Jump to content
The simFlight Network Forums

Connectivity problems


Recommended Posts

Pete,

Hope you can help - over the last few days I have been experiencing wierd behaviour between my thrre PC's running FS & Project Magenta. Basically, the CDU and MCP appear to loose control of the A/C and the speed & altitude then flucuates wilfly on the PFD.

Enrico thinks the problem is probably coming from FS and I have checked the FSUIPC & WideFS logs and have come up with the following (from WideFS)

********* WideServer.DLL Log [version 6.47] *********

Blocksize guide = 4096 (double allowed)

Date (dmy): 02/11/05, Time 15:31:57.078: Server name is P4

54204 Initialising TCP/IP server

54204 Initialising IPX/SPX server

54219 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family

54219 Failed to start IPX/SPX Server

58329 Incoming connection Accepted ok (skt=388)

58407 Connected to computer "XEON" running WideClient version 6.470 (skt=388)

63844 Incoming connection Accepted ok (skt=532)

63922 Connected to computer "CELERON" running WideClient version 6.470 (skt=532)

63922 **** ERROR! Sumcheck or length fails on received socket 532 block, len=184 (time=0)

67875 **** ERROR! Sumcheck or length fails on received socket 388 block, len=25 (time=32203)

423344 **** ERROR! Sumcheck or length fails on received socket 388 block, len=43 (time=0)

1278282 **** ERROR! Sumcheck or length fails on received socket 388 block, len=67 (time=1242640)

1634079 Closing down now ...

Memory managed: Offset records: 294 alloc, 294 free

Total number of received blocks having sumcheck errors = 4

Throughput maximum achieved: 72 frames/sec, 13678 bytes/sec

Throughput average achieved for complete session: 24 frames/sec, 4146 bytes/sec

Average receive rate from "XEON": 2 frames/sec, 163 bytes/sec

Average receive rate from "CELERON": 4 frames/sec, 408 bytes/sec

********* Log file closed *********

********* WideClient Log [version 6.47] Class=FS98MAIN *********

Date (dmy): 02/11/05, Time 15:31:33.000: Client name is XEON

687 Attempting to connect now

1672 Trying TCP/IP host "P4" port 8002 ...

1672Okay, IP Address = 192.168.52.7

6172 New Client Application: "pmSounds" (Id=1328)

7718 New Client Application: "cdu" (Id=1260)

14984 New Client Application: "pfd" (Id=1396)

22672 Error on client pre-Connection Select() [Error=10060] Connection timed out

22687 Ready to try connection again

22718 Attempting to connect now

22734 Connection made okay!

82312 Error on send() of 25 bytes [Error=10014] Bad address

1598468 Error on client post-Connection Select() [Error=10053] Software caused connection abort

1598468 Connection closed by server!

1598468 The connection was terminated due to a time-out or other failure!

1598484 Ready to try connection again

1598484 Attempting to connect now

1598968 WRITESTATEDATA received with bad data size!

1598968 0 ReadLocal: Offset=2400000, Size=20000

2009000 0 ReadLocal: Offset=2400000, Size=20000

2096484 0 ReadLocal: Offset=2400000, Size=20000

*****************************************************

There is obviously something going wrong here as there are error messages - can you give me some idea what to look for here.

Many thanks

David

Link to comment
Share on other sites

Enrico thinks the problem is probably coming from FS and I have checked the FSUIPC & WideFS logs and have come up with the following (from WideFS)

The problem is almost undoubtedly the network. Something is failing, but whether it is one of your network cards, the cabling, or the drivers I couldn't say. You would ned to try replacing/checking each in turn. Another possibility is that the video card is sharing IRQs with the Network card -- maybe moving the latter to a different slot may help.

The tell tale entries in the Log are:

63922 **** ERROR! Sumcheck or length fails on received socket 532 block, len=184 (time=0)

67875 **** ERROR! Sumcheck or length fails on received socket 388 block, len=25 (time=32203)

423344 **** ERROR! Sumcheck or length fails on received socket 388 block, len=43 (time=0)

1278282 **** ERROR! Sumcheck or length fails on received socket 388 block, len=67 (time=1242640)

Whilst there are not many of these, the fact that they occur at all is worrying. They are also occurring on different sockets, so the prime suspect is most likely to be associated with the Server PC.

The following errors, on the Client, are, however, evidence of something going wrong with an application on that client. These are nothing to do with the Network, though I suppose it is just possible that bad data caused by Network problems may cause the applications to go wrong too.

1598968 WRITESTATEDATA received with bad data size!

1598968 0 ReadLocal: Offset=2400000, Size=20000

2009000 0 ReadLocal: Offset=2400000, Size=20000

2096484 0 ReadLocal: Offset=2400000, Size=20000

I notice you are using an out-of-date and unsupported version of WideFS still. If you do need further help it would be best if you updated your software first. Possibly FSUIPC too if it is earlier than 3.50.

Regards,

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.