Jump to content
The simFlight Network Forums

Setting up profiles for Level D 767


Recommended Posts

Hi Peter i have just recently overhauled my fs setup and settings I have now switched from specfic a/c to profiles. Now for the most pasrt all is well all the a/c I use have been set up ok. Even Level D except for 1 a/c that uses DXt txtures it will not accept any Level D profile at all I have gone into the ini file and copied and paste the verious settings I have even made up a new profile for the DXT a/c but to no avil. I have the lastest version of FSUIPC. Any thoughts?

Here is a copied of my ini file

Craig

[JoyNames]

AutoAssignLetters=No

0=GoFlight GF-TQ6 Throttle System

1=CH PRO PEDALS USB 2=CH FLIGHT SIM YOKE USB

[General]

UpdatedByVersion=3900

WindSmoothing=No

AutoTaxiWind=No

PropTaxiWind=No

TimeSetMode=Partial

WhiteMessages=No

ThrottleSyncAll=No

GraduatedVisibility=No

LowerVisAltitude=0

UpperVisAltitude=25000

UpperVisibility=6000

GenerateCirrus=Yes

WindShearSharp=No

UpperWindGusts=No

ExtendMetarMaxVis=Yes

CorrectVSsign=Yes

MouseWheelTrim=No

MouseWheelTrimSpeed=1

AxisInterceptIfDirect=No

DisconnTrimForAP=No

ZeroElevForAPAlt=No

AutoClearWeather=Yes

ExtendTopWind=Yes

WindSmoothness=5

SmoothPressure=No

PressureSmoothness=5

SmoothVisibility=No

VisibilitySmoothness=2

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

MinimumVisibility=0

MaximumVisibilityFewClouds=0

MaximumVisibility=0

MaximumVisibilityOvercast=0

MaximumVisibilityRainy=0

OneCloudLayer=No

ThinClouds=No

ThinThunderClouds=No

CloudThinness=1000

ThunderCloudThinness=10000

CloudTurbulence=No

CloudIcing=No

WindTurbulence=No

SuppressAllGusts=No

ExternalOptionControl=Yes

AutoTuneADF=No

KeepFS98CloudCover=No

ShowPMcontrols=No

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

StopAutoFuel=No

TrapUserInterrupt=Yes

NavFreq50KHz=No

ClockSync=No

SmoothIAS=Yes

SetVisUpperAlt=No

VisUpperAltLimit=6000

MaxIce=3

MinIce=-1

WindSmoothingDelay=0

WindSmoothAirborneOnly=No

LimitWindVariance=No

VisSmoothingDelay=0

VisSmoothAirborneOnly=No

TrafficControlDirect=Yes

SuppressCloudTurbulence=No

SuppressWindTurbulence=No

SpoilerIncrement=512

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

TCASid=Flight

TCASrange=40

TrafficScanPerFrame=10

AxisCalibration=No

CentredDialogue=Yes

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

ClearWeatherDynamics=Yes

OwnWeatherChanges=No

FixWindows=No

FixControlAccel=No

WeatherReadInterval=4

MoveBGLvariables=Yes

TimeForSelect=4

WeatherReadsFast=No

MainMenu=&Modules

SubMenu=&FSUIPC ...

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=0

RudderTrimControl=0

CowlFlaps1Control=0

CowlFlaps2Control=0

CowlFlaps3Control=0

CowlFlaps4Control=0

MaxSteerSpeed=60

Spoilers=-16380,16380/16

Flaps=-16384,16380/16

[buttons]

ButtonRepeat=20,10

1=R2,36,C65735,0

2=R2,32,C65734,0

3=R2,34,C65672,0

4=R2,38,C65671,0

5=R2,39,C65854,0

6=R2,37,C65855,0

7=R2,35,C65857,0

8=R2,33,C65856,0

9=P109,7,C65752,0

10=P109,6,C1001,0

11=U109,6,C1002,0

12=U109,7,C65752,0

13=P165,0,C66079,0

14=U165,0,C66080,0

16=R165,6,C65615,0

[Profile.Level D 767-300]

1=Level D Simulations B767-300ER - Air New Zeland

2=Level D Simulations B767-300ER - American Airlines

3=Level D Simulations B767-300ER - Qantas Airways

4=Level D Simulations B767-300ER - British Airways

5=[DXT3] Level D Simulations B767-300ER - British Airways

[buttons.Level D 767-300]

0=P1,0,K82,9

1=P1,8,K77,13

2=P1,9,K72,10

3=P1,1,K90,8

4=R1,10,C65607,0

5=R1,11,C65615,0

6=P1,2,K65,12

31=P109,0,C66379,0

32=U109,0,C66379,0

33=P109,1,C66239,0

34=U109,1,C66239,0

35=P109,2,C66052,0

36=U109,2,C66053,0

37=P109,3,C66376,0

38=U109,3,C66376,0

39=P109,4,C66240,0

40=U109,4,C66240,0

41=P109,5,C66059,0

42=U109,5,C66060,0

44=R169,2,C65966,0

45=U169,2,C65967,0

46=R169,3,C65971,0

47=U169,3,C65972,0

48=P109,8,K122,11

49=U109,8,K122,11

50=P109,9,K222,11

52=P109,10,K187,10

53=U109,10,K187,10

54=P109,11,K80,15

55=U109,11,K80,15

56=U109,9,K222,11

57=P109,7,C65752,0

58=U109,7,C65752,0

59=P109,6,C1001,0

60=U109,6,C1001,0

61=P2,1,K90,8

62=P2,0,K82,9

63=P2,8,K78,11

64=P2,9,K71,11

65=R2,10,C65607,0

66=R2,11,C65615,0

67=P2,2,K219,11

68=P2,3,K221,11

[Axes.Level D 767-300]

0=0X,256,D,22,0,0,0

1=0Z,256,D,9,0,0,0

2=0R,256,D,23,0,0,0

3=0V,256,D,10,0,0,0

4=1X,256,D,7,0,0,0

5=1Y,256,D,8,0,0,0

6=1Z,256,D,3,0,0,0

7=2X,256,D,1,0,0,0

8=2Y,256,D,2,0,0,0

[JoystickCalibration.Level D 767-300]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=0

RudderTrimControl=0

CowlFlaps1Control=0

CowlFlaps2Control=0

CowlFlaps3Control=0

CowlFlaps4Control=0

MaxSteerSpeed=60

Flaps=-16027,16383/16

Spoilers=-16019,16203/16

LeftBrake=-16380,16380/16

RightBrake=-16380,16380/16

Link to comment
Share on other sites

I have the lastest version of FSUIPC.

Sorry, "latest version" is meaningless. Please always state the version number. Folks have said this to me and after much wasted time I've found they were using a year-old version. by "latest" they merely meant "the latest one they'd noticed"!

Anyway, looking at your INI file, I see there is a problem, here:

5=[DXT3] Level D Simulations B767-300ER - British Airways

The characters [ and ] aren't allowed. i will change FSUIPC to eliminate them in the next update. But meanwhile you are not making best use of the facilities FSUIPC offers.

Change this line:

ShortAircraftNameOk=No

to read

ShortAircraftNameOk=Substring

then edit this section:

[Profile.Level D 767-300]

1=Level D Simulations B767-300ER - Air New Zeland

2=Level D Simulations B767-300ER - American Airlines

3=Level D Simulations B767-300ER - Qantas Airways

4=Level D Simulations B767-300ER - British Airways

5=[DXT3] Level D Simulations B767-300ER - British Airways

to read:

[Profile.Level D 767-300]

1=Level D Simulations B767-300

deleting the extra lines.

Then it will handle all aircraft containing "Level D Simulations B767-300" in the name.

I'll fix the problem with the [] characters in the next update, as I say.

Regards

Pete

Link to comment
Share on other sites

Thanks Pete My version was 3.90.

"The characters [ and ] aren't allowed. i will change FSUIPC to eliminate them in the next update. But meanwhile you are not making best use of the facilities FSUIPC offers."

In what way am I not making best use of the facilities only if you have time to write

Cheers

Craig

Link to comment
Share on other sites

In what way am I not making best use of the facilities only if you have time to write

I did write! I gave explicit instructions. Here, I'll repeat them for you, but I really shouldn't need to. You should read my messages all the way through, please! :-(

=====================

Change this line:

ShortAircraftNameOk=No

to read

ShortAircraftNameOk=Substring

then edit this section:

[Profile.Level D 767-300]

1=Level D Simulations B767-300ER - Air New Zeland

2=Level D Simulations B767-300ER - American Airlines

3=Level D Simulations B767-300ER - Qantas Airways

4=Level D Simulations B767-300ER - British Airways

5=[DXT3] Level D Simulations B767-300ER - British Airways

to read:

[Profile.Level D 767-300]

1=Level D Simulations B767-300

deleting the extra lines.

Then it will handle all aircraft containing "Level D Simulations B767-300" in the name.

Pete

Link to comment
Share on other sites

Sorry Pete I think we crossed lines here. I did read your message and I did apply the changes and yes they work fine. I was assuming when you said that I am not making good use of the programme you were referring to something else that why I asked.

Your first message made perfect scence and as I said the changes have been made and the work fine.

Cheers

Craig

Link to comment
Share on other sites

i will change FSUIPC to eliminate them in the next update.

Okay. the problem with the [ ] characters is fixed in FSUIPC versions 3.903 and 4.503, now available in the Updates Announcement above.

This fix won't mend current INI files containing [] in the [Profiles ...] sections -- you'd need to changed them manually to the round parentheses, i.e. [ to ( and ] to ) in the [Profiles ...] sections, but it will stop the problem arising in future.

Regards

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.