Jump to content
The simFlight Network Forums

Question about FSUIPC and Simconnect


Recommended Posts

Pete,

I have a question but I don't know if you are the right person to ask......but let me try.....:have been running for several months until a couple of days ago ASE and IVAP on a networked laptop with no issues.

All of a sudden it looks like Simconnect has stopped working properly: ASE does not any longer inject weather into FSX and IVAP "cannot find FSX".

Apparently everything seems to be fine: all files are located where they should be, MS Firewall is properly configured, network comunication between server and client is OK, widefs is ok....and so on...

This is what I have from FSUIPC.log.

********* FSUIPC4, Version 4.749d by Pete Dowson *********

User Name="USER"

User Addr="USER"

FSUIPC4 Key is provided

WideFS7 Key is provided

Running inside FSX on Windows 7

Module base=61000000

63 System time = 04/12/2011 13:31:01

63 FLT UNC path = "\\USER\Documents\File di Flight Simulator X\"

94 Trying to connect to SimConnect Acc/SP2 Oct07 ...

94 FS UNC path = "\\USER\Microsoft Flight Simulator X\"

312 LogOptions=00000000 00000001

312 Wind smoothing fix is fully installed

312 G3D.DLL fix attempt installed ok

312 SimConnect_Open succeeded: waiting to check version okay

312 Trying to use SimConnect Acc/SP2 Oct07

889 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)

889 Initialising SimConnect data requests now

889 FSUIPC Menu entry added

905 \\USER\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT

905 \\USER\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR

60591 Aircraft="Aircreation582SL red"

60591 System time = 04/12/2011 13:32:02, Simulator time = 11:43:13 (11:43Z)

63929 Starting everything now ...

67471 Advanced Weather Interface Enabled

116595 Sim stopped: average frame rate for last 55 secs = 24.8 fps

129840 Weather Mode now = Theme

129840 \\USER\AppData\Roaming\Microsoft\FSX\Volo precedente.FLT

Does it tell anything related to my issue ?

I would appreciate a suggestion on how to proceed..

Thanks a lot

Regards

Link to comment
Share on other sites

All of a sudden it looks like Simconnect has stopped working properly: ASE does not any longer inject weather into FSX and IVAP "cannot find FSX".

...

This is what I have from FSUIPC.log.

The FSUIPC log shows everything okay. Are you running ASE and IVAP on the same PC as FSX? If not check the SimConnect.xml file on the FSX PC and the Simconnect.cfg file on the client.

If you are running FSX "as administrator, try it normal, and vice versa.

Regards

Pete

Link to comment
Share on other sites

Pete,

thanks for the reply.

I have ASE and IVAp running in remote on a networked laptop.

These are my Simconnect.xml file on the server PC (FSX)...

<?xml version="1.0" encoding="Windows-1252" ?>

- <SimBase.Document Type="SimConnect" version="1,0">

<Descr>SimConnect</Descr>

<Filename>SimConnect.xml</Filename>

<Disabled>False</Disabled>

- <SimConnect.Comm>

<Disabled>False</Disabled>

<Protocol>IPv4</Protocol>

<Scope>global</Scope>

<Address>192.168.0.2</Address>

<Port>500</Port>

<MaxClients>10</MaxClients>

<MaxRecvSize>4096</MaxRecvSize>

<DisableNagle>False</DisableNagle>

</SimConnect.Comm>

- <SimConnect.Comm>

<Disabled>False</Disabled>

<Protocol>Auto</Protocol>

<Scope>local</Scope>

</SimConnect.Comm>

</SimBase.Document>

[simConnect]

Protocol=IPv4

Address=192.168.0.2

Port=500

MaxReceiveSize=4096

DisableNagle=0

They seem to be ok.....I just can't figure out what happened...

Maybe is just a coincidence but the issue started immediately after I had a hard PC shutdown (server PC) due to an electrical supply loss in the house while I was flying....

Any other suggestion ?

Thanks again

Regards

Link to comment
Share on other sites

I have ASE and IVAp running in remote on a networked laptop.

These are my Simconnect.xml file on the server PC (FSX)...

Is the IP address of your Server PC definitely (still) 192.168.0.2 ?

Maybe is just a coincidence but the issue started immediately after I had a hard PC shutdown (server PC) due to an electrical supply loss in the house while I was flying....

Maybe a spike blew your network. But didn't you say WideFS was connecting okay?

Pete

Link to comment
Share on other sites

Is the IP address of your Server PC definitely (still) 192.168.0.2 ?

Maybe a spike blew your network. But didn't you say WideFS was connecting okay?

Pete

Yes, the address is still the same......and WideFS is connecting OK...so it is not a network issue....everything seem at its right place...I am puzzled...!

Link to comment
Share on other sites

OK...I fixed it....I reinstalled SDK and simconnect on the client PC and it was OK....now both ASE and IVAP are back on .....quite frankly I don't know what happened...

Thanks for your time anyway...

Hmmm. Sounds as if somehow the client's SimConnect installation got corrupted. Glad you solved it.

Pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.