Jump to content
The simFlight Network Forums

Edmundo

Members
  • Content Count

    32
  • Joined

  • Last visited

Everything posted by Edmundo

  1. Thanks for your help Pete, I have FSUIPC working again, I just have to sort out Linda. Many Thanks,
  2. Hi Pete, Looking forward, My Flght sim PC has 3 drives 1 SSD with windows 7 on. 2 Western Digital Raptors one with FSX on and one with scenery on. However the SSD with windows on only has 16GB of space left on it, Rather than spending time now trying to sort out my problems do you think I would be better changing my SSD for a new 1 Tb drive and having Operating system and FSX on the same drive. Then Install FSUIPC, Linda, and all of my hardware, I know its a lot work, but hopefully I will be heading in the right direction, below is a spec of my PC at the moment, and is there any advice you could add. Many thanks. Flight sim PC Build Spec Operating system Windows 7 Pro 64bt Processor Intel Core I7-980X Hexa Gulftown P C Case Lian li PC-V1000 plus Aluminium case Motherboard Asus P6T Delux V2 X58 Memory Mushkin 6GB Low Latency Heatsink , Titan Fenrir Evo SSD Drive OCZ Vertex 3 Windows 7 Professional OS Hard Drive western Digital Raptor 300 GB Microsoft FSX Hard Drive Western Digital Raptor 150 GB Graphics Card EVGA GeForce GTX 580 1536MB GDDR5 Sound Card Creative X-Fi Titanium Fatality Professional Optical Drive Pioneer DVR116DBK Blue Ray 4 BD ROM, LITE ON Power Supply BFG ES 800 Watt Saitek Pro Flight yoke & Throttle Monitors Dell 27” U2711 Ultra sharp Dell 24” Ultra sharp Dell 17” Flat Panel Throttle now Go flight TQ6.
  3. Hi Pete, Thanks for your reply. I will over the weekend try uninstalling the joystick/yoke from the device manager. Connected I have Saitek Yoke axis assigned and Calibrated through FSUIPC Go Flight TQ6 Throttle Quad Axis assigned and calibrated through FSUIPC Go flight landing gear and flaps module. Go flight switch panel not used,(have not yet managed to get it to work with PMDG 777. Go flight Engine start module used with default 737, not managed to get it working on PMDG 777 VRinsight MCP combo 2 Boeing set up through Linda (until I tried updating Linda.) All worked fine before update. Many thanks Pete.
  4. Thanks Pete, I have spent all day today with this and not sure where to go next, If I double click the Linda.exe in the modules folder Linda runs but does not find FSUIPC. The Joystick and throttle have not been removed, any ideas why they are not recognized. Com 3 is where the device manager shows the VRI is. Thank you for your help, although I dont know what to do next. Many thanks.
  5. Hi Pete. FSUIPC.ini file below [General] UpdatedByVersion=4949 History=PJ41IMHKQPA0LES5G71MF InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=Yes MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=Yes FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=Yes SuppressCloudTurbulence=No MaxIce=-1 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=Yes SuppressWindVariance=Yes WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=Yes WindSmoothing=Yes WindSmoothness=1 WindSmoothAirborneOnly=Yes PressureSmoothness=20 TemperatureSmoothness=100 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=Yes RudderSpikeRemoval=Yes ElevatorSpikeRemoval=Yes AileronSpikeRemoval=Yes ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=Yes TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=Yes BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=Yes DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Flight TCASrange=0 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 ShortAircraftNameOK=Yes Console=No AssignJoystickIDs=Yes OOMcheckInterval=10 FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No [Axes] PollInterval=10 RangeRepeatRate=10 [buttons] PollInterval=25 ButtonRepeat=20,10 12=R2,0,C65588,0 13=P2,1,C65752,0 27=R2,32,C65734,0 28=U2,32,C65734,0 29=U2,34,C65672,0 30=R2,33,C65856,0 31=U2,33,C65856,0 32=R2,34,C65672,0 33=R2,35,C65857,0 34=U2,35,C65857,0 35=R2,36,C65735,0 36=U2,36,C65735,0 37=U2,38,C65671,0 38=R2,37,C65855,0 39=U2,37,C65855,0 40=R2,38,C65671,0 41=R2,39,C65854,0 42=U2,39,C65854,0 43=R2,2,C65607,0 44=R2,3,C65615,0 [MacroFiles] 1=767 2=iFly737 3=MADDOG2 [LuaFiles] 1=DynamicFriction 2=ipcReady 3=linda [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=H:\FSX\Sound\ Device1=Primary Sound Driver Device2=Speakers (Creative SB X-Fi) Device3=SPDIF Out (Creative SB X-Fi) Device4=DELL U2414H-0 (NVIDIA High Definition Audio) [buttons] ButtonRepeat=20,10 3=R1,8,C66080,0 4=U1,8,C66079,0 15=R0,32,C65734,0 16=U0,32,C66416,-1 17=R0,33,C65856,0 18=U0,33,C66416,-1 19=R0,34,C65672,0 20=U0,34,C66416,-1 21=R0,35,C65857,0 22=U0,35,C66416,-1 23=R0,36,C65735,0 24=U0,36,C66416,-1 25=R0,37,C65855,0 26=U0,37,C66416,-1 27=R0,38,C65671,0 28=U0,38,C66416,-1 29=P0,39,C65854,0 30=U0,39,C66416,-1 39=U1,1,C0,0 PollInterval=25 40=R2,0,C65588,0 42=R2,2,C65607,0 45=R2,32,C65734,0 46=R2,33,C65856,0 47=R2,34,C65672,0 48=R2,35,C65857,0 49=R2,36,C65735,0 50=R2,37,C65855,0 51=R2,38,C65671,0 52=R2,39,C65854,0 57=R2,3,C65615,0 60=R0,7,C66080,0 62=R0,6,C65602,0 63=U0,6,C65602,0 65=U2,2,C65706,0 66=U2,3,C65694,0 70=U0,7,C66079,0 72=P109,0,C66240,0 73=U109,0,C66240,0 74=P109,1,C66060,0 75=U109,1,C66059,0 76=P109,2,C3,0 [MacroFiles] 1=767 2=iFly737 3=MADDOG2 [LuaFiles] 1=ipcReady 2=linda 3=DynamicFriction [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=H:\FSX\Sound\ Device1=Primary Sound Driver Device2=Speakers (Creative SB X-Fi) Device3=SPDIF Out (Creative SB X-Fi) [Window.LUA display] Docked=7352, 2723, 3549, 2475 [VRInsight] 1=COM3 [Programs] Run1=HIDE,H:\FSX\FSX.bat RunIf1=H:\FSX\Modules\linda.exe [ClientNames] 1=KENSIKDRAGONFLY [Keys] 1=32,8,1127,0,1128,0 [Auto] 1=Lua Dynamicfriction [General] UpdatedByVersion=4939g History=KC9M2CGOBO69F302ZOH23 InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=Yes MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=YES AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Flight TCASrange=0 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No SpoilerIncrement=512 FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [Axes.Default 737] RangeRepeatRate=10 0=0X,256,D,22,0,0,0 1=0Z,256,D,4,0,0,0 2=0U,256,D,4,0,0,0 3=2X,256,D,1,0,0,0 4=2Y,256,D,2,0,0,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Spoilers=-16380,-512,10493,16380/16 Aileron=-16384,-512,512,16128 Throttle2=-16384,-16384,-16384,16383 ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 Throttle=-16384,16209 Elevator=-16287,-512,512,16383 [Profile.Default 737] 1=Default 737 2=Boeing 737-800 Lauda Air [Axes] PollInterval=10 RangeRepeatRate=10 [Profile.Virgin 777] 1=PMDG 777-243LR Virgin Atlantic Airways (Fictional) [Axes.Virgin 777] RangeRepeatRate=10 0=0X,256,D,22,0,0,0 1=0Z,256,D,9,0,0,0 2=0U,256,D,10,0,0,0 3=2X,256,D,1,0,0,0 4=2Y,256,D,2,0,0,0 [buttons.Default 737] 1=R0,2,C65602,0 2=U0,2,C1065,0 3=P0,1,C65602,0 5=P2,1,C65752,0 11=R2,2,C65607,0 12=R2,3,C65615,0 13=P168,17,C65758,0 14=P168,16,C65759,0 15=R167,1,C66080,0 16=R167,0,C66079,0 17=U0,1,C65697,0 18=U2,3,C65615,0 19=U2,2,C65607,0 22=R2,33,C65856,0 23=U2,33,C66416,0 24=P166,2,C1061,0 28=P166,7,C1062,0 31=P166,4,C66494,0 32=P166,3,C66495,0 33=P166,0,C66531,0 34=P166,1,C66531,0 35=P166,5,C66531,0 [buttons.Virgin 777] 0=R0,2,C65602,0 1=U0,2,C65598,0 2=P109,0,C66240,0 4=P109,1,C66060,0 5=U109,1,C66059,0 6=R2,32,C65734,0 7=R2,33,C65856,0 8=R2,34,C65672,0 9=R2,35,C65857,0 11=R2,36,C65735,0 12=R2,38,C65671,0 24=P167,1,C66080,0 25=U167,1,C66080,0 26=P167,0,C66079,0 28=R2,0,C65588,0 29=R2,39,C65854,0 31=R2,37,C65855,0 33=U2,32,C66416,0 34=U2,36,C66416,0 35=U2,33,C66416,0 36=U2,34,C66416,0 37=U2,35,C66416,-1 38=U2,37,C66416,0 39=U2,38,C66416,0 40=U2,39,C66416,0 41=P2,1,C65752,0 42=U2,1,C65752,0 43=P168,17,C65758,0 45=P168,16,C65759,0 [Profile. PMDG 777] 1=PMDG 777-200LR PMDG House [buttons. PMDG 777] 0=R2,32,C65734,0 1=R2,36,C65735,0 2=R2,38,C65671,0 3=R2,34,C65672,0 [Axes] PollInterval=10 RangeRepeatRate=10 [Profile.British Airways 777] 1=PMDG 777-236LR British Airways (Fictional) [Axes.British Airways 777] RangeReapeatRate=10 RangeRepeatRate=10 0=0X,256,D,22,0,0,0 1=0Z,256,D,9,0,0,0 2=0U,256,D,10,0,0,0 3=2X,256,D,1,0,0,0 4=2Y,256,D,2,0,0,0 [buttons.Default 737] 1=R0,2,C65602,0 2=U0,2,C1065,0 3=P0,1,C65602,0 5=P2,1,C65752,0 6=R2,32,C65734,0 8=R2,36,C65735,0 9=R2,38,C65671,0 10=R2,34,C65672,0 11=R2,2,C65607,0 12=R2,3,C65615,0 13=P168,17,C65758,0 14=P168,16,C65759,0 15=R167,1,C66080,0 16=R167,0,C66079,0 17=U0,1,C65697,0 18=U2,3,C65615,0 19=U2,2,C65607,0 20=U2,34,C65672,0 22=R2,33,C65856,0 23=U2,33,C65856,0 24=R2,35,C65857,0 25=U2,35,C65857,0 27=R2,37,C65855,0 28=U2,37,C65855,0 29=U2,38,C65671,0 30=R2,39,C65854,0 31=U2,39,C65854,0 32=U2,36,C65735,0 33=U2,32,C65734,0 [buttons.British Airways 777] 0=R0,2,C65602,0 1=U0,2,C65598,0 2=P109,0,C66240,0 4=P109,1,C66060,0 5=U109,1,C66059,0 6=R2,32,C65734,0 7=R2,33,C65856,0 8=R2,34,C65672,0 9=R2,35,C65857,0 11=R2,36,C65735,0 12=R2,38,C65671,0 24=P167,1,C66080,0 25=U167,1,C66080,0 26=P167,0,C66079,0 28=R2,0,C65588,0 29=R2,39,C65854,0 31=R2,37,C65855,0 33=U2,32,C66416,0 34=U2,36,C66416,0 35=U2,33,C66416,0 36=U2,34,C66416,0 37=U2,35,C66416,-1 38=U2,37,C66416,0 39=U2,38,C66416,0 40=U2,39,C66416,0 41=P2,1,C65752,0 42=U2,1,C65752,0 43=P168,17,C65758,0 44=P168,16,C65759,0 45=P166,2,C1061,0 47=P166,0,C66531,0 51=P166,5,C66531,0 53=P166,7,C1062,0 62=P109,6,C66705,0
  6. Hi Pete. Log below ********* FSUIPC4, Version 4.949 by Pete Dowson ********* fsx.exe version = 10.0.61637.0 Reading options from "H:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=56B90000 User Name="David Edmunds" User Addr="kimdaveedmunds@aol.com" FSUIPC4 Key is provided WideFS7 Key is provided 15 System time = 07/01/2016 16:53:33 15 FLT UNC path = "\\MISSIONRANCH\Users\Dave\Documents\Flight Simulator X Files\" 15 ------ Module Version Check ------ 15 acontain.dll: 10.0.61637.0 15 api.dll: 10.0.61637.0 15 controls.dll: 10.0.61637.0 15 fs-traffic.dll: 10.0.61637.0 15 G3D.dll: 10.0.61637.0 15 sim1.dll: 10.0.61637.0 15 visualfx.dll: 10.0.61637.0 15 weather.dll: 10.0.61637.0 15 window.dll: 10.0.61637.0 15 ---------------------------------- 62 Trying to connect to SimConnect Acc/SP2 Oct07 ... 78 FS UNC path = "\\MISSIONRANCH\FSX\" 405 ---------------------- Joystick Device Scan ----------------------- 405 ------------------------------------------------------------------- 608 Run: "H:\FSX\FSX.bat" 608 FSUIPC couldn't run: "H:\FSX\Modules\linda.exe" [Error=2] 608 LogOptions=00000000 00000001 608 ------------------------------------------------------------------- 608 ------ Setting the hooks and direct calls into the simulator ------ 608 --- CONTROLS timer memory location obtained ok 608 --- SIM1 Frictions access gained 608 ASN active function link set 608 VRI port 1 "COM3" failed to open 608 --- FS Controls Table located ok 608 --- Installed Mouse Macro hooks ok. 608 Wind smoothing may be by ASN, not FSUIPC, if it is running 608 Will switch smoothing action when ASN starts/stops 608 --- G3D.DLL fix attempt installed ok 608 --- All links checked okay 608 ------------------------------------------------------------------- 608 SimConnect_Open succeeded: waiting to check version okay 608 Trying to use SimConnect Acc/SP2 Oct07 608 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 608 Initialising SimConnect data requests now 608 FSUIPC Menu entry added 639 \\MISSIONRANCH\Users\dave\documents\flight simulator x files\Default Lauda gate 548.FLT 639 \\MISSIONRANCH\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.AIR 20810 System time = 07/01/2016 16:53:53, Simulator time = 16:53:31 (16:53Z) 21013 Aircraft="Boeing 737-800 Lauda Air" 21824 Starting everything now ... 21824 Using "C:\Program Files\GoFlight\GFDEV.DLL", version 2.2.6.0 21824 GoFlight GFMESM detected: 1 device 21824 LUA.0: beginning "H:\FSX\Modules\ipcReady.lua" 21824 LUA.0: ended "H:\FSX\Modules\ipcReady.lua" 21840 LUA.1: 21840 LUA.1: ************************** START ************************* 21840 LUA.1: [sTART]LINDA:: Loading... 21855 LUA.1: LINDA:: ---> ERROR:: [sTART] Main system config not found! Run GUI and check configs! 21980 Advanced Weather Interface Enabled 106876 Sim stopped: average frame rate for last 87 secs = 30.3 fps 106876 Average weather filter write interval in that time = 730.1 msecs 109855 Weather Mode now = Theme 109855 \\MISSIONRANCH\Users\Dave\AppData\Roaming\Microsoft\FSX\Previous flight.FLT 134691 System time = 07/01/2016 16:55:47, Simulator time = 16:53:30 (16:53Z) 134691 *** FSUIPC log file being closed Minimum frame rate was 29.2 fps, Maximum was 30.7 fps Minimum available memory recorded was 2394Mb Average frame rate for running time of 87 secs = 30.3 fps Average weather filter write interval in that time = 730.1 msecs G3D fix: Passes 12715, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 184 Allocs, 184 Freed ********* FSUIPC Log file closed ***********
  7. Hi Pete, Thanks for your response, My last update was 4,96 off the top of my head. I did a straight update to 4.4.949 after saving my ini file .
  8. Hello Pete Dowson. I have updated my FSUIPC to 4.4.949 Please could you have a look at the attached log to throw any light on the reason it now wont connect to Linda 2.6.7 software, which also I have just updated, which I use for my VRinsight MCP combo. Also none of my controls are working, although when I look at the FSUIPC. ini file they are all still there. Many thanks In advance edmundo.
  9. Edmundo

    Pete's Cockpit

    Excellent what a fantastic atchevement,
  10. Hi Andydigital, The problem was DLL.XML file permission, so the installer runs but I cant register, FSUIPC wont recognise my Product Key for registration. The error message says "Sorry, this key is not a valid 12 character" key I have Copied and pasted the key from the Modules folder a couple of times but still no good, any ideas please. Regards Dave
  11. Thank you for your reply, I have tried reinstalling FSUIPC this is the installer log I get Checking if there's already a version of FSUIPC4 installed in: H:\FSX\Modules\FSUIPC4.DLL ... Version 4.921f found. FSX Modules folder already exists. Okay -- installed FSUIPC4 into "H:\FSX\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\Dave\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Dave\AppData\Roaming" Found FSX.CFG in "C:\Users\Dave\AppData\Roaming\Microsoft\FSX\FSX.CFG" Now checking DLL.XML ... ... Couldn't open or create the DLL.XML file! Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\UpdatusUser\AppData\Roaming" ... No FSX.CFG there Cannot edit the DLL.XML file to activate FSUIPC. Hopefully this will throw some light on my problem Kind Regards Dave
  12. Hi Pete. I have Updated my FSUIPC to 4.92 and something has gone wrong, I am hopiing you will be able to help, below I have listed my install log, my ini file and log. Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... Looking in registry for ESP install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\ESP Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\Prepar3D v2 Parameter"AppPath" ... NOT found! ... =========================================================== INSTALLATION FOR FSX: SetupPath="H:\FSX\" Checking version of the FSX EXE: ... Version 10.0.61637.0 (Need at least 10.0.60905.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 61242 (SP1 May07) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: H:\FSX\Modules\FSUIPC4.DLL ... Version 4.900 found. FSX Modules folder already exists. Okay -- installed FSUIPC4 into "H:\FSX\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\Dave\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Dave\AppData\Roaming" Found FSX.CFG in "C:\Users\Dave\AppData\Roaming\Microsoft\FSX\FSX.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4_Loader section already exists but will be replaced. (with FSUIPC4_Loader entry) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\UpdatusUser\AppData\Roaming" ... No FSX.CFG there "Modules\FSUIPC Documents" folder already exists. Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay =========================================================== All installer tasks completed. Registration for FSUIPC4 and WideFS was successful! (result code 00) *************** End of Install Log *************** [General] UpdatedByVersion=4921f History=5Q42KMZJR7M4J781UJCXE InitDelayDevicesToo=No MouseWheelMove=Yes MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=Yes FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=Yes SuppressCloudTurbulence=No MaxIce=1 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=Yes SuppressWindVariance=Yes WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=Yes WindSmoothing=Yes WindSmoothness=1 WindSmoothAirborneOnly=Yes PressureSmoothness=20 TemperatureSmoothness=100 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=Yes RudderSpikeRemoval=Yes ElevatorSpikeRemoval=Yes AileronSpikeRemoval=Yes ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=Yes TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=Yes BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=Yes AxesWrongRange=No TCASid=Flight TCASrange=0 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No UseMidMouseBtn=Yes UseSystemTime=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Yoke 0.GUID={08D78000-3D34-11E1-8001-444553540000} 1=Saitek Pro Flight Quadrant 1.GUID={DD0A9050-1A02-11E2-8001-444553540000} [buttons] ButtonRepeat=20,10 1=P0,1,C65589,0 3=R1,8,C66080,0 4=U1,8,C66079,0 5=R1,6,C65602,0 15=R0,32,C65734,0 16=U0,32,C66416,-1 17=R0,33,C65856,0 18=U0,33,C66416,-1 19=R0,34,C65672,0 20=U0,34,C66416,-1 21=R0,35,C65857,0 22=U0,35,C66416,-1 23=R0,36,C65735,0 24=U0,36,C66416,-1 25=R0,37,C65855,0 26=U0,37,C66416,-1 27=R0,38,C65671,0 28=U0,38,C66416,-1 29=P0,39,C65854,0 30=U0,39,C66416,-1 31=P0,5,C65758,0 32=P0,4,C65759,0 33=R0,0,C65588,0 34=R0,2,C65607,0 35=R0,3,C65615,0 [MacroFiles] 1=767 2=iFly737 3=MADDOG2 [LuaFiles] 1=ipcReady 2=linda 3=DynamicFriction [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=H:\FSX\Sound\ Device1=Primary Sound Driver Device2=Speakers (Creative SB X-Fi) Device3=SPDIF Out (Creative SB X-Fi) [Window.LUA display] Docked=7352, 2723, 3549, 2475 [VRInsight] 1=com3 [Programs] Run1=HIDE,H:\FSX\FSX.bat [Axes] 0=0X,256,F,65763,0,0,0 1=0Y,256,F,65762,0,0,0 2=0Y,B,0,0,65683,0,65684,0 3=0V,256,F,65762,0,0,0 4=1X,256,F,65697,0,0,0 RangeRepeatRate=10 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No MapThrottle=Yes FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Throttle1=-16380,-512,512,16380 Aileron=-16191,-512,64,16096/8 Elevator=-16380,32,32,16380 [ClientNames] 1=KENSIKDRAGONFLY [Keys] 1=32,8,1127,0,1128,0 [Auto] 1=Lua Dynamicfriction ********* FSUIPC4, Version 4.921f by Pete Dowson ********* Running inside FSX on Windows 7 Module base=61170000 User Name="David Edmunds" User Addr="kimdaveedmunds@aol.com" FSUIPC4 Key is provided WideFS7 Key is provided 16 System time = 15/11/2013 22:44:51 16 FLT UNC path = "\\MISSIONRANCH\Users\Dave\Documents\Flight Simulator X Files\" 47 Trying to connect to SimConnect Acc/SP2 Oct07 ... 63 FS UNC path = "\\MISSIONRANCH\FSX\" 593 Run: "H:\FSX\FSX.bat" 593 LogOptions=00000000 00000001 593 SIM1 Frictions access gained 593 Wind smoothing fix is fully installed 593 G3D.DLL fix attempt installed ok 593 SimConnect_Open succeeded: waiting to check version okay 593 Trying to use SimConnect Acc/SP2 Oct07 593 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 593 Initialising SimConnect data requests now 593 FSUIPC Menu entry added 609 \\MISSIONRANCH\Users\dave\documents\flight simulator x files\Default Lauda gate 548.FLT 609 \\MISSIONRANCH\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.AIR 656 VRI port 1 "com3" opened 2356 VRI MCP2B ("MCP2 Boeing") detected on port com3 19844 System time = 15/11/2013 22:45:10, Simulator time = 22:44:50 (22:44Z) 20047 Aircraft="Boeing 737-800 Lauda Air" 20858 Starting everything now ... 20858 LUA.0: beginning "H:\FSX\Modules\ipcReady.lua" 20858 LUA.0: ended "H:\FSX\Modules\ipcReady.lua" 20873 LUA.1: 20873 LUA.1: [iNIT]LINDA:: Loading... 20951 LUA.1: LINDA:: Aircraft: Boeing 737-800 Lauda Air 20967 LUA.1: LINDA:: Aircraft module detected: FSX Default 20998 LUA.2: LINDA:: AivlaSoft library loaded... 21014 LUA.2: LINDA:: FSX standard library loaded... 21014 LUA.2: LINDA:: IAO library loaded... 21014 LUA.2: LINDA:: RealityXP library loaded... 21029 LUA.2: LINDA:: A2A MAP library loaded... 21029 Advanced Weather Interface Enabled 26536 LUA.2: LINDA:: Loading a fallback joysticks config... 26536 LUA.2: LINDA:: Loading FSX Default joysticks config... 26536 LUA.2: LINDA:: Module: FSX Default Started... 26552 LUA.2: LINDA:: Ready to go, Captain! 26552 LUA.2: LINDA:: 1009686 Sim stopped: average frame rate for last 953 secs = 30.3 fps 1009686 Average weather filter write interval in that time = 2006.9 msecs 1012931 Weather Mode now = Theme 1012931 \\MISSIONRANCH\Users\Dave\AppData\Roaming\Microsoft\FSX\Previous flight.FLT 1012946 LUA.1: LINDA:: Aircraft: Boeing 737-800 Lauda Air 1012946 LUA.1: LINDA:: Aircraft module detected: FSX Default 1012977 LUA.2: LINDA:: AivlaSoft library loaded... 1012977 LUA.2: LINDA:: FSX standard library loaded... 1012993 LUA.2: LINDA:: IAO library loaded... 1012993 LUA.2: LINDA:: RealityXP library loaded... 1012993 LUA.2: LINDA:: A2A MAP library loaded... 1018500 LUA.2: LINDA:: Loading a fallback joysticks config... 1018500 LUA.2: LINDA:: Loading FSX Default joysticks config... 1018515 LUA.2: LINDA:: Module: FSX Default Started... 1018515 LUA.2: LINDA:: Ready to go, Captain! 1018515 LUA.2: LINDA:: 1034896 System time = 15/11/2013 23:02:06, Simulator time = 22:44:49 (22:44Z) 1034896 *** FSUIPC log file being closed Average frame rate for running time of 963 secs = 30.3 fps Average weather filter write interval in that time = 2027.5 msecs G3D fix: Passes 11571, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 750 Allocs, 750 Freed ********* FSUIPC Log file closed *********** Hope fully you will be able to see if there is a problem with installation Kind Regards Dave
  13. Thank you -Pv-, I understand exactly what you are saying, Many Thanks, Dave
  14. Hi Pete, thank you for your reply," Yes I am English". However when I save the bat file to fsx it ends up in fsx above the fsx.exe file, when I tried to save it to fsx.exe I get a message asking me if I want to replace the fsx.exe, should I say yes to this, I am a little scared as this must be fsx application file and I dont want to mess everything up I have put Run1=HIDE,H:\FSX\FSX.bat into the FSUIPC ini file, H being the drive where FSX is on my PC. Again many thanks Pete, Dave.
  15. Hi Pete, How do I, "Set the FSUIPC to run the batch file automatically, edit the FSUIPC.ini and enter:". And do I insert the following into FSX.exe using notepad using notepad? Run1=HIDE,"E:\FSX\FSX.bat" (insert the link to your FSX.exe) I must appolagise for my lack of PC knowlage I am self taught, and lots still to learn, Many Thanks Dave
  16. Ok thanks Pete, Posted 31 May 2012 - 05:28 PM First of all, my thanks go to Günter (guenseli) and Ryan (Tabs) for this. Aero must be ENABLED before starting FSX for this tweak to work! It is about vsync fix for users who fly windowed. Now, in another thread, a tweak with half the refresh rate was posted for the users of full screen. The good news is, there is something new for windowed users too: While you won't be able to enjoy the smoothness of the half refresh rate FPS (60->30), you will be able to circumvent that stupid vsync behaviour in windowed mode where FSX is halving the FPS all the time. You can usually either get 60, then 30, then 20 then 15 I believe... if FPS drops below 30, it will drop to either 20 or 15. FSX disables Aero upon start (does anyone know why), thus making vsync function like described above (at refresh dividers). Now, if you restart the Desktop Windows Manager (dwm.exe, which then restarts the Aero after FSX has started), it will behave just like the standard full screen vsync. 30-29-28-27... First of all, to enable vsync in windowed, put this into FSX.cfg: [GRAPHICS] ForceWindowedVsync=1 Now, there are three ways to restart the DWM (Aero): DO NOT use this option, as it apparently messes up the EZCA functionality. 2) and 3) is working fine. 2) create a batch file containing: @echo off start "" "E:\FSX\FSX.exe" (insert the link to your FSX.exe) net stop uxsms net start uxsms and run it. FSX is going to start, Aero is going to get started after FSX, and voila... 3) elegant solution, through FSUIPC (only works with registered version): - create a batch file containing: net stop uxsms net start uxsms Set the FSUIPC to run the batch file automatically, edit the FSUIPC.ini and enter: [Programs] Run1=HIDE,"E:\FSX\FSX.bat" (insert the link to your FSX.exe) This solution is going to do everything silently. No CMD popup windows, only visible Aero activation. Important: If you come over ANY sign of trouble, please post. I didn't have much time to test this out, but a little tests I did, looked quite promising. Hopefully you can see this Pete, Thanks Dave
  17. Hi Pete, I have attached below an article about FSX and Aero, Please can you advise me how to use FSUIPC as described in the article I have attached, using more of an explanation how to do this using FSUIPC, Do I just edit FSUIPC.ini, with the two lines as explained on the attachment for the "elegant solution using a registered version" and If I need to put anything in the FSX.exe,and how do I go about it. I have the latest version of FSUIPC 4,86. Many Thanks in advance. Dave
  18. Hi Pete, I have removed the two flight plans you suggested and FSX starts up Brilliant, thank you for you Ouick reply, Dave
  19. Hi Pete. I have updated my FSUIPC to 4.86 and wide FS7, FSX now wont start Iwhen I click to start I just get a white screen saying fatal error, I tried putting the the Loader DLL and re running the the installer but FSX still wont run, Have you any ideas please Dave Edmunds ********* FSUIPC4, Version 4.86 by Pete Dowson ********* Running inside FSX on Windows 7 Module base=65C50000 User Name="David Edmunds" User Addr="kimdaveedmunds@aol.com" FSUIPC4 Key is provided WideFS7 Key is provided 15 System time = 01/03/2013 15:37:41 15 FLT UNC path = "\\MISSIONRANCH\Users\Dave\Documents\Flight Simulator X Files\" 47 Trying to connect to SimConnect Acc/SP2 Oct07 ... 47 FS UNC path = "\\MISSIONRANCH\FSX\" 390 LogOptions=00000000 00000001 390 SIM1 Frictions access gained 390 Wind smoothing fix is fully installed 390 G3D.DLL fix attempt installed ok 390 SimConnect_Open succeeded: waiting to check version okay 390 Trying to use SimConnect Acc/SP2 Oct07 405 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 405 Initialising SimConnect data requests now 405 FSUIPC Menu entry added 437 \\MISSIONRANCH\Users\dave\documents\flight simulator x files\Lauda air @ gate 548 Default.FLT 437 \\MISSIONRANCH\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.AIR 24149 C:\Users\Dave\Documents\Flight Simulator X Files\IFR Heathrow to Stevens Anchorage Intl.PLN 24149 Weather Mode now = Theme
  20. Thanks Pete, I have saved a copy of the ini file to my desktop, just in case, Regards Dave Edmunds
  21. Hi Pete, I have version 4.8 FSUIPC with Wide FS all working excellently with FSX/PMDG 747x. I have purchased a VRinsight mcp combo II panel, which I am told, I have to use Linda to set the combo panel up for use with PMDG 747, can I use linda to control only, alltitude, heading, flight director, auto pilot, auto throttle, Eifs controls, & vertical speed control, and leave everything else to FSUIPC. Also if you have any advice on setting up this it would be very much appreciated, as it took me a long time to set up FSUIPC and I dont want to upset it Kind Regards Dave Edmunds. System specs are attached
  22. I want run FSC 9.2 on my laptop and FSX on my desktop, I am having difficulty running the database manager ( ie cant find correct path to scenery files) I have followed the set up for network computers set files to read and write on both pc and laptop, I have on my desktop 2 drives, C drive is windows 7 64, and H drive is FSX. So I find my scenery folder in C\users\Name\appData\Roaming\Microsoft\Fsx\, Then I copy scenery.cfg. changing the name to scenerycfg.fsc into the FSX folder on my H drive where FSX is installed, is that correct? Now I have to create two network drives Please can this be explained because in the Appendix Network, instructions of the PDF files on the disc, it seems to only explain for windows XP or may be Vista, because I do not get the same pictures when I follow the instructions below , ( ie open my computer ( open the drive on which FSX is installed (right click on the folder containing FSX ( choose properties (choose card sharing (select share this folder on the network in network sharing and security (select allow network user to change my files etc etc I hope this makes sense edmundo FSX FSUIPC\ Wide FS Registered Database Manager Version 9.2 Net Build 15 May 2012 Windows 7 Prof 64 bit
  23. Thanks Pete, I have updated to 4.84, Disabled my conttroller in FS and set up everything through FSUIPC4. "which seems to be working excellenty", when I had the controller set through FS, I could view quickly around the 3D cockpit using the space bar and mouse, is there a way I can do this using FSUIPC, as its no longer available with the controller disconnected Kind Regards Dave
  24. Hi Pete I would like to set my throttle axis using FSUIPC, I use a Saitek pro flight yoke and 1 throttle lever for all four engines of my PMDG 747 400, Before I attempt this, do I need to delete the throttle Z axis in the settings menu of FSX. If I get on allright with the throttle I will set the ailerons & elevators through FSUIPC as well, and again do I need to delete the axis in the FSX settings, Appoliges for for being cautious but last time I attempted this it all went wrong, ie unable to get throttles to idle, kind Regards Dave Edmunds
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.