Camtech Posted February 9, 2009 Report Posted February 9, 2009 Hello Mr. Dobson it has been awhile that i have used widefs , and im having problems connecting. first here is my log . this is what im reading from the main computer log ******** WideServer.DLL Log [version 6.78] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 09/02/09, Time 09:55:29.281: Server name is THERMALTAKE 85562 Initialising TCP/IP server 85578 Initialising IPX/SPX server 85578 IPX/SPX socket() failed [Error=10044] Socket type not supported 85578 Failed to start IPX/SPX Server 85578 Initialising UDP/IP server 86234 Broadcasting service every 1000 mSecs 96922 Restarting service due to total lack of use 96922 Failed to start IPX/SPX Server 418969 Closing down now ... Memory managed: Offset records: 0 alloc, 0 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* this is the log from the client computer. ********* WideClient Log [version 6.78] Class=FS98MAIN ********* Date (dmy): 09/02/09, Time 09:55:01.930: Client name is ROBERTCAMPBELL 203 Attempting to connect now 1201 Trying to locate server: Need details from Server Broadcast 1201 Failed to connect: waiting to try again 3214 Attempting to connect now 4742 New Client Application: "AS2004" (Id=3512) 67751 Trying to locate server: Need details from Server Broadcast what do you think i need to do to get it up. im runnig fs9 on the main com , and i have radar contact and active sky on my second computer. what am i doing wrong......Thanks..........Robert
Pete Dowson Posted February 9, 2009 Report Posted February 9, 2009 Hello Mr. Dobson It's Dowson, actually, but most call me Pete. ********* WideClient Log [version 6.78] Class=FS98MAIN *********Date (dmy): 09/02/09, Time 09:55:01.930: Client name is ROBERTCAMPBELL 203 Attempting to connect now 1201 Trying to locate server: Need details from Server Broadcast Your client isn't receiving broadcasts from your Server. That could be because they are in different Workgroups -- that's the usual reason. If you don't want to make the workgroup names the same you must use the ServerName= and Protocol= parameters in the WideClient.INI file to tell WideClient where to connect. Please see the documentation supplied. Regards Pete
Camtech Posted February 9, 2009 Author Report Posted February 9, 2009 Thanks for the reply and sorry for the error in your name . im still must be doing somthing wrong . im not for sure on work group names so i went in and set them up. as far a work group names i name then the same on both computers. (camtech). hers is the log on the client com. ********* WideClient Log [version 6.78] Class=FS98MAIN ********* Date (dmy): 09/02/09, Time 13:25:26.080: Client name is CAMTECH 172 Attempting to connect now 172 Trying TCP/IP host "camtech" port 8002 ... 172Okay, IP Address = 192.168.2.3 1186 Error on client pre-Connection Select() [Error=10061] Connection refused 1217 Ready to try connection again 2247 Attempting to connect now 13182 New Client Application: "AS2004" (Id=2364) 61933 Trying TCP/IP host "camtech" port 8002 ... 61933Okay, IP Address = 192.168.2.3 here is the log on the main com. ' ********* WideServer.DLL Log [version 6.78] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 09/02/09, Time 13:18:03.750: Server name is CAMTECH 86906 Initialising TCP/IP server 86922 Initialising IPX/SPX server 86922 IPX/SPX socket() failed [Error=10044] Socket type not supported 86922 Failed to start IPX/SPX Server 86922 Initialising UDP/IP server 88469 Broadcasting service every 1000 mSecs 98062 Restarting service due to total lack of use 98062 Failed to start IPX/SPX Server 655797 Closing down now ... Memory managed: Offset records: 0 alloc, 0 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* so at this moment im confused on where to go or what to do. i did as your instructions said to do. servername = camtech protocol=TCP that did not work so i tried the ips address. the problem with that is im not for sure where to get that from. Thanks again.....Robert
Pete Dowson Posted February 9, 2009 Report Posted February 9, 2009 im not for sure on work group names so i went in and set them up. as far a work group names i name then the same on both computers. (camtech). hers is the log on the client com. Well, you have named both the Server PC and the Client PC "camtech"!!! Each PC must have a unique NAME! How else can they be identified? You've now told WideClient to connect to a WideServer on the same PC as itself: ********* WideClient Log [version 6.78] Class=FS98MAIN *********Date (dmy): 09/02/09, Time 13:25:26.080: Client name is CAMTECH 172 Attempting to connect now 172 Trying TCP/IP host "camtech" port 8002 ... 172Okay, IP Address = 192.168.2.3 All PCs you want to work together should normally be in the same workgroup. But EVERY PC needs a unique name! Looks again at where you set the name. There's a workgroup name too. See it? Change that to be the same, change your PC names to be unique! Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now