msg #14

[icybox]

HI

PLEASE CAN ANY ONE HELP ME I AM RUNNING A NETWORK ON TWO PC VISTA64 BIT EVERTHINK HAS BEEN OK BUT MY SKY HUB HAD TO BE REPLACED NOW WHEN I TRY TO CONNECT FSC

I GET A MESSAGE WAITING TO CONNECT MSG#14 ?

CHEERS DEAN

[Pete Dowson]

I WHEN I TRY TO CONNECT FSC

I GET A MESSAGE WAITING TO CONNECT MSG#14 ?

From what program? Has this anything to do with any of my programs? I've no "MSG#14" in any of my programs.

I can only support my own programs. If FSC is Flight Sim Commander and you are using WideFS then show me the WideClient and WideServer log files. But make sure your Network is working first, and also make sure your FSUIPC and WideFS are up to date.

Oh, and please find the Caps Lock key on your keyboard (on the left probably) and press it so you can use lower case too. It makes messages more readable and less like shouting.

Pete

[icybox]

Hi Pete

Sorry for writing in caps. Im still having the problems with wide client waiting to connect it has been working like a dream until I had to change the

Sky hub please can you look at the log files and help me solve the problem thank again for your time

Dean .

***** WideClient Log [version 6.78] Class=FS98MAIN *********

Date (dmy): 14/06/10, Time 20:41:21.638: Client name is DEAN-PC

187 Attempting to connect now

1201 Trying to locate server: Need details from Server Broadcast

1201 Failed to connect: waiting to try again

3245 Attempting to connect now

68469 Trying to locate server: Need details from Server Broadcast

940078 ****** End of session performance summary ******

940078 Total time connected = 0 seconds

940078 Reception maximum: 0 frames/sec, 0 bytes/sec

940078 Transmission maximum: 0 frames/sec, 0 bytes/sec

940078 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0

940078 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********

********* WideServer.DLL Log [version 7.53] *********

Blocksize guide = 4096 (double allowed)

Date (dmy): 14/06/10, Time 21:03:24.900: Server name is DEAN

15585 Initialising TCP/IP server

15585 Initialising IPX/SPX server

15585 IPX/SPX socket() failed [Error=10044] Socket type not supported

15585 Failed to start IPX/SPX Server

15585 Initialising UDP/IP server

16131 Broadcasting service every 1000 mSecs

72962 Closing down now ...

Memory managed: Offset records: 168 alloc, 167 free

Read buffer usage: 0 alloc, 0 free, max in session: 0

Write buffer usage: 0 alloc, 0 free, max in session: 0

Throughput maximum achieved: 0 frames/sec, 0 bytes/sec

Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec

********* Log file closed *********

[Pete Dowson]

Im still having the problems with wide client waiting to connect it has been working like a dream until I had to change the

Sky hub please can you look at the log files and help me solve the problem thank again for your time

The logs show nothing wrong except that the Client is not receiving broadcasts from the Server and you've not bothered to tell the Client what the Server name is nor the Protocol it should use.

You don't have to tell it these things if broadcasts work, but as it clearly says in the User Guide broadcasts only work if you make both PCs part of the same workgroup -- i.e. they must have the same workgroup name.

The one important thing you should have done after installing WideFS is to at least read the section of the User Guide called Configure your Network which does say at the very beginning, and in RED:

IT IS IMPORTANT FOR ALL USERS TO READ AT LEAST PART OF THIS!

Pete