DJJose

I figured out what you meant, but no luck. Very little movement. The only time I get the trim to move is when I check the "control repeat while held." There has to be a combo that works.

Here's my .ini [Sounds] Device1=Primary Sound Driver Device2=Speakers (Creative SB X-Fi) Device3=SPDIF Out (Creative SB X-Fi) [General] UpdatedByVersion=7000b UseSystemTime=No JoystickTimeout=20 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No UseProfiles=Yes WideLuaGlobals=Yes InvokeFSUIPCOptionsKey=70,12 AxesWrongRange=No TCASid=Flight TCASrange=40,3 AxisCalibration=No DirectAxesToCalibs=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 LogOptionProtect=Yes AutoConnectToSim=Yes AutoExitWithSim=Yes TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 TrafficStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 ComReadLoopTime=20 Window=182,182,682,282 Console=No ConsoleWindowTopMost=No ConsoleWindow=26,26,1019,545 [JoyNames] 0=GoFlight GF-TQ6 Throttle System 0.GUID={392AC620-DFE9-11EA-8001-444553540000} 1=4-axis, 4-button joystick w/view finder 1.GUID={392D1010-DFE9-11EA-800D-444553540000} 2=4-axis, 4-button joystick 2.GUID={392D1010-DFE9-11EA-800E-444553540000} A=GoFlight GF-TQ6 Throttle System A.GUID={392AC620-DFE9-11EA-8001-444553540000} B=4-axis, 4-button joystick w/view finder B.GUID={392D1010-DFE9-11EA-800D-444553540000} C=4-axis, 4-button joystick C.GUID={392D1010-DFE9-11EA-800E-444553540000} [JoystickCalibration] RudderBlendLowest=1 AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 MapThrottle=Yes Aileron=-16380,512,936,16380 SlopeAileron=10 Elevator=-16380,0,512,16380 SlopeElevator=15 Rudder=-15018,-512,512,16042 SlopeRudder=15 [Axes] PollInterval=10 RangeRepeatRate=10 0=AR,256,D,6,0,0,0 -{ DIRECT: Mixture }- 1=AU,256,D,4,0,0,0 -{ DIRECT: Throttle }- 2=AV,256,D,5,0,0,0 -{ DIRECT: PropPitch }- 3=BX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 4=BY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 5=CR,256,D,3,0,0,0 -{ DIRECT: Rudder }- [Buttons] PollInterval=25 ButtonRepeat=20,10 1=P165,2,C65759,0 -{FLAPS_DECR}- 2=P165,1,C65758,0 -{FLAPS_INCR}- 6=R165,0,C66079,0 -{GEAR_UP}- 8=P165,4,C0,0 -{Custom control: <0>}- 9=PC,3,C65721,0 -{BRAKES_RIGHT}- 10=PC,2,C65720,0 -{BRAKES_LEFT}- 11=U165,0,C66080,0 -{GEAR_DOWN}- 13=P165,5,C65607,0 -{ELEV_TRIM_DN}- 14=P165,6,C65615,0 -{ELEV_TRIM_UP}- [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes [Profile.c172] 1=Cessna Skyhawk Asobo

I'm having trouble figuring this suggestion: Please explain.

YES! It does not recognize the Elevator trim on the GoFlight LGT as an axis. As I tried to explain, and please forgive me if I did not do a good job, the way that the trim is being recognized is only as 2 buttons wheel up & 2 buttons wheel down. The way I set it up: The two buttons for wheel up are set to "trim down." The two buttons for wheel down are set to "trim up." Sent to FSUIPC. It works, but the elevator trim wheel in the airplane barely moves. I'd like to see it move a little more when I move the GoFlight trim wheel.

John, This worked. I now have a properly working gear handle. I'm not able to get the elevator trim to speed up a little. I tried setting it up as an AXIS, but FSUIPC does not pick it up. "Did you try the checkbox 'control to repeat while held' in the buttons/switches assignment dialog?" I tried the above suggestion but if I try to trim up it continues and it will not stop. Any suggestions?

GoFlight is currently closed due to COVID-19. Let's hope that they update the software when they get back to work. For now if anyone has any info on how to get the GoFlight modules to work with FSUIPC/GFDdevESP.exe, I'd appreciate some guidance. For now all I care about is my throttle and LGT. Throttle already works. LGT is next.

Yes it is. I'll try your suggestions and post results. Best regards.

Absolutely! The problem I was having is that FSUIPC was not recognizing my Elevator, Aileron, Rudder or Throttle AXIS. I had to keep pressing reload and moving from sensitivity window back to AXIS window in order to get them to show. I don't think it was ever this unresponsive with my payware FSX version. Once it picked up the axis it was easy to pick the command from the drop down menu and even set sensitivity.

Hi John, Thank you so much for helping me The GoFlight LGT has an elevator trim only, Landing Gear handle, and flaps. The way I tried to set it up was by assigning buttons. Right now the flaps are working perfectly. Incremental down/up. The Gear only has one button that shows up in FSUIPC. When you put the lever up it calls up a button. When you put the gear down, no button shows up. So right now I set it with one button. Gear up works for both gear up and down. Example Mooney: gear goes up when I initially bring the gear up. To bring the gear back down, I first put the gear down, then back up, then back down. The same with the trim. The two buttons that show up for trim up & trim down are set as trim up & down. The wheel moves the trim but very slowly. I have not tried using an axis. I'm assuming that I assign the trim wheel the way I assigned the yoke? I'd also like to trim up and trim down and repeat the action so that it happens faster, but that's what I need to learn how to do. Lastly, is there a way to get the lights to show on the GoFlight LGT? Jose

Got it working. It took some time but it was able to detect the levers. I even got my yoke & pedals working.

For some reason I'm not able to set up the throttle. When I press rescan and move lever it will not show up. It shows up fine in win controllers and only one lever works in MSFS. I was hoping I could get all 6 levers working with FSUIPC. Any ideas? Thanks. Jose

Hi John, Can you please help me with setting up my GoFlight LGT. First, THANK YOU for updating FSUIPC. I have my LGT recognized and managed to set up flaps up and down. No problem there. The trim wheel I set up as trim down and trim up, but it barely moves. How do I make it move a little faster or move a little more? Gear Up is the only button that is showing up. No gear down button. I was hoping there's a way to get the gear to go down when I put the lever down. Thanks for your help. Jose