-
Posts
4,066 -
Joined
-
Last visited
-
Days Won
31
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by V. Heine
-
-
Hi Eytan,
download the current manual from our website (it's free) and read
chapter 5.5 Saving and loading flight plans and also chapter 20, Options Window, section Flight Plan.
Regards,
Volker
-
Hi Gohan,
this is not on our ToDo list.
Regards,
Volker
-
Hi cz,
no we can't. Please post your message here:
http://forum.navigraph.com/forum/default.aspx
Regards,
Volker
-
Hi,
the answer is NO.
I think that altitude is depending from ATC, Weather, Route, Airways and also Pilot's responsibility.
Regards,
Volker
-
Hi,
download also the current manual and read chapter 13.1 Operating modes, AutoHeading mode.
Regards,
Volker
-
Hi ?,
just close it, use the L Button.
Regards,
Volker
-
Hi Mike,
please post a screenshot about the situation you are describe here or send it to my e-mail adress which you find on our website.
Regards,
Volker
-
Hi Adam,
please contact me via my e-mail adress which you find on our Website.
Regards,
Volker
-
Hi Mike,
please read the following announcement:
http://forums.simflight.com/viewtopic.php?f=155&t=61464
and also the current manual, chapter 2, Database Manager, Page 11.
Regards,
Volker
-
Hi Adam,
I need also the BUILD: ,which you find on the introscreen or under About -> FSC Team...
Regards,
Volker
-
Hi,
next time please read our announcement:
Please read also the current manual, chapter 5.5 Saving and loading flight plans
and also chapter 20 Options Window, page 96 & 97.
Regards,
Volker
-
Hi,
on which drive the FSCommander installed is insignificant. Is crucial, that the FSC must installed under Vista as administrator.
See also: viewtopic.php?f=155&t=66110
On the installation of the FSUIPC we do not have influence. Is important, that the FSUIPC must also installed as Adminstrator.
Regards,
Volker
-
Hi ?,
the installation of the AiracCycle was written by Navigraph. Your situation cannot be verified.
Examine with the windows search function, where the files (for example) NDB.FSC and/or VOR.FSC on your PC were installed.
Regards,
Volker
-
Hi Jeff,
your situation cannot be verified. Does it work with the previous version FSC83?
Regards,
Volker
-
Hi Roland,
please read the current manual, chapter2, Page 8, "Note that FlightSim Commander used data..." .
How can we change the ILS'es data?
Regards,
Volker
-
Hi Gihan,
which flightplan format is the ac Flight 1 Super80 Pro are using?
Regards,
Volker
-
Hi Roland,
please read the current manual, http://www.fscommander.com/files/fscmanual_english.zip ,
chapter 5.5, Saving and loading flight plans, Page 51 -> 5.3.
Regards,
Volker
-
Hi Hani,
have receive your Log files.
You have done the wrong work.
Please read carefully the current manual, chapter 24, Appendix Network, Page 105 to 112.
In your case you have given access to the scenery folder and then you have mounted this folder.
That's wrong.
You must give access to the drive or to the Flightsimulator folder and then mount the whole drive
or the whole Flightsimulator folder.
That's the reason that you have doubble entry's and also that you have an
access error 75 (Run Time error 75" Path/File access error) with the DBManager Version 83.
Regards,
Volker
-
Hi Hani,
have receive your Log files.
You have done the wrong work.
Please read carefully the current manual, chapter 24, Appendix Network, Page 105 to 112.
In your case you have given access to the scenery folder and then you have mounted this folder.
That's wrong.
You must give access to the drive or to the Flightsimulator folder and then mount the whole drive
or the whole Flightsimulator folder.
That's the reason that you have doubble entry's and also that you have an
access error 75 (Run Time error 75" Path/File access error) with the DBManager Version 83.
Regards,
Volker
-
Hi,
in this case please send following file FSCDBM_FS10.LOG to my e-mail adress
which you find at the bottom on our homepage.
Regards,
Volker
-
Hi Hani,
to verify the problem please
run the DatabaseManager Verion 8.4 again and select the FS9.
After the errormessage is shown, go into the FSC folder and search for the file FSCDBM_FS09.LOG.
Rename this file to FSCDBM_FS09.LOG.84.
Now run the DatabaseManager version 8.3 which seem to work. Select again th FS9.
After running with no errormessage go into the FSC folder and search for the file FSCDBM_FS09.LOG.
Rename this file to FSCDBM_FS09.LOG.83.
Now send both files to my e-mail adress which you find at the bottom on our homepage.
Regards,
Volker
-
Hi Andreas,
we have verify the problem and will fix it with the next upgrade.
Meanwhile use this workaround:
Create the known waypoints of the SID manually by enter the waypoints in the input field Waypoints like
HW -> DV257 -> TOLTA -> WRB
Regards,
Volker
-
Hi Roland,
the map data are like it are. We can't edit them.
You can create your own Island by reading the current manual, chapter 7, User object, Page 58
Read also with an editor the description and example inside the file UserObj.TXT.
Regards,
Volker
-
Hi Pete,
a silly answer, what do you think about to read the current manual, download here:
http://www.fscommander.com/files/fscmanual_english.zip
and read chapter 9, page 61 editing..., adding..., delete... ?
Regards,
Volker
FS Commander - can't open the Help
in (Former) FS Commander Support Forum
Posted
Hi Jean-Claude,
FSCommander do not supported the Helpfile via Firefox.
Regards,
Volker