Jump to content
The simFlight Network Forums

Elevator axis failure on switching aircraft


Recommended Posts

Pete:

I have several times noticed that when I switch aircraft, either the elevator axis or the aileron axis stops working and I have to go back into FSUIPC and re-assign the axis. Below are FSUIPC.INI, LOG, and LOG1 logging the latest such event. Here, the both were fine on the c172 but on changing to the Embraer 170 the ailerons worked but the elevator was dead. Maybe I am missing something in setting up FSUIPC? I have a profile for "jet." Is this plane assigned to it?

THANKS!

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight Yoke

1=Saitek Pro Flight Throttle Quadrant

2=CH Pro Pedals USB

0.GUID={480AF7E0-69CF-11E0-8001-444553540000}

1.GUID={480AF7E0-69CF-11E0-8002-444553540000}

2.GUID={C8141BF0-69D0-11E0-8003-444553540000}

[General]

UpdatedByVersion=3990

TCASid=Flight

TCASrange=40

TrafficScanPerFrame=10

AxisCalibration=No

CentredDialogue=Yes

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

ClearWeatherDynamics=Yes

OwnWeatherChanges=No

WeatherReadInterval=4

MoveBGLvariables=Yes

TimeForSelect=4

WeatherReadsFast=No

MainMenu=&Modules

SubMenu=&FSUIPC ...

WindSmoothing=Yes

AutoTaxiWind=No

PropTaxiWind=No

TimeSetMode=Partial

WhiteMessages=No

ThrottleSyncAll=No

GraduatedVisibility=No

LowerVisAltitude=0

UpperVisAltitude=25000

UpperVisibility=6000

GenerateCirrus=Yes

WindShearSharp=No

UpperWindGusts=No

ExtendMetarMaxVis=Yes

CorrectVSsign=Yes

MouseWheelTrim=No

MouseWheelTrimSpeed=1

BrakeReleaseThreshold=75

AxisInterceptIfDirect=No

DontResetAxes=No

DisconnTrimForAP=No

ZeroElevForAPAlt=No

AutoClearWeather=Yes

ExtendTopWind=Yes

WindSmoothness=5

SmoothPressure=No

PressureSmoothness=5

SmoothVisibility=No

VisibilitySmoothness=2

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

MinimumVisibility=0

MaximumVisibilityFewClouds=0

MaximumVisibility=0

MaximumVisibilityOvercast=0

MaximumVisibilityRainy=0

OneCloudLayer=No

ThinClouds=No

ThinThunderClouds=No

CloudThinness=1000

ThunderCloudThinness=10000

CloudTurbulence=No

CloudIcing=No

WindTurbulence=No

SuppressAllGusts=No

ExternalOptionControl=Yes

AutoTuneADF=No

KeepFS98CloudCover=No

ShowPMcontrols=No

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=Yes

StopAutoFuel=No

TrapUserInterrupt=Yes

NavFreq50KHz=Yes

ClockSync=Yes

SmoothIAS=Yes

SetVisUpperAlt=No

VisUpperAltLimit=6000

MaxIce=3

MinIce=-1

WindSmoothingDelay=0

WindSmoothAirborneOnly=No

LimitWindVariance=No

VisSmoothingDelay=0

VisSmoothAirborneOnly=No

TrafficControlDirect=Yes

SuppressCloudTurbulence=No

SuppressWindTurbulence=No

SpoilerIncrement=512

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

FixWindows=No

FixControlAccel=No

LuaRerunDelay=66

SetSimSpeedX1=88,11

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=0

RudderTrimControl=0

CowlFlaps1Control=0

CowlFlaps2Control=0

CowlFlaps3Control=0

CowlFlaps4Control=0

MaxSteerSpeed=60

Elevator=-16287,-512,512,14816

Rudder=-16253,-512,512,16383

SlopeRudder=10

Throttle=-14683,-927

LeftBrake=-16384,16383/16

SlopeLeftBrake=15

RightBrake=-16189,16383/16

SlopeRightBrake=15

Mixture=-16384,16254

Spoilers=-16384,16383/16

CowlFlaps1=-16384,16383

PropPitch=-14633,-2100

PropPitch1=0,0,512,16380

[sounds]

Path=C:\Program Files (x86)\Microsoft Games\Flight Simulator 9\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Realtek High Definition Audio)

Device3=Realtek Digital Output (Realtek High Definition Audio)

[buttons]

ButtonRepeat=20,10

1=P0,1,C65567,0

2=P0,2,C66172,0

3=P0,3,C66173,0

4=P0,6,C65758,0

5=P0,7,C65759,0

6=P0,4,C65570,0

7=P0,0,C65564,0

8=P1,0,C66224,0

9=P1,1,C66531,0

10=P1,2,C65908,0

11=P1,4,C65907,0

12=P1,5,C65909,0

13=P1,3,C65910,0

14=P0,14,C65860,0

15=P0,15,C65861,0

16=P0,16,C66288,0

19=R1,7,C65602,0

[Axes]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,2,0,0,0

3=0U,256,D,1,0,0,0

4=1X,256,D,4,0,0,0

5=1Z,256,D,6,0,0,0

6=2X,256,D,7,0,0,0

7=2Y,256,D,8,0,0,0

8=2Z,256,D,3,0,0,0

[Profile.Jet]

1=Boeing 737-400

[buttons.Jet]

0=P1,6,C66066,0

1=U1,6,C66067,0

[Axes.Jet]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,1,0,0,0

3=0U,256,D,1,0,0,0

4=1X,256,D,4,0,0,0

5=1Y,256,D,22,0,0,0

6=1Z,256,D,6,0,0,0

7=2X,256,D,7,0,0,0

8=2Y,256,D,8,0,0,0

9=2Z,256,D,3,0,0,0

[Window.Radar Contact]

Docked=474, 4415, 3471, 2253

[Profile.prop, single engine]

1=Cessna Skyhawk 172SP Paint2

[JoystickCalibration.prop, single engine]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=0

RudderTrimControl=0

CowlFlaps1Control=0

CowlFlaps2Control=0

CowlFlaps3Control=0

CowlFlaps4Control=0

MaxSteerSpeed=60

Aileron=-16384,-512,512,16128

Elevator=-16384,-512,512,16383

Rudder=-16253,-3121,5289,16383

SlopeRudder=11

Throttle=-14606,-2705

Mixture=-16384,16254

LeftBrake=-16384,16383/16

SlopeLeftBrake=9

RightBrake=-16189,16383/16

SlopeRightBrake=9

Spoilers=-16384,16383/16

[Profile.prop, complex]

1=Mooney Bravo

[Axes.prop, complex]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,29,0,0,0

3=0R,1,D,29,0,0,0

4=0U,256,D,1,0,0,0

5=1X,256,D,4,0,0,0

6=1Y,256,F,66291,0,0,0

7=1Z,256,D,6,0,0,0

8=2X,256,D,7,0,0,0

9=2Y,256,D,8,0,0,0

10=2Z,256,D,3,0,0,0

[buttons.prop, complex]

0=P0,22,C66237,0

1=U0,22,C66237,0

********* FSUIPC, Version 3.99 by Pete Dowson *********

Running on Windows Version 5.1 Build 2600 Service Pack 2

Verifying Certificate for "C:\Program Files (x86)\Microsoft Games\Flight Simulator 9\MODULES\FSUIPC.dll" now ...

SUCCESS! Signature verifies okay!

Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)

User Name="Nelson Capes"

User Addr="nrcapes@gmail.com"

FSUIPC Key is provided

WIDEFS not user registered, or expired

Module base=61000000

WeatherReadInterval=4

LogOptions=00000001

DebugStatus=15

2886 System time = 12/05/2011 12:34:11

2886 C:\Program Files (x86)\Microsoft Games\Flight Simulator 9\

2902 System time = 12/05/2011 12:34:11, FS2004 time = 12:00:00 (00:00Z)

3962 C:\Users\Nelson\Documents\Flight Simulator Files\c172_default.flt

3978 AIRCRAFT\c172\Cessna172SP.air

3994 Aircraft="Cessna Skyhawk 172SP Paint2"

21450 C:\Users\Nelson\Documents\Flight Simulator Files\UI generated flight.flt

21747 Clear All Weather requested: external weather discarded

22449 Advanced Weather Interface Enabled

28501 Traffic File #14 = "scenery\world\scenery\traffic030528"

222270 C:\Users\Nelson\Documents\Flight Simulator Files\UI generated flight.flt

222598 Clear All Weather requested: external weather discarded

361579 AIRCRAFT\170fyc\embraer170.air

361642 Aircraft="AirC Embraer 170"

406211 C:\Users\Nelson\Documents\Flight Simulator Files\UI generated flight.flt

406710 Clear All Weather requested: external weather discarded

[Log closed by user request, and continued in new file]

490093 System time = 12/05/2011 12:42:18, FS2004 time = 05:40:58 (11:40Z)

490093 *** FSUIPC log file being closed

Memory managed: 0 Allocs, 4188 Freed

********* FSUIPC Log file closed ***********

********* FSUIPC, Version 3.99 by Pete Dowson *********

Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)

User Name="Nelson Capes"

User Addr="nrcapes@gmail.com"

FSUIPC Key is provided

WIDEFS not user registered, or expired

[Continuation log requested by user]

Module base=61000000

WeatherReadInterval=4

LogOptions=00000001

490093 System time = 12/05/2011 12:42:18, FS2004 time = 05:40:58 (11:40Z)

490093 WeatherOptions set, now 4000360D (timer=0)

495990 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 384 (0x00000180) AXIS_AILERONS_SET

495990 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1216 (0x000004c0) AXIS_AILERONS_SET

496021 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1568 (0x00000620) AXIS_AILERONS_SET

496021 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 2336 (0x00000920) AXIS_AILERONS_SET

496036 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 2624 (0x00000a40) AXIS_AILERONS_SET

496036 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 3168 (0x00000c60) AXIS_AILERONS_SET

496036 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 3648 (0x00000e40) AXIS_AILERONS_SET

496068 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 4096 (0x00001000) AXIS_AILERONS_SET

496068 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 5120 (0x00001400) AXIS_AILERONS_SET

496083 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 5440 (0x00001540) AXIS_AILERONS_SET

496083 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 5792 (0x000016a0) AXIS_AILERONS_SET

496114 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 6528 (0x00001980) AXIS_AILERONS_SET

496114 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 6784 (0x00001a80) AXIS_AILERONS_SET

496114 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 7712 (0x00001e20) AXIS_AILERONS_SET

496130 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 8128 (0x00001fc0) AXIS_AILERONS_SET

496130 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 8768 (0x00002240) AXIS_AILERONS_SET

496146 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 9056 (0x00002360) AXIS_AILERONS_SET

496146 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 9760 (0x00002620) AXIS_AILERONS_SET

496177 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 10176 (0x000027c0) AXIS_AILERONS_SET

496177 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 11104 (0x00002b60) AXIS_AILERONS_SET

496177 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 11424 (0x00002ca0) AXIS_AILERONS_SET

496192 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 12032 (0x00002f00) AXIS_AILERONS_SET

496192 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 12384 (0x00003060) AXIS_AILERONS_SET

496224 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 12928 (0x00003280) AXIS_AILERONS_SET

496224 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 13568 (0x00003500) AXIS_AILERONS_SET

496239 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 14112 (0x00003720) AXIS_AILERONS_SET

496239 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 14880 (0x00003a20) AXIS_AILERONS_SET

496270 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 15136 (0x00003b20) AXIS_AILERONS_SET

496270 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 16064 (0x00003ec0) AXIS_AILERONS_SET

496286 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 16383 (0x00003fff) AXIS_AILERONS_SET

496551 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 16096 (0x00003ee0) AXIS_AILERONS_SET

496582 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 15360 (0x00003c00) AXIS_AILERONS_SET

496582 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 14688 (0x00003960) AXIS_AILERONS_SET

496598 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 14336 (0x00003800) AXIS_AILERONS_SET

496598 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 13536 (0x000034e0) AXIS_AILERONS_SET

496598 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 13152 (0x00003360) AXIS_AILERONS_SET

496629 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 12640 (0x00003160) AXIS_AILERONS_SET

496629 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 10816 (0x00002a40) AXIS_AILERONS_SET

496645 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 10176 (0x000027c0) AXIS_AILERONS_SET

496645 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 9632 (0x000025a0) AXIS_AILERONS_SET

496676 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 8608 (0x000021a0) AXIS_AILERONS_SET

496676 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 8032 (0x00001f60) AXIS_AILERONS_SET

496676 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 6560 (0x000019a0) AXIS_AILERONS_SET

496692 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 5664 (0x00001620) AXIS_AILERONS_SET

496692 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 4544 (0x000011c0) AXIS_AILERONS_SET

496707 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 4064 (0x00000fe0) AXIS_AILERONS_SET

496707 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 2656 (0x00000a60) AXIS_AILERONS_SET

496738 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1664 (0x00000680) AXIS_AILERONS_SET

496738 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 160 (0x000000a0) AXIS_AILERONS_SET

496832 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -450 (0xfffffe3e) AXIS_AILERONS_SET

496848 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1060 (0xfffffbdc) AXIS_AILERONS_SET

496879 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1638 (0xfffff99a) AXIS_AILERONS_SET

496894 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1927 (0xfffff879) AXIS_AILERONS_SET

496910 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2217 (0xfffff757) AXIS_AILERONS_SET

496941 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2666 (0xfffff596) AXIS_AILERONS_SET

496957 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3180 (0xfffff394) AXIS_AILERONS_SET

496988 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3759 (0xfffff151) AXIS_AILERONS_SET

496988 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4048 (0xfffff030) AXIS_AILERONS_SET

496988 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4497 (0xffffee6f) AXIS_AILERONS_SET

497004 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4851 (0xffffed0d) AXIS_AILERONS_SET

497004 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5301 (0xffffeb4b) AXIS_AILERONS_SET

497035 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5590 (0xffffea2a) AXIS_AILERONS_SET

497035 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6264 (0xffffe788) AXIS_AILERONS_SET

497035 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6682 (0xffffe5e6) AXIS_AILERONS_SET

497050 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6939 (0xffffe4e5) AXIS_AILERONS_SET

497050 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7324 (0xffffe364) AXIS_AILERONS_SET

497066 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7838 (0xffffe162) AXIS_AILERONS_SET

497066 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8192 (0xffffe000) AXIS_AILERONS_SET

497097 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8931 (0xffffdd1d) AXIS_AILERONS_SET

497097 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -9252 (0xffffdbdc) AXIS_AILERONS_SET

497097 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -9959 (0xffffd919) AXIS_AILERONS_SET

497113 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10633 (0xffffd677) AXIS_AILERONS_SET

497144 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11147 (0xffffd475) AXIS_AILERONS_SET

497144 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11725 (0xffffd233) AXIS_AILERONS_SET

497160 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -12015 (0xffffd111) AXIS_AILERONS_SET

497160 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -12593 (0xffffcecf) AXIS_AILERONS_SET

497160 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -13300 (0xffffcc0c) AXIS_AILERONS_SET

497191 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -13749 (0xffffca4b) AXIS_AILERONS_SET

497191 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14103 (0xffffc8e9) AXIS_AILERONS_SET

497206 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14585 (0xffffc707) AXIS_AILERONS_SET

497238 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15163 (0xffffc4c5) AXIS_AILERONS_SET

497238 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15548 (0xffffc344) AXIS_AILERONS_SET

497238 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -16384 (0xffffc000) AXIS_AILERONS_SET

497550 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15613 (0xffffc303) AXIS_AILERONS_SET

497550 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15291 (0xffffc445) AXIS_AILERONS_SET

497565 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14456 (0xffffc788) AXIS_AILERONS_SET

497581 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14038 (0xffffc92a) AXIS_AILERONS_SET

497596 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -13332 (0xffffcbec) AXIS_AILERONS_SET

497596 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -12689 (0xffffce6f) AXIS_AILERONS_SET

497612 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11918 (0xffffd172) AXIS_AILERONS_SET

497628 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10890 (0xffffd576) AXIS_AILERONS_SET

497628 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10344 (0xffffd798) AXIS_AILERONS_SET

497659 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -9316 (0xffffdb9c) AXIS_AILERONS_SET

497659 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8898 (0xffffdd3e) AXIS_AILERONS_SET

497659 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8031 (0xffffe0a1) AXIS_AILERONS_SET

497674 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7549 (0xffffe283) AXIS_AILERONS_SET

497674 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6714 (0xffffe5c6) AXIS_AILERONS_SET

497706 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5943 (0xffffe8c9) AXIS_AILERONS_SET

497706 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5011 (0xffffec6d) AXIS_AILERONS_SET

497721 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4530 (0xffffee4e) AXIS_AILERONS_SET

497721 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3951 (0xfffff091) AXIS_AILERONS_SET

497721 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3116 (0xfffff3d4) AXIS_AILERONS_SET

497752 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2506 (0xfffff636) AXIS_AILERONS_SET

497752 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2120 (0xfffff7b8) AXIS_AILERONS_SET

497768 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1317 (0xfffffadb) AXIS_AILERONS_SET

497768 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -996 (0xfffffc1c) AXIS_AILERONS_SET

497784 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -482 (0xfffffe1e) AXIS_AILERONS_SET

497784 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -32 (0xffffffe0) AXIS_AILERONS_SET

498033 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -610 (0xfffffd9e) AXIS_AILERONS_SET

498033 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1574 (0xfffff9da) AXIS_AILERONS_SET

498033 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1863 (0xfffff8b9) AXIS_AILERONS_SET

498064 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2506 (0xfffff636) AXIS_AILERONS_SET

498064 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2859 (0xfffff4d5) AXIS_AILERONS_SET

498080 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3116 (0xfffff3d4) AXIS_AILERONS_SET

498080 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3855 (0xfffff0f1) AXIS_AILERONS_SET

498111 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4369 (0xffffeeef) AXIS_AILERONS_SET

498111 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5108 (0xffffec0c) AXIS_AILERONS_SET

498111 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5525 (0xffffea6b) AXIS_AILERONS_SET

498127 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6361 (0xffffe727) AXIS_AILERONS_SET

498142 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7421 (0xffffe303) AXIS_AILERONS_SET

498142 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7742 (0xffffe1c2) AXIS_AILERONS_SET

498142 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8513 (0xffffdebf) AXIS_AILERONS_SET

498174 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -9316 (0xffffdb9c) AXIS_AILERONS_SET

498189 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10023 (0xffffd8d9) AXIS_AILERONS_SET

498189 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10569 (0xffffd6b7) AXIS_AILERONS_SET

498220 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10890 (0xffffd576) AXIS_AILERONS_SET

498220 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11308 (0xffffd3d4) AXIS_AILERONS_SET

498236 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11661 (0xffffd273) AXIS_AILERONS_SET

498236 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -12400 (0xffffcf90) AXIS_AILERONS_SET

498267 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -12978 (0xffffcd4e) AXIS_AILERONS_SET

498283 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -13557 (0xffffcb0b) AXIS_AILERONS_SET

498283 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14392 (0xffffc7c8) AXIS_AILERONS_SET

498314 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14874 (0xffffc5e6) AXIS_AILERONS_SET

498330 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15291 (0xffffc445) AXIS_AILERONS_SET

498345 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15677 (0xffffc2c3) AXIS_AILERONS_SET

498345 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -16223 (0xffffc0a1) AXIS_AILERONS_SET

498688 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15805 (0xffffc243) AXIS_AILERONS_SET

498704 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -15066 (0xffffc526) AXIS_AILERONS_SET

498704 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -14199 (0xffffc889) AXIS_AILERONS_SET

498735 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -13846 (0xffffc9ea) AXIS_AILERONS_SET

498735 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -13235 (0xffffcc4d) AXIS_AILERONS_SET

498751 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -12882 (0xffffcdae) AXIS_AILERONS_SET

498751 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11725 (0xffffd233) AXIS_AILERONS_SET

498782 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -11468 (0xffffd334) AXIS_AILERONS_SET

498782 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10794 (0xffffd5d6) AXIS_AILERONS_SET

498782 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -10312 (0xffffd7b8) AXIS_AILERONS_SET

498798 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8866 (0xffffdd5e) AXIS_AILERONS_SET

498798 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -8449 (0xffffdeff) AXIS_AILERONS_SET

498829 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7871 (0xffffe141) AXIS_AILERONS_SET

498829 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -7421 (0xffffe303) AXIS_AILERONS_SET

498844 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6618 (0xffffe626) AXIS_AILERONS_SET

498844 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -6296 (0xffffe768) AXIS_AILERONS_SET

498844 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -5011 (0xffffec6d) AXIS_AILERONS_SET

498860 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4690 (0xffffedae) AXIS_AILERONS_SET

498860 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -4016 (0xfffff050) AXIS_AILERONS_SET

498891 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -3469 (0xfffff273) AXIS_AILERONS_SET

498891 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -2666 (0xfffff596) AXIS_AILERONS_SET

498907 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1927 (0xfffff879) AXIS_AILERONS_SET

498938 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -1156 (0xfffffb7c) AXIS_AILERONS_SET

498938 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -771 (0xfffffcfd) AXIS_AILERONS_SET

498954 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -64 (0xffffffc0) AXIS_AILERONS_SET

525505 C:\Users\Nelson\Documents\Flight Simulator Files\UI generated flight.flt

526067 Clear All Weather requested: external weather discarded

535333 System time = 12/05/2011 12:43:03, FS2004 time = 05:40:13 (11:40Z)

535333 *** FSUIPC log file being closed

Memory managed: 0 Allocs, 4492 Freed

********* FSUIPC Log file closed ***********

Link to comment
Share on other sites

I have several times noticed that when I switch aircraft, either the elevator axis or the aileron axis stops working and I have to go back into FSUIPC and re-assign the axis.

There's really no way it can lose such a setting. But it does have to re-read the INI file on a change of aircraft to see if assignments etc need changing.

Below are FSUIPC.INI, LOG, and LOG1 logging the latest such event. Here, the both were fine on the c172 but on changing to the Embraer 170 the ailerons worked but the elevator was dead. Maybe I am missing something in setting up FSUIPC? I have a profile for "jet." Is this plane assigned to it?

no. As you can see:

[Profile.Jet]

1=Boeing 737-400

That's the only aircraft listed for the Jet profile.

FSUIPC shows the profile at the top of the assignments dialogue when one is in operation.

You appear to have axes assigned for "Jet" and generic, so the Embraer would use the generic assignments.

there are strange anomalies in your assignments in any case. Look at the generic ones first:

[Axes]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,2,0,0,0

3=0U,256,D,1,0,0,0

4=1X,256,D,4,0,0,0

5=1Z,256,D,6,0,0,0

6=2X,256,D,7,0,0,0

7=2Y,256,D,8,0,0,0

8=2Z,256,D,3,0,0,0

You have two assignments for both Ailerons (0X, 0U) and Elevators (0Y, 0Z), both on the same joystick device! They'll conflict.

the Jet profile assignments are also odd:

[Axes.Jet]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,1,0,0,0

3=0U,256,D,1,0,0,0

4=1X,256,D,4,0,0,0

5=1Y,256,D,22,0,0,0

6=1Z,256,D,6,0,0,0

7=2X,256,D,7,0,0,0

8=2Y,256,D,8,0,0,0

9=2Z,256,D,3,0,0,0

Here you have 3 (THREE!) assignments to ailerons (0X, 0Z and 0U), and one to elevator (0Y).

I would guess at the very least you'd get some odd things happening, including axes apparently not doing what you thought!

Regards

Pete

Link to comment
Share on other sites

There's really no way it can lose such a setting. But it does have to re-read the INI file on a change of aircraft to see if assignments etc need changing.

no. As you can see:

That's the only aircraft listed for the Jet profile.

FSUIPC shows the profile at the top of the assignments dialogue when one is in operation.

You appear to have axes assigned for "Jet" and generic, so the Embraer would use the generic assignments.

there are strange anomalies in your assignments in any case. Look at the generic ones first:

[Axes]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,2,0,0,0

3=0U,256,D,1,0,0,0

4=1X,256,D,4,0,0,0

5=1Z,256,D,6,0,0,0

6=2X,256,D,7,0,0,0

7=2Y,256,D,8,0,0,0

8=2Z,256,D,3,0,0,0

You have two assignments for both Ailerons (0X, 0U) and Elevators (0Y, 0Z), both on the same joystick device! They'll conflict.

the Jet profile assignments are also odd:

[Axes.Jet]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,1,0,0,0

3=0U,256,D,1,0,0,0

4=1X,256,D,4,0,0,0

5=1Y,256,D,22,0,0,0

6=1Z,256,D,6,0,0,0

7=2X,256,D,7,0,0,0

8=2Y,256,D,8,0,0,0

9=2Z,256,D,3,0,0,0

Here you have 3 (THREE!) assignments to ailerons (0X, 0Z and 0U), and one to elevator (0Y).

I would guess at the very least you'd get some odd things happening, including axes apparently not doing what you thought!

Regards

Pete

Well, I deleted all the axis assignment and profiles manually from FSUIPC.INI then re-programmed the axes. My Saitek throttle quadrant gives the same axis (x and z) for elevators no matter if I click "ignore axis" so I went in and deleted one axis manually after re-programming. I am going to start simple for now without profiles.

thanks again!

Link to comment
Share on other sites

Well, I deleted all the axis assignment and profiles manually from FSUIPC.INI then re-programmed the axes. My Saitek throttle quadrant gives the same axis (x and z) for elevators

Er .. there are no elevators on a throttle quadrant. Do you mean the yoke?

If you are getting two different axes reports for one being moved, then one is jittering (interference), probably caused by poor power. Try to park everything else in a clean dead zone. The ignore axes facility works fine, but only until you finish in the assignments tab.

... so I went in and deleted one axis manually after re-programming.

FSUIPC only ever assigns one axis at a time. You'd only have to delete anything if you personally assigned to both. The axis being assigned is the one declared at the top, no other. It seems to me, from what you say, that you are still misunderstanding something here.

I am going to start simple for now without profiles.

Shame. Profiles are the ideal way of supporting different aircraft types. I think, instead, you simply need to think about what you are doing. Just do one thing at at time. FSUIPC will NOT replace one axis with another once it's recognised one and it most certainly cannot possibly automatically program two at the same time!

Pete

Link to comment
Share on other sites

Er .. there are no elevators on a throttle quadrant. Do you mean the yoke?

If you are getting two different axes reports for one being moved, then one is jittering (interference), probably caused by poor power. Try to park everything else in a clean dead zone. The ignore axes facility works fine, but only until you finish in the assignments tab.

FSUIPC only ever assigns one axis at a time. You'd only have to delete anything if you personally assigned to both. The axis being assigned is the one declared at the top, no other. It seems to me, from what you say, that you are still misunderstanding something here.

Shame. Profiles are the ideal way of supporting different aircraft types. I think, instead, you simply need to think about what you are doing. Just do one thing at at time. FSUIPC will NOT replace one axis with another once it's recognised one and it most certainly cannot possibly automatically program two at the same time!

Pete

I have two Saitek devices attached: a combo yoke/throttle quadrant and a stand-alone throttle quadrant. Thanks for the suggestion about jitter. Even with the combo device attached directly to a motherboard USB port, there was a lot of jitter on the x axis. I moved the deadzone sliders so that all 3 axes on the yoke have the same deadzones. Then I went back into FSUIPC and only the correct axes are now detected by scanning. Too bad that Saitek doesn't provide this kind of trouble-shooting. I have been fighting this problem ever since I bought FSUIPC. Next step will be to try Profiles.

Thanks again, Pete!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.