58050

Further to my last post I can now confirm that I've got Tower3D Pro to work OK on all the airports TIST, KPHL, KLAX, KJFK & KSAN with Real Traffic. Although KSAN loaded up to 99% & stayed there. After closing & re-running Tower3D Pro I went through all the other airports & they worked OK. On my 2nd attempt of running KSAN that has now run OK. Thanks to all who assisted me in this.

Andrew, sorry for the delay I am currently re-installing Tower3D Pro on its own. The details of my PC are:- Processor: AMD FX(tm)-8320 Eight Core Processor 3.50Ghz 16Gb RAM OS - Windoewws 10 System Type: 64 bit-Operating System, x64-based processor The graphics card is set at the maximum level Tower3D can operate at & is more than capable of running it as Tower3D ran no problem. I've re-downloaded everything & extracted eveything into a folder on the desktop with a view of pasting the various folders into the main folders of Tower3d Pro to see if that cures the problem. Many thanks for your advice.

Unfortunately I can't do that as I've uninstalled everything to do a fresh install. However now I can't run any of the airports. See post on Tower3D Pro Crashes thread. If I manage to get the program to work I'll run KSAN again to see if it does the same thing again. If it does I'll p[ost the log file. Sorry about that.

Can anyone assist me in what I'm doing wrong. When I first installed Tower3D Pro I installed it alongside the original Tower3D. Everything worked OK except KJFK. I tried several times to install the add-on & when the game started (run using Administrator authority) KJFK never appeared. I've uninstalled everything. Today however I thought I'd just install Tower3D Pro on it's own & then install the add-ons(Real Traffic & Real Color & KJFK, KSAN). Now I've loaded everything in Tower3D Proo none of the airports load up & run:- TSIT - sound comes through OK when loading & the loading arrow goes up to 27% & thats it. KPHL - sound comes through OK, but loading arroe stays at 0%. KJFK - sound comes through whenloading, but arrow stays at 0%. But then radio messages are heard such as the 1st plane requesting pushback followed by a Fed Ex flight requesting permission to land, but the loading arrow stays at 0%. KLAX - sounds come through whilst loading but the loading arrow gets to 27% & doesn't go any further. KSAN - sound comes through OK, but loading arrow gets to 27% & doesn't go any further & then a window appears to say program has stopped working & needs to shut down. What I want to know is should Tower3D be installed & then install Tower3D Pro along side it or should Tower3D Pro be able to run on its own without the original Tower3D Pro?

Having started the game at 06.31 ready for the first flights at KSAN. SKW5190 calls up for pushback, pushback accepted & the plane is positioned ready to taxi. However when SKW5190 calls up for permission to taxi & permission is granted to taxi to runway 9 the plane refuses to move & as a result is blocking access for planes & cargo flights going between there respected terminals or going from there to terminals to Runway 9.

OK AirborneCDS thanks foir that I wasn't aware of the opening times for KSAN. I'll bear that in mind from now on.

I don't know if anyone else has had this problem, but I've selected to run KSAN & start at 00.00, however each time the sim loads & starts the time on the clock when the game starts is 16.30. I was expecting everything to be in darkness & got a shock when it was daylight. I closed it down & double checked I had the clock set correctly & it was re-run the sim & the same thing happened again. Daylight & the clock stating 16.30. Setting the clock at 01.00 or 02.00 & running the sim, this time it started at 06.31.

Thanks for your help with this. Sit rep now is that I've managed to get the radio traffic sounds to work by opening the program as administrator after reading another thread on the forum & I've found the manual & will be reading through this shortly. I've also managed to install the Real Traffic, Real Color & the other airports by altering the destination folder to where they are supposed to go as they weren't installing the add-ons into Tower3D Pro, but Tower3D. The whole thing looks brilliant & great work by those involved. I could manage to run KLAX on my own in Tower3D, but from starting Tower3D Pro KLAX at midnight I could see that this is a completely different animal in respect of the higher level of RT traffic. So I'm going to start with TSIST then go onto KSAN then KPHL & then KLAX before trying KJFK. I've got a set of headphones with a boom mike so hopefully for KPHL onwards I could get that set up & may make it alot easier to control the higher level of traffic.

Hi all, sorry for asking this & being so dumb but I've just purchased & downloaded Tower3D Pro. My first quiery is should I uninstall Tower3D & all the associated add-ons (KJFK, KSAN plus Real Color & Real Traffic)? Reason for this when I installed Tower3D Pro along with fresh installs of the associated add ons & ran the program for the 1st time when the sim started I couldn't hear any of the radio traffic messages for aircraft calling up. I completely uninstalled everything & re-installed the Tower3D Pro program along with all the associated add-ons & this time the same thing happened again aircraft would appear at the gates but no radio communications could be heard, furthermore despit installing all the Real Color add-ons all the aircraft were blank or white & if I selected KSAN as the airport to control the drop down menu had it on there but if you selected it the airport didn't appear on the screen like the other it had a banner stating 'IF YOU WANT TO LEARN MORE CLICK ON BANNER'. Don't suppose there's an idiots guide to installing & setting up the Pro version. Graphics wise on the screen all looks good though. Many thanks for any advice.

OK winsaudi thanks for the advice. Tried it again to download from the 3 links BMT micro sent, but again it's only coming up with KSAN SP1 in the download box. I've open my downloads folder & all the other RC files are there for KJFK, TIST, KPHL & KLAX, but there isn't a RC file in the downloads folder for KSAN at all. I'll send them an e-mail on the address you've listed.

I've had something similar today. I noticed on the feelthere website that Real Color for KSAN had been released, so I purchased the item & received the download links for it. However when I entered the code for the product after attempting it 5 or 6 times I couldn't install it as the next button remained faded & despite checking the product code in the e-mail still couldn't get it to work. I then re-downloaded the KSAN file as I read on here that SP1 was availble. Installed that OK, but when I go back to the download links for the Real Color for KSAN & sekect any of the 32 links from BMT micro the only file it hives me to download is the KSAN SP1. My question is, is the Real Color for KSAN included in SP1 for KSAN? If it isn't then I don't seem to be able to download the Real Color file from the links sent by BMT micro despite paying for it.

Many thanks for the text file, appreciate that.

Many thanks for the advice winsaudi I'll give that a go.

Further to my earlier post regarding ABW597 on restart of the simulation this time the ABW597 with the 748/H aircraft this time it taxied to runway 25R & took off as directed but the plane went off runway 25R & continued into the distance without appearing on the air radar screen & wasn't able to contact departure as that option never came up. However instead of removing the ABW597 plane which was the 744/H I decided to direct that aircraft to runway 25R. This time the plane taxied out to runway 25R(this plane displaying ABW livery of blue & white). Then ETH504 appeared twice. The plane marked as 788/H to land on runway 24R which is too short I decided to click on the strip marked as 77L/H on runway 25R, but the acknowledgement rick appears on the aircraft shown to land on runway 24R. At 09.17 ETH504 requests permission to land on runway 24L [788/H] immeadiately followed by amother ETH504 requesting permission to land on runway 25R [77L/H]. However tick only appears on the 1st arrival strip. Both planes that appear to be wrong appear without any livery schemes & once you delete those 2 aircraft the other aircraft of the same flight number then behaves properly & the tick then appears on the strip when you then request taxi or clear to land.

I've found another issue with the Nyerges Real Traffic at KLAX. At 0917 ETH504 requests permission to land on runway 24R. However on giving permission to land it is then denied due to the runway being too short. Having no option to change the runway to 25R I told the aircraft to go around & contact departure. Despite the aircraft disappearing off the air radar, I then switched views a few minutes later to clear NKS630 to take off from runway 24L only to see ETH504 coming into land on runway 24R with wheel down, but the plane carried on in this view all the way along the runway & not showing on any radar screen. When you click on the arrivval strip you get the options of 'TAXI TO', 'CONTINUE TAXI', or 'HOLD POSITION' with the actual aircrat moving over the sea.

Further to the above post at 0904 ABW597 from KLAX to KORD appears twice, one being 748/H & the other being 744/H. Despite them appearing twice in different locations on the ground radar screen only one aircarfts appears to do anything.

Another issue I've found running the latest SP3 at KLAX with the latest Nyerges SP for Real Traffic is at 0503 FDX802 enters from PHNL [77L/H] is is allocated to land at runway 24L. The plane lands OK, but once is leaves the runway you assign it to taxi to terminal the plane just sits there & doesn't move. I've tried the other options(Apron & Ramp) in case terminal isn't correct for non passenger carrying aircraft & FDX802 still doesn't move. The only way round it is to delete plan. If you do that however later on another FDX aircraft calls up for being ready to depart but there's no aircarft to move which I assume is this one, but as it has been de3leted there's nothing to depart. The only thing I thoughtis because this aircraft is a cargo flight use must use Ramp or Apron, but that still doesn't make the aircraft taxi. It's a pity you can't re-allocate the runway to land such as 25R inc ase that is a way round the issue like you could on the original Tower simulation. Apologise for not posting a screen grab, but I haven't sussed out how to do that.

Further to my earlier post I've re-rum KLAX from 00.00 & CPA97 appears twice at 02.37. On the ground radr screen it appears at 2 different locations & as stated in previous post one is 744/H & the other is 748/H. However the only one that tends to do anything is the one marked as 744/H. Both strips are the same showing the plane going from KLAX to MMMX. Using the latest version of Nyerges Real Traffic.

Hieveryone, this is my first post. I'd like to say Tower3D is an excellent sim. I remember pouchasing the first Tower program around 10 years ago or more when you had the choiuce of 5 airports. How things have progressed in time. After readeing on the forum in the last day or 2 I unistalled everything & re-downloaded all the programs I've purchased for Tower3D as I'd read servive pack 3 was available & Vic had suggested unistalling before re-installing the new SP. For the first time I thought I'd have a go at KLAX. I installed the new SP3 of the main programme followed by Real traffic & Real Colour for all the airports. I started the sim at 00.00 & at some point within the first couple of hours I had CPA97 appear, but it appeared twice with 2 departure strips, the only difference was aircraft type. One was 744/H & the other was 748/H. When I ordered them both to taxi to 25R only one of the planes moved which appeared to be the 744/.H. The other CPA97 sttrip stayed & the only way to get rid of it was to remove plane. Sorry for not being able to give you an exact time but IIRC it after an hour or 2 of gameplay. Once again superb sim & hopefully there'll be a UK airport in the future as I live in the UK. Many Thanks Pascal.