-D4B8-11ED-8001-444553540000}
      516       Details: Btns=18, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R65535,U65535,V65535,X65535,Y65535,Z65535
      531 Product= Bravo Throttle Quadrant
      547    Manufacturer= Honeycomb Aeronautical
      547    Serial Number= 5A652F18131D3B00
      547    Vendor=294B, Product=1901 (Version 1.7)
      547    GUIDs returned for product: VID_294B&PID_1901:
      547       GUID= {E937C900-D3FC-11ED-8002-444553540000}
      547       Details: Btns=48, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R1023,U1023,V1023,X1023,Y1023,Z1023
      562 -------------------------------------------------------------------
      594 Device acquired for use:
      594    Joystick ID = 0 (Registry okay)
      594    0=Logitech Extreme 3D
      594    0.GUID={A84B4240-B45F-11EC-8002-444553540000}
      594 Device acquired for use:
      594    Joystick ID = 1 (Registry okay)
      594    1=T-Rudder
      594    1.GUID={CF44DD30-846A-11ED-8001-444553540000}
      609 Device acquired for use:
      609    Joystick ID = 3 (Registry okay)
      609    3=TCA YOKE BOEING
      609    3.GUID={FB939EA0-D4B8-11ED-8001-444553540000}
      609 Device acquired for use:
      609    Joystick ID = 2 (Registry okay)
      609    2=Bravo Throttle Quadrant
      625    2.GUID={E937C900-D3FC-11ED-8002-444553540000}
      625 -------------------------------------------------------------------
      687 LogOptions=E0000000 00000001
     3406 Simulator detected
    15078 SimConnect_Open succeeded
    15078 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3)
    15078 MSFS version = 11.0.282174.999
    15094 Initialising SimConnect data requests now
    15094 Offset file 'C:\FSUIPC7\myOffsets.txt' not found (info only)
    15094 Mapping custom control numbers 69632 - 84232
    15094 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents)
    15109 Button changed: bRef=0, Joy=2 (C), Btn=139, Pressed
    15109 [Buttons] 13=PC,139,CPPMDG_B737_Eng_1_Ovht_Det_A,0
    15109 Executing preset 'PMDG_B737_Eng_1_Ovht_Det_A' [9864]
    15109  [ERROR]: Error setting Client Data Calculator Code: '0 (L:switch_694_73X,number) - 50 div s0 :1 l0 0 > if{ 69402 (>K:ROTOR_BRAKE) l0 -- s0 g1 } l0 0 < if{ 69401 (>K:ROTOR_BRAKE) l0 ++ s0 g1 }'
    20359 User Aircraft ID not supplied -- trying default
    48594 C:\Users\aa\AppData\Roaming\Microsoft Flight Simulator\Packages\Community\pmdg-aircraft-738\SimObjects\Airplanes\PMDG 737-800\aircraft.CFG
    48594 PMDG 737 offsets enabled
    49734 Aircraft loaded: running normally now ...
    50453 System time = 27/06/2023 05:11:29, Simulator time = 19:11:28 (20:11Z)
    50469 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents)
    50469 Aircraft="PMDG 737-800 PMDG House (N738BW | 2022)"
 

 

[John Dowson]

12 hours ago, Song said:

Below is the FSUIPC7.log files after start of FSUIPC7 for msfs2020.

But why are you pasting the contents of that file. As I said:

On 6/26/2023 at 10:34 AM, John Dowson said:

No point sending the log file at the moment then, but I need to see your FSUIPC7.ini and FSUIPC7.JoyScan.csv files.

Please read my comments if you want assistance.

Also, please attach files rather than pasting their contents.

[Song]

Can you remote control for me.

i can't understan what you said. 

i am not good at the computer. 

 

 

[John Dowson]

Just now, Song said:

Can you remote control for me.

No.

1 minute ago, Song said:

i can't understan what you said. 

I just want to see (i.e. attach them to a comment posted in this topic) your FSUIPC7.ini and FSUIPC7.JoyScan.csv files, both of which are located in your FSUIPC7 installation folder, in the same location as your FSUIPC7.log file.

If you cannot see these files, see the addendum Identifying Files in Windows Explorer on the last page of the Installing and Registering FSUIPC7 document/pdf.
 

And I would like to know what device you are using for the cut-off levers. You previously posted a link to Etsy, which is of no use. Please paste a link to the actual controller.

6 minutes ago, Song said:

i am not good at the computer. 

I am only asking you to show me some files on your system (which are easy to find...) and provide information on your controller. This is not difficult, regardless of your computer experience...

John