Problem to run Wide FS

[hupeter]

Hi Pete Dawson,

I need some help for running Wide FS with FS 9

I have FSUIPC Version 3.75 registered Version

and

Wide FS6 registered Version.

Computers are running Window XP.

The following LOG's might be helpful for you to solve the problem.

********* FSUIPC, Version 3.75 by Pete Dowson *********

Running on Windows Version 5.1 Build 2600 Service Pack 2

Verifying Certificate for "G:\Flight Simulator 9\MODULES\FSUIPC.dll" now ...

SUCCESS! Signature verifies okay!

Running inside FS2004(original release)

User Name="Peter Huch"

User Addr="hupeter24@hotmail.com"

FSUIPC Key is provided

WideFS Key is provided

Module base=61000000

ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E

WeatherOptions(Orig)=40003605[40003605]

InitDelay: 0 seconds

WeatherReadInterval=4

LogOptions=00000001

DebugStatus=255

3406 System time = 18:32:08

3406 G:\Flight Simulator 9\

3422 System time = 18:32:08, FS2004 time = 12:00:00 (00:00Z)

27547 FLIGHTS\OTHER\FLTSIM.flt

27625 AIRCRAFT\c172\Cessna172SP.air

27937 Aircraft="Cessna Skyhawk 172SP"

57547 C:\Documents and Settings\Peter Huch\My Documents\Flight Simulator Files\UI generated flight.flt

57687 Clear All Weather requested: external weather discarded

71078 Advanced Weather Interface Enabled

71078 Traffic File #15 = "scenery\world\scenery\traffic030528"

89515 WeatherOptions set, now 40003605 (timer=0)

********* WideServer.DLL Log [version 6.75] *********

Blocksize guide = 4096 (double allowed)

Date (dmy): 05/12/07, Time 18:08:11.390: Server name is ACER2

86063 WideFS cannot be used until it is Registered through FSUIPC (version 3.44 or later)

1385578 Closing down now ...

Memory managed: Offset records: 0 alloc, 0 free

Read buffer usage: 0 alloc, 0 free, max in session: 0

Write buffer usage: 0 alloc, 0 free, max in session: 0

Throughput maximum achieved: 0 frames/sec, 0 bytes/sec

Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec

********* Log file closed *********

********* WideServer.DLL Log [version 6.75] *********

Blocksize guide = 4096 (double allowed)

Date (dmy): 05/12/07, Time 18:32:09.312: Server name is ACER2

72015 Initialising TCP/IP server

72031 Initialising IPX/SPX server

72031 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family

72031 Failed to start IPX/SPX Server

72031 Initialising UDP/IP server

72078 Broadcasting service every 1000 mSecs

85546 Restarting service due to total lack of use

85546 Failed to start IPX/SPX Server

Thanks for your assistance.

Peter Huch

[Pete Dowson]

I need some help for running Wide FS with FS 9

I have FSUIPC Version 3.75 registered Version

That's very much out of date now, and unsupported. You should be using Version 3.80.

and Wide FS6 registered Version.

Well, not according to the first Log. didn't you see this:

86063 WideFS cannot be used until it is Registered through FSUIPC (version 3.44 or later)

I know the FSUIPC log says you have a key, as for FSUIPC, but since that log was incomplete (you did not close FS before using it), I cannot tell even if your FSUIPC key is valid. Please never supply logs until everything is closed down. There is always important information in the final closing lines.

Something is wrong, if not with the Key(s) then instead maybe with your system's date. WideServer reports it as 05/12/07. Is that when you ran FS for these logs? If not, why is the system date set so? Have you perhaps had a crash or had your motherboard battery changed recently? If the data in your PC precedes the date you registered either FSUIPC or WideFS, then the related key won't be valid.

The second WideServer log shows things okay, though yet again it is incomplete, so it isn't much use. Could that log be after you actually entered your registration? Why supply two WideServer logs and yet no WideClient log, when the latter is probably more relevant?

Please check these things. Update your FSUIPC, and try again. And check the WideClient log, as the answer is there -- there's nothing shown wrong with the Server end, assuming you have a correct Registration and system date. Above all please always close down FS and Wideclient before showing logs.

Regards

Pete