Jump to content
The simFlight Network Forums

hrings

Members
  • Posts

    65
  • Joined

  • Last visited

Everything posted by hrings

  1. *** Moved from FAQ sub-forum to FSUIPC7 sub-forum *** Is it possible to use the old serieconnected Radiopanel from FlyPFC with MSFS and if so how is it done Best Henning
  2. *** Moved from FAQ sub-forum - please use FSUIPC7 sub-forum for all support requests/questions on FSUIPC7 *** I bought the fsuipc 7 from Simmarket, but after donloading and installation it says all the time tha the key is wrong. I tried to uninstall and reinstall without help. Can you pse help me with this HenningR
  3. Is there any posibility to load the FSUIPC 6 for so to reprogram them to fit the 7. Or do I have to program it new all over I have a lot of switches spes. 737 overhead panel. Bestreg. HenningR
  4. Can you tell me where to find good literature for reading up on JOY Letters. Have difficulty to find B: HenningR
  5. I can see that the JOY No for the Leoboards are changed from the P3Dv4 to P3dv5. Is it ok to rename theese JOYs to set tham as they where in 4.3 setup so I can use that . ini file and not reprogramming all Switches via FSUIPC? Best HenningR
  6. Thanks John. it shows clesrly that it was somethimg wrong with the StLab PCIe card. As soon as I put in the USB/Serial converter it went straight in and worked. But,due do you know how to reset port numbers in Devise Manager. Because I had tried so many times (I guess) the converter started as Port 31 even if there was no other once connected.
  7. All that com ports are used for additional screens like FPanel, ND, upper and lower Eicas and a lot of Arduino cards. The Avionic panel is connected to Port 16 wich is the first port on the ST Lab PCIe serial card. It was functioning like this on the old PC but as I did not have a regular PCI slot in the new one, only a PCIe I had to buy a new card. I will test when I receive a new USB to serial converter. Thanks for strugling with me HenningR
  8. Sorry for messing up, I am not that good in the data World, I am only and very old airlineJockey that likes still to fly I now deleted the PFCcom64 both log and ini. Started P3D and shut it down and the enclosed files are what I got. Obviously by the Devise Manager it should be connected to com 16 but when tried that on the connection picture got just a Red notch. Switching to com 3 it was green. I have a lot of screens connected via USB. Have ordered an usb to serial converter to see if there i a fault on my St Lab PCIe card PFCcom64.log PFCcom64.ini
  9. Obviously something is wrong. This file was to big to be included so I shortened it, and it seems like it is continuing this way HenninR Shortpfccom64.log
  10. Latest downloaded now FSUIPC6.log FSUIPC6.ini PFCcom64.ini
  11. In addons under the menue i P3d where you find both FSUIPC and PFC setup Newest FSUIPC6 log jun 23.txt Newest FSUIPC6 jun23.txt
  12. When set in addons (FS) PFC port to 16 and then restarted sim and the choose port 16 it was green but no radiopanel
  13. Here is what I got. If you need more please ask. On COM 16 and 17 the com is red, it was green on 3 as I used before but no connection to radio panel. I cleaned the register an installed fresh as instructed by installer. I have sut it down again but as far as I remember it's located C:/User/Henni(My pc)/documents/p3dv5Addons/FSUIPC6 All should be included Kopi av FSUIPC6.ini ny FSUIPC6.ini p3dv5.txt ny FSUIPC6.log p4dv5.txt OLD FSUIPC6 LOG p3dv4.txt OLD FSUIPC6 p3dv4.txt
  14. I also noted that in the FSUIPC ini file the numering of Leo divices was altered on the new build PC. Can I just renumber in the .ini file to use my old setup for the 737 (Copy/paste) or do I have to reprogram all switches
  15. I used the PFC radio on my old PC that Crashed. It was then used on P3Dv4 and PMDG 737-800. Then it was ok and was in the Module folder. Now, after rebuild of new PC I changed to P3Dv5 and PMDG NGXu 737-800. I placed the FSUIPC 6.1.9 and PFC.DLL and PFCHID in the FSUIPC folder on drive D. The serial Radio is connected to an own serial board on the PC with USB port 16 and 17 and no flag on event viewer but when it runs the initiation page I only gor RED cross on radiopanel. the two upper once are green hatch. Are uoy able to tell me what I am doing wrong. Best regard HenningR
  16. Thanks for that tip. that solved a lot of problems <but I still have some : There is a clock that comes regulary with Event ID 65660 and 65661. Where do I find the old original event ID's that are around 65000. I can only find the one that comes with PMDG 737 Henning
  17. And whats UI And with logging consol open do you then mean On the FSUIPC or the .log file Henning
  18. The correct is 70325 is from the PMDG 737NGx Custom Event ID's under control stand "Parking Brake Lever SDK value 693 and as this operate an momentay switch I assume that 536870912 is the correct FSUIPC6.ini FSUIPC6.log
  19. I have tried to sort out but the fault still apply FSUIPC6.ini
  20. Sorry I forgot to tell it is the PMDG 737 NGx and NGXu I am using and only that. The Eventid 70325 is the PMDG Event Id for Parking brakes. so what can I delete and what to rename? I see some double files that can be deleted Henning
  21. I have a button connected via an LeoBodnar board and programmed FSUIPC. Problem is that it shows ok in 5-19 sec then release the parking brake. <i have tried both the event ID's 70325 and 65752. Both do the same. They are programmed only in when button pressed and with 536870912 as it is a momentary switch. I have gone through the .ini page but there is no duplicate to either Event or input (P3,0,C70325,536870912 I also have problems with right eng hydraulic is flipping on of at intervalls and unable to find the falt. I include my .ini file Best Henning Ringsvold henning@ringsvold.no FSUIPC6.ini
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.