Jump to content
The simFlight Network Forums

Peter K

Members
 View Profile  See their activity

  • Posts

    142

  • Joined

  • Last visited

 Content Type 

Posts posted by Peter K

  2. vc pilot yoke in erj e jets

    in Airplanes

    Posted

    Its been while since i have used the erj feel there products

    I cant find a reference on how to hide the pilot yoke in the vc cabin.

    I also cannot seem to find a click spot on the yoke  to get rid of it which is covering most of the  pfd

    Can someone advise or point me to a reference

    Peter

     

     

  4. p3d v3 crashing with fsuipc install

    in FSUIPC Support Pete Dowson Modules

    Posted

    HI Pete

    I am not sure exactly where to get the windows crash log ( maybe you can point me to it  , using w7 ).... but i can report the following 

    I installed the later version 4.947

    after removing  the fsuipc files from the modules folder

    I was then able to fly with p3d v3 for about 25 mins without a crash

    a36 and mooney

    I then shut down the sim and restarted

    I flew for a while 10 min and then i went into the fsuipc program and did one simple thing

    I checked under "clouds" allow "changes to fs wx program " .... maybe not the exact working but you know what i mean

    I unpaused the sim and it crashed in 10 seconds

    I restarted the sim and then it would crash in about 10 seconds

    ( generally i click on something and it crashes the sim )

    I went back an unchecked the wx setting and it did not crash again

     

    I was not sure if this was an actual issue so i uninstalled the fsuipc program reinstalled and went through it all again with exactly the same result

    Maybe this helps

     

    Here is the log

     

    Reading options from "G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
    Running inside Prepar3D v3 on Windows 7
    Module base=5E110000
    User Name="peter kofman"
    User Addr="pkofman@rogers.com"
    FSUIPC4 Key is provided
    WideFS7 Key is provided
           94 System time = 08/10/2015 10:40:17
          109 FLT UNC path = "\\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\"
          109 Trying G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
          109 Found it: trying to connect
          109 FS UNC path = "\\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\"
          234 ---------------------- Joystick Device Scan -----------------------
          234 Product= Saitek X52 Flight Control System
          234    Manufacturer= Saitek
          234    Vendor=06A3, Product=075C (Version 1.0)
          234    Serial Number= 
          234    Using existing joystick id:  0
          250 -------------------------------------------------------------------
          250 LogOptions=00000000 00000001
          250 -------------------------------------------------------------------
          250 ------ Setting the hooks and direct calls into the simulator ------
          250 --- CONTROLS timer memory location obtained ok
          250 --- SIM1 Frictions access gained
          250 --- FS Controls Table located ok
          250 --- Installed Mouse Macro hooks ok.
          250 --- Wind smoothing fix is installed
          250 --- All links checked okay
          250 -------------------------------------------------------------------
          250 SimConnect_Open succeeded: waiting to check version okay
          250 Trying to use SimConnect Prepar3D
         3853 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
         3853 Initialising SimConnect data requests now
         3853 FSUIPC Menu entry added
         3884 \\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\ykz.fxml
         3884 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.air
        24523 System time = 08/10/2015 10:40:42, Simulator time = 08:15:37 (12:15Z)
        24539 Aircraft="Carenado A36 Bonanza Deep Green"
        25537 Starting everything now ...
        25678 Advanced Weather Interface Enabled
        56223 Weather Mode now = Theme
        74725 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Mooney_Acclaim\Mooney_Acclaim.air
        75037 Aircraft="Mooney Acclaim With G1000 4"
       152819 Sim stopped: average frame rate for last 77 secs = 31.9 fps
       152819 Average weather filter write interval in that time = 77111.0 msecs
     
       303297 Sim stopped: average frame rate for last 114 secs = 32.0 fps
     
     
    Here is a log that was in the event log but not sure if it is what you are looking for
    Log Name:      Application
    Source:        Application Error
    Date:          10/8/2015 10:39:56 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      aviation-PC
    Description:
    Faulting application name: Prepar3D.exe, version: 3.0.10.14945, time stamp: 0x560b4abe
    Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f7ce6
    Exception code: 0xc0000005
    Fault offset: 0x000182a4
    Faulting process id: 0x122c
    Faulting application start time: 0x01d101d6e15de03e
    Faulting application path: G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Prepar3D.exe
    Faulting module path: C:\Windows\system32\MSVCR120.dll
    Report Id: 71457d04-6dca-11e5-894b-60a44c6492d1
    Event Xml:
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-10-08T14:39:56.000000000Z" />
        <EventRecordID>29051</EventRecordID>
        <Channel>Application</Channel>
        <Computer>aviation-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Prepar3D.exe</Data>
        <Data>3.0.10.14945</Data>
        <Data>560b4abe</Data>
        <Data>MSVCR120.dll</Data>
        <Data>12.0.21005.1</Data>
        <Data>524f7ce6</Data>
        <Data>c0000005</Data>
        <Data>000182a4</Data>
        <Data>122c</Data>
        <Data>01d101d6e15de03e</Data>
        <Data>G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Prepar3D.exe</Data>
        <Data>C:\Windows\system32\MSVCR120.dll</Data>
        <Data>71457d04-6dca-11e5-894b-60a44c6492d1</Data>
      </EventData>
    </Event>

  5. p3d v3 crashing with fsuipc install

    in FSUIPC Support Pete Dowson Modules

    Posted

    The only other reports of crashes on loading have all turned out to be bad installations of P3D, especially ones which have been altered by migration tools. But I cannot guess anything. I need to see the FSUIPC4.LOG after such a crash, and the Windows crash data. It may even be a bad joystick driver.

     

     

    You don't need to "run a log". FSUIPC always automatically makes a Log when it runs. And don't try sending anything. You'll need to paste the text into a message.

     

    Pete

     

    Pete here is the info requested... let me know if this is helpful or if you need to me to get additional info

    I actually thought i had it working last night . I uninstalled and reinstalled the most recent v. of fsuipc 

    I ran for while and then i shut it off

    I restarted p-v3 this morning and it crashed with the stock mooney acclaim

    Here is the info i was able to extract from the log and windows error report

     

    les that help describe the problem:

      C:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.cfg.txt
      C:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\dxdiag.txt
      C:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\fdr.dat
      C:\Users\fsx\AppData\Roaming\Lockheed Martin\Prepar3D v3\DLL.XML
      C:\Users\fsx\AppData\Local\Temp\WER19A7.tmp.WERInternalMetadata.xml
      C:\Users\fsx\AppData\Local\Temp\WER2E51.tmp.appcompat.txt
      C:\Users\fsx\AppData\Local\Temp\WER517B.tmp.mdmp
     
    Read our privacy statement online:
     
    If the online privacy statement is not available, please read our privacy statement offline:
     
     
     
     
    fsuipc log
     
     
    ********* FSUIPC4, Version 4.946b by Pete Dowson *********
    Reading options from "G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
    Running inside Prepar3D v3 on Windows 7
    Module base=5B8B0000
    User Name="peter kofman"
    User Addr="pkofman@rogers.com"
    FSUIPC4 Key is provided
    WideFS7 Key is provided
          125 System time = 08/10/2015 08:24:41
          125 FLT UNC path = "\\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\"
          125 Trying G:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
          140 Found it: trying to connect
          140 FS UNC path = "\\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\"
          281 LogOptions=00000000 00000001
          281 -------------------------------------------------------------------
          281 ------ Setting the hooks and direct calls into the simulator ------
          281 --- CONTROLS timer memory location obtained ok
          281 --- SIM1 Frictions access gained
          281 --- FS Controls Table located ok
          281 --- Installed Mouse Macro hooks ok.
          281 --- Wind smoothing fix is installed
          281 --- All links checked okay
          281 -------------------------------------------------------------------
          281 SimConnect_Open succeeded: waiting to check version okay
          281 Trying to use SimConnect Prepar3D
        15288 Running in "Lockheed MartinÆ Prepar3DÆ v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
        15288 Initialising SimConnect data requests now
        15288 FSUIPC Menu entry added
        15319 \\AVIATION-PC\fsx\Documents\Prepar3D v3 Files\ykz.fxml
        15319 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.air
        80434 System time = 08/10/2015 08:26:01, Simulator time = 08:15:37 (12:15Z)
        80449 Aircraft="Carenado A36 Bonanza Deep Green"
        81463 Starting everything now ...
        82774 Advanced Weather Interface Enabled
       110433 \\AVIATION-PC\G\Program Files (x86)\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Mooney_Acclaim\Mooney_Acclaim.air
       110760 Aircraft="Mooney Acclaim With G1000 4"

  6. p3d v3 crashing with fsuipc install

    in FSUIPC Support Pete Dowson Modules

    Posted

    No ideas at all because there's no information here.

     

    Is a Log produced? If so I need to see it. At what exact stage does it crash -- i.e. what is on the screen? What is the actual version number of FSUIPC (I always need this)? And please show me the Windows crash details from the Windows event viewer.

     

    Also it might help to have a list of other add-ons you are running at the same time. It may be some clash. Have you tried stopping everything else BUT FSUIPC, just to be sure?

     

    Pete

     

    Ok .. thanks for the guidance. Ill round up some info and report back

    what i can tell you so far is that im running FSUIPC4 4.946

    I am running w7 x64 p3d v3

    I have no add ons as of yet , stock p3dv3

    I was waiting for fsuipc to be compatible with this p3d version

    P3d v3 starts, I get the splash screen). I load a stock aircraft.

    I experimented with different airports, aircraft , scenarios .. same result every time per below ( tried about 10 scenarios )

    The program bar at the top immediatly after load goes to " not responding "

    The in a about 5 sec's goes to  " stopped due to a fatal error "

    I removed the fsuipc dll and associated files in the modules folder, restarted and the program worked again with not further crashes.

    I will run a log and send it.

    Thank you

     

    Pete

  7. p3d v3 crashing with fsuipc install

    in FSUIPC Support Pete Dowson Modules

    Posted

    I installed the latest build from Pete D  ( oct 4 )of fsuipc and my p3d v3 is crashing giving me a fatal error every time I start the program and load a flying "free flight "session

    I get a " not responding " then a crash then a fatal error message 

     

    I deleted the fsuipc and all associated fsuipc files and the sim works again without crashing

     

    Any ideas ???

    my machine   w7x64 p3d  v3.0 ( fully licensed fsuipc)

     

     

    Peter

  9. radio increment setting

    in FSUIPC Support Pete Dowson Modules

    Posted

    Your correct, rc4 has a table you can edit for frequencies at each airport and so you can edit them if they are create incorrectly from makerunways etc.or if they change over time. You mentioned rc5 but i have not seen an update on its release for over a year. Last info was JD's blog blog of sept 09

    I really only wanted to understand if there was some relationship between the frequency format that rc4 and fsuipc might use. . it was really a long shot as i like to try to understand what is going on between the various programs

    Thanks again for your help

    Pete

  10. radio increment setting

    in FSUIPC Support Pete Dowson Modules

    Posted

    Really? RC has all its frequencies in its data files. MakeRunways generates these from your scenery, but I'm not sure offhand whether RC version 4 uses the frequency files it generates or not -- I know the future RC version 5 does, but I think RCV4 pre-dates that facility in MakeRunways. Probably it's frequency data is simply a little out of date. How do you define the "wrong frequency" in any case? When you look at the charts for airports there are so many alternatives for many of the ATC facilities that it could choose one which isn't included in the FS scenery data. It shouldn't matter provided you tune the one in you are told to, as in real life.

    These days aircraft are equipped for closer spacing with their radios, and many control areas are using these new frequencies, but FS does not support the new spacing. The three digits in the true frequency for the old spacing are always abbreviated to two digits for FS as it's radios only accommodate such. So .x25 becomes .x2 and .x75 becomes .x7.

    Both RC's files and those generated by MakeRunways are in plain text (actually comma-separated-variable (CSV) format, so displayable in tabular form by Excel), so you can always check them yourself and edit where you wish.

    Regards

    Pete

  11. radio increment setting

    in FSUIPC Support Pete Dowson Modules

    Posted

    Thanks Peter

    I thought i recalled that setting, thank god my memory is still working a little bit!

    What I was trying to was see if there was some relationship between rc4.3 radio frequency selection and fsuipc. in fsx 4.6

    Quite often rc4.3 will select the wrong frequency and i thought maybe i had the frequency pushed to xxx.xxx ( ie 3 digits after the decimal) hence not selecting the correct frequency.

    Regardless this appears unrelated and nothing to do with fsuipc , and thanks for the response

    Regards Peter

    gps window

    in (Former) FS Commander Support Forum

    Posted

    FS Commander GPS windows

    I have been using fs commander for a long time and really enjoy it but somewhere in the past week I lost the ability to bring up the gps little window

    I check the gps window command from the menu bar and i get nothing.

    The program seems to be working perfectly except for this.

    Is there some setting that would turn it off?

    It is not hidden under some other window!

    I uninstalled fscommander and reinstalled and still no gps.

    Thoughts.

    fsc 8.6

    w7x32

    fsx sp2 accel

    pkofman@rogers.com

    Peter

  16. font and problem

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete

    Thanks for the quick reply

    What I meant was that I checked the box in fsuipc that makes the letters white in the scrolling toolbar. I think is under the misc tab

    Regardless, Ill try to reinstall the video driver. I posted here because the actual fsx aircraft text seems ok. ( such as the text in the gauges, atc etc). So I just deduced that it might have something to do with fsuipc or an add-on.

    I"ll try the video driver reinstall , that might be the best choice.

    Best to you regards Peter

  17. font and problem

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete

    Im having a new problem

    Ive never seen this before.

    My text is clipped and jumbled . This is the text that shows up in the scrolling display.

    The actual msfsx aircraft and radio fonts seem fine.

    Also The date text i.e ctl-z text is also not clear ( frame rates info and data)

    I have not made and changes to my set up in a while, except I did update fsuipc recently to the latest version

    I tried changing the text to white via fsuipc but I still cant really read it

    I have made no other changes to my w7 x64 base setup for a long time either.

    I dont know what has changed.

    I see that there have been posts about similar issues but not exactly this issue

    Thoughts??

    Pete

    fsx sp1 and accel.

  18. lost fsuipc

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hey Pete

    No malicous intent on my part here, sorry.

    I was just looking for assistance.

    Im not trying to withold anything!.

    Peter

    Peter Kofman P.Eng

    http://www.projectcore.com

    pkofman@rogers.com

    416.315.9148

    Install log , would not allow the file to be uploaded,

    Installer for FSUIPC4.DLL version 4.57

    Looking in registry for FSX install path:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0

    Parameter"SetupPath"

    ... >>> OK! FOUND FSX! <<< ...

    Looking in registry for ESP install path:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0

    Parameter"SetupPath"

    Not there, so looking in:

    HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft ESP\1.0

    Parameter"AppPath"

    ... NOT found! ...

    ===========================================================

    INSTALLATION FOR FSX:

    AppPath="D:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

    Checking version of FSX.EXE:

    ... Version 10.0.61637.0 (Need at least 10.0.60905.0)

    Checking compatibility with installed SimConnect:

    Found SimConnect build 60905 (Original)

    Found SimConnect build 61242 (SP1 May07)

    Found SimConnect build 61259 (Acc/SP2 Oct07)

    Checking if there's already a version of FSUIPC4 installed in:

    D:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL

    ... Version 4.200 found.

    FSX Modules folder already exists.

    Okay -- installed FSUIPC4 into "D:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"

    Looking for the current user's Application Data path:

    ... found as "C:\Users\pk.pk-PC\AppData\Roaming"

    Now finding \Microsoft\FSX\FSX.CFG for all users, including this one

    Looking in "C:\Users\pk.pk-PC\AppData\Roaming"

    Found FSX.CFG in "C:\Users\pk.pk-PC\AppData\Roaming\Microsoft\FSX\FSX.CFG"

    Now checking DLL.XML ...

    ... There is a previous DLL.XML, checking for FSUIPC4 section.

    ... FSUIPC4 section already exists but will be replaced.

    ... FSUIPC4 section of DLL.XML written okay

    Now checking for a SimConnect.XML file ...

    ... No SimConnect.XML file found. This is okay.

    Looking in "C:\Users\pk.pk-PC\Application Data\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Contacts\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Cookies\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Desktop\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Documents\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Downloads\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Favorites\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Links\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Local Settings\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Music\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\My Documents\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\NetHood\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Pictures\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\PrintHood\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Recent\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Saved Games\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Searches\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\SendTo\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Start Menu\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Templates\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Tracing\Roaming"

    No FSX.CFG there

    Looking in "C:\Users\pk.pk-PC\Videos\Roaming"

    No FSX.CFG there

    Now installing additional files into the Modules folder:

    Installed "FSUIPC4 User Guide.pdf" okay

    Installed "FSUIPC4 for Advanced Users.pdf" okay

    Installed "FSUIPC4 History.pdf" okay

    Installed "List of FSX controls.pdf" okay

    Installed "GlobalSign Root.exe" okay

    Installed "FSUIPC Lua Library.pdf" okay

    Installed "FSUIPC Lua Plug-Ins.pdf" okay

    Installed "Lua License.pdf" okay

    Installed "Example LUA plugins.zip" okay

    FSUIPC4.DLL signature failed: trying GlobalSign Root fix ...

    Problem! My signature check fails on the installed FSUIPC4.DLL. (Error ref 80092026)

    Deleted GlobalSign Root fix programno longer relevant

    ===========================================================

    All installer tasks completed okay!

    Registration check for FSUIPC4 was successful! (result code 00)

    *************** End of Install Log ***************

  19. lost fsuipc

    in FSUIPC Support Pete Dowson Modules

    Posted

    HI peter

    Here is the exact fsuipc install error.

    the program refuses to instal;

    Quote,

    FSUIPC Installer for FSX and ESP

    " problem! My signature check fails on the installed FSUIPC4.dll. Please check that I am not listed as n Untrusted publisher in Internet explorer ( internet explorer options-content- publishers )

    End quote.

    Note i checked IE and you are not listed anywhere, Secondly IE is not the default browser.

    Hope this helps

    FSUIPC still will not install

  21. lost fsuipc

    in FSUIPC Support Pete Dowson Modules

    Posted

    Peter

    Thank you for the prompt reply

    I am off to work so I will have to send you the requested info later today however I can tell give you a bit more info

    Firstly,

    Yes the entry in the tool bar is missing. I looked at the dll.xml file and the entry is somehow missing. I must have installed something recently that messed that up.

    Secondly , I deleted every instance of fsuipc on the computer . ( perhaps silly of me!) but before i did that i reviewed the log of fsuipc and my information was present but i did not check the last access date.

    Thirdly , When i reinstalled fsuipc,everything seemed to be going well but the installer would try to go to my c: drive and not my fsx installation which lives on my d: drive.

    I could not determine how to point the program to my d: drive. The installation script gives errors that is cant find fsx in the c:\fsx.......

    Your product has always been so well designed that ive never had any of these issues on installation before. Is there some simple way for me to tell the program where my fsx installation is living.

    Thanks you again and i will send you my info later

    Have a good day

    Peter

    pkofman@rogers.com

  22. lost fsuipc

    in FSUIPC Support Pete Dowson Modules

    Posted

    Ive been using fsuipc for ages, i have registered versions of fsuipc and widefs

    Im running fsx sp2 accel

    im running w7 64 and the program was working perfectly until a day ago at which point it disappeared

    I have downloaded the most recent fsuipc 4 becuase for some reason fsuipc has disappeared from my tool bar

    I try to reinstall but it gives me some error about msinternet explorer perhpas blocking the signature

    Firstly where did the program go. I can see fsuipc in the modules folder. I look in the fsuipc.ini file and i can see my name , lic etc.

    Ive never had a problem but something has gone wrong and i cant reinstall.

    Thoughts?

    This is the version im trying to reinstall version 4.57

    peter

    crash to desktop NEW!

    in FSNavigator Support Forum

    Posted

    I have been using fsnavigator for a long time and i think it is a great program. recently ( the past week ) i have been having ctd's every time i run fsnav. I have consistently crashed about half way though a flight . The only thing running is fs9.1 and fsnav.

    I would like to do a complete uninstall, rerun my database and start again. How do i do a complete uninstall? and remove all of the registry scenery db etc,

    or can i just reinstall, do i start with the old program and install updates etc.

    Thank you in advance

    Peter

  25. annoying problem with ai traffic,

    in FSUIPC Support Pete Dowson Modules

    Posted

    Pete

    I am still running 9.1 as well as fsx. so this is a 9.1 question

    I am having trouble with the loading traffic dialogue. I use mytraffic 2006 and what is happening is that i am getting the "loading traffic diaologue endlessly" , fs presents a blue screen and the dialogue box ( itr happens at about 5 minutes intervals . Not very good for critical flight moments.

    The folks at mytraffic 2006 suggest that I check with you to see if anything in fsuipc 3.7 would cause this. The mentioned that sometimes reload of winds ( or wind changes) can cause this. I have the fs wx set to real weather. and I turn off and clear wx in fsuipc.

    Not sure if this is clear, but Im sure you would have some thoughts /ideas?

    regards peter

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.