skipjack Posted January 1 Report Posted January 1 Good Morning, The previous assignments in FSUIPC do not show up anymore. I'm using CH Eclipse controller. I don't think FSUIPC recognizes my controller. Attached are the INI and log files. I calculated my controller, tried other planes, downloaded the latest version of MSFS and this I think is when the trouble started. FSUIPC7.log FSUIPC7.ini
John Dowson Posted January 2 Report Posted January 2 Looks like a registry problem where your device name/guid changed... I have corrected this in the attached file, if you could try with this. There looks to be an issue with your CH Pro pedals as well, but you don't seem to have any assignments to this. Is this working? You may need to clean the registry details for this if you want to assign in FSUIPC. John FSUIPC7.ini
skipjack Posted January 2 Author Report Posted January 2 Thank you, John, The download ini file helped. The Ch pedals work fine. The only problem is none of the aircraft assignments show up in FSUIPC for any aircraft. I attached the new ini and log fife. Thank You, Rich FSUIPC7.log FSUIPC7.ini
John Dowson Posted January 2 Report Posted January 2 21 minutes ago, skipjack said: The download ini file helped How did it help? You seem to be having the same issue.... It seems the name of your devices is now missing from the registry. I have edited your ini again to use a blank name - see if this works. If not, you will need to clean your registry. Please don't add any new assignments until this issue is resolved. I have removed the ones you added to the yoke when it was assigned the joyletter C, as these are duplicates of assignments made when it had the letter B. FSUIPC7.ini
skipjack Posted January 2 Author Report Posted January 2 John, That solved the problem, The joyletter is now B and all assignments are available. How did this happen and is there anything I can do if it occurs again. John thank you all your assistance.
John Dowson Posted January 3 Report Posted January 3 12 hours ago, skipjack said: How did this happen and is there anything I can do if it occurs again. The problem seems to be with the name of your controllers in the windows registry - sometimes it reports a device name and sometimes it is empty. You need to correct for this (when it changes) in the [JoyNames] section of your FSUIPC7.ini file.
skipjack Posted January 3 Author Report Posted January 3 John, just one more question. Where in the registry should I look for the change? Thank you
John Dowson Posted January 3 Report Posted January 3 Just now, skipjack said: Where in the registry should I look for the change? Details will be in the FSUIPC7.JoyScan.csv file. If you attach that I can provide aa script to remove the entries, and you can see if they are registered correctly when re-attached.
John Dowson Posted January 3 Report Posted January 3 Have you installed any specific drivers for your yoke? I ask as both hid and registry scanning are reporting the device twice (i.e. same GUID) but with different vendor (VID) and product (PID) ids: Quote ,,,,,,,,,,,, ,,, HIDscanning completed,,,,,,,,, ,,,,,,,,,,,, N, x00, x068E, xC051, ,-1,-1,0, {NULL}, {NULL}, {D60B49D0-B207-11E9-8001-444553540000}, Y, N N, x00, x068E, xC0F2, ,-1,-1,0, {NULL}, {NULL}, {079F94B0-46D4-11E8-8003-444553540000}, Y, N N, x00, x28DE, x11FF, ,-1,-1,0, {NULL}, {NULL}, {D60B49D0-B207-11E9-8001-444553540000}, Y, N ,,,,,,,,,,,, ,,, REGscanning completed,,,,,,,,, ,,,,,,,,,,,, N, x00, x068E, xC051, CH Eclipse Yoke USB,-1,1,0, {NULL}, {D60B49D0-B207-11E9-8001-444553540000}, {D60B49D0-B207-11E9-8001-444553540000}, Y, Y N, x00, x068E, xC0F2, CH Pro Pedals USB,-1,0,0, {NULL}, {079F94B0-46D4-11E8-8003-444553540000}, {079F94B0-46D4-11E8-8003-444553540000}, Y, Y N, x00, x28DE, x11FF, ,-1,1,0, {NULL}, {D60B49D0-B207-11E9-8001-444553540000}, {D60B49D0-B207-11E9-8001-444553540000}, Y, Y We can remove these entries and try again, but you will probably get the same result. If you have installed any specific drivers for your yoke and/or pedals, best to remove those drivers and let windows install/use the default windows drivers. Once removed, unplug your devices, reboot. Once done, run FSUIPC7 (not MSFS!) - just run then exit, and show me the 3 update files again - .log, .ini and .JoyScan.csv
skipjack Posted January 3 Author Report Posted January 3 John I'm a bit confused as to the sequence. 1. I Removed ch drivers for both controller and pedal 2. disconnected both usb connections 3. turned off computer 4.Now do I reboot without connecting the controller and pedal usb's and run fsuipc7 and exit and show you the 3 fles OR connect the 2 usb then reboot and run fsuipc7 and show you the 3 files
skipjack Posted January 3 Author Report Posted January 3 Members 24 Locationlong Island, NY Author Posted just now John I'm a bit confused as to the sequence. 1. I Removed ch drivers for both controller and pedal 2. disconnected both usb connections 3. turned off computer 4.Now do I reboot without connecting the controller and pedal usb's and run fsuipc7 and exit and show you the 3 fles OR connect the 2 usb then reboot and run fsuipc7 and show you the 3 files
skipjack Posted January 3 Author Report Posted January 3 FSUIPC7 - Copy.ini FSUIPC7 - Copy.log FSUIPC7.JoyScan - Copy.csv
skipjack Posted January 3 Author Report Posted January 3 1 hour ago, skipjack said: Members 24 Locationlong Island, NY Author Posted just now John I'm a bit confused as to the sequence. 1. I Removed ch drivers for both controller and pedal 2. disconnected both usb connections 3. turned off computer 4.Now do I reboot without connecting the controller and pedal usb's and run fsuipc7 and exit and show you the 3 fles OR connect the 2 usb then reboot and run fsuipc7 and show you the 3 files I just sent you 3 files without controller and pedals connected
skipjack Posted January 3 Author Report Posted January 3 the three "copy" file above are without the CH products connected
John Dowson Posted January 4 Report Posted January 4 10 hours ago, skipjack said: the three "copy" file above are without the CH products connected I need to see the files with the devices connected.... However, it is interesting that the phantom controller is still recognised: Quote ,,, HIDscanning completed N, x00, x28DE, x11FF, , -1, -1, 0, {NULL}, {NULL}, {NULL}, N, N ,,, REGscanning completed N, x00, x28DE, x11FF, , -1, -1, 0, {NULL}, {NULL}, {NULL}, N, N This in the entry causing issues as it gets assigned the same GUID as your yoke (see my previous comment). You can try running the attached regedit file to remove this - just download and double-click it to execute. Once done, connect your devices, run FSUIPC7, exit, and then show me those files again. John removeDevices.reg
skipjack Posted January 4 Author Report Posted January 4 Good Morning John, I downloaded and ran the above file. Attached are the 3 files after running FSUIPC7.exe. Thank you for your continuing help FSUIPC7.JoyScan - Copy.csv FSUIPC7 - Copy.ini FSUIPC7 - Copy.log
John Dowson Posted January 4 Report Posted January 4 Thanks - all looks good now. Use the attached ini file and you should be ok. FSUIPC7.ini John
skipjack Posted January 4 Author Report Posted January 4 Hi John, After downloading the above .ini file the joystick wasn't working correctly so I downloaded ch control manager to calibrate the joy stick, then when I went back into the game FSUIPC7 came up with "D" and no inputs. So I changed .ini to the one you had made with "B=" blank and now all seem to work I attached the 3 current files FSUIPC7.JoyScan - Copy.csv FSUIPC7 - Copy.ini FSUIPC7 - Copy.log
John Dowson Posted January 5 Report Posted January 5 13 hours ago, skipjack said: After downloading the above .ini file the joystick wasn't working correctly What do you mean by this? 13 hours ago, skipjack said: I downloaded ch control manager to calibrate the joy stick, So it looks like this is the software that is screwing up the registry, as that phantom device with no name but the same GUID as your yoke is now showing again. 13 hours ago, skipjack said: So I changed .ini to the one you had made with "B=" blank and now all seem to work I attached the 3 current files I am surprised it works with those files, as your B device is missing... You have two options. If its working, just leave it as is. Otherwise, you need to go through the whole procedure again (as we are back at the beginning), and then figure out why your 'joystick wasn't working correctly'. Maybe it needs calibration in the windows game controller panels. John
skipjack Posted January 7 Author Report Posted January 7 Hi John, attached are the 3 files that seem to work all the time. FSUIPC7.log FSUIPC7.ini FSUIPC7.JoyScan.csv
John Dowson Posted January 8 Report Posted January 8 Not sure why you are attaching files....as I said, you are just back to the previous situation where it is working but with no name for your yoke. I have nothing further to add to this that i have not already said: On 1/5/2024 at 9:50 AM, John Dowson said: You have two options. If its working, just leave it as is. Otherwise, you need to go through the whole procedure again (as we are back at the beginning), and then figure out why your 'joystick wasn't working correctly'. Maybe it needs calibration in the windows game controller panels.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now