aeloyq Posted July 1 Report Share Posted July 1 (edited) Hello FSUIPC Community, I hope this message finds everyone well. I am writing to discuss an issue I've encountered with the recent release of the PMDG 77W for Microsoft Flight Simulator (MSFS). Along with its release, the pmdg 77w SDK was also made available with the first update. However, I've noticed some discrepancies that are causing challenges in data integration using SimConnect and FSUIPC. Specifically, the DATA_NAME, DATA_ID, and DATA_DEFINITION (used for SimConnect_RequestClientData) differ significantly from those used in the 737 (NG3). As a result, the offsets (0x6420 - 0x66C0) that were previously usable for PMDG NG3 aircraft are now incompatible with the PMDG 77W. This incompatibility is affecting my ability to properly integrate and retrieve data from the new aircraft model. Given these changes, I would like to inquire if there are any plans to update the offsets for the PMDG 77W in the upcoming updates? Additionally, I am keen to know if there is a way I can contribute to this update process. I am willing to assist in any capacity to ensure that we can have a seamless experience with the new PMDG 77W in MSFS. Any guidance or suggestions from the community or the developers would be greatly appreciated. Thank you in advance for your assistance and support. #ifndef PMDG_777X_SDK_H #define PMDG_777X_SDK_H // SimConnect data area definitions #define PMDG_777X_DATA_NAME "PMDG_777X_Data" #define PMDG_777X_DATA_ID 0x504D4447 #define PMDG_777X_DATA_DEFINITION 0x504D4448 #define PMDG_777X_CONTROL_NAME "PMDG_777X_Control" #define PMDG_777X_CONTROL_ID 0x504D4449 #define PMDG_777X_CONTROL_DEFINITION 0x504D444A #define PMDG_777X_CDU_0_NAME "PMDG_777X_CDU_0" #define PMDG_777X_CDU_1_NAME "PMDG_777X_CDU_1" #define PMDG_777X_CDU_2_NAME "PMDG_777X_CDU_2" #define PMDG_777X_CDU_0_ID 0x4E477835 #define PMDG_777X_CDU_1_ID 0x4E477836 #define PMDG_777X_CDU_2_ID 0x4E477837 #define PMDG_777X_CDU_0_DEFINITION 0x4E477838 #define PMDG_777X_CDU_1_DEFINITION 0x4E477839 #define PMDG_777X_CDU_2_DEFINITION 0x4E47783A Edited July 1 by aeloyq Link to comment Share on other sites More sharing options...
John Dowson Posted July 1 Report Share Posted July 1 I am currently looking into adding/re-activating the PMDG 777 specific offsets. They will be available in the next release of FSUIPC7, which I am currently planning on releasing towards the end of the week. John 1 Link to comment Share on other sites More sharing options...
John Dowson Posted July 1 Report Share Posted July 1 I have released a beta version of the next release with the PMDG 777 offsets enabled if you could try it: John Link to comment Share on other sites More sharing options...
PriZeFighter13 Posted August 29 Report Share Posted August 29 Can you post a list of the 777 offsets? Link to comment Share on other sites More sharing options...
John Dowson Posted August 29 Report Share Posted August 29 14 hours ago, PriZeFighter13 said: Can you post a list of the 777 offsets? They are in the Offset Mapping for PMDG 777 document which should be in your FSUIPC7 documents folder, and is attached below. John Offset Mapping for PMDG 777.pdf Link to comment Share on other sites More sharing options...
PriZeFighter13 Posted August 29 Report Share Posted August 29 9 hours ago, John Dowson said: They are in the Offset Mapping for PMDG 777 document which should be in your GSUIPC7 documents folder, and is attached below. John Offset Mapping for PMDG 777.pdf 223.63 kB · 0 downloads Is this every offset available or just what has been mapped so far? For example there is nothing in there for throttle or autothrottle. I am designing/building a throttle quadrant. Link to comment Share on other sites More sharing options...
John Dowson Posted August 29 Report Share Posted August 29 30 minutes ago, PriZeFighter13 said: Is this every offset available or just what has been mapped so far? That is everything available from the PMDG 777 SDK. 30 minutes ago, PriZeFighter13 said: For example there is nothing in there for throttle or autothrottle. If there are no specific offsets for throttle or auto-throttle, maybe the 777 is using the provided simvars in which case you can use the standard/general offsets for this. Otherwise look at the available lvars, which can be added to spare/free FSUIPC offsets if required (for both read and write - PMDG offsets are read-only). I can see these lvars that may be of use: Throttle1_Pos Throttle2_Pos XMLVAR_LeverThrottleHidden1 XMLVAR_LeverThrottleHidden2 MCPAutothrottleSwitchOnLeft MCPAutothrottleSwitchOnRight MCPAutothrottleSwitchOffLeft MCPAutothrottleSwitchOffRight There are no "Input Events" available for the PMDG 777. There may be some H-vars (HTML variables), but you would need to inspect the throttle behavior to discover these (see https://www.badcasserole.com/uncovering-input-events-using-the-msfs2020-model-behavior-dialog/). But Hvars don't hold values and are only for controlling HTML elements in the UI, so most probably not relevant. If none of this is sufficient for your needs, you can ask PMDG about this. John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now