Jump to content
The simFlight Network Forums

mroschk

Members
 View Profile  See their activity

  • Posts

    168

  • Joined

  • Last visited

 Content Type 

Posts posted by mroschk

  2. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    12 minutes ago, John Dowson said:

    MSFS added radar/map capabilities in a recent update (SU9 or SU10 I think). These facilities are only available to WASM modules via the MapView API - see https://docs.flightsimulator.com/flighting/html/Programming_Tools/WASM/MapView_API/MapView_API.htm.

    Therefore it is quite possible for aircraft (and other WASM modules) to use this API to generate various map types. At some point, when time permits, I will look into this to see if I can make something available via the FSUIPC WASM module to support map file generation - and independently of Active Sky.

    John

    Hello "together"

    that sounds really good.

    I dont know if you know the Prosim Devs, but maybe you can give them the Tip with more Success then i had?

    Matthias

  3. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    For 1. I dont know exactly how it is done, i just read about this Workarround in the Prosim Forum from another user who find out how it works.
    You can find it by searching for Active Sky in the Prosim Forum.

    I really dont understand why Prosim is not willing to use MSFS's Weather Radar ??? I dont know...all is there, but they are not using it.

    For 2. Did not work here.
    Whatever control i set up in FSUIPC is overwritten by Prosim when i use Prosim in Simconnect Mode, which is the Mode to use by Prosim devs.

    Btw...latest Prosim Beta 3.23b2 has no Rudder functioning in Air at all here. Also the Lower Eicas did not show any deflection ( selecting SYS )

  5. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    you are only partially right.

    1. If you use Prosim in Simconnect mode, you will get a relativ accurate Radar Display i Prosim ND.

    2. Not correct. When you use Prosim in Simconnect Mode, then you have no chance to set up any Control ( Rudder/Tiller/Aileron/Elevator ) in FSUIPC, because Prosim overrides any input from FSUIPC.

    Matthias

    Ps.: But Pete, if you use Prosim too, did you ever tried a X-Wind T/O ?

  7. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi,

    thanks a lot if you can do something there !

    Yes, Active Sky v5 is not really compatible with MSFS, but i can ran it in the Background, it says still it is not connected, but when using Simconnect in Prosim it injects the Weather Radar in the ND.
    The Prosblem is, this Workaround did not work when i use FSUIPC Mode in Prosim, only when i use Simconnect Mode.

    But i want to use FSUIPC Mode because of the Rudder/Tiller issue in Prosim. So its a big Problem as you see, i can have a Weather Radar OR Rudder/Tiller working.
    But for my Homecockpit i have no other chance then using Prosim. But the developer of the Flightmodel which Prosim uses is not really up to date with the MSFS Changes.

    hmm...for me very annoying, but as i say...i have to use Prosim...no other SOftware available at the Moment.

    Matthias

  8. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Yes ok.

    Thanks for your help anyway....

    But a small other Question about FSUIPC, hope it is ok to ask here.
    I remember in the FSUIPC for P3D and Active Sky there was an entry in the FSUIPC.INI to set a Path for the radar.bin file.

    I made this entrie in the FSUIPC.INI for FSUIPC7, but no radar.bin is created.

    Is this no longer supported by FSUIPC7 and Active Sky v5 ?

    Matthias

  10. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    i test the Offsets of PFC.
    When i change the Offset for the PFC Tiller, only the Nose Wheel is controlled in MSFS...thats fine.
    But then i connect my Rudder Pedals to the PFC Offset for the Rudder and when i chnage this, also the Nose Wheel is controlled in MSFS,
    thats not what should happen and not what i am looking for.

    I really did not know what is going wrong here?

    In MSFS the Rudder combination under Assistance is off for sure, see pic above ( sorry my Sim is in German, but the Setting is at the same Position then in the english version 🙂 )

    Have you any ideas ?

    Thanks
    Matthias

  13. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hello again,

    i am trying to get my Tiller seperated from the Rudder Axis ( or visa versa 🙂 ), thats the Big Aim i have.

    For that i set up my Rudder Pedals and Tiller in FSUIPC.
    But when i use the Tiller on Ground or use the Rudder on Ground, i have for both the
    same deflection of the Nose Wheel.

    What could i do wrong ?

    In MSFS, the Autorudder is OFF, i check that already ( sorry ma MSFS is in German )

    Can anyone help please ?
    Matthias

    settings_tiller.jpg

    settings_rudder.jpg

    autorudder.jpg

    settings_1.jpg

  16. SIOC Axis to FSUIPC Axis ?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hello,

    i read about the SIOC Connection to FSUIPC.
    My Yoke in the Homecockpit is connected to a Opencockpits Mastercard Analog Input for Aileron and Elevator control.
    Now i am looking how i can connect this both Axis to FSUIPC and set it to the MSFS Aileron and Elevator Axis. ( using latest FSUIPC 7.3.15 and latest MSFS Beta )

    Any help would be really nice

    Thanks
    Matthias

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.