otter Posted September 12, 2010 Report Share Posted September 12, 2010 Hi Pete, Maybe you can guide me on this issue. am trying ifly 737 just releasd, found autobrakes work for rto but on touch down autobrake switch snaps from max to of, no red brakes sign bottom left of screen,I tested this with default 737 rto works,on touch down autobrake switch snaps from max to of no auto brakes. I normaly use pmdg 737 or tinmouse 737/200 with no problems. not sure what to look for regarding this issue and wondered if you might have any ideas. winxp 32,sp3. pfc throttle quadrant,ciruss yoke,ciruss rudder/brake pedals. Thanks Richard. Link to comment Share on other sites More sharing options...
Pete Dowson Posted September 12, 2010 Report Share Posted September 12, 2010 am trying ifly 737 just releasd, found autobrakes work for rto but on touch down autobrake switch snaps from max to of, no red brakes sign bottom left of screen,I tested this with default 737 rto works,on touch down autobrake switch snaps from max to of no auto brakes. I didn't think the red "Brakes" notice came up on autobrake operation in any case. I think the autobrakes should switch off automatically if you use manual (or pedal, rather) braking, but I don't think that worked -- in FS9 at least, I remember you had to turn them off manually or you couldn't taxi off the runway. Pete Link to comment Share on other sites More sharing options...
otter Posted September 12, 2010 Author Report Share Posted September 12, 2010 Thanks for reply, Am using fs9, on approach i set auto brake switch to max, as soon as wheels touch the ground the switch snapped to off,no presure on brake pedals so no auto brakeing or maybe thats how it should work, i thuoght switch stayed on to activate auto brakes until pressure on brake pedals or turned of maually.it works like that on pmdg and tinmouse. Thanks Richard Link to comment Share on other sites More sharing options...
Pete Dowson Posted September 12, 2010 Report Share Posted September 12, 2010 Am using fs9, on approach i set auto brake switch to max, as soon as wheels touch the ground the switch snapped to off,no presure on brake pedals so no auto brakeing or maybe thats how it should work, i thuoght switch stayed on to activate auto brakes until pressure on brake pedals or turned of maually.it works like that on pmdg and tinmouse. Hmmm. I haven't used FS9 for a few years, but I seem to remember always having the problem that the autobrakes didn't switch off automatically at all, even when they should. As I said, if I forgot to turn them off manually after slowing down it was impossible to taxi! Are you sure you haven't got some add-on software doing this? Maybe a third party DLL in the modules folder? You might get some more feedback on this if you ask around over in the FS2004 Forum. [LATER] It occurs to me that if you want to investigate this a little more, use some FSUIPC facilities: On approach, before landing, go into FSUIPC options and: 1) enable Event logging, and 2) On the right-hand side of that Logging tab, enter offset 2F80 and type "U8", and check the "normal log" option below. This will log any FS commands, including any operating the autobrakes, and any changes to the offset controlling and reflecting the autobrake switch (0=RTO, 1=Off to 5 for 'Max'). Post the log here if you want help interpreting it. Regards Pete Link to comment Share on other sites More sharing options...
otter Posted September 12, 2010 Author Report Share Posted September 12, 2010 Thanks again pete, Will have a go at that , will get back to you later when ive worked it out. thanks Richard. Link to comment Share on other sites More sharing options...
otter Posted September 13, 2010 Author Report Share Posted September 13, 2010 Hi Pete, Hope ive done this correct. ********* FSUIPC, Version 3.98a by Pete Dowson ********* Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="Richard Druce" User Addr="richarddruce@eircom.net" FSUIPC Key is provided WIDEFS not user registered, or expired [Continuation log requested by user] Module base=61000000 ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E WeatherOptions(Orig)=4000B6A7[4000B6A7] InitDelay: 0 seconds WeatherReadInterval=4 LogOptions=00000001 434797 System time = 13/09/2010 10:53:02, FS2004 time = 10:51:24 (17:51Z) 434797 WeatherOptions set, now 4000B6A7 (timer=0) 434844 Monitor IPC:2F80 (U8) = 5 492985 Monitor IPC:2F80 (U8) = 1 Link to comment Share on other sites More sharing options...
Pete Dowson Posted September 13, 2010 Report Share Posted September 13, 2010 Hope ive done this correct. No, you forgot to enable Event logging. It's one of the check boxes on the Left side of the Logging tab. We can see that the autobrakes are turned off but there's no evidence as to why. In case it is an add-on changing this via FSUIPC you could also enable IPC write logging, another check box on the left. But only do any of this on approach, and switch off after landing. Also I see you started a new log by pushing the New Log button. Please don't. Only do the things I list. By starting a new log the details of the aircraft being used are lost, amongst other things. Pete Link to comment Share on other sites More sharing options...
otter Posted September 13, 2010 Author Report Share Posted September 13, 2010 Hope i got it this time. ********* FSUIPC, Version 3.98a by Pete Dowson ********* Running on Windows Version 5.1 Build 2600 Service Pack 3 Verifying Certificate for "C:\Program Files\Microsoft Games\Flight Simulator 9\MODULES\FSUIPC.dll" now ... SUCCESS! Signature verifies okay! Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="Richard Druce" User Addr="richarddruce@eircom.net" FSUIPC Key is provided WIDEFS not user registered, or expired Module base=61000000 ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E WeatherOptions(Orig)=4000B6A7[4000B6A7] InitDelay: 0 seconds WeatherReadInterval=4 LogOptions=00000001 DebugStatus=15 1328 System time = 13/09/2010 13:39:52 1328 C:\Program Files\Microsoft Games\Flight Simulator 9\ 1328 System time = 13/09/2010 13:39:52, FS2004 time = 12:00:00 (00:00Z) 4469 FLIGHTS\OTHER\FLTSIM.flt 4469 AIRCRAFT\c172\Cessna172SP.air 4485 Aircraft="Cessna Skyhawk 172SP" 7172 C:\Documents and Settings\Richard\My Documents\Flight Simulator Files\UI generated flight.flt 7281 Clear All Weather requested: external weather discarded 16281 Monitor IPC:2F80 (U8) = 1 16281 Advanced Weather Interface Enabled 16281 Traffic File #14 = "scenery\world\scenery\traffic" 16391 GoFlight GF46 detected: 1 device 46906 AIRCRAFT\b737_400\Boeing737-400.air 46906 Aircraft="Boeing 737-400" 73813 WeatherOptions set, now 4000B6A7 (timer=0) 305672 WRITE0 0DDE, 2 bytes: 08 00 305672 WRITE0 0DDC, 2 bytes: 21 00 307672 WRITE0 0DDE, 2 bytes: 08 00 307672 WRITE0 0DDC, 2 bytes: 21 00 309672 WRITE0 0DDE, 2 bytes: 08 00 309672 WRITE0 0DDC, 2 bytes: 21 00 311672 WRITE0 0DDE, 2 bytes: 08 00 311672 WRITE0 0DDC, 2 bytes: 21 00 313672 WRITE0 0DDE, 2 bytes: 08 00 313672 WRITE0 0DDC, 2 bytes: 21 00 315672 WRITE0 0DDE, 2 bytes: 08 00 315672 WRITE0 0DDC, 2 bytes: 21 00 317672 WRITE0 0DDE, 2 bytes: 08 00 317672 WRITE0 0DDC, 2 bytes: 21 00 319672 WRITE0 0DDE, 2 bytes: 08 00 319672 WRITE0 0DDC, 2 bytes: 21 00 321672 WRITE0 0DDE, 2 bytes: 08 00 321672 WRITE0 0DDC, 2 bytes: 21 00 323672 WRITE0 0DDE, 2 bytes: 08 00 323672 WRITE0 0DDC, 2 bytes: 21 00 325672 WRITE0 0DDE, 2 bytes: 08 00 325672 WRITE0 0DDC, 2 bytes: 21 00 327672 WRITE0 0DDE, 2 bytes: 08 00 327672 WRITE0 0DDC, 2 bytes: 21 00 329672 WRITE0 0DDE, 2 bytes: 08 00 329672 WRITE0 0DDC, 2 bytes: 21 00 331672 WRITE0 0DDE, 2 bytes: 08 00 331672 WRITE0 0DDC, 2 bytes: 21 00 333672 WRITE0 0DDE, 2 bytes: 08 00 333672 WRITE0 0DDC, 2 bytes: 21 00 335672 WRITE0 0DDE, 2 bytes: 08 00 335672 WRITE0 0DDC, 2 bytes: 21 00 337672 WRITE0 0DDE, 2 bytes: 08 00 337672 WRITE0 0DDC, 2 bytes: 21 00 339672 WRITE0 0DDE, 2 bytes: 08 00 339672 WRITE0 0DDC, 2 bytes: 21 00 341672 WRITE0 0DDE, 2 bytes: 08 00 341672 WRITE0 0DDC, 2 bytes: 21 00 343672 WRITE0 0DDE, 2 bytes: 08 00 343672 WRITE0 0DDC, 2 bytes: 21 00 345672 WRITE0 0DDE, 2 bytes: 08 00 345672 WRITE0 0DDC, 2 bytes: 21 00 347672 WRITE0 0DDE, 2 bytes: 08 00 347672 WRITE0 0DDC, 2 bytes: 21 00 349672 WRITE0 0DDE, 2 bytes: 08 00 349672 WRITE0 0DDC, 2 bytes: 21 00 351672 WRITE0 0DDE, 2 bytes: 08 00 351672 WRITE0 0DDC, 2 bytes: 21 00 353672 WRITE0 0DDE, 2 bytes: 08 00 353672 WRITE0 0DDC, 2 bytes: 21 00 355672 WRITE0 0DDE, 2 bytes: 08 00 355672 WRITE0 0DDC, 2 bytes: 21 00 357672 WRITE0 0DDE, 2 bytes: 08 00 357672 WRITE0 0DDC, 2 bytes: 21 00 359672 WRITE0 0DDE, 2 bytes: 08 00 359672 WRITE0 0DDC, 2 bytes: 21 00 361672 WRITE0 0DDE, 2 bytes: 08 00 361672 WRITE0 0DDC, 2 bytes: 21 00 363672 WRITE0 0DDE, 2 bytes: 08 00 363672 WRITE0 0DDC, 2 bytes: 21 00 365672 WRITE0 0DDE, 2 bytes: 08 00 365672 WRITE0 0DDC, 2 bytes: 21 00 367672 WRITE0 0DDE, 2 bytes: 08 00 367672 WRITE0 0DDC, 2 bytes: 21 00 369672 WRITE0 0DDE, 2 bytes: 08 00 369672 WRITE0 0DDC, 2 bytes: 21 00 371672 WRITE0 0DDE, 2 bytes: 08 00 371672 WRITE0 0DDC, 2 bytes: 21 00 373672 WRITE0 0DDE, 2 bytes: 08 00 373672 WRITE0 0DDC, 2 bytes: 21 00 375672 WRITE0 0DDE, 2 bytes: 08 00 375672 WRITE0 0DDC, 2 bytes: 21 00 377672 WRITE0 0DDE, 2 bytes: 08 00 377672 WRITE0 0DDC, 2 bytes: 21 00 379672 WRITE0 0DDE, 2 bytes: 08 00 379672 WRITE0 0DDC, 2 bytes: 21 00 381672 WRITE0 0DDE, 2 bytes: 08 00 381672 WRITE0 0DDC, 2 bytes: 21 00 383672 WRITE0 0DDE, 2 bytes: 08 00 383672 WRITE0 0DDC, 2 bytes: 21 00 385672 WRITE0 0DDE, 2 bytes: 08 00 385672 WRITE0 0DDC, 2 bytes: 21 00 387672 WRITE0 0DDE, 2 bytes: 08 00 387672 WRITE0 0DDC, 2 bytes: 21 00 389672 WRITE0 0DDE, 2 bytes: 08 00 389672 WRITE0 0DDC, 2 bytes: 21 00 391672 WRITE0 0DDE, 2 bytes: 08 00 391672 WRITE0 0DDC, 2 bytes: 21 00 393672 WRITE0 0DDE, 2 bytes: 08 00 393672 WRITE0 0DDC, 2 bytes: 21 00 395672 WRITE0 0DDE, 2 bytes: 08 00 395672 WRITE0 0DDC, 2 bytes: 21 00 397672 WRITE0 0DDE, 2 bytes: 08 00 397672 WRITE0 0DDC, 2 bytes: 21 00 399672 WRITE0 0DDE, 2 bytes: 08 00 399672 WRITE0 0DDC, 2 bytes: 21 00 401672 WRITE0 0DDE, 2 bytes: 08 00 401672 WRITE0 0DDC, 2 bytes: 21 00 403672 WRITE0 0DDE, 2 bytes: 08 00 403672 WRITE0 0DDC, 2 bytes: 21 00 405672 WRITE0 0DDE, 2 bytes: 08 00 405672 WRITE0 0DDC, 2 bytes: 21 00 407672 WRITE0 0DDE, 2 bytes: 08 00 407672 WRITE0 0DDC, 2 bytes: 21 00 409672 WRITE0 0DDE, 2 bytes: 08 00 409672 WRITE0 0DDC, 2 bytes: 21 00 411672 WRITE0 0DDE, 2 bytes: 08 00 411672 WRITE0 0DDC, 2 bytes: 21 00 413672 WRITE0 0DDE, 2 bytes: 08 00 413672 WRITE0 0DDC, 2 bytes: 21 00 415672 WRITE0 0DDE, 2 bytes: 08 00 415672 WRITE0 0DDC, 2 bytes: 21 00 417672 WRITE0 0DDE, 2 bytes: 08 00 417672 WRITE0 0DDC, 2 bytes: 21 00 419672 WRITE0 0DDE, 2 bytes: 08 00 419672 WRITE0 0DDC, 2 bytes: 21 00 421672 WRITE0 0DDE, 2 bytes: 08 00 421672 WRITE0 0DDC, 2 bytes: 21 00 423672 WRITE0 0DDE, 2 bytes: 08 00 423672 WRITE0 0DDC, 2 bytes: 21 00 425672 WRITE0 0DDE, 2 bytes: 08 00 425672 WRITE0 0DDC, 2 bytes: 21 00 427672 WRITE0 0DDE, 2 bytes: 08 00 427672 WRITE0 0DDC, 2 bytes: 21 00 429672 WRITE0 0DDE, 2 bytes: 08 00 429672 WRITE0 0DDC, 2 bytes: 21 00 431672 WRITE0 0DDE, 2 bytes: 08 00 431672 WRITE0 0DDC, 2 bytes: 21 00 433672 WRITE0 0DDE, 2 bytes: 08 00 433672 WRITE0 0DDC, 2 bytes: 21 00 435672 WRITE0 0DDE, 2 bytes: 08 00 435672 WRITE0 0DDC, 2 bytes: 21 00 437672 WRITE0 0DDE, 2 bytes: 08 00 437672 WRITE0 0DDC, 2 bytes: 21 00 439672 WRITE0 0DDE, 2 bytes: 08 00 439672 WRITE0 0DDC, 2 bytes: 21 00 441672 WRITE0 0DDE, 2 bytes: 08 00 441672 WRITE0 0DDC, 2 bytes: 21 00 443672 WRITE0 0DDE, 2 bytes: 08 00 443672 WRITE0 0DDC, 2 bytes: 21 00 445672 WRITE0 0DDE, 2 bytes: 08 00 445672 WRITE0 0DDC, 2 bytes: 21 00 447672 WRITE0 0DDE, 2 bytes: 08 00 447672 WRITE0 0DDC, 2 bytes: 21 00 449156 LogOptions changed, now 00000005 (LogExtras=0) 449688 WRITE0 0DDE, 2 bytes: 08 00 449688 WRITE0 0DDC, 2 bytes: 21 00 451672 WRITE0 0DDE, 2 bytes: 08 00 451672 WRITE0 0DDC, 2 bytes: 21 00 453703 WRITE0 0DDE, 2 bytes: 08 00 453703 WRITE0 0DDC, 2 bytes: 21 00 454985 *** EVENT: Cntrl= 66298 (0x000102fa), Param= 0 (0x00000000) INCREASE_AUTOBRAKE_CONTROL (NoAccel) 455000 Monitor IPC:2F80 (U8) = 2 455250 *** EVENT: Cntrl= 66298 (0x000102fa), Param= 0 (0x00000000) INCREASE_AUTOBRAKE_CONTROL (NoAccel) 455266 Monitor IPC:2F80 (U8) = 3 455547 *** EVENT: Cntrl= 66298 (0x000102fa), Param= 0 (0x00000000) INCREASE_AUTOBRAKE_CONTROL (NoAccel) 455563 Monitor IPC:2F80 (U8) = 4 455688 WRITE0 0DDE, 2 bytes: 08 00 455688 WRITE0 0DDC, 2 bytes: 21 00 455891 *** EVENT: Cntrl= 66298 (0x000102fa), Param= 0 (0x00000000) INCREASE_AUTOBRAKE_CONTROL (NoAccel) 455906 Monitor IPC:2F80 (U8) = 5 457156 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP (NoAccel) 457266 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457360 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457469 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457563 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457672 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457672 WRITE0 0DDE, 2 bytes: 08 00 457672 WRITE0 0DDC, 2 bytes: 21 00 457766 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457797 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 457875 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 459688 WRITE0 0DDE, 2 bytes: 08 00 459688 WRITE0 0DDC, 2 bytes: 21 00 459953 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460016 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460125 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460219 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460250 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460360 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460453 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460563 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460656 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460688 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460766 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460860 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 460969 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 461063 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 461094 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 461172 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 461672 WRITE0 0DDE, 2 bytes: 08 00 461672 WRITE0 0DDC, 2 bytes: 21 00 463688 WRITE0 0DDE, 2 bytes: 08 00 463688 WRITE0 0DDC, 2 bytes: 21 00 465672 WRITE0 0DDE, 2 bytes: 08 00 465672 WRITE0 0DDC, 2 bytes: 21 00 467688 WRITE0 0DDE, 2 bytes: 08 00 467688 WRITE0 0DDC, 2 bytes: 21 00 469672 WRITE0 0DDE, 2 bytes: 08 00 469672 WRITE0 0DDC, 2 bytes: 21 00 471688 WRITE0 0DDE, 2 bytes: 08 00 471688 WRITE0 0DDC, 2 bytes: 21 00 472047 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472125 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472219 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472250 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472328 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472453 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472531 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472625 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472719 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 472797 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 473672 WRITE0 0DDE, 2 bytes: 08 00 473672 WRITE0 0DDC, 2 bytes: 21 00 475688 WRITE0 0DDE, 2 bytes: 08 00 475688 WRITE0 0DDC, 2 bytes: 21 00 477703 WRITE0 0DDE, 2 bytes: 08 00 477703 WRITE0 0DDC, 2 bytes: 21 00 479688 WRITE0 0DDE, 2 bytes: 08 00 479688 WRITE0 0DDC, 2 bytes: 21 00 480125 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480219 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480313 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480453 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480516 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480625 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480719 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480750 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480828 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 480953 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481063 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481156 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481188 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481266 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481360 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481469 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 481672 WRITE0 0DDE, 2 bytes: 08 00 481672 WRITE0 0DDC, 2 bytes: 21 00 483688 WRITE0 0DDE, 2 bytes: 08 00 483688 WRITE0 0DDC, 2 bytes: 21 00 485703 WRITE0 0DDE, 2 bytes: 08 00 485703 WRITE0 0DDC, 2 bytes: 21 00 487641 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 487688 WRITE0 0DDE, 2 bytes: 08 00 487688 WRITE0 0DDC, 2 bytes: 21 00 487719 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 487813 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 487844 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 487953 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488016 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488125 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488219 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488313 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488453 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488516 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488625 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 488719 *** EVENT: Cntrl= 65615 (0x0001004f), Param= 0 (0x00000000) ELEV_TRIM_UP 489672 WRITE0 0DDE, 2 bytes: 08 00 489672 WRITE0 0DDC, 2 bytes: 21 00 491688 WRITE0 0DDE, 2 bytes: 08 00 491688 WRITE0 0DDC, 2 bytes: 21 00 493672 WRITE0 0DDE, 2 bytes: 08 00 493672 WRITE0 0DDC, 2 bytes: 21 00 495688 WRITE0 0DDE, 2 bytes: 08 00 495688 WRITE0 0DDC, 2 bytes: 21 00 497672 WRITE0 0DDE, 2 bytes: 08 00 497672 WRITE0 0DDC, 2 bytes: 21 00 499703 WRITE0 0DDE, 2 bytes: 08 00 499703 WRITE0 0DDC, 2 bytes: 21 00 501688 WRITE0 0DDE, 2 bytes: 08 00 501688 WRITE0 0DDC, 2 bytes: 21 00 503672 WRITE0 0DDE, 2 bytes: 08 00 503672 WRITE0 0DDC, 2 bytes: 21 00 505688 WRITE0 0DDE, 2 bytes: 08 00 505688 WRITE0 0DDC, 2 bytes: 21 00 507672 WRITE0 0DDE, 2 bytes: 08 00 507672 WRITE0 0DDC, 2 bytes: 21 00 509688 WRITE0 0DDE, 2 bytes: 08 00 509688 WRITE0 0DDC, 2 bytes: 21 00 511360 WRITEex 2F80, 1 bytes: 01 511391 Monitor IPC:2F80 (U8) = 1 511688 WRITE0 0DDE, 2 bytes: 08 00 511688 WRITE0 0DDC, 2 bytes: 21 00 513672 WRITE0 0DDE, 2 bytes: 08 00 513672 WRITE0 0DDC, 2 bytes: 21 00 515688 WRITE0 0DDE, 2 bytes: 08 00 515688 WRITE0 0DDC, 2 bytes: 21 00 517672 WRITE0 0DDE, 2 bytes: 08 00 517672 WRITE0 0DDC, 2 bytes: 21 00 519688 WRITE0 0DDE, 2 bytes: 08 00 519688 WRITE0 0DDC, 2 bytes: 21 00 521250 WRITEex 0C00, 1 bytes: 47 521250 WRITEex 0C00, 1 bytes: A1 521360 WRITEex 0C00, 1 bytes: BB 521360 WRITEex 0C00, 1 bytes: C8 521453 WRITEex 0C01, 1 bytes: 3A 521453 WRITEex 0C01, 1 bytes: 64 521453 WRITEex 0C01, 1 bytes: 79 521547 WRITEex 0C01, 1 bytes: 8E 521563 WRITEex 0C01, 1 bytes: A3 521594 WRITEex 0C01, 1 bytes: B3 521656 WRITEex 0C01, 1 bytes: C3 521672 WRITE0 0DDE, 2 bytes: 08 00 521672 WRITE0 0DDC, 2 bytes: 21 00 521750 WRITEex 0C01, 1 bytes: C8 523688 WRITE0 0DDE, 2 bytes: 08 00 523688 WRITE0 0DDC, 2 bytes: 21 00 525672 WRITE0 0DDE, 2 bytes: 08 00 525672 WRITE0 0DDC, 2 bytes: 21 00 527688 WRITE0 0DDE, 2 bytes: 08 00 527688 WRITE0 0DDC, 2 bytes: 21 00 529672 WRITE0 0DDE, 2 bytes: 08 00 529672 WRITE0 0DDC, 2 bytes: 21 00 529953 WRITEex 0C01, 1 bytes: C3 529953 WRITEex 0C01, 1 bytes: 9E 529953 WRITEex 0C00, 1 bytes: C2 529953 WRITEex 0C01, 1 bytes: 6F 529953 WRITEex 0C00, 1 bytes: 2D 529953 WRITEex 0C01, 1 bytes: 00 529953 WRITEex 0C00, 1 bytes: 00 531672 WRITE0 0DDE, 2 bytes: 08 00 531672 WRITE0 0DDC, 2 bytes: 21 00 533672 WRITE0 0DDE, 2 bytes: 08 00 533672 WRITE0 0DDC, 2 bytes: 21 00 535672 WRITE0 0DDE, 2 bytes: 08 00 535672 WRITE0 0DDC, 2 bytes: 21 00 537672 WRITE0 0DDE, 2 bytes: 08 00 537672 WRITE0 0DDC, 2 bytes: 21 00 543594 LogOptions changed, now 00000001 (LogExtras=0) 551547 System time = 13/09/2010 13:49:02, FS2004 time = 13:45:47 (20:45Z) 551547 *** FSUIPC log file being closed Memory managed: 0 Allocs, 5975 Freed ********* FSUIPC Log file closed *********** Link to comment Share on other sites More sharing options...
Pete Dowson Posted September 13, 2010 Report Share Posted September 13, 2010 Hope i got it this time. Yes. Here's the relevant part: 511360 WRITEex 2F80, 1 bytes: 01 511391 Monitor IPC:2F80 (U8) = 1 521250 WRITEex 0C00, 1 bytes: 47 521250 WRITEex 0C00, 1 bytes: A1 521360 WRITEex 0C00, 1 bytes: BB 521360 WRITEex 0C00, 1 bytes: C8 521453 WRITEex 0C01, 1 bytes: 3A 521453 WRITEex 0C01, 1 bytes: 64 521453 WRITEex 0C01, 1 bytes: 79 521547 WRITEex 0C01, 1 bytes: 8E 521563 WRITEex 0C01, 1 bytes: A3 521594 WRITEex 0C01, 1 bytes: B3 521656 WRITEex 0C01, 1 bytes: C3 521750 WRITEex 0C01, 1 bytes: C8 529953 WRITEex 0C01, 1 bytes: C3 529953 WRITEex 0C01, 1 bytes: 9E 529953 WRITEex 0C00, 1 bytes: C2 529953 WRITEex 0C01, 1 bytes: 6F 529953 WRITEex 0C00, 1 bytes: 2D 529953 WRITEex 0C01, 1 bytes: 00 529953 WRITEex 0C00, 1 bytes: 00 Seems you have an external program managing your braking on landing. It is turning off the autobrakes (WRITEex 2F80, 1 bytes: 01), and then attempting to manipulate the toe brakes by writing to offsets 0C00 and 0C01 (right and left brakes respectively). The reason it probably doesn't work on some of your add-on aircraft is that they operate their own autobraking so are not affected by the FS autobrake being turned off. I've tried FS9 again today and it certainly doesn't itself turn autobrakes off. You need to examine what you have running! Regards Pete Link to comment Share on other sites More sharing options...
otter Posted September 13, 2010 Author Report Share Posted September 13, 2010 Thanks very much pete, Only external prog i tried ,tsr auto brake didnt quite under stand it could it be the problem? Thanks again for your help. Richard Link to comment Share on other sites More sharing options...
Pete Dowson Posted September 13, 2010 Report Share Posted September 13, 2010 Only external prog i tried ,tsr auto brake didnt quite under stand it could it be the problem? Yes, of course that will be it -- it is taking over the autobraking. It is very good: it is able to simulate different braking effectiveness according to all sorts of factors, such as runway state, aircraft weight, alignment of aircraft, and so on, even brake wear and temperature from previous usage I think. Regards Pete Link to comment Share on other sites More sharing options...
otter Posted September 13, 2010 Author Report Share Posted September 13, 2010 Thanks pete, Will look at it again. Richard. Link to comment Share on other sites More sharing options...
otter Posted September 13, 2010 Author Report Share Posted September 13, 2010 After looking at tsr auto brake i now have it working, so autobrakes now work on ifly 737/default 737. My fault i shoud have studied it in more depth!, Thanks at least you were able to point me in right direction. Richard. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now