Jump to content
The simFlight Network Forums

WFH

Members
 View Profile  See their activity

  • Posts

    97

  • Joined

  • Last visited

 Content Type 

Posts posted by WFH

    Patch 8.4.1

    in (Former) FS Commander Support Forum

    Posted

    Thanks Volker but I have that already. There is an English readme files in the zip for 8.4.1 and another for 8.4.2 but only one exe file. What I am after is the exe file that came with 8.4.1 not the file that has been amended for those who cannot download the weather.

    Patch 8.4.1

    in (Former) FS Commander Support Forum

    Posted

    What happened to this patch?? It worked fine for me and having reinstalled FSC on new HD I can not find it. 8.4.2 is no good as it has the old address for the weather.

    A link to it would be appreciated or email it to me at ukv1624 @ btopenworld.com (remove spaces)

    TVM

    Transitiona Altitude

    in (Former) FS Commander Support Forum

    Posted

    And don't forget it is more fun for the controller also if there is a pilot flying outbound or inbound who has his act (charts) together.

    And it is a heck of a lot more fun for a pilot if having to make an emergency landing he can get the TA quickly rather than having to go into a website to check a chart (unless of course one has the chart for every airport en route - I think not :wink:) Real pilots (and good Sim pilots) don't hit the pause button.

    If it could be put on the ToDo list at some time in the future that would be nice.

    Unable to connect to FS2004

    in (Former) FS Commander Support Forum

    Posted

    Hi Derek - 71 years young and getting into computers - great. I am just coming up to 64 and love FS as well.

    Now - are you a member of a virtual airline? I ask because with some you can get very good instruction but would need a headset and microphone combined (not expensive) and you could then get verbal instructions via Teamspeak (that's free) or similar. The one I belong to is FlyUK although it matters not where in the world you live. We have excellent instructors who can give you all the help you may need. Click on the banner below and it will take you to the site where you can have a good look around. If you want to discuss this off forum just send me a private message - just click WFH (in blue above).

    Weather Topic New

    in (Former) FS Commander Support Forum

    Posted

    For those of you able to download the weather file, are you getting an accurate reading.

    Mine checks out perfectly against Active Sky and http://en.allmetsat.com and always has. The firewall would seem to be right at the heart of the problem. Try eset.com - takes two minutes to set up and thereafter it does all the work trapping new programs and setting the firewall up for them. Absolutely brilliant. It is important that every bit of the previous firewall is deleted, going through the registry if necessary.

    Payware (just under £100 for three year licence) but there is a trial version available.

  8. I have not got a clue where I have gone wrong

    in FSUIPC Support Pete Dowson Modules

    Posted

    Peforming full reinstall of Server to relieve pressure. Registered version of FSUIPC for FSX on XP - latest version installed, registration details inserted, confirmed and rebooted.

    Port 8002 for WideFS opened in Windows firewall on both server and client. They just do not connect. Both computers access internet through home hub without any problem but not 'chatting' to each other. Searched on 24093 Error on client pre-Connection Select() [Error=10060] Connection timed out and turned up one or two threads non e of which helped. Having been trying to sort this for 6 hours am now running out of ideas. Any help appreciated.

    ********* WideClient Log [version 6.75] Class=FS98MAIN *********

    Date (dmy): 26/10/08, Time 13:44:29.734: Client name is CLIENT

    3109 Attempting to connect now

    3125 Trying TCP/IP host "SERVER" port 8002 ...

    3125Okay, IP Address = 192.168.1.65

    24093 Error on client pre-Connection Select() [Error=10060] Connection timed out

    24093 Ready to try connection again

    25093 Attempting to connect now

    69093 Trying TCP/IP host "SERVER" port 8002 ...

    69093Okay, IP Address = 192.168.1.65

    135343 Trying TCP/IP host "SERVER" port 8002 ...

    135343Okay, IP Address = 192.168.1.65

    201531 Trying TCP/IP host "SERVER" port 8002 ...

    201531Okay, IP Address = 192.168.1.65

    267468 Trying TCP/IP host "SERVER" port 8002 ...

    267468Okay, IP Address = 192.168.1.65

    333781 Trying TCP/IP host "SERVER" port 8002 ...

    333781Okay, IP Address = 192.168.1.65

    399968 Trying TCP/IP host "SERVER" port 8002 ...

    399968Okay, IP Address = 192.168.1.65

    466031 Trying TCP/IP host "SERVER" port 8002 ...

    466031Okay, IP Address = 192.168.1.65

    532156 Trying TCP/IP host "SERVER" port 8002 ...

    532156Okay, IP Address = 192.168.1.65

    598468 Trying TCP/IP host "SERVER" port 8002 ...

    598468Okay, IP Address = 192.168.1.65

    600984 ****** End of session performance summary ******

    600984 Total time connected = 0 seconds

    600984 Reception maximum: 0 frames/sec, 0 bytes/sec

    600984 Transmission maximum: 0 frames/sec, 0 bytes/sec

    600984 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0

    600984 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********

    ********* WideServer.DLL Log [version 7.30] *********

    Blocksize guide = 4096 (double allowed)

    Date (dmy): 26/10/08, Time 13:17:41.156: Server name is SERVER

    15188 Initialising TCP/IP server

    15188 Initialising IPX/SPX server

    15188 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family

    15188 Failed to start IPX/SPX Server

    15188 Initialising UDP/IP server

    16156 Broadcasting service every 1000 mSecs

    2200422 Closing down now ...

    Memory managed: Offset records: 1070 alloc, 1069 free

    Read buffer usage: 0 alloc, 0 free, max in session: 0

    Write buffer usage: 0 alloc, 0 free, max in session: 0

    Throughput maximum achieved: 0 frames/sec, 0 bytes/sec

    Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec

    ********* Log file closed *********

    ; PLEASE SEE WideFS documentation for parameter details

    ; =====================================================

    [Config]

    ServerIPAddr=192.168.1.65

    ServerName=SERVER

    Protocol=TCP

    Port=8002

    Window=43,44,886,589

    Visible=Yes

    ButtonScanInterval=20

    ClassInstance=0

    NetworkTiming=5,1

    MailslotTiming=2000,1000

    PollInterval=2000

    Port2=9002

    ResponseTime=18

    ApplicationDelay=0

    TCPcoalesce=No

    WaitForNewData=500

    MaxSendQ=100

    OnMaxSendQ=Log

    NewSendScanTime=50

    Priority=3,1,2

    ; -----------------------------------------------

    [user]

    Log=Errors+

    ; ===============================================

  11. Loss of WideFS coonection

    in FSUIPC Support Pete Dowson Modules

    Posted

    All of a sudden I cannot get a WideFS connection between my PC and laptop. Everything else is fine. I can alter files etc on the other machine through the network so that would not seem to be the problem. The exceptions are set out correctly in the firewall and I am now stumped as to what the problem may be.

    This is a copy of the log from the laptop

    ********* WideClient Log [version 6.75] Class=FS98MAIN *********

    Date (dmy): 23/02/08, Time 13:37:53.741: Client name is CLIENT

    1438 Attempting to connect now

    2125 Server = SERVER

    2156 Trying TCP/IP host "SERVER" port 8002 ...

    2156Okay, IP Address = 192.168.1.84

    23156 Error on client pre-Connection Select() [Error=10060] Connection timed out

    23156 Ready to try connection again

    This is a copy of the log from the PC

    ********* WideServer.DLL Log [version 7.25] *********

    Blocksize guide = 4096 (double allowed)

    Date (dmy): 23/02/08, Time 13:23:06.963: Server name is SERVER

    15319 Initialising TCP/IP server

    15319 Initialising IPX/SPX server

    15319 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family

    15319 Failed to start IPX/SPX Server

    15319 Initialising UDP/IP server

    16130 Broadcasting service every 1000 mSecs

    I am in no way a network expert or anywhere close to one and senior moments are becoming more frequent :oops: so be gentle if the error is blatantly obvious.

    Using FSX with all service packs (but not Acceleration) and Vista Home.

    Thanks

    This is a sad day

    in FSNavigator Support Forum

    Posted

    However, it seems to me that even with a protracted illness or accident, SOMEBODY would have contacted SOMEONE and let them know WHAT is happening.

    Helge produced a program for FS9 that worked and still does. The real world sometimes gets in the way of the fantasy world and frankly it is none of our business what his present situation is. He produced, we paid - contract satisfied. At least the program is still available for download by registered users which is more than can be said for all the PSS customers.

    Have a nice weekend.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.