swadeepc Posted August 6, 2013 Report Share Posted August 6, 2013 Hi Pete. I have been told to contact you from PMDG. I am trying to find solution to this problem. Please bear with me and see details below. Look forward to your help. I am using latest FSUIPC paid version by the way. Do you have the latest version of FSUIPC installed? Make sure you have the latest update and if the problem continues you may need to get in touch with Pete Dowson and see what he recommends. Paul Gollnick Technical Support PMDG Simulations, LLC www.precisionmanuals.com From: Swadeep Chansrichavala Sent: Mon, 05 Aug 2013 06:37:17 -0500 To: PMDG Technical Support Desk Subject: Re: [2C7-198FE28D-0439] autobrakes problem Hi. Yes if i don't calibrate brakes via FSUIPC then all is well. Once i do then same problem? How do i solve this?Thank YouBest RegardsSwadeep Chansrichavala On Aug 05, 2013, at 10:54 AM, PMDG Technical Support Desk You may need to remove or edit the Brake Pedal items out of the file temporarily and then place it back and see if the problem remains resolved. Either that or you can simply create a new clean file instead. Paul GollnickTechnical SupportPMDG Simulations, LLCwww.precisionmanuals.com From: Swadeep Chansrichavala Sent: Sun, 04 Aug 2013 08:52:14 -0500To: PMDG Technical Support Desk Subject: Re: [2C7-198FE28D-0439] autobrakes problem Hi.Thanks for your reply. I have tried as you suggested and i think that solved the problem! The question is all my flight controls assignments to the rudder and joysticks are gone now. What do i do next?Thank YouBest RegardsSwadeep ChansrichavalaOn Aug 04, 2013, at 09:44 AM, PMDG Technical Support Desk wrote:Swadeep,We have had users report problems when using the Brake Axis via FSUIPC under some circumstances. Can you please try renaming or deleting your FSUIPC.ini file and see if the issue persists. Paul GollnickTechnical SupportPMDG Simulations, LLCwww.precisionmanuals.com Sent: Sat, 03 Aug 2013 10:47:25 -0500To: Product SupportSubject: autobrakes problemHi there. I would like to ask if anyone is having the same problem as me and maybe if can help me. Basically everything is working fine but after landing when i vacated runway i set AUTOBRAKE to zero and the aircraft suddenly apply max brake until it comes to a complete stop. I even tried RTO and when i tapped brakes the autobrake disarm which is normal but when i set it to zero it applies max brake again. could someone help me please thanks...i do all my assignments via FSUIPC by the way...none in FS...use saitek rudder pedals..tried unplugging it and problem still persist.thanksswadeep From: Product SupportSent: Sat, 03 Aug 2013 21:44:57 -0500Subject: [2C7-198FE28D-0439] autobrakes problem Swadeep, We have had users report problems when using the Brake Axis via FSUIPC under some circumstances. Can you please try renaming or deleting your FSUIPC.ini file and see if the issue persists. Paul GollnickTechnical SupportPMDG Simulations, LLCwww.precisionmanuals.com Sent: Sat, 03 Aug 2013 10:47:25 -0500To: Product SupportSubject: autobrakes problem Hi there. I would like to ask if anyone is having the same problem as me and maybe if can help me. Basically everything is working fine but after landing when i vacated runway i set AUTOBRAKE to zero and the aircraft suddenly apply max brake until it comes to a complete stop. I even tried RTO and when i tapped brakes the autobrake disarm which is normal but when i set it to zero it applies max brake again. could someone help me please thanks...i do all my assignments via FSUIPC by the way...none in FS...use saitek rudder pedals..tried unplugging it and problem still persist.thanksswadeep From: Product Support Sent: Sun, 04 Aug 2013 22:54:14 -0500 Subject: [2C7-198FE28D-0439] autobrakes problem You may need to remove or edit the Brake Pedal items out of the file temporarily and then place it back and see if the problem remains resolved. Either that or you can simply create a new clean file instead. Paul Gollnick Technical Support PMDG Simulations, LLC www.precisionmanuals.com Sent: Sun, 04 Aug 2013 08:52:14 -0500 Subject: Re: [2C7-198FE28D-0439] autobrakes problem Hi. Thanks for your reply. I have tried as you suggested and i think that solved the problem! The question is all my flight controls assignments to the rudder and joysticks are gone now. What do i do next?Thank YouBest RegardsSwadeep Chansrichavala On Aug 04, 2013, at 09:44 AM, PMDG Technical Support Desk wrote: Swadeep, We have had users report problems when using the Brake Axis via FSUIPC under some circumstances. Can you please try renaming or deleting your FSUIPC.ini file and see if the issue persists. Paul GollnickTechnical SupportPMDG Simulations, LLCwww.precisionmanuals.com Sent: Sat, 03 Aug 2013 10:47:25 -0500To: Product SupportSubject: autobrakes problem Hi there. I would like to ask if anyone is having the same problem as me and maybe if can help me. Basically everything is working fine but after landing when i vacated runway i set AUTOBRAKE to zero and the aircraft suddenly apply max brake until it comes to a complete stop. I even tried RTO and when i tapped brakes the autobrake disarm which is normal but when i set it to zero it applies max brake again. could someone help me please thanks...i do all my assignments via FSUIPC by the way...none in FS...use saitek rudder pedals..tried unplugging it and problem still persist.thanksswadeep From: Product Support Sent: Sat, 03 Aug 2013 21:44:57 -0500 Subject: [2C7-198FE28D-0439] autobrakes problem Swadeep, We have had users report problems when using the Brake Axis via FSUIPC under some circumstances. Can you please try renaming or deleting your FSUIPC.ini file and see if the issue persists. Paul Gollnick Technical Support PMDG Simulations, LLC www.precisionmanuals.com Sent: Sat, 03 Aug 2013 10:47:25 -0500 To: Product Support Subject: autobrakes problem Hi there. I would like to ask if anyone is having the same problem as me and maybe if can help me. Basically everything is working fine but after landing when i vacated runway i set AUTOBRAKE to zero and the aircraft suddenly apply max brake until it comes to a complete stop. I even tried RTO and when i tapped brakes the autobrake disarm which is normal but when i set it to zero it applies max brake again. could someone help me please thanks...i do all my assignments via FSUIPC by the way...none in FS...use saitek rudder pedals..tried unplugging it and problem still persist. thanksswadeep Thanks Best Regards Swadeep Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 6, 2013 Report Share Posted August 6, 2013 Hi Pete. I have been told to contact you from PMDG. I am trying to find solution to this problem. Please bear with me and see details below. Look forward to your help. I am using latest FSUIPC paid version by the way. You should simply state the problem. No way can FSUIPC change the brake axes when you simply disarm the autobrake. PMDG are fobbing you off. If you want me to look at it I need to know a lot more. Most things in the NGX do not use standard FSX controls at all, so I assume the same is true of the Autobrakes, and i have no idea what you are doing there, but if setting A/B = 0 applies brakes there's something wrong with that assignment or a bug in whatever is applying autobrakes. I suggest you use FSUIPC's logging facilities. First make sure your FSUIPC is up to date. The currently supported one on FSX is 4.91. Enable button logging and both normal and axis event logging, but Not until you are about to "vacate the runway and set AUTOBRAKE to zero ..." I suggest you get to that point, pause, enter the FSUIPC options and enable those logging items, OK out and release pause, do your thing, then pause and turn the logging off. If you don't do this there will be far too much logged to make head or tail of. I am away after tomorrow (Wednesday) till Tuesday next, so if you can't get back with this within a day it's going to have to wait. Regards Pete Link to comment Share on other sites More sharing options...
swadeepc Posted August 6, 2013 Author Report Share Posted August 6, 2013 Thanks for reply. I apologize for bombarding you with perhaps unnecessary information. Anyway i did what you suggested but i am not sure this is right so please have a look at the logfile below. ********* FSUIPC4, Version 4.91 by Pete Dowson ********* Running inside FSX on Windows 7 Module base=64210000 User Name="Swadeep Chansrichavala" User Addr="schansrichavala@hotmail.com" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 16 System time = 06/08/2013 22:12:01 16 FLT path = "C:\Users\SWADEEP-FS\Documents\Flight Simulator X Files\" 47 Trying to connect to SimConnect Acc/SP2 Oct07 ... 63 FS path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 297 LogOptions=00000000 00000001 297 SIM1 Frictions access gained 312 Wind smoothing fix is fully installed 312 G3D.DLL fix attempt installed ok 312 SimConnect_Open succeeded: waiting to check version okay 312 Trying to use SimConnect Acc/SP2 Oct07 983 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 983 Initialising SimConnect data requests now 983 FSUIPC Menu entry added 1014 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 1014 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 17925 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR 45646 System time = 06/08/2013 22:12:46, Simulator time = 13:12:04 (06:12Z) 45662 Aircraft="Boeing 737-800NGX EI-EVG" 45974 Starting everything now ... 45974 AES Link established 49468 Advanced Weather Interface Enabled 99451 Sim stopped: average frame rate for last 55 secs = 28.0 fps 242504 Sim stopped: average frame rate for last 43 secs = 29.9 fps 486567 Sim stopped: average frame rate for last 234 secs = 29.7 fps 548796 LogOptions changed, now 70000000 00000001 549826 *** EVENT: Cntrl= 69979 (0x0001115b), Param= 4194304 (0x00400000) <69979> 549857 *** EVENT: Cntrl= 69979 (0x0001115b), Param= 4194304 (0x00400000) <69979> 549904 *** EVENT: Cntrl= 69980 (0x0001115c), Param= 4194304 (0x00400000) <69980> 549935 *** EVENT: Cntrl= 69980 (0x0001115c), Param= 4194304 (0x00400000) <69980> 551261 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 551261 .. Key not programmed -- passed on to FS 551261 *** EVENT: Cntrl= 65561 (0x00010019), Param= 0 (0x00000000) PAUSE_TOGGLE 551370 KEYUP: VK=80, Waiting=0 552244 *** AXIS: Cntrl= 66387 (0x00010353), Param= 16383 (0x00003fff) AXIS_LEFT_BRAKE_SET 552244 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET 553071 *** TOE BRAKE AXIS, Right set = 16 (IN=-13824, OUT=-13826) 553071 *** AXIS: Cntrl= 66388 (0x00010354), Param= -13762 (0xffffca3e) AXIS_RIGHT_BRAKE_SET 553102 *** TOE BRAKE AXIS, Right set = 41 (IN=-9728, OUT=-9730) 553133 *** TOE BRAKE AXIS, Right set = 52 (IN=-7936, OUT=-7938) 553133 *** AXIS: Cntrl= 66388 (0x00010354), Param= -7864 (0xffffe148) AXIS_RIGHT_BRAKE_SET 553164 *** TOE BRAKE AXIS, Right set = 56 (IN=-7168, OUT=-7170) 553195 *** TOE BRAKE AXIS, Right set = 77 (IN=-3840, OUT=-3842) 553195 *** AXIS: Cntrl= 66388 (0x00010354), Param= -3769 (0xfffff147) AXIS_RIGHT_BRAKE_SET 553227 *** TOE BRAKE AXIS, Left set = 69 (IN=-5120, OUT=-5122) 553227 *** TOE BRAKE AXIS, Right set = 100 (IN=0, OUT=-2) 553273 *** TOE BRAKE AXIS, Left set = 171 (IN=11627, OUT=11626) 553273 *** TOE BRAKE AXIS, Right set = 110 (IN=1586, OUT=1584) 553273 *** AXIS: Cntrl= 66387 (0x00010353), Param= 11631 (0x00002d6f) AXIS_LEFT_BRAKE_SET 553273 *** AXIS: Cntrl= 66388 (0x00010354), Param= 1638 (0x00000666) AXIS_RIGHT_BRAKE_SET 553305 *** TOE BRAKE AXIS, Left set = 189 (IN=14534, OUT=14532) 553305 *** TOE BRAKE AXIS, Right set = 111 (IN=1850, OUT=1848) 553305 *** AXIS: Cntrl= 66387 (0x00010353), Param= 14580 (0x000038f4) AXIS_LEFT_BRAKE_SET 553305 *** AXIS: Cntrl= 66388 (0x00010354), Param= 1802 (0x0000070a) AXIS_RIGHT_BRAKE_SET 553336 *** TOE BRAKE AXIS, Left set = 190 (IN=14798, OUT=14796) 553336 *** TOE BRAKE AXIS, Right set = 110 (IN=1586, OUT=1584) 553367 *** TOE BRAKE AXIS, Left set = 150 (IN=8192, OUT=8190) 553367 *** TOE BRAKE AXIS, Right set = 14 (IN=-14080, OUT=-14082) 553367 *** AXIS: Cntrl= 66387 (0x00010353), Param= 8191 (0x00001fff) AXIS_LEFT_BRAKE_SET 553367 *** AXIS: Cntrl= 66388 (0x00010354), Param= -14090 (0xffffc8f6) AXIS_RIGHT_BRAKE_SET 553398 *** TOE BRAKE AXIS, Left set = 0 (IN=-16383, OUT=-16383) 553398 *** TOE BRAKE AXIS, Right set = 0 (IN=-16383, OUT=-16383) 553492 *** EVENT: Cntrl= 66587 (0x0001041b), Param= 361 (0x00000169) ROTOR_BRAKE 553492 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET 553492 *** AXIS: Cntrl= 66387 (0x00010353), Param= 6553 (0x00001999) AXIS_LEFT_BRAKE_SET 553492 *** AXIS: Cntrl= 66388 (0x00010354), Param= -16384 (0xffffc000) AXIS_RIGHT_BRAKE_SET 553570 *** EVENT: Cntrl= 66587 (0x0001041b), Param= 378 (0x0000017a) ROTOR_BRAKE 553570 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET 553570 *** AXIS: Cntrl= 66387 (0x00010353), Param= 4914 (0x00001332) AXIS_LEFT_BRAKE_SET 553632 *** AXIS: Cntrl= 66387 (0x00010353), Param= 3276 (0x00000ccc) AXIS_LEFT_BRAKE_SET 553695 *** AXIS: Cntrl= 66387 (0x00010353), Param= 1638 (0x00000666) AXIS_LEFT_BRAKE_SET 553773 *** AXIS: Cntrl= 66387 (0x00010353), Param= 0 (0x00000000) AXIS_LEFT_BRAKE_SET 553804 *** AXIS: Cntrl= 66387 (0x00010353), Param= -1639 (0xfffff999) AXIS_LEFT_BRAKE_SET 553866 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 553866 *** AXIS: Cntrl= 66387 (0x00010353), Param= -3277 (0xfffff333) AXIS_LEFT_BRAKE_SET 553929 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 553929 *** AXIS: Cntrl= 66387 (0x00010353), Param= -4915 (0xffffeccd) AXIS_LEFT_BRAKE_SET 554007 *** AXIS: Cntrl= 66387 (0x00010353), Param= -6554 (0xffffe666) AXIS_LEFT_BRAKE_SET 554007 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554069 *** AXIS: Cntrl= 66387 (0x00010353), Param= -8192 (0xffffe000) AXIS_LEFT_BRAKE_SET 554100 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554100 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554131 *** AXIS: Cntrl= 66387 (0x00010353), Param= -9830 (0xffffd99a) AXIS_LEFT_BRAKE_SET 554163 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554163 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554194 *** AXIS: Cntrl= 66387 (0x00010353), Param= -11469 (0xffffd333) AXIS_LEFT_BRAKE_SET 554241 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554241 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554241 *** AXIS: Cntrl= 66387 (0x00010353), Param= -13107 (0xffffcccd) AXIS_LEFT_BRAKE_SET 554272 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554303 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554303 *** AXIS: Cntrl= 66387 (0x00010353), Param= -14745 (0xffffc667) AXIS_LEFT_BRAKE_SET 554334 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554334 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554334 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554334 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554365 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554365 *** AXIS: Cntrl= 66387 (0x00010353), Param= -16384 (0xffffc000) AXIS_LEFT_BRAKE_SET 554397 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554428 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554459 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554506 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554537 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554568 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554568 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554599 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554631 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554631 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554631 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554677 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554693 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554740 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554740 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554740 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554740 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554771 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554802 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554802 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 554833 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554865 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554896 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554927 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 554974 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555005 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555036 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555067 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 8192 (0x00002000) <70092> 555099 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555099 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555130 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555161 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555192 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555208 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555239 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555270 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555301 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555333 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555333 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555364 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555395 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555426 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555442 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555473 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555504 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555504 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555535 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555567 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555567 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555598 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555629 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 8192 (0x00002000) <70092> 555676 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555676 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555676 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555676 *** TOE BRAKE AXIS, Left set = 200 (IN=16384, OUT=16384) 555676 *** TOE BRAKE AXIS, Right set = 200 (IN=16384, OUT=16384) 555676 *** Both toe brakes over threshold: FS BRAKES control sent 555676 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 555707 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555707 *** AXIS: Cntrl= 66387 (0x00010353), Param= 16383 (0x00003fff) AXIS_LEFT_BRAKE_SET 555707 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET 555738 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555738 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555769 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555801 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555801 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555832 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555863 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555894 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555894 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555894 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 555925 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 555972 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556003 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556035 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556035 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 556066 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556097 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556128 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556159 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556206 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556237 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556269 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556300 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556331 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556362 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556362 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 556362 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 556362 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 556393 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556440 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556471 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556503 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556534 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556565 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556596 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556643 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556674 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556705 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556737 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556768 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556799 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556893 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556924 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556939 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 556971 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557017 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557049 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557080 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557111 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557142 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557173 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557205 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557251 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557283 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557283 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557314 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557345 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557376 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557376 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557407 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557439 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557439 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557470 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557517 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557517 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557517 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557548 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557579 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557610 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557610 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557610 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557641 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557673 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557673 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557673 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557704 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557751 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557751 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557782 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557813 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557844 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557844 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557844 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557875 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557907 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557907 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557907 *** EVENT: Cntrl= 85638 (0x00014e86), Param= 0 (0x00000000) <85638> 557938 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 557969 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558016 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558047 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558078 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558109 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558141 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558172 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558203 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558250 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558281 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558312 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558343 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558375 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558406 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558453 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558484 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558515 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558546 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558577 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558609 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558640 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558671 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558718 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558749 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558780 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558811 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558843 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558874 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558905 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558952 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 558983 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559014 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559045 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559077 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559108 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559139 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559170 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559217 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559248 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559279 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559311 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559342 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559373 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559404 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559435 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559482 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559513 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559545 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559576 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559607 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559638 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559669 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559716 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559747 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559779 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559810 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559841 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559872 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559903 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559950 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 559981 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560013 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560044 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560075 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560106 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560137 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560184 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560215 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560247 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560278 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560309 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560340 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560371 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560403 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560449 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560481 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560512 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560543 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560574 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560605 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560637 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560683 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560715 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560746 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560777 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560808 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560839 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560871 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560917 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560949 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 560980 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561011 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561042 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561073 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561105 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561136 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561183 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561214 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561245 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561276 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561307 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561339 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561370 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561417 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561448 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561479 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561510 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561541 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561573 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561604 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561651 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561682 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561713 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561744 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561775 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561807 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561838 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561885 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561916 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561947 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 561978 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562009 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562041 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562072 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562103 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562150 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562181 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562181 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 562181 .. Key not programmed -- passed on to FS 562181 *** EVENT: Cntrl= 65561 (0x00010019), Param= 0 (0x00000000) PAUSE_TOGGLE 562212 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562243 *** EVENT: Cntrl= 70092 (0x000111cc), Param= 4194304 (0x00400000) <70092> 562275 KEYUP: VK=80, Waiting=0 562914 *** EVENT: Cntrl= 66587 (0x0001041b), Param= 466 (0x000001d2) ROTOR_BRAKE 562914 *** AXIS: Cntrl= 66162 (0x00010272), Param= 3 (0x00000003) COWLFLAP1_SET 577672 Sim stopped: average frame rate for last 28 secs = 30.0 fps 583179 LogOptions changed, now 00000000 00000001 937675 Weather Mode now = Theme 937675 C:\Users\SWADEEP-FS\AppData\Roaming\Microsoft\FSX\Previous flight.FLT 945164 System time = 06/08/2013 22:27:46, Simulator time = 13:12:02 (06:12Z) 945164 *** FSUIPC log file being closed Average frame rate for running time of 470 secs = 29.6 fps G3D fix: Passes 11719, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 211 Allocs, 211 Freed ********* FSUIPC Log file closed *********** Thanks Swadeep Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 6, 2013 Report Share Posted August 6, 2013 Thanks for reply. I apologize for bombarding you with perhaps unnecessary information. Anyway i did what you suggested but i am not sure this is right so please have a look at the logfile below. Blimey! From the time you started the extra logging to the time you stopped it 30 seconds elapsed. What took so long? In those 30 seconds it looks like simply thoudands of PMDG-dedicated controls were sent. I've no idea what the xxx that program is doing! Most of them sem to be repeats of Cntrl 70092, over 30 times a second by the look of it. Weird. Anyway, the only Brake Axis controls were these: 552244 *** AXIS: Cntrl= 66387 (0x00010353), Param= 16383 (0x00003fff) AXIS_LEFT_BRAKE_SET 552244 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET The first entries logged already show a full brake application. I assume this is down to the way the PMDG aircraft does the AutoBraking. You then used the assigned toe brakes, press then release, thus: 553071 *** TOE BRAKE AXIS, Right set = 16 (IN=-13824, OUT=-13826) 553071 *** AXIS: Cntrl= 66388 (0x00010354), Param= -13762 (0xffffca3e) AXIS_RIGHT_BRAKE_SET 553102 *** TOE BRAKE AXIS, Right set = 41 (IN=-9728, OUT=-9730) 553133 *** TOE BRAKE AXIS, Right set = 52 (IN=-7936, OUT=-7938) 553133 *** AXIS: Cntrl= 66388 (0x00010354), Param= -7864 (0xffffe148) AXIS_RIGHT_BRAKE_SET 553164 *** TOE BRAKE AXIS, Right set = 56 (IN=-7168, OUT=-7170) 553195 *** TOE BRAKE AXIS, Right set = 77 (IN=-3840, OUT=-3842) 553195 *** AXIS: Cntrl= 66388 (0x00010354), Param= -3769 (0xfffff147) AXIS_RIGHT_BRAKE_SET 553227 *** TOE BRAKE AXIS, Left set = 69 (IN=-5120, OUT=-5122) 553227 *** TOE BRAKE AXIS, Right set = 100 (IN=0, OUT=-2) 553273 *** TOE BRAKE AXIS, Left set = 171 (IN=11627, OUT=11626) 553273 *** TOE BRAKE AXIS, Right set = 110 (IN=1586, OUT=1584) 553273 *** AXIS: Cntrl= 66387 (0x00010353), Param= 11631 (0x00002d6f) AXIS_LEFT_BRAKE_SET 553273 *** AXIS: Cntrl= 66388 (0x00010354), Param= 1638 (0x00000666) AXIS_RIGHT_BRAKE_SET 553305 *** TOE BRAKE AXIS, Left set = 189 (IN=14534, OUT=14532) 553305 *** TOE BRAKE AXIS, Right set = 111 (IN=1850, OUT=1848) 553305 *** AXIS: Cntrl= 66387 (0x00010353), Param= 14580 (0x000038f4) AXIS_LEFT_BRAKE_SET 553305 *** AXIS: Cntrl= 66388 (0x00010354), Param= 1802 (0x0000070a) AXIS_RIGHT_BRAKE_SET 553336 *** TOE BRAKE AXIS, Left set = 190 (IN=14798, OUT=14796) 553336 *** TOE BRAKE AXIS, Right set = 110 (IN=1586, OUT=1584) 553367 *** TOE BRAKE AXIS, Left set = 150 (IN=8192, OUT=8190) 553367 *** TOE BRAKE AXIS, Right set = 14 (IN=-14080, OUT=-14082) 553367 *** AXIS: Cntrl= 66387 (0x00010353), Param= 8191 (0x00001fff) AXIS_LEFT_BRAKE_SET 553367 *** AXIS: Cntrl= 66388 (0x00010354), Param= -14090 (0xffffc8f6) AXIS_RIGHT_BRAKE_SET 553398 *** TOE BRAKE AXIS, Left set = 0 (IN=-16383, OUT=-16383) 553398 *** TOE BRAKE AXIS, Right set = 0 (IN=-16383, OUT=-16383) 553492 *** AXIS: Cntrl= 66387 (0x00010353), Param= 6553 (0x00001999) AXIS_LEFT_BRAKE_SET 553492 *** AXIS: Cntrl= 66388 (0x00010354), Param= -16384 (0xffffc000) AXIS_RIGHT_BRAKE_SET 553570 *** AXIS: Cntrl= 66387 (0x00010353), Param= 4914 (0x00001332) AXIS_LEFT_BRAKE_SET 553632 *** AXIS: Cntrl= 66387 (0x00010353), Param= 3276 (0x00000ccc) AXIS_LEFT_BRAKE_SET 553695 *** AXIS: Cntrl= 66387 (0x00010353), Param= 1638 (0x00000666) AXIS_LEFT_BRAKE_SET 553773 *** AXIS: Cntrl= 66387 (0x00010353), Param= 0 (0x00000000) AXIS_LEFT_BRAKE_SET 553804 *** AXIS: Cntrl= 66387 (0x00010353), Param= -1639 (0xfffff999) AXIS_LEFT_BRAKE_SET 553866 *** AXIS: Cntrl= 66387 (0x00010353), Param= -3277 (0xfffff333) AXIS_LEFT_BRAKE_SET 553929 *** AXIS: Cntrl= 66387 (0x00010353), Param= -4915 (0xffffeccd) AXIS_LEFT_BRAKE_SET 554007 *** AXIS: Cntrl= 66387 (0x00010353), Param= -6554 (0xffffe666) AXIS_LEFT_BRAKE_SET 554069 *** AXIS: Cntrl= 66387 (0x00010353), Param= -8192 (0xffffe000) AXIS_LEFT_BRAKE_SET 554131 *** AXIS: Cntrl= 66387 (0x00010353), Param= -9830 (0xffffd99a) AXIS_LEFT_BRAKE_SET 554194 *** AXIS: Cntrl= 66387 (0x00010353), Param= -11469 (0xffffd333) AXIS_LEFT_BRAKE_SET 554241 *** AXIS: Cntrl= 66387 (0x00010353), Param= -13107 (0xffffcccd) AXIS_LEFT_BRAKE_SET 554303 *** AXIS: Cntrl= 66387 (0x00010353), Param= -14745 (0xffffc667) AXIS_LEFT_BRAKE_SET 554365 *** AXIS: Cntrl= 66387 (0x00010353), Param= -16384 (0xffffc000) AXIS_LEFT_BRAKE_SET which as you can from the BOLD entries see eventually left both left and right brakes fully off. This is a mere 2 seconds or so into the sequence. But then it looks like you, or something, presses the brakes fully. This is just over a second later: 555676 *** TOE BRAKE AXIS, Left set = 200 (IN=16384, OUT=16384) 555676 *** TOE BRAKE AXIS, Right set = 200 (IN=16384, OUT=16384) 555676 *** Both toe brakes over threshold: FS BRAKES control sent 555676 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 555707 *** AXIS: Cntrl= 66387 (0x00010353), Param= 16383 (0x00003fff) AXIS_LEFT_BRAKE_SET 555707 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET Now both brakes are fully on. What pedals are you using? Are they calibrated correctly? Do they behave okay normally, eg, when taxiing? Maybe you need to show me your FSUIPC INI file. And do you have any Lua plug-ins running at all, like LINDA or anything like that? Pete Link to comment Share on other sites More sharing options...
swadeepc Posted August 6, 2013 Author Report Share Posted August 6, 2013 I am using Saitek combat rudder pedals and yes i am pretty sure they are calibrated properly because i never had any problem with other aircrafts or previous rudder pedals. Infact i was using logitech G490 before this and i experienced the same problem and also with the pmdg 737ngx. Taxi and everything seems normal to me and all works fine. I don't use any LUA plug-ins or LINDA as i have no clue what they are also to be honest. anyway here's the ini file. [General] UpdatedByVersion=4910 History=ULU4YH38TBO5WV0TITM7Q MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=No PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=0 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No InitDelayDevicesToo=No UseMidMouseBtn=Yes OOMcheck=Yes UseSystemTime=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Combat Rudder Pedals 0.GUID={10DD8870-BCE6-11E2-8003-444553540000} 1=Throttle - HOTAS Warthog 1.GUID={10DD3A50-BCE6-11E2-8002-444553540000} 2=Joystick - HOTAS Warthog 2.GUID={10DCEC30-BCE6-11E2-8001-444553540000} [buttons] ButtonRepeat=20,10 3=P0,1,C65580,0 4=R0,8,C65615,0 5=R0,6,C65607,0 6=P0,10,C66079,0 7=P0,12,C66080,0 8=P1,14,C65861,0 9=P1,10,C65860,0 11=R1,28,C65602,0 12=U1,28,C65604,0 13=P1,22,C65758,0 14=P1,21,C65759,0 17=P1,15,K113,11 18=U1,15,K112,11 19=P1,16,K115,11 20=U1,16,K114,11 21=R2,8,C65615,0 22=U2,8,C0,0 23=R2,6,C65607,0 28=P2,10,C66079,0 29=P2,12,C66080,0 [AutoSave] Next=7 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No 1=Mon 181631 2=Mon 181730 3=Mon 181830 4=Mon 181929 5=Mon 182029 6=Mon 182128 7=Mon 180934 8=Mon 181233 9=Mon 181432 10=Mon 181531 [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= SimModeIndicator=No [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= SimModeIndicator=No [WideServer] WideFSenabled=Yes [sounds] Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=Speakers (ASUS Xonar Xense Audio Device) Device3=S27B550-2 (NVIDIA High Definition Audio) Device4=S27B550-3 (NVIDIA High Definition Audio) Device5=S27B550-1 (NVIDIA High Definition Audio) Device6=S/PDIF Pass-through Device (ASUS Xonar Xense Audio Device) Device7=Realtek Digital Output (Realtek High Definition Audio) Device8=Realtek Digital Output(Optical) (Realtek High Definition Audio) [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16383 Elevator=-16384,0,0,16383 Throttle=-16384,16383 Rudder=-16384,0,0,16383 LeftBrake=-16383,16384/16 RightBrake=-16383,16384/16 SlopeAileron=8 SlopeRudder=8 [Axes] 0=0X,256,F,66387,0,0,0 1=0X,BR,0,0,66387,0 2=0Y,256,F,66388,0,0,0 3=0Y,BR,0,0,66388,0 4=0R,256,F,65764,0,0,0 5=0R,BR,0,0,65764,0 6=1R,256,F,65765,0,0,0 7=1R,BR,0,0,65765,0 8=2X,256,F,65763,0,0,0 9=2X,BR,0,0,65763,0 10=2Y,256,F,65762,0,0,0 11=2Y,BR,0,0,65762,0 12=2R,256,F,65764,0,0,0 13=2R,BR,0,0,65764,0 [Monitor] i pray that this problem can be solved! thanks swadeep Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 6, 2013 Report Share Posted August 6, 2013 i pray that this problem can be solved! I don't understand your axis assignments. For every one, all assigned to FS contorls rather than "direct to FSUIPC", you also have a strange Range control set, for the same FS axis control, but no range actually set. Why? The lines shown red below are never right. [Axes] 0=0X,256,F,66387,0,0,0 1=0X,BR,0,0,66387,0 2=0Y,256,F,66388,0,0,0 3=0Y,BR,0,0,66388,0 4=0R,256,F,65764,0,0,0 5=0R,BR,0,0,65764,0 6=1R,256,F,65765,0,0,0 7=1R,BR,0,0,65765,0 8=2X,256,F,65763,0,0,0 9=2X,BR,0,0,65763,0 10=2Y,256,F,65762,0,0,0 11=2Y,BR,0,0,65762,0 12=2R,256,F,65764,0,0,0 13=2R,BR,0,0,65764,0 You must be in the habit of checking something on the right-hand sde of the assignments tab, the area specifically designed to allow controls to be assigned to ranges of the axis. Delete those red lines and try again. I really have no idea if it'll help, but those certainly won't be doing anything good. If that doesn't help, try assigning the brakes direct ot FSUIPC instead. I'm surprised you've not used that technique for all the axes -- your assignments are exactly the same as assigning them in FS instead of FSUIPC. The calibration applies no matter where you assign. Finally, these "calibrations": Aileron=-16384,0,0,16383 Elevator=-16384,0,0,16383 Throttle=-16384,16383 Rudder=-16384,0,0,16383 LeftBrake=-16383,16384/16 RightBrake=-16383,16384/16 are actually all default settings except for the reversal of the brakes. It appears you've never actually followed any of the recommendations in the User Guide, the numbered staps to good calibration. So all in all your use of FSUIPC is actually identical to not using it (for axes) at all. It would be absolutely no different if you used FS assignments and no FSUIPC calibrations. Regards Pete Link to comment Share on other sites More sharing options...
swadeepc Posted August 6, 2013 Author Report Share Posted August 6, 2013 Hi. I usually assign all axis via fs also but only recently I just tried assign via fsuipc instead I did try to go back and test but even if I assigned via normal fsx axes the same thing happens. Anyway I will try as you suggested and also I will try to read user guide again and see how it goes. I will report back. Thanks Swadeep Link to comment Share on other sites More sharing options...
swadeepc Posted August 6, 2013 Author Report Share Posted August 6, 2013 I don't understand what you mean by checking right handside also. I click axis assignment tab on fsuipc. Say I move joystick Y axis then I select on the left drop down and choose axis elevator assignment. On the right I select4 fs control also and selecr axis elevator again and ticked the box below which is control repeat something. Maybe I am doing it wrong but I got those off airbus x forum also. Anyway will try again. Thank swadeep Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 6, 2013 Report Share Posted August 6, 2013 I don't understand what you mean by checking right handside also. I click axis assignment tab on fsuipc. Say I move joystick Y axis then I select on the left drop down and choose axis elevator assignment. On the right I select4 fs control also and selecr axis elevator again and ticked the box below which is control repeat something. Maybe I am doing it wrong ... Yes you are. The LEFT hands side is assignment to the axis, the RIGHT hand side is clearly marked out for setting DIFFERENT controls to be sent in specific ranges along the axis. You wouldn't usually use both. didn't you even think it mildly odd to be assigning the exact same control to the same axis in two different places? Why would you think that normal at all? Folks have used the right hand side for Gear Up/ Off /Down on an axis, for example. Up to 10 ranges can be set so it's also useful for Flaps, instead maybe of using the flaps detebntes facility. The documentation does cover all this. Worth a read some day, perhaps? ;-) Pete Link to comment Share on other sites More sharing options...
swadeepc Posted August 7, 2013 Author Report Share Posted August 7, 2013 Yes. I am sorry for troubling your time. I will of course go through the manual again and see what i can do. i will try sort this out and report back. I am aware you're away for a week so hopefully i can have good news by the time you're back. Thanks Swadeep Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 7, 2013 Report Share Posted August 7, 2013 Yes. I am sorry for troubling your time. No trouble. I am actually concerned about what could be causing this. Maybe a different way of assighning the toe brakes will do the trick, I don't know. Currnetly it is a mystery, presumably wraped up in the methods PMDG are using to simulate the autobrake operation. i will try sort this out and report back. I am aware you're away for a week so hopefully i can have good news by the time you're back. Okay. If it isn't sorted I'll have to think of other ways of delving into the events which occur. I'm sure there are lots of folks using the NGX and with FSUIPC exclusively for assignments, so there must be a solution. Regards Pete Link to comment Share on other sites More sharing options...
swadeepc Posted August 13, 2013 Author Report Share Posted August 13, 2013 Hi Pete. I think i have sorted out the problem. What i did was: 1. Remove all assignments in FSUIPC and started from scratch. 2. Assigned it all again (elevator, ailerons, throttle, rudder, left brake and right brake) on the "left side only" of the assignment page. Before doing that I click to send directly to FSUIPC first. 2 flights done and all is well. Hopefully no more problems. Will report back if any. Thank You again for all your help. Really appreciate it. Thanks Swadeep Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now