Jump to content
The simFlight Network Forums

Keysend 1-255


Recommended Posts

Hello all,

For the first time I have the following problem. Want button nr 1 of mu Saitek yoke to activate Teamspeak "pushtotalk" F12. Have always been able to. Not now after motherboard burn out. FSUIPC4 and Widefs& regestered!

System FS:

Windows 7 (64 B)

MS FSX, Asus P8H61 EVO, 8 Gb Ram ddr3, Nvidia 280gtx, 2 1tb HD 6000 Gb (FSUIPC4 installed)

Client :

Vista

Widefs7 client installed.

Could you pleade give me an idea where to look for this?

rgds\

Pieter

Link to comment
Share on other sites

You posted your support question in the FAQ subforum, which is the place where I give answers to "Frequently Asked Questions". I've moved it for you into the proper place, the Support Forum. Lucky I noticed it -- it is easy to miss new posts in the subforums.

For the first time I have the following problem. Want button nr 1 of mu Saitek yoke to activate Teamspeak "pushtotalk" F12. Have always been able to. Not now after motherboard burn out. FSUIPC4 and Widefs& regestered!

...

Could you pleade give me an idea where to look for this?

You've not provided me with any relevant information I'm afraid. To start with you've not even said whether the client is connecting to the server okay.

I also need version numbers of FSUIPC4 and WideClient, Log files for WideServer and Wideclient, and details of the parameters you've entered to use KeySend.

Regards

Pete

Link to comment
Share on other sites

FSUIPC 4.703 sees the connection of both my sub computers. Parameter 1 and 2 used for pessing (Keep pressed to talk). For logs please see attachments.

I didn't need the FSUIPC log, but I need to see the WideClient log, please, and also the [buttons] section of the INI which has your Keysend assigned, and the WideClient INI.

Rather than place links to uploaded files, you can paste them into your messages here. It would be less work for both of us. Attachments are suitable for long files, or non-text files, but otherwise just paste them in. If you like you can use the "code" quotes (the <> button above) to delineate them and maintain their formatting.

Oh, BTW, first check that you set "UseSendInput=Yes" for WideClient. As stated in the WideFS technical guide, in the section on TeamSpeak, this appears to be needed for that program.

Regards

Pete

Link to comment
Share on other sites

I didn't need the FSUIPC log, but I need to see the WideClient log, please, and also the [buttons] section of the INI which has your Keysend assigned, and the WideClient INI.

Rather than place links to uploaded files, you can paste them into your messages here. It would be less work for both of us. Attachments are suitable for long files, or non-text files, but otherwise just paste them in. If you like you can use the "code" quotes (the <> button above) to delineate them and maintain their formatting.

Oh, BTW, first check that you set "UseSendInput=Yes" for WideClient. As stated in the WideFS technical guide, in the section on TeamSpeak, this appears to be needed for that program.

Regards

Pete

Hello Pete,

Hope understood all correct

Wideclient.ini:

<; PLEASE SEE WideFS documentation for parameter details

; =====================================================

[Config]

Port=8002

Window=43,44,886,589

Visible=Yes

; -----------------------------------------------

[user]

Log=Errors+

; ===============================================>

and cannot find Wideclient.log any where!

regards

Pieter

Link to comment
Share on other sites

Wideclient.ini:

That's the default INI file. If you've not added the required parameters to send your keypress it cannot do it!

and cannot find Wideclient.log any where!

In that case you've never even run WideClient, as it ALWAYS makes a log file when run!

Regards

Pete

Link to comment
Share on other sites

Hello Pete,

As I could not find the log, I already guesed that something was wrong. So I disinstalled all of the Widefs and reloaded and reinstalled Widefs7.

With the following results:

Wideclient.ini:

<; PLEASE SEE WideFS documentation for parameter details

; =====================================================

[Config]

Port=8002

Window=43,44,886,589

Visible=Yes

ButtonScanInterval=20

ClassInstance=0

NetworkTiming=5,1

MailslotTiming=2000,1000

PollInterval=2000

Port2=9002

ResponseTime=18

ApplicationDelay=0

TCPcoalesce=No

WaitForNewData=500

MaxSendQ=100

OnMaxSendQ=Log

NewSendScanTime=50

Priority=3,1,2

; -----------------------------------------------

[user]

Log=Errors+

; ===============================================

[sounds]

Path=C:\Program Files\Widefs7\Sound\

Device1=Primary Sound Driver

Device2=Ηχεία (Conexant High Definition SmartAudio 221)>

Wideclient.log:

<********* WideClient Log [version 6.86] Class=FS98MAIN *********

Date (dmy): 18/07/11, Time 04:41:56.909: Client name is PIETERLAPTOP

359 LUA: "C:\Program Files\Widefs7\Initial.LUA": not found

390 Attempting to connect now

1466 Trying to locate server: Need details from Server Broadcast

1466 Failed to connect: waiting to try again

3494 Attempting to connect now

68328 Trying to locate server: Need details from Server Broadcast

326526 Server = PIETERFS

326962 Trying TCP/IP host "PIETERFS" port 8002 ...

326962 ... Okay, IP Address = 192.168.1.107

327150 Connection made okay!

336619 Lost contact with ASE WX requester>

Wideclient0.log:

<********* WideClient Log [version 6.86] Class=FS98MAIN *********

Date (dmy): 17/07/11, Time 04:22:44.538: Client name is PIETERLAPTOP

281 LUA: "C:\Program Files\Widefs7\Initial.LUA": not found

359 Attempting to connect now

1139 Server = PIETERFS

1155 Trying TCP/IP host "PIETERFS" port 8002 ...

1155 ... Okay, IP Address = 192.168.1.107

1170 Connection made okay!

12200 Lost contact with ASE WX requester

79062 FS closing down (param=ADBC), disconnecting

79062 ********* Interim performance summary *********

79062 Total time connected so far = 77 seconds

79062 Reception maximum so far: 31 frames/sec, 798 bytes/sec

79062 Reception average whilst connected so far: 26 frames/sec, 646 bytes/sec

79062 Transmission maximum so far: 0 frames/sec, 21 bytes/sec

79062 Transmission average whilst connected so far: 0 frames/sec, 22 bytes/sec

79062 Max receive buffer = 401, Max send depth = 1, Send frames lost = 0

79062 ***********************************************

79077 Received shutdown offset code = ADBC

83133 Connection closed by server!

83149 Attempting to connect now

84147 Trying to locate server: Need details from Server Broadcast

95255 Giving up server, looking for another!

150697 Trying to locate server: Need details from Server Broadcast

155767 Giving up server, looking for another!

278213 Trying to locate server: Need details from Server Broadcast

292455 Giving up server, looking for another!

466974 Trying to locate server: Need details from Server Broadcast

475086 Giving up server, looking for another!

716076 Trying to locate server: Need details from Server Broadcast

718120 Giving up server, looking for another!

1025988 Trying to locate server: Need details from Server Broadcast

1037157 Giving up server, looking for another!

1396599 Trying to locate server: Need details from Server Broadcast

1401654 Giving up server, looking for another!

1675514 Server = PIETERFS

1675514 Trying TCP/IP host "PIETERFS" port 8002 ...

1675514 ... Okay, IP Address = 192.168.1.107

1675514 Connection made okay!

6571231 Received shutdown offset code = ADBC

6571231 FS closing down (param=ADBC), disconnecting

6571231 ********* Interim performance summary *********

6571231 Total time connected so far = 4971 seconds

6571231 Reception maximum so far: 31 frames/sec, 972 bytes/sec

6571231 Reception average whilst connected so far: 28 frames/sec, 696 bytes/sec

6571231 Transmission maximum so far: 0 frames/sec, 21 bytes/sec

6571231 Transmission average whilst connected so far: 0 frames/sec, 18 bytes/sec

6571231 Max receive buffer = 602, Max send depth = 1, Send frames lost = 1

6571246 ***********************************************

6571293 Received shutdown offset code = ADBC

6577798 Connection closed by server!

6577798 Attempting to connect now

6589997 Giving up server, looking for another!

6730648 Trying to locate server: Need details from Server Broadcast

6741818 Giving up server, looking for another!

7222472 Trying to locate server: Need details from Server Broadcast

7227527 Giving up server, looking for another!

7774872 Trying to locate server: Need details from Server Broadcast

7789037 Giving up server, looking for another!

8388065 Trying to locate server: Need details from Server Broadcast

8396130 Giving up server, looking for another!

9061818 Trying to locate server: Need details from Server Broadcast

9063861 Giving up server, looking for another!

9796645 Trying to locate server: Need details from Server Broadcast

9807721 Giving up server, looking for another!

10591766 Trying to locate server: Need details from Server Broadcast

10596821 Giving up server, looking for another!

11447198 Trying to locate server: Need details from Server Broadcast

11461409 Giving up server, looking for another!

12363984 Trying to locate server: Need details from Server Broadcast

12372019 Giving up server, looking for another!

13341050 Trying to locate server: Need details from Server Broadcast

13343094 Giving up server, looking for another!

14378784 Trying to locate server: Need details from Server Broadcast

14389891 Giving up server, looking for another!

15477234 Trying to locate server: Need details from Server Broadcast

15482288 Giving up server, looking for another!

16636665 Trying to locate server: Need details from Server Broadcast

16650767 Giving up server, looking for another!

17856421 Trying to locate server: Need details from Server Broadcast

17864533 Giving up server, looking for another!

18298933 Server = PIETERFS

18299042 Trying TCP/IP host "PIETERFS" port 8002 ...

18299042 ... Okay, IP Address = 192.168.1.107

18299042 Connection made okay!

26649402 Received shutdown offset code = ADBC

26649464 FS closing down (param=ADBC), disconnecting

26649464 ********* Interim performance summary *********

26649464 Total time connected so far = 13320 seconds

26649464 Reception maximum so far: 31 frames/sec, 972 bytes/sec

26649464 Reception average whilst connected so far: 27 frames/sec, 33 bytes/sec

26649464 Transmission maximum so far: 0 frames/sec, 21 bytes/sec

26649464 Transmission average whilst connected so far: 0 frames/sec, 18 bytes/sec

26649464 Max receive buffer = 602, Max send depth = 1, Send frames lost = 1

26649464 ***********************************************

26649511 Received shutdown offset code = ADBC

26654986 Lost contact with ASE WX requester

26656016 Connection closed by server!

26656016 Attempting to connect now

26668122 Giving up server, looking for another!

27494350 Trying to locate server: Need details from Server Broadcast

27502431 Giving up server, looking for another!

28835600 Trying to locate server: Need details from Server Broadcast

28837612 Giving up server, looking for another!

30237503 Trying to locate server: Need details from Server Broadcast

30248657 Giving up server, looking for another!

31701026 Trying to locate server: Need details from Server Broadcast

31706127 Giving up server, looking for another!

33225499 Trying to locate server: Need details from Server Broadcast

33239648 Giving up server, looking for another!

34809627 Trying to locate server: Need details from Server Broadcast

34817692 Giving up server, looking for another!

36454938 Trying to locate server: Need details from Server Broadcast

36456982 Giving up server, looking for another!

38160669 Trying to locate server: Need details from Server Broadcast

38171823 Giving up server, looking for another!

39927364 Trying to locate server: Need details from Server Broadcast

39932419 Giving up server, looking for another!

41755103 Trying to locate server: Need details from Server Broadcast

41769268 Giving up server, looking for another!

43642778 Trying to locate server: Need details from Server Broadcast

43650890 Giving up server, looking for another!

45591651 Trying to locate server: Need details from Server Broadcast

45593664 Giving up server, looking for another!

47601163 Trying to locate server: Need details from Server Broadcast

47612379 Giving up server, looking for another!

49671327 Trying to locate server: Need details from Server Broadcast

49676428 Giving up server, looking for another!

51802129 Trying to locate server: Need details from Server Broadcast

51816294 Giving up server, looking for another!

53994832 Trying to locate server: Need details from Server Broadcast

54002929 Giving up server, looking for another!

54297443 Server = PIETERFS

54297443 Trying TCP/IP host "PIETERFS" port 8002 ...

54297443 ... Okay, IP Address = 192.168.1.107

54297443 Connection made okay!

54306788 Lost contact with ASE WX requester

58457912 Timed out response: connection assumed lost!

58457959 Ready to try connection again

58457959 Timed out response: connection assumed lost!

58460002 Attempting to connect now

58460642 Server = PIETERFS

58460657 Trying TCP/IP host "PIETERFS" port 8002 ...

58460657 ... Okay, IP Address = 192.168.1.107

58460657 Connection made okay!

58478754 Timed out response: connection assumed lost!

58478754 Ready to try connection again

58478816 Timed out response: connection assumed lost!

58480813 Attempting to connect now

58481593 Server = PIETERFS

58481593 Trying TCP/IP host "PIETERFS" port 8002 ...

58481593 ... Okay, IP Address = 192.168.1.107

58481608 Connection made okay!

58499845 Timed out response: connection assumed lost!

58499845 Ready to try connection again

58499892 Timed out response: connection assumed lost!

58501889 Attempting to connect now

58502591 Server = PIETERFS

58502591 Trying TCP/IP host "PIETERFS" port 8002 ...

58502591 ... Okay, IP Address = 192.168.1.107

58502606 Connection made okay!

58520718 Timed out response: connection assumed lost!

58520718 Ready to try connection again

58520765 Timed out response: connection assumed lost!

58522761 Attempting to connect now

58523604 Server = PIETERFS

58523604 Trying TCP/IP host "PIETERFS" port 8002 ...

58523604 ... Okay, IP Address = 192.168.1.107

58523604 Connection made okay!

58541794 Timed out response: connection assumed lost!

58541794 Ready to try connection again

58541856 Timed out response: connection assumed lost!

58543853 Attempting to connect now

58544602 Server = PIETERFS

58544602 Trying TCP/IP host "PIETERFS" port 8002 ...

58544602 ... Okay, IP Address = 192.168.1.107

58544602 Connection made okay!

58562682 Timed out response: connection assumed lost!

58562682 Ready to try connection again

58562729 Timed out response: connection assumed lost!

58564726 Attempting to connect now

58565599 Server = PIETERFS

58565599 Trying TCP/IP host "PIETERFS" port 8002 ...

58565599 ... Okay, IP Address = 192.168.1.107

58565599 Connection made okay!

58583758 Timed out response: connection assumed lost!

58583758 Ready to try connection again

58583805 Timed out response: connection assumed lost!

58585801 Attempting to connect now

58586597 Server = PIETERFS

58586597 Trying TCP/IP host "PIETERFS" port 8002 ...

58586597 ... Okay, IP Address = 192.168.1.107

58586597 Connection made okay!

58600715 Error on client post-Connection Select() [Error=10053] Software caused connection abort

58600715 Connection closed by server!

58600715 The connection was terminated due to a time-out or other failure!

58600809 Attempting to connect now

58612977 Giving up server, looking for another!

58633507 ****** End of session performance summary ******

58633507 Total time connected = 17602 seconds

58633507 Reception maximum: 31 frames/sec, 1057 bytes/sec

58633507 Reception average whilst connected: 26 frames/sec, 168 bytes/sec

58633507 Transmission maximum: 0 frames/sec, 94 bytes/sec

58633507 Transmission average whilst connected: 0 frames/sec, 18 bytes/sec

58633507 Max receive buffer = 641, Max send depth = 1, Send frames lost = 3

58633507 ********* Log file closed (Buffers: MaxUsed 2, Alloc 470111 Freed 470111 Refused 0) *********>

But still no joy with the yoke button!

regards,

Pieter

Edited by veelo
Link to comment
Share on other sites

As I could not find the log, I already guesed that something was wrong. So I disinstalled all of the Widefs and reloaded and reinstalled Widefs7.

Assuming you mean WideClient (WideFS7 is really the server part of FSUIPC4) that wouldn't make any difference. There was nothing wrong with the last install except that you weren't actually running the program at all (hence no log), and the INI file had not been configured to do what you want!

You not only need to install WideClient on the client PC, but you have to edit the INI file in order to tell it what to do when it sees your KeySend. All you've posted are files showing that at least this time you actualy rann WideClient, but that you still have not done anything to make your PTT work at all.

But still no joy with the yoke button!

It isn't surprising, is it, when WideClient has no idea what you want to do because you've not told it anything at all?

Regards

Pete

Link to comment
Share on other sites

<You not only need to install WideClient on the client PC, but you have to edit the INI file in order to tell it what to do when it sees your KeySend. All you've posted are files showing that at least this time you actualy rann WideClient, but that you still have not done anything to make your PTT work at all.>

Hello Pete,

Sorry, but now I'm realy LOST! Before my motherboard burned out everything was running fine. I do remember some editing for F12 but that was with the FS9 version. I do not remember editing Wideclient with FSX. Please help me out as looking it up in Google and even here gets me in all kinds of twists.

regards

Pieter

Link to comment
Share on other sites

Sorry, but now I'm realy LOST! Before my motherboard burned out everything was running fine. I do remember some editing for F12 but that was with the FS9 version. I do not remember editing Wideclient with FSX.

There is no change in WideClient between FS9 and FSX. There's only the one version of WideClient which can talk to ANY version of FS! You MUST have inserted the correct parameters in your INI file for it to ever work at all. You didn't have to change anything in the Client for FSX.

Please help me out as looking it up in Google and even here gets me in all kinds of twists.

Google? Why use Google? Why not just use the documentation supplied with wideFS? Look in the WideFS technical document for the section entitled:

PTT (push to talk) for Roger Wilco, AVC and TeamSpeak

and be sure to note the subsection there about TeamSpeak.

All I know about driving these programs is there. I don't use any of that stuff myself.

BTW, I did mention the WideFS technical guide and the bit about TeamSpeak in this thread two days ago, but you seem to have ignored that. :-(

Regards

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.