Peter K
-
Posts
142 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Peter K
-
-
Its been while since i have used the erj feel there products
I cant find a reference on how to hide the pilot yoke in the vc cabin.
I also cannot seem to find a click spot on the yoke to get rid of it which is covering most of the pfd
Can someone advise or point me to a reference
Peter
-
Ok...Pete.... Ill just leave those unchecked and use opus or some other wx program...
Glad we could narrow the issue down a bit
I will also send you the ini file
Thanks for all of your assistance.....
BTW... as always thanks for you continued support of your products and the community.
Pete
-
HI Pete
I am not sure exactly where to get the windows crash log ( maybe you can point me to it , using w7 ).... but i can report the following
I installed the later version 4.947
after removing the fsuipc files from the modules folder
I was then able to fly with p3d v3 for about 25 mins without a crash
a36 and mooney
I then shut down the sim and restarted
I flew for a while 10 min and then i went into the fsuipc program and did one simple thing
I checked under "clouds" allow "changes to fs wx program " .... maybe not the exact working but you know what i mean
I unpaused the sim and it crashed in 10 seconds
I restarted the sim and then it would crash in about 10 seconds
( generally i click on something and it crashes the sim )
I went back an unchecked the wx setting and it did not crash again
I was not sure if this was an actual issue so i uninstalled the fsuipc program reinstalled and went through it all again with exactly the same result
Maybe this helps
Here is the log
Reading options from "G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 7Module base=5E110000User Name="peter kofman"User Addr="pkofman@rogers.com"FSUIPC4 Key is providedWideFS7 Key is provided94 System time = 08/10/2015 10:40:17109 FLT UNC path = "\\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\"109 Trying G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll109 Found it: trying to connect109 FS UNC path = "\\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\"234 ---------------------- Joystick Device Scan -----------------------234 Product= Saitek X52 Flight Control System234 Manufacturer= Saitek234 Vendor=06A3, Product=075C (Version 1.0)234 Serial Number=234 Using existing joystick id: 0250 -------------------------------------------------------------------250 LogOptions=00000000 00000001250 -------------------------------------------------------------------250 ------ Setting the hooks and direct calls into the simulator ------250 --- CONTROLS timer memory location obtained ok250 --- SIM1 Frictions access gained250 --- FS Controls Table located ok250 --- Installed Mouse Macro hooks ok.250 --- Wind smoothing fix is installed250 --- All links checked okay250 -------------------------------------------------------------------250 SimConnect_Open succeeded: waiting to check version okay250 Trying to use SimConnect Prepar3D3853 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)3853 Initialising SimConnect data requests now3853 FSUIPC Menu entry added3884 \\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\ykz.fxml3884 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.air24523 System time = 08/10/2015 10:40:42, Simulator time = 08:15:37 (12:15Z)24539 Aircraft="Carenado A36 Bonanza Deep Green"25537 Starting everything now ...25678 Advanced Weather Interface Enabled56223 Weather Mode now = Theme74725 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Mooney_Acclaim\Mooney_Acclaim.air75037 Aircraft="Mooney Acclaim With G1000 4"152819 Sim stopped: average frame rate for last 77 secs = 31.9 fps152819 Average weather filter write interval in that time = 77111.0 msecs303297 Sim stopped: average frame rate for last 114 secs = 32.0 fpsHere is a log that was in the event log but not sure if it is what you are looking forLog Name: ApplicationSource: Application ErrorDate: 10/8/2015 10:39:56 AMEvent ID: 1000Task Category: (100)Level: ErrorKeywords: ClassicUser: N/AComputer: aviation-PCDescription:Faulting application name: Prepar3D.exe, version: 3.0.10.14945, time stamp: 0x560b4abeFaulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f7ce6Exception code: 0xc0000005Fault offset: 0x000182a4Faulting process id: 0x122cFaulting application start time: 0x01d101d6e15de03eFaulting application path: G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Prepar3D.exeFaulting module path: C:\Windows\system32\MSVCR120.dllReport Id: 71457d04-6dca-11e5-894b-60a44c6492d1Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><System><Provider Name="Application Error" /><EventID Qualifiers="0">1000</EventID><Level>2</Level><Task>100</Task><Keywords>0x80000000000000</Keywords><TimeCreated SystemTime="2015-10-08T14:39:56.000000000Z" /><EventRecordID>29051</EventRecordID><Channel>Application</Channel><Computer>aviation-PC</Computer><Security /></System><EventData><Data>Prepar3D.exe</Data><Data>3.0.10.14945</Data><Data>560b4abe</Data><Data>MSVCR120.dll</Data><Data>12.0.21005.1</Data><Data>524f7ce6</Data><Data>c0000005</Data><Data>000182a4</Data><Data>122c</Data><Data>01d101d6e15de03e</Data><Data>G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Prepar3D.exe</Data><Data>C:\Windows\system32\MSVCR120.dll</Data><Data>71457d04-6dca-11e5-894b-60a44c6492d1</Data></EventData></Event> -
The only other reports of crashes on loading have all turned out to be bad installations of P3D, especially ones which have been altered by migration tools. But I cannot guess anything. I need to see the FSUIPC4.LOG after such a crash, and the Windows crash data. It may even be a bad joystick driver.
You don't need to "run a log". FSUIPC always automatically makes a Log when it runs. And don't try sending anything. You'll need to paste the text into a message.
Pete
Pete here is the info requested... let me know if this is helpful or if you need to me to get additional info
I actually thought i had it working last night . I uninstalled and reinstalled the most recent v. of fsuipc
I ran for while and then i shut it off
I restarted p-v3 this morning and it crashed with the stock mooney acclaim
Here is the info i was able to extract from the log and windows error report
les that help describe the problem:
C:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.cfg.txtC:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\dxdiag.txtC:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\fdr.datC:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\DLL.XMLC:\Users\fsx\AppData\Local\Temp\WER19A7.tmp.WERInternalMetadata.xmlC:\Users\fsx\AppData\Local\Temp\WER2E51.tmp.appcompat.txtC:\Users\fsx\AppData\Local\Temp\WER517B.tmp.mdmpRead our privacy statement online:If the online privacy statement is not available, please read our privacy statement offline:fsuipc log********* FSUIPC4, Version 4.946b by Pete Dowson *********Reading options from "G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 7Module base=5B8B0000User Name="peter kofman"User Addr="pkofman@rogers.com"FSUIPC4 Key is providedWideFS7 Key is provided125 System time = 08/10/2015 08:24:41125 FLT UNC path = "\\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\"125 Trying G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll140 Found it: trying to connect140 FS UNC path = "\\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\"281 LogOptions=00000000 00000001281 -------------------------------------------------------------------281 ------ Setting the hooks and direct calls into the simulator ------281 --- CONTROLS timer memory location obtained ok281 --- SIM1 Frictions access gained281 --- FS Controls Table located ok281 --- Installed Mouse Macro hooks ok.281 --- Wind smoothing fix is installed281 --- All links checked okay281 -------------------------------------------------------------------281 SimConnect_Open succeeded: waiting to check version okay281 Trying to use SimConnect Prepar3D15288 Running in "Lockheed MartinÆ Prepar3DÆ v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)15288 Initialising SimConnect data requests now15288 FSUIPC Menu entry added15319 \\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\ykz.fxml15319 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.air80434 System time = 08/10/2015 08:26:01, Simulator time = 08:15:37 (12:15Z)80449 Aircraft="Carenado A36 Bonanza Deep Green"81463 Starting everything now ...82774 Advanced Weather Interface Enabled110433 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Mooney_Acclaim\Mooney_Acclaim.air110760 Aircraft="Mooney Acclaim With G1000 4" -
No ideas at all because there's no information here.
Is a Log produced? If so I need to see it. At what exact stage does it crash -- i.e. what is on the screen? What is the actual version number of FSUIPC (I always need this)? And please show me the Windows crash details from the Windows event viewer.
Also it might help to have a list of other add-ons you are running at the same time. It may be some clash. Have you tried stopping everything else BUT FSUIPC, just to be sure?
Pete
Ok .. thanks for the guidance. Ill round up some info and report back
what i can tell you so far is that im running FSUIPC4 4.946
I am running w7 x64 p3d v3
I have no add ons as of yet , stock p3dv3
I was waiting for fsuipc to be compatible with this p3d version
P3d v3 starts, I get the splash screen). I load a stock aircraft.
I experimented with different airports, aircraft , scenarios .. same result every time per below ( tried about 10 scenarios )
The program bar at the top immediatly after load goes to " not responding "
The in a about 5 sec's goes to " stopped due to a fatal error "
I removed the fsuipc dll and associated files in the modules folder, restarted and the program worked again with not further crashes.
I will run a log and send it.
Thank you
Pete
-
I installed the latest build from Pete D ( oct 4 )of fsuipc and my p3d v3 is crashing giving me a fatal error every time I start the program and load a flying "free flight "session
I get a " not responding " then a crash then a fatal error message
I deleted the fsuipc and all associated fsuipc files and the sim works again without crashing
Any ideas ???
my machine w7x64 p3d v3.0 ( fully licensed fsuipc)
Peter
-
Fonts
I find it very hard to read the fonts on the map in fsc . Is there a way to make the fonts larger/clearer
It is very hard to read the information in the pop up boxes when i place the cursor over a navaid or airport
Please advise / any ideas
Peter
-
Your correct, rc4 has a table you can edit for frequencies at each airport and so you can edit them if they are create incorrectly from makerunways etc.or if they change over time. You mentioned rc5 but i have not seen an update on its release for over a year. Last info was JD's blog blog of sept 09
I really only wanted to understand if there was some relationship between the frequency format that rc4 and fsuipc might use. . it was really a long shot as i like to try to understand what is going on between the various programs
Thanks again for your help
Pete
-
Really? RC has all its frequencies in its data files. MakeRunways generates these from your scenery, but I'm not sure offhand whether RC version 4 uses the frequency files it generates or not -- I know the future RC version 5 does, but I think RCV4 pre-dates that facility in MakeRunways. Probably it's frequency data is simply a little out of date. How do you define the "wrong frequency" in any case? When you look at the charts for airports there are so many alternatives for many of the ATC facilities that it could choose one which isn't included in the FS scenery data. It shouldn't matter provided you tune the one in you are told to, as in real life.
These days aircraft are equipped for closer spacing with their radios, and many control areas are using these new frequencies, but FS does not support the new spacing. The three digits in the true frequency for the old spacing are always abbreviated to two digits for FS as it's radios only accommodate such. So .x25 becomes .x2 and .x75 becomes .x7.
Both RC's files and those generated by MakeRunways are in plain text (actually comma-separated-variable (CSV) format, so displayable in tabular form by Excel), so you can always check them yourself and edit where you wish.
Regards
Pete
-
Thanks Peter
I thought i recalled that setting, thank god my memory is still working a little bit!
What I was trying to was see if there was some relationship between rc4.3 radio frequency selection and fsuipc. in fsx 4.6
Quite often rc4.3 will select the wrong frequency and i thought maybe i had the frequency pushed to xxx.xxx ( ie 3 digits after the decimal) hence not selecting the correct frequency.
Regardless this appears unrelated and nothing to do with fsuipc , and thanks for the response
Regards Peter
-
Perhaps I am not remembering this correctly but I think I can recall a box to check in fsuipc that changes the radio increments in fsuipc
Is my recollection correct
Not sure but i thought it was under the misc tab in fsuipc but I dont see it know in 4.6
Peter
-
HI
That did not work
I realized that the gps line in the menu is greyed out.
I cant even check it and the remember box is unchecked
Any other ideas??
-
Excellent ill try this , thank you Pete
-
FS Commander GPS windows
I have been using fs commander for a long time and really enjoy it but somewhere in the past week I lost the ability to bring up the gps little window
I check the gps window command from the menu bar and i get nothing.
The program seems to be working perfectly except for this.
Is there some setting that would turn it off?
It is not hidden under some other window!
I uninstalled fscommander and reinstalled and still no gps.
Thoughts.
fsc 8.6
w7x32
fsx sp2 accel
pkofman@rogers.com
Peter
-
Hi Pete
Thanks for the quick reply
What I meant was that I checked the box in fsuipc that makes the letters white in the scrolling toolbar. I think is under the misc tab
Regardless, Ill try to reinstall the video driver. I posted here because the actual fsx aircraft text seems ok. ( such as the text in the gauges, atc etc). So I just deduced that it might have something to do with fsuipc or an add-on.
I"ll try the video driver reinstall , that might be the best choice.
Best to you regards Peter
-
Hi Pete
Im having a new problem
Ive never seen this before.
My text is clipped and jumbled . This is the text that shows up in the scrolling display.
The actual msfsx aircraft and radio fonts seem fine.
Also The date text i.e ctl-z text is also not clear ( frame rates info and data)
I have not made and changes to my set up in a while, except I did update fsuipc recently to the latest version
I tried changing the text to white via fsuipc but I still cant really read it
I have made no other changes to my w7 x64 base setup for a long time either.
I dont know what has changed.
I see that there have been posts about similar issues but not exactly this issue
Thoughts??
Pete
fsx sp1 and accel.
-
Hey Pete
No malicous intent on my part here, sorry.
I was just looking for assistance.
Im not trying to withold anything!.
Peter
Peter Kofman P.Eng
416.315.9148
Install log , would not allow the file to be uploaded,
Installer for FSUIPC4.DLL version 4.57
Looking in registry for FSX install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
Parameter"SetupPath"
... >>> OK! FOUND FSX! <<< ...
Looking in registry for ESP install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0
Parameter"SetupPath"
Not there, so looking in:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft ESP\1.0
Parameter"AppPath"
... NOT found! ...
===========================================================
INSTALLATION FOR FSX:
AppPath="D:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"
Checking version of FSX.EXE:
... Version 10.0.61637.0 (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
Found SimConnect build 60905 (Original)
Found SimConnect build 61242 (SP1 May07)
Found SimConnect build 61259 (Acc/SP2 Oct07)
Checking if there's already a version of FSUIPC4 installed in:
D:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL
... Version 4.200 found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\pk.pk-PC\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\pk.pk-PC\AppData\Roaming"
Found FSX.CFG in "C:\Users\pk.pk-PC\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\pk.pk-PC\Application Data\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Contacts\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Cookies\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Desktop\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Documents\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Downloads\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Favorites\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Links\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Local Settings\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Music\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\My Documents\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\NetHood\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Pictures\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\PrintHood\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Recent\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Saved Games\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Searches\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\SendTo\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Start Menu\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Templates\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Tracing\Roaming"
No FSX.CFG there
Looking in "C:\Users\pk.pk-PC\Videos\Roaming"
No FSX.CFG there
Now installing additional files into the Modules folder:
Installed "FSUIPC4 User Guide.pdf" okay
Installed "FSUIPC4 for Advanced Users.pdf" okay
Installed "FSUIPC4 History.pdf" okay
Installed "List of FSX controls.pdf" okay
Installed "GlobalSign Root.exe" okay
Installed "FSUIPC Lua Library.pdf" okay
Installed "FSUIPC Lua Plug-Ins.pdf" okay
Installed "Lua License.pdf" okay
Installed "Example LUA plugins.zip" okay
FSUIPC4.DLL signature failed: trying GlobalSign Root fix ...
Problem! My signature check fails on the installed FSUIPC4.DLL. (Error ref 80092026)
Deleted GlobalSign Root fix programno longer relevant
===========================================================
All installer tasks completed okay!
Registration check for FSUIPC4 was successful! (result code 00)
*************** End of Install Log ***************
-
HI peter
Here is the exact fsuipc install error.
the program refuses to instal;
Quote,
FSUIPC Installer for FSX and ESP
" problem! My signature check fails on the installed FSUIPC4.dll. Please check that I am not listed as n Untrusted publisher in Internet explorer ( internet explorer options-content- publishers )
End quote.
Note i checked IE and you are not listed anywhere, Secondly IE is not the default browser.
Hope this helps
FSUIPC still will not install
-
peter
Your last line suggests that the error in the message i was receiving the initial message "explorer " changed. It has not. I was just trying to give you some more info,.
I will send whatever i can find later today
Best to you
peter
-
Peter
Thank you for the prompt reply
I am off to work so I will have to send you the requested info later today however I can tell give you a bit more info
Firstly,
Yes the entry in the tool bar is missing. I looked at the dll.xml file and the entry is somehow missing. I must have installed something recently that messed that up.
Secondly , I deleted every instance of fsuipc on the computer . ( perhaps silly of me!) but before i did that i reviewed the log of fsuipc and my information was present but i did not check the last access date.
Thirdly , When i reinstalled fsuipc,everything seemed to be going well but the installer would try to go to my c: drive and not my fsx installation which lives on my d: drive.
I could not determine how to point the program to my d: drive. The installation script gives errors that is cant find fsx in the c:\fsx.......
Your product has always been so well designed that ive never had any of these issues on installation before. Is there some simple way for me to tell the program where my fsx installation is living.
Thanks you again and i will send you my info later
Have a good day
Peter
-
Ive been using fsuipc for ages, i have registered versions of fsuipc and widefs
Im running fsx sp2 accel
im running w7 64 and the program was working perfectly until a day ago at which point it disappeared
I have downloaded the most recent fsuipc 4 becuase for some reason fsuipc has disappeared from my tool bar
I try to reinstall but it gives me some error about msinternet explorer perhpas blocking the signature
Firstly where did the program go. I can see fsuipc in the modules folder. I look in the fsuipc.ini file and i can see my name , lic etc.
Ive never had a problem but something has gone wrong and i cant reinstall.
Thoughts?
This is the version im trying to reinstall version 4.57
peter
-
Does anyone know what a error message #2 means
I get this everytime i try to connect fs commander to fsx.
Also is there a list of error messages somewhere?
Peter
-
I have been using fsnavigator for a long time and i think it is a great program. recently ( the past week ) i have been having ctd's every time i run fsnav. I have consistently crashed about half way though a flight . The only thing running is fs9.1 and fsnav.
I would like to do a complete uninstall, rerun my database and start again. How do i do a complete uninstall? and remove all of the registry scenery db etc,
or can i just reinstall, do i start with the old program and install updates etc.
Thank you in advance
Peter
-
Pete
I am still running 9.1 as well as fsx. so this is a 9.1 question
I am having trouble with the loading traffic dialogue. I use mytraffic 2006 and what is happening is that i am getting the "loading traffic diaologue endlessly" , fs presents a blue screen and the dialogue box ( itr happens at about 5 minutes intervals . Not very good for critical flight moments.
The folks at mytraffic 2006 suggest that I check with you to see if anything in fsuipc 3.7 would cause this. The mentioned that sometimes reload of winds ( or wind changes) can cause this. I have the fs wx set to real weather. and I turn off and clear wx in fsuipc.
Not sure if this is clear, but Im sure you would have some thoughts /ideas?
regards peter
e jest pilot steering yoke
in Airplanes
Posted
Is it possible to hide the pilot steering yoke in the e jet in the vc cockpit
It is in the way of the gauges
Please advise where the click spot is in the vc to hide it .
Thank you