macwino Posted December 4, 2013 Report Share Posted December 4, 2013 I think this is more a P3D or A2A C172 problem than an fsuipc problem, but I thought I would post just in case anyone has some thoughts on what the problem might be. I am running the very latest fsuipc designed for P3D v2. I got the A2A C172 into P3D using the Estonian Migration Tool. The plane responds to my axes assignments and their calibration. However, it does not recognize any of my yoke and TQ button commands. I have controllers disabled in P3D. I am old school and use customized fsuipc.ini entries for each plane, not profiles. I just copied over my A2A C172 button, axes, and calibration settings from FSX to P3D for this plane. The ini section headings for the plane all use the same title for the plane and match up with the Title in the aircraft.cfg. For some reason, however, my yoke and TQ see the fsuipc axes assignments but do not see the fsuipc button assignments. I have brought into P3D one other plane from FSX - the Aerosoft Twin Otter -and it has not experienced this problem. All the button and axes assignments are recognized by the plane. Thanks, Robert Link to comment Share on other sites More sharing options...
Pete Dowson Posted December 5, 2013 Report Share Posted December 5, 2013 I think this is more a P3D or A2A C172 problem than an fsuipc problem, but I thought I would post just in case anyone has some thoughts on what the problem might be. I am running the very latest fsuipc designed for P3D v2. I got the A2A C172 into P3D using the Estonian Migration Tool. The plane responds to my axes assignments and their calibration. However, it does not recognize any of my yoke and TQ button commands. I have controllers disabled in P3D. I am old school and use customized fsuipc.ini entries for each plane, not profiles. I just copied over my A2A C172 button, axes, and calibration settings from FSX to P3D for this plane. The ini section headings for the plane all use the same title for the plane and match up with the Title in the aircraft.cfg. For some reason, however, my yoke and TQ see the fsuipc axes assignments but do not see the fsuipc button assignments. I have brought into P3D one other plane from FSX - the Aerosoft Twin Otter -and it has not experienced this problem. All the button and axes assignments are recognized by the plane. Hmm. Strange. Use the logging facilities in FSUIPC to make sure it is doing the right thing. If you check against Button logging and Event logging it should show you exactly what it is doing. If you (temporarily) run P3D in Windowed mode you can also check the Console Log option and see it happen in real time. Regards Pete Link to comment Share on other sites More sharing options...
macwino Posted December 15, 2013 Author Report Share Posted December 15, 2013 OK, I've been able to diagnose what I believe is the source of the problem. It has nothing to do with the A2A C172. I I think the problem lies with P3D and how it's interacting with fsuipc. The Button, Axis and Calibration sections were read for the Twin Otter because my ini had full instructions for all commands contained in the relevant sections. However, for single engine planes I use a default set of ini settings for these three sections. Then, for each such plane, I have a separate ini button section that is aircraft specific and that generally handles the yoke keys that control the Shift+n popups, which usually differ from plane to plane. With the A2A C172 it turns out I was able to access all of the aircraft specific ini commands (usually there are just 4 lines of commands) but none of the ini commands contained in the default button ini section. However, if I copied the default button ini commands into the aircraft specific button ini section for the A2A C172, then I had access to the commands. I have found that this is the case for any single engine plane that I install in P3D v2. My default Axis and Calibration ini settings are recognized. My aircraft specific Button ini settings are recognized. But my default Button ini settings are not recognized. One other thing of note, I do not have the aircraft specific ini button commands override those in the default set of button ini commands. The aircraft specific button commands are for unique buttons on my yoke that are not assigned in the default button ini section. So what I have is the default Axis and Calibration settings being recognized but not the default Button settings. Any thoughts? I can obviously live with just expanding the aircraft specific button section in the ini to contain all the settings found in the default button ini section, which is what I am now doing. But this is not how it worked in FSX. Robert Link to comment Share on other sites More sharing options...
Pete Dowson Posted December 16, 2013 Report Share Posted December 16, 2013 With the A2A C172 it turns out I was able to access all of the aircraft specific ini commands (usually there are just 4 lines of commands) but none of the ini commands contained in the default button ini section. However, if I copied the default button ini commands into the aircraft specific button ini section for the A2A C172, then I had access to the commands. ... So what I have is the default Axis and Calibration settings being recognized but not the default Button settings. There must be something wrong with the INI file -- there can't be any difference for P3D because all that stuff is pure FSUIPC code, nothing to do with P3D. I need to see your INI file and hopefully the log which proves what you are saying -- ie with the Button and Key logging enabled. You can paste the contents of the files here, but please enclise them using the <> button above the editing window. Pete Link to comment Share on other sites More sharing options...
macwino Posted December 17, 2013 Author Report Share Posted December 17, 2013 Pete, here are the files you asked for. I used the default Carenado A36 for these tests since I no longer have the A2A C172 installed for it didn't work very well with P3D v2. The problematic behavior is the same with either plane. Here's my fsuipc.ini file with a Default Button section and an A36 Button section with just a single custom key command since there are no other popups I'm interested in. Only the custom command works. None of the commands in the Default Button section work. [General] UpdatedByVersion=4923 History=9HZK9DQE9YMKZ3FJ85ZKK InitDelayDevicesToo=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 //BrakeReleaseThreshold=0 // changed to 0 for A2A C172 but then back to 75 when 0 no longer worked SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=No EnableMouseLook=No //AxesWrongRange=No // changed to yes on 3/15/13 for Citation X AxesWrongRange=Yes TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=No OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No LogButtonsKeys=Yes FSVersionUsed="Lockheed MartinÆ Prepar3DÆ v2",2.0.9448.0 SimConnectUsed=2.0.0.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Rudder Pedals 0.GUID={66D3E1A0-8C5B-11E1-8001-444553540000} P=Saitek Pro Flight Rudder Pedals P.GUID={66D3E1A0-8C5B-11E1-8001-444553540000} 1=Saitek Pro Flight Yoke 1.GUID={66D3E1A0-8C5B-11E1-8002-444553540000} Y=Saitek Pro Flight Yoke Y.GUID={66D3E1A0-8C5B-11E1-8002-444553540000} 2=Saitek Pro Flight Throttle Quadrant 2.GUID={66D408B0-8C5B-11E1-8003-444553540000} Q=Saitek Pro Flight Throttle Quadrant Q.GUID={66D408B0-8C5B-11E1-8003-444553540000} 3=MotioninJoy Virtual Game Controller 3.GUID={B602D7B0-4FA3-11E3-8003-444553540000} G=MotioninJoy Virtual Game Controller G.GUID={B602D7B0-4FA3-11E3-8003-444553540000} 4=Pro Flight Cessna Trim Wheel 4.GUID={26F71C20-9014-11E1-8001-444553540000} T=Pro Flight Cessna Trim Wheel T.GUID={26F71C20-9014-11E1-8001-444553540000} [Buttons] ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [Sounds] Path=C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Sound\ Device1=Primary Sound Driver Device2=Speakers (Sennheiser 3D G4ME1) Device3=SPDIF-Out (Sound Blaster X-Fi Surround 5.1 Pro) Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio) Device5=Speaker (Sound Blaster X-Fi Surround 5.1 Pro) Device6=Realtek Digital Output (Realtek High Definition Audio) [Buttons] // Default - use for all aircraft 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) [Axes] // Default for single engine aircraft or multi-engine controlled by 1 axis 0=PX,256,D,7,0,0,0 1=PY,256,D,8,0,0,0 2=PR,256,D,3,0,0,0 3=YX,256,D,1,0,0,0 4=YY,256,D,2,0,0,0 5=YZ,256,D,4,0,0,0 6=YU,256,D,5,0,0,0 7=YV,256,D,6,0,0,0 //8=YP,0,F,66416,0,0,0 8=QX,256,D,23,0,0,0 9=QY,256,D,21,0,0,0 10=QZ,256 11=QZ,U,6400,16383,66079,0 12=QZ,D,-16253,-7672,66080,0 13=TX,256,D,21,0,0,0 RangeRepeatRate=10 [JoystickCalibration] // Default for single engine aircraft or multi-engine controlled by 1 axis ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,-512,512,16380 Elevator=-16384,-512,512,16383 Rudder=-15213,-512,512,16256 Throttle=-16380,16380 PropPitch=-13133,16256 Mixture=-14563,16383 Flaps=-16383,16383/16 ElevatorTrim=-16380,-512,512,16256 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No SlopeAileron=5 SlopeElevator=5 SlopeRudder=5 [Buttons.Carenado A36] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 ; Carenado GPS (Shift+1) //14=CP(+Y,8)(-Y,0)Y,6,K50,9 ; (Shift+2) //15=CP(+Y,8)(+Y,0)Y,6,K51,9 ; (Shift+3) //16=CP(+Y,8)(+Y,0)Y,7,K52,9 ; (Shift+4) [Buttons.C337 Skymaster] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 ; Carenado GPS (Shift+1) //14=CP(+Y,8)(-Y,0)Y,6,K50,9 ; (Shift+2) //15=CP(+Y,8)(+Y,0)Y,6,K51,9 ; (Shift+3) //16=CP(+Y,8)(+Y,0)Y,7,K52,9 ; (Shift+4) 17=CP(+Y,8)Y,15,C65758,0 ; Flaps Down 18=CP(+Y,8)Y,14,C65759,0 ; Flaps Up 19=CP(+Y,8)Y,17,C66080,0 ; Gear Down 20=CP(+Y,8)Y,16,C66079,0 ; Gear Up [Axes.C337 Skymaster] RangeRepeatRate=10 0=PX,256,D,7,0,0,0 1=PY,256,D,8,0,0,0 2=PR,256,D,3,0,0,0 3=YX,256,D,1,0,0,0 4=YY,256,D,2,0,0,0 5=YZ,256,D,9,0,0,0 6=YU,256,D,10,0,0,0 7=YV,256,D,17,0,0,0 //8=YP,0,F,66416,0,0,0 8=QX,256,D,18,0,0,0 9=QY,256,D,13,0,0,0 10=QZ,256,D,14,0,0,0 [JoystickCalibration.C337 Skymaster] SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,-512,512,16380/8 Elevator=-16384,-512,512,16383/8 Rudder=-15213,-512,512,16256/8 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-14190,-14190,-14190,16383/40 Throttle2=-14190,-14190,-14190,16383/40 PropPitch1=-16384,-14563,-11182,16383 PropPitch2=-16384,-14823,-11182,16383 Mixture1=-16384,-14693,-10142,16383 Mixture2=-16384,-15473,-12483,16256 ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SlopeAileron=5 SlopeElevator=5 SlopeRudder=5 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No [Buttons.Aerosoft DHC-6] // Aerosoft Twin Otter X Extended //13=CP(+Y,8)(-Y,0)Y,7,K53,9 ; RXP GNS WAAS(Shift+5) 14=CP(+Y,8)(-Y,0)Y,6,K50,9 ; Checklist (Shift+2) 15=CP(+Y,8)(+Y,0)Y,6,K51,9 ; Panel Selector (Shift+3) 16=CP(+Y,8)(+Y,0)Y,7,K52,9 ; Stock GPS (Shift+4) 17=CP(+Y,8)Y,15,C65758,0 ; Flaps Down 18=CP(+Y,8)Y,14,C65759,0 ; Flaps Up [Axes.Aerosoft DHC-6] // Aerosoft Twin Otter X Extended RangeRepeatRate=10 0=PX,256,D,7,0,0,0 1=PY,256,D,8,0,0,0 2=PR,256,D,3,0,0,0 3=YX,256,D,1,0,0,0 4=YY,256,D,2,0,0,0 5=YZ,256,D,9,0,0,0 6=YU,256,D,10,0,0,0 7=YV,256,D,17,0,0,0 //8=YP,0,F,66416,0,0,0 8=QX,256,D,18,0,0,0 9=QY,256,D,13,0,0,0 10=QZ,256,D,14,0,0,0 [JoystickCalibration.Aerosoft DHC-6] // Aerosoft Twin Otter X Extended ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,512,16380 Elevator=-16384,0,512,16383 Rudder=-16319,-512,512,16383 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-16384,-2000,2000,16383/24 Throttle2=-16384,-2000,2000,16383/24 Mixture1=-16384,-16384,-16384,16383/56 Mixture2=-16384,-16384,-16384,16383/56 PropPitch1=-16384,-16384,-16384,16383/56 PropPitch2=-16384,-16384,-16384,16383/56 SlopeAileron=5 SlopeElevator=5 SlopeRudder=5 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No [Buttons.Lockheed L049] // P3D Default Connie 13=CP(+Y,8)(-Y,0)Y,7,K50,9 ; Radio Panel (Shift+2) 14=CP(+Y,8)(-Y,0)Y,6,K51,9 ; Auto Pilot (Shift+3) 15=RY,20,C65602,0 ; Throttle Decrease - Reversers On 16=UY,20,C65604,0 ; Throttle Cut - Reversers Off and Idle 17=CP(+Y,8)Q,0,C66243,0 ; Cowl Flaps Open 18=CP(+Y,8)Q,1,C66244,0 ; Cowl Flaps Close [Buttons.Lockheed C69] // P3D Default Connie 13=CP(+Y,8)(-Y,0)Y,7,K50,9 ; Radio Panel (Shift+2) 14=CP(+Y,8)(-Y,0)Y,6,K51,9 ; Auto Pilot (Shift+3) 15=RY,20,C65602,0 ; Throttle Decrease - Reversers On 16=UY,20,C65604,0 ; Throttle Cut - Reversers Off and Idle 17=CP(+Y,8)Q,0,C66243,0 ; Cowl Flaps Open 18=CP(+Y,8)Q,1,C66244,0 ; Cowl Flaps Close [ClientNames] 1=FLIGHTSIM [Monitor] Monitor0=0,024C,4,0 Now, here's the log file for a brief flight using this ini so you can see what's happening: ********* FSUIPC4, Version 4.923 by Pete Dowson ********* Running inside Prepar3D v2 on Windows 7 Module base=547E0000 User Name="Robert Chartoff" User Addr="macwino@mac.com" FSUIPC4 Key is provided WideFS7 Key is provided 983 System time = 16/12/2013 20:04:22 998 FLT UNC path = "\\FLIGHTSIM2\Users\Robert\Documents\Prepar3D v2 Files\" 998 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Modules\SimConnectP3D2.dll 998 Found it: trying to connect 998 FS UNC path = "\\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\" 1263 LogOptions=40000000 00000001 1263 SIM1 Frictions access gained 1279 Wind smoothing fix is fully installed 1279 SimConnect_Open succeeded: waiting to check version okay 1279 Trying to use SimConnect Prepar3D 1279 Running in "Lockheed MartinÆ Prepar3DÆ v2", Version: 2.0.9448.0 (SimConnect: 2.0.0.0) 1279 Initialising SimConnect data requests now 1279 FSUIPC Menu entry added 1295 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\FLIGHTS\OTHER\Prepar3D.FXML 1295 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.AIR 29437 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.AIR 58890 System time = 16/12/2013 20:05:20, Simulator time = 15:04:45 (23:04Z) 58906 Aircraft="Carenado A36 Bonanza 60th Anniversary" 61215 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 61215 .. Key not programmed -- passed on to FS 61355 KEYUP: VK=80, Waiting=0 62260 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 62260 .. Key not programmed -- passed on to FS 62759 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62759 .. Key not programmed -- passed on to FS 62790 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62790 .. Key not programmed -- passed on to FS 62821 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62821 .. Key not programmed -- passed on to FS 62853 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62853 .. Key not programmed -- passed on to FS 62899 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62899 .. Key not programmed -- passed on to FS 62931 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62931 .. Key not programmed -- passed on to FS 62962 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62962 .. Key not programmed -- passed on to FS 62993 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 62993 .. Key not programmed -- passed on to FS 63024 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63024 .. Key not programmed -- passed on to FS 63055 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63055 .. Key not programmed -- passed on to FS 63102 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63102 .. Key not programmed -- passed on to FS 63133 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63133 .. Key not programmed -- passed on to FS 63165 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63165 .. Key not programmed -- passed on to FS 63196 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63196 .. Key not programmed -- passed on to FS 63227 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63227 .. Key not programmed -- passed on to FS 63258 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63258 .. Key not programmed -- passed on to FS 63289 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63289 .. Key not programmed -- passed on to FS 63336 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 63336 .. Key not programmed -- passed on to FS 63367 KEYDOWN: VK=190, Waiting=0, Repeat=N, Shifts=2 63367 .. Key not programmed -- passed on to FS 63492 KEYUP: VK=190, Waiting=0 63695 KEYUP: VK=17, Waiting=0 63804 Starting everything now ... 67314 Advanced Weather Interface Enabled 82509 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 82509 .. Key not programmed -- passed on to FS 82618 KEYUP: VK=80, Waiting=0 84271 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 84271 .. Key not programmed -- passed on to FS 84396 KEYUP: VK=80, Waiting=0 90246 Weather Mode now = Custom 90434 Weather Mode now = Theme 90434 Weather Mode now = Custom 92976 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 92976 .. Key not programmed -- passed on to FS 93070 KEYUP: VK=80, Waiting=0 97001 KEYDOWN: VK=76, Waiting=0, Repeat=N, Shifts=0 97001 .. Key not programmed -- passed on to FS 97173 KEYUP: VK=76, Waiting=0 135783 KEYDOWN: VK=190, Waiting=0, Repeat=N, Shifts=0 135783 .. Key not programmed -- passed on to FS 135877 KEYUP: VK=190, Waiting=0 171211 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 171211 .. Key not programmed -- passed on to FS 171398 KEYUP: VK=83, Waiting=0 185875 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 185875 .. Key not programmed -- passed on to FS 186187 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=1 186187 .. Key not programmed -- passed on to FS 186343 KEYUP: VK=83, Waiting=0 186390 KEYUP: VK=16, Waiting=0 189713 KEYDOWN: VK=27, Waiting=0, Repeat=N, Shifts=0 189713 .. Key not programmed -- passed on to FS 189713 Sim stopped: average frame rate for last 131 secs = 29.4 fps 200352 KEYDOWN: VK=91, Waiting=0, Repeat=N, Shifts=32 200352 .. Key not programmed -- passed on to FS 200617 KEYDOWN: VK=13, Waiting=0, Repeat=N, Shifts=32 200617 .. Key not programmed -- passed on to FS 200711 KEYUP: VK=13, Waiting=0 200789 KEYUP: VK=91, Waiting=0 201381 KEYDOWN: VK=13, Waiting=0, Repeat=N, Shifts=4 201381 .. Key not programmed -- passed on to FS 201506 KEYUP: VK=13, Waiting=0 201615 KEYUP: VK=18, Waiting=0 224423 System time = 16/12/2013 20:08:05, Simulator time = 15:06:42 (23:06Z) 224423 *** FSUIPC log file being closed Average frame rate for running time of 140 secs = 29.4 fps Memory managed: 58 Allocs, 58 Freed ********* FSUIPC Log file closed *********** FWIW, I will now attach the fsuipc.ini file where I include the default button commands in the aircraft specific button section, which gives me access to the commands. The log file when using this ini is also attached afterwards. [General] UpdatedByVersion=4923 History=9HZK9DQE9YMKZ3FJ85ZKK InitDelayDevicesToo=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 //BrakeReleaseThreshold=0 // changed to 0 for A2A C172 but then back to 75 when 0 no longer worked SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=No EnableMouseLook=No //AxesWrongRange=No // changed to yes on 3/15/13 for Citation X AxesWrongRange=Yes TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=No OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No LogButtonsKeys=Yes FSVersionUsed="Lockheed MartinÆ Prepar3DÆ v2",2.0.9448.0 SimConnectUsed=2.0.0.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Rudder Pedals 0.GUID={66D3E1A0-8C5B-11E1-8001-444553540000} P=Saitek Pro Flight Rudder Pedals P.GUID={66D3E1A0-8C5B-11E1-8001-444553540000} 1=Saitek Pro Flight Yoke 1.GUID={66D3E1A0-8C5B-11E1-8002-444553540000} Y=Saitek Pro Flight Yoke Y.GUID={66D3E1A0-8C5B-11E1-8002-444553540000} 2=Saitek Pro Flight Throttle Quadrant 2.GUID={66D408B0-8C5B-11E1-8003-444553540000} Q=Saitek Pro Flight Throttle Quadrant Q.GUID={66D408B0-8C5B-11E1-8003-444553540000} 3=MotioninJoy Virtual Game Controller 3.GUID={B602D7B0-4FA3-11E3-8003-444553540000} G=MotioninJoy Virtual Game Controller G.GUID={B602D7B0-4FA3-11E3-8003-444553540000} 4=Pro Flight Cessna Trim Wheel 4.GUID={26F71C20-9014-11E1-8001-444553540000} T=Pro Flight Cessna Trim Wheel T.GUID={26F71C20-9014-11E1-8001-444553540000} [Buttons] ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [Sounds] Path=C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Sound\ Device1=Primary Sound Driver Device2=Speakers (Sennheiser 3D G4ME1) Device3=SPDIF-Out (Sound Blaster X-Fi Surround 5.1 Pro) Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio) Device5=Speaker (Sound Blaster X-Fi Surround 5.1 Pro) Device6=Realtek Digital Output (Realtek High Definition Audio) [Buttons] // Default - use for all aircraft 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) [Axes] // Default for single engine aircraft or multi-engine controlled by 1 axis 0=PX,256,D,7,0,0,0 1=PY,256,D,8,0,0,0 2=PR,256,D,3,0,0,0 3=YX,256,D,1,0,0,0 4=YY,256,D,2,0,0,0 5=YZ,256,D,4,0,0,0 6=YU,256,D,5,0,0,0 7=YV,256,D,6,0,0,0 //8=YP,0,F,66416,0,0,0 8=QX,256,D,23,0,0,0 9=QY,256,D,21,0,0,0 10=QZ,256 11=QZ,U,6400,16383,66079,0 12=QZ,D,-16253,-7672,66080,0 13=TX,256,D,21,0,0,0 RangeRepeatRate=10 [JoystickCalibration] // Default for single engine aircraft or multi-engine controlled by 1 axis ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,-512,512,16380 Elevator=-16384,-512,512,16383 Rudder=-15213,-512,512,16256 Throttle=-16380,16380 PropPitch=-13133,16256 Mixture=-14563,16383 Flaps=-16383,16383/16 ElevatorTrim=-16380,-512,512,16256 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No SlopeAileron=5 SlopeElevator=5 SlopeRudder=5 [Buttons.Carenado A36] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) 13=CP(+Y,8)(-Y,0)Y,7,K49,9 ; Carenado GPS (Shift+1) //14=CP(+Y,8)(-Y,0)Y,6,K50,9 ; (Shift+2) //15=CP(+Y,8)(+Y,0)Y,6,K51,9 ; (Shift+3) //16=CP(+Y,8)(+Y,0)Y,7,K52,9 ; (Shift+4) [Buttons.C337 Skymaster] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) 13=CP(+Y,8)(-Y,0)Y,7,K49,9 ; Carenado GPS (Shift+1) //14=CP(+Y,8)(-Y,0)Y,6,K50,9 ; (Shift+2) //15=CP(+Y,8)(+Y,0)Y,6,K51,9 ; (Shift+3) //16=CP(+Y,8)(+Y,0)Y,7,K52,9 ; (Shift+4) 17=CP(+Y,8)Y,15,C65758,0 ; Flaps Down 18=CP(+Y,8)Y,14,C65759,0 ; Flaps Up 19=CP(+Y,8)Y,17,C66080,0 ; Gear Down 20=CP(+Y,8)Y,16,C66079,0 ; Gear Up [Axes.C337 Skymaster] RangeRepeatRate=10 0=PX,256,D,7,0,0,0 1=PY,256,D,8,0,0,0 2=PR,256,D,3,0,0,0 3=YX,256,D,1,0,0,0 4=YY,256,D,2,0,0,0 5=YZ,256,D,9,0,0,0 6=YU,256,D,10,0,0,0 7=YV,256,D,17,0,0,0 //8=YP,0,F,66416,0,0,0 8=QX,256,D,18,0,0,0 9=QY,256,D,13,0,0,0 10=QZ,256,D,14,0,0,0 [JoystickCalibration.C337 Skymaster] SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,-512,512,16380/8 Elevator=-16384,-512,512,16383/8 Rudder=-15213,-512,512,16256/8 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-14190,-14190,-14190,16383/40 Throttle2=-14190,-14190,-14190,16383/40 PropPitch1=-16384,-14563,-11182,16383 PropPitch2=-16384,-14823,-11182,16383 Mixture1=-16384,-14693,-10142,16383 Mixture2=-16384,-15473,-12483,16256 ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SlopeAileron=5 SlopeElevator=5 SlopeRudder=5 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No [Buttons.Aerosoft DHC-6] // Aerosoft Twin Otter X Extended 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) //13=CP(+Y,8)(-Y,0)Y,7,K53,9 ; RXP GNS WAAS(Shift+5) 14=CP(+Y,8)(-Y,0)Y,6,K50,9 ; Checklist (Shift+2) 15=CP(+Y,8)(+Y,0)Y,6,K51,9 ; Panel Selector (Shift+3) 16=CP(+Y,8)(+Y,0)Y,7,K52,9 ; Stock GPS (Shift+4) 17=CP(+Y,8)Y,15,C65758,0 ; Flaps Down 18=CP(+Y,8)Y,14,C65759,0 ; Flaps Up [Axes.Aerosoft DHC-6] // Aerosoft Twin Otter X Extended RangeRepeatRate=10 0=PX,256,D,7,0,0,0 1=PY,256,D,8,0,0,0 2=PR,256,D,3,0,0,0 3=YX,256,D,1,0,0,0 4=YY,256,D,2,0,0,0 5=YZ,256,D,9,0,0,0 6=YU,256,D,10,0,0,0 7=YV,256,D,17,0,0,0 //8=YP,0,F,66416,0,0,0 8=QX,256,D,18,0,0,0 9=QY,256,D,13,0,0,0 10=QZ,256,D,14,0,0,0 [JoystickCalibration.Aerosoft DHC-6] // Aerosoft Twin Otter X Extended ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,512,16380 Elevator=-16384,0,512,16383 Rudder=-16319,-512,512,16383 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-16384,-2000,2000,16383/24 Throttle2=-16384,-2000,2000,16383/24 Mixture1=-16384,-16384,-16384,16383/56 Mixture2=-16384,-16384,-16384,16383/56 PropPitch1=-16384,-16384,-16384,16383/56 PropPitch2=-16384,-16384,-16384,16383/56 SlopeAileron=5 SlopeElevator=5 SlopeRudder=5 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No [Buttons.Lockheed L049] // P3D Default Connie 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) 13=CP(+Y,8)(-Y,0)Y,7,K50,9 ; Radio Panel (Shift+2) 14=CP(+Y,8)(-Y,0)Y,6,K51,9 ; Auto Pilot (Shift+3) 15=RY,20,C65602,0 ; Throttle Decrease - Reversers On 16=UY,20,C65604,0 ; Throttle Cut - Reversers Off and Idle 17=CP(+Y,8)Q,0,C66243,0 ; Cowl Flaps Open 18=CP(+Y,8)Q,1,C66244,0 ; Cowl Flaps Close [Buttons.Lockheed C69] // P3D Default Connie 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) 13=CP(+Y,8)(-Y,0)Y,7,K50,9 ; Radio Panel (Shift+2) 14=CP(+Y,8)(-Y,0)Y,6,K51,9 ; Auto Pilot (Shift+3) 15=RY,20,C65602,0 ; Throttle Decrease - Reversers On 16=UY,20,C65604,0 ; Throttle Cut - Reversers Off and Idle 17=CP(+Y,8)Q,0,C66243,0 ; Cowl Flaps Open 18=CP(+Y,8)Q,1,C66244,0 ; Cowl Flaps Close [ClientNames] 1=FLIGHTSIM [Monitor] Monitor0=0,024C,4,0 And here's the log file for this ini: ********* FSUIPC4, Version 4.923 by Pete Dowson ********* Running inside Prepar3D v2 on Windows 7 Module base=54770000 User Name="Robert Chartoff" User Addr="macwino@mac.com" FSUIPC4 Key is provided WideFS7 Key is provided 765 System time = 16/12/2013 19:55:04 765 FLT UNC path = "\\FLIGHTSIM2\Users\Robert\Documents\Prepar3D v2 Files\" 765 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Modules\SimConnectP3D2.dll 765 Found it: trying to connect 780 FS UNC path = "\\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\" 1046 LogOptions=40000000 00000001 1046 SIM1 Frictions access gained 1046 Wind smoothing fix is fully installed 1046 SimConnect_Open succeeded: waiting to check version okay 1046 Trying to use SimConnect Prepar3D 1046 Running in "Lockheed MartinÆ Prepar3DÆ v2", Version: 2.0.9448.0 (SimConnect: 2.0.0.0) 1046 Initialising SimConnect data requests now 1046 FSUIPC Menu entry added 1077 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\FLIGHTS\OTHER\Prepar3D.FXML 1077 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.AIR 29703 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.AIR 233347 System time = 16/12/2013 19:58:56, Simulator time = 15:55:27 (23:55Z) 233347 Aircraft="Carenado A36 Bonanza 60th Anniversary" 234267 Starting everything now ... 234953 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 234953 .. Key not programmed -- passed on to FS 235359 KEYUP: VK=80, Waiting=0 237512 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 237512 .. Key not programmed -- passed on to FS 237777 Advanced Weather Interface Enabled 237871 KEYDOWN: VK=188, Waiting=0, Repeat=N, Shifts=2 237871 .. Key not programmed -- passed on to FS 237980 KEYUP: VK=188, Waiting=0 238183 KEYUP: VK=17, Waiting=0 240928 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 240928 .. Key not programmed -- passed on to FS 241209 KEYDOWN: VK=188, Waiting=0, Repeat=N, Shifts=2 241209 .. Key not programmed -- passed on to FS 241303 KEYUP: VK=188, Waiting=0 241365 KEYUP: VK=17, Waiting=0 246841 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 246841 .. Key not programmed -- passed on to FS 247246 KEYDOWN: VK=190, Waiting=0, Repeat=N, Shifts=2 247246 .. Key not programmed -- passed on to FS 247356 KEYUP: VK=190, Waiting=0 247683 KEYUP: VK=17, Waiting=0 301067 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 301067 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 301067 .... Condition (+Y,8) = TRUE 301067 .... Condition (-Y,0) = TRUE 301067 SendKeyToFS(0000007E=[F15], KEYDOWN) ctr=0 301067 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 301067 .... Condition (+Y,8) = TRUE 301067 .... Condition (+Y,0) = FALSE 301067 Sending WM_KEYDOWN, Key=126 (Scan code 102), Ctr=1 301176 SendKeyToFS(0000007E=[F15], KEYUP) ctr=0 301176 Sending WM_KEYUP, Key=126 (Scan code 102), Ctr=1 301269 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 301269 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 301269 .... Condition (+Y,8) = TRUE 301269 .... Condition (-Y,0) = TRUE 301269 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 301269 .... Condition (+Y,8) = TRUE 301269 .... Condition (+Y,0) = FALSE 303173 Weather Mode now = Custom 303360 Weather Mode now = Theme 303360 Weather Mode now = Custom 307494 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 307494 .. Key not programmed -- passed on to FS 307634 KEYUP: VK=80, Waiting=0 309350 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 309350 .. Key not programmed -- passed on to FS 309522 KEYUP: VK=80, Waiting=0 316214 KEYDOWN: VK=76, Waiting=0, Repeat=N, Shifts=0 316214 .. Key not programmed -- passed on to FS 316402 KEYUP: VK=76, Waiting=0 325668 KEYDOWN: VK=66, Waiting=0, Repeat=N, Shifts=0 325668 .. Key not programmed -- passed on to FS 325933 KEYUP: VK=66, Waiting=0 332688 Button changed: bRef=0, Joy=1 (Y), Btn=7, Pressed 332688 [Buttons.Carenado A36 Bonanza 60th Anniversary] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 332688 .... Condition (+Y,8) = TRUE 332688 .... Condition (-Y,0) = TRUE 332688 SendKeyToFS(00040031=[shft+1], KEYDOWN) ctr=0 332688 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 332704 Sending WM_KEYDOWN, Key=49 (Scan code 2), Ctr=1 332719 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 332719 .. Key not programmed -- passed on to FS 332719 KEYDOWN: VK=49, Waiting=0, Repeat=N, Shifts=1 332719 .. Key not programmed -- passed on to FS 332813 SendKeyToFS(00040031=[shft+1], KEYUP) ctr=0 332813 Sending WM_KEYUP, Key=49 (Scan code 2), Ctr=2 332828 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 332828 KEYUP: VK=49, Waiting=0 332828 KEYUP: VK=16, Waiting=0 332969 Button changed: bRef=0, Joy=1 (Y), Btn=7, Released 332969 [Buttons.Carenado A36 Bonanza 60th Anniversary] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 332969 .... Condition (+Y,8) = TRUE 332969 .... Condition (-Y,0) = TRUE 337571 Button changed: bRef=0, Joy=1 (Y), Btn=7, Pressed 337571 [Buttons.Carenado A36 Bonanza 60th Anniversary] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 337571 .... Condition (+Y,8) = TRUE 337571 .... Condition (-Y,0) = TRUE 337571 SendKeyToFS(00040031=[shft+1], KEYDOWN) ctr=0 337571 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 337587 Sending WM_KEYDOWN, Key=49 (Scan code 2), Ctr=1 337602 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 337602 .. Key not programmed -- passed on to FS 337602 KEYDOWN: VK=49, Waiting=0, Repeat=N, Shifts=1 337602 .. Key not programmed -- passed on to FS 337696 SendKeyToFS(00040031=[shft+1], KEYUP) ctr=0 337696 Sending WM_KEYUP, Key=49 (Scan code 2), Ctr=2 337696 KEYUP: VK=49, Waiting=0 337711 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 337743 KEYUP: VK=16, Waiting=0 337805 Button changed: bRef=0, Joy=1 (Y), Btn=7, Released 337805 [Buttons.Carenado A36 Bonanza 60th Anniversary] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 337805 .... Condition (+Y,8) = TRUE 337805 .... Condition (-Y,0) = TRUE 341237 Button changed: bRef=0, Joy=1 (Y), Btn=7, Pressed 341237 [Buttons.Carenado A36 Bonanza 60th Anniversary] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 341237 .... Condition (+Y,8) = TRUE 341237 .... Condition (-Y,0) = FALSE 341471 Button changed: bRef=0, Joy=1 (Y), Btn=7, Released 341471 [Buttons.Carenado A36 Bonanza 60th Anniversary] 13=CP(+Y,8)(-Y,0)Y,7,K49,9 341471 .... Condition (+Y,8) = TRUE 341471 .... Condition (-Y,0) = FALSE 345402 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 345402 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 345402 .... Condition (+Y,8) = TRUE 345402 .... Condition (-Y,0) = FALSE 345402 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 345402 .... Condition (+Y,8) = TRUE 345402 .... Condition (+Y,0) = TRUE 345402 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 345402 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 345527 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 345543 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 345574 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 345574 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 345574 .... Condition (+Y,8) = TRUE 345574 .... Condition (-Y,0) = FALSE 345574 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 345574 .... Condition (+Y,8) = TRUE 345574 .... Condition (+Y,0) = TRUE 346681 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 346681 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 346681 .... Condition (+Y,8) = TRUE 346681 .... Condition (-Y,0) = FALSE 346681 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 346681 .... Condition (+Y,8) = TRUE 346681 .... Condition (+Y,0) = TRUE 346681 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 346681 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 346806 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 346806 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 346806 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 346806 .... Condition (+Y,8) = TRUE 346806 .... Condition (-Y,0) = FALSE 346806 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 346806 .... Condition (+Y,8) = TRUE 346806 .... Condition (+Y,0) = TRUE 346806 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 356447 KEYDOWN: VK=190, Waiting=0, Repeat=N, Shifts=0 356447 .. Key not programmed -- passed on to FS 356681 KEYUP: VK=190, Waiting=0 366852 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 366852 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 366852 .... Condition (+Y,8) = TRUE 366852 .... Condition (-Y,0) = TRUE 366852 SendKeyToFS(0000007E=[F15], KEYDOWN) ctr=0 366852 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 366852 .... Condition (+Y,8) = TRUE 366852 .... Condition (+Y,0) = FALSE 366852 Sending WM_KEYDOWN, Key=126 (Scan code 102), Ctr=1 366962 SendKeyToFS(0000007E=[F15], KEYUP) ctr=0 366962 Sending WM_KEYUP, Key=126 (Scan code 102), Ctr=1 367055 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 367055 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 367055 .... Condition (+Y,8) = TRUE 367055 .... Condition (-Y,0) = TRUE 367055 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 367055 .... Condition (+Y,8) = TRUE 367055 .... Condition (+Y,0) = FALSE 416897 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 416897 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 416897 .... Condition (+Y,8) = TRUE 416897 .... Condition (-Y,0) = FALSE 416897 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 416897 .... Condition (+Y,8) = TRUE 416897 .... Condition (+Y,0) = TRUE 416897 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 416897 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 417022 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 417022 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 417100 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 417100 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 417100 .... Condition (+Y,8) = TRUE 417100 .... Condition (-Y,0) = FALSE 417100 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 417100 .... Condition (+Y,8) = TRUE 417100 .... Condition (+Y,0) = TRUE 417568 Button changed: bRef=0, Joy=1 (Y), Btn=1, Pressed 417568 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 417568 .... Condition (+Y,8) = TRUE 417568 .... Condition (-Y,0) = TRUE 417568 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 417568 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 417568 .... Condition (+Y,8) = TRUE 417568 .... Condition (+Y,0) = FALSE 417568 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 417599 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 417599 .. Key not programmed -- passed on to FS 417677 SendKeyToFS(00000053=[S], KEYUP) ctr=0 417677 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 417709 KEYUP: VK=83, Waiting=0 417833 Button changed: bRef=0, Joy=1 (Y), Btn=1, Released 417833 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 417833 .... Condition (+Y,8) = TRUE 417833 .... Condition (-Y,0) = TRUE 417833 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 417833 .... Condition (+Y,8) = TRUE 417833 .... Condition (+Y,0) = FALSE 432966 Button changed: bRef=0, Joy=1 (Y), Btn=1, Pressed 432966 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 432966 .... Condition (+Y,8) = TRUE 432966 .... Condition (-Y,0) = FALSE 432966 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 432966 .... Condition (+Y,8) = TRUE 432966 .... Condition (+Y,0) = TRUE 432966 SendKeyToFS(00040053=[shft+S], KEYDOWN) ctr=0 432966 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 432981 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 432997 KEYDOWN: VK=16, Waiting=0, Repeat=N, Shifts=1 432997 .. Key not programmed -- passed on to FS 432997 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=1 432997 .. Key not programmed -- passed on to FS 433075 SendKeyToFS(00040053=[shft+S], KEYUP) ctr=0 433075 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=2 433090 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 433106 Button changed: bRef=0, Joy=1 (Y), Btn=1, Released 433106 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 433106 .... Condition (+Y,8) = TRUE 433106 .... Condition (-Y,0) = FALSE 433106 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 433106 .... Condition (+Y,8) = TRUE 433106 .... Condition (+Y,0) = TRUE 433106 KEYUP: VK=83, Waiting=0 433106 KEYUP: VK=16, Waiting=0 434385 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 434385 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 434385 .... Condition (+Y,8) = TRUE 434385 .... Condition (-Y,0) = FALSE 434385 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 434385 .... Condition (+Y,8) = TRUE 434385 .... Condition (+Y,0) = TRUE 434385 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 434385 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 434494 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 434494 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 434526 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 434526 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 434526 .... Condition (+Y,8) = TRUE 434526 .... Condition (-Y,0) = FALSE 434526 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 434526 .... Condition (+Y,8) = TRUE 434526 .... Condition (+Y,0) = TRUE 447442 KEYDOWN: VK=91, Waiting=0, Repeat=N, Shifts=32 447442 .. Key not programmed -- passed on to FS 447614 KEYDOWN: VK=13, Waiting=0, Repeat=N, Shifts=32 447614 .. Key not programmed -- passed on to FS 447723 KEYUP: VK=13, Waiting=0 447723 KEYUP: VK=91, Waiting=0 448971 KEYDOWN: VK=13, Waiting=0, Repeat=N, Shifts=4 448971 .. Key not programmed -- passed on to FS 449096 KEYUP: VK=13, Waiting=0 449205 KEYUP: VK=18, Waiting=0 454197 KEYDOWN: VK=27, Waiting=0, Repeat=N, Shifts=0 454197 .. Key not programmed -- passed on to FS 454197 Sim stopped: average frame rate for last 221 secs = 29.4 fps 471872 System time = 16/12/2013 20:02:55, Simulator time = 15:58:16 (23:58Z) 471872 *** FSUIPC log file being closed Average frame rate for running time of 221 secs = 29.4 fps Memory managed: 88 Allocs, 88 Freed ********* FSUIPC Log file closed *********** I hope I've done this right and it will enable you to see what I'm doing wrong. Thanks, Robert Link to comment Share on other sites More sharing options...
macwino Posted December 17, 2013 Author Report Share Posted December 17, 2013 Pete, the second set of attached files above may contain the wrong log file. The log file I attached may have been for the first ini with only the custom button commands. I will attach the proper log file in a few minutes after I setup a flight using the second ini, which is the one with the default button commands included in the aircraft specific button section. Sorry for the confusion. Robert Link to comment Share on other sites More sharing options...
macwino Posted December 17, 2013 Author Report Share Posted December 17, 2013 Pete, here's the log file for the ini which has the default button commands included in the aircraft specific button section. I may not have messed up my earlier post but here it is anyway just in case I did. ********* FSUIPC4, Version 4.923 by Pete Dowson ********* Running inside Prepar3D v2 on Windows 7 Module base=565C0000 User Name="Robert Chartoff" User Addr="macwino@mac.com" FSUIPC4 Key is provided WideFS7 Key is provided 483 System time = 16/12/2013 20:35:04 499 FLT UNC path = "\\FLIGHTSIM2\Users\Robert\Documents\Prepar3D v2 Files\" 499 Trying C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Modules\SimConnectP3D2.dll 499 Found it: trying to connect 515 FS UNC path = "\\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\" 795 LogOptions=40000000 00000001 795 SIM1 Frictions access gained 795 Wind smoothing fix is fully installed 795 SimConnect_Open succeeded: waiting to check version okay 795 Trying to use SimConnect Prepar3D 8751 Running in "Lockheed MartinÆ Prepar3DÆ v2", Version: 2.0.9448.0 (SimConnect: 2.0.0.0) 8751 Initialising SimConnect data requests now 8751 FSUIPC Menu entry added 8767 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\FLIGHTS\OTHER\Prepar3D.FXML 8767 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.AIR 36535 \\FLIGHTSIM2\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\Carenado A36 BONANZA P3D\A36.AIR 66331 System time = 16/12/2013 20:36:10, Simulator time = 15:35:36 (23:35Z) 66331 Aircraft="Carenado A36 Bonanza 60th Anniversary" 67345 Starting everything now ... 68063 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 68063 .. Key not programmed -- passed on to FS 68281 KEYUP: VK=80, Waiting=0 69249 KEYDOWN: VK=17, Waiting=0, Repeat=N, Shifts=2 69249 .. Key not programmed -- passed on to FS 69732 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 69732 .. Key not programmed -- passed on to FS 69763 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 69763 .. Key not programmed -- passed on to FS 69810 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 69810 .. Key not programmed -- passed on to FS 69841 KEYDOWN: VK=17, Waiting=0, Repeat=Y, Shifts=2 69841 .. Key not programmed -- passed on to FS 69888 KEYDOWN: VK=190, Waiting=0, Repeat=N, Shifts=2 69888 .. Key not programmed -- passed on to FS 70044 KEYUP: VK=190, Waiting=0 70216 KEYUP: VK=17, Waiting=0 70855 Advanced Weather Interface Enabled 94599 Weather Mode now = Custom 94786 Weather Mode now = Theme 94786 Weather Mode now = Custom 116064 KEYDOWN: VK=80, Waiting=0, Repeat=N, Shifts=0 116064 .. Key not programmed -- passed on to FS 116205 KEYUP: VK=80, Waiting=0 118217 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 118217 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 118217 .... Condition (+Y,8) = TRUE 118217 .... Condition (-Y,0) = TRUE 118217 SendKeyToFS(0000007E=[F15], KEYDOWN) ctr=0 118217 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 118217 .... Condition (+Y,8) = TRUE 118217 .... Condition (+Y,0) = FALSE 118217 Sending WM_KEYDOWN, Key=126 (Scan code 102), Ctr=1 118326 SendKeyToFS(0000007E=[F15], KEYUP) ctr=0 118326 Sending WM_KEYUP, Key=126 (Scan code 102), Ctr=1 118420 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 118420 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 118420 .... Condition (+Y,8) = TRUE 118420 .... Condition (-Y,0) = TRUE 118420 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 118420 .... Condition (+Y,8) = TRUE 118420 .... Condition (+Y,0) = FALSE 119637 KEYDOWN: VK=76, Waiting=0, Repeat=N, Shifts=0 119637 .. Key not programmed -- passed on to FS 119777 KEYUP: VK=76, Waiting=0 123537 KEYDOWN: VK=13, Waiting=0, Repeat=N, Shifts=4 123537 .. Key not programmed -- passed on to FS 123740 KEYUP: VK=13, Waiting=0 127328 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 127328 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 127328 .... Condition (+Y,8) = TRUE 127328 .... Condition (-Y,0) = FALSE 127328 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 127328 .... Condition (+Y,8) = TRUE 127328 .... Condition (+Y,0) = TRUE 127328 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 127328 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 127453 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 127453 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 127515 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 127515 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 127515 .... Condition (+Y,8) = TRUE 127515 .... Condition (-Y,0) = FALSE 127515 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 127515 .... Condition (+Y,8) = TRUE 127515 .... Condition (+Y,0) = TRUE 132367 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 132367 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 132367 .... Condition (+Y,8) = TRUE 132367 .... Condition (-Y,0) = FALSE 132367 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 132367 .... Condition (+Y,8) = TRUE 132367 .... Condition (+Y,0) = TRUE 132367 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 132367 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 132476 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 132476 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 132601 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 132601 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 132601 .... Condition (+Y,8) = TRUE 132601 .... Condition (-Y,0) = FALSE 132601 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 132601 .... Condition (+Y,8) = TRUE 132601 .... Condition (+Y,0) = TRUE 139714 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 139714 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 139714 .... Condition (+Y,8) = TRUE 139714 .... Condition (-Y,0) = TRUE 139714 SendKeyToFS(0000007E=[F15], KEYDOWN) ctr=0 139714 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 139714 .... Condition (+Y,8) = TRUE 139714 .... Condition (+Y,0) = FALSE 139714 Sending WM_KEYDOWN, Key=126 (Scan code 102), Ctr=1 139855 SendKeyToFS(0000007E=[F15], KEYUP) ctr=0 139855 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 139855 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 139855 .... Condition (+Y,8) = TRUE 139855 .... Condition (-Y,0) = TRUE 139855 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 139855 .... Condition (+Y,8) = TRUE 139855 .... Condition (+Y,0) = FALSE 139855 Sending WM_KEYUP, Key=126 (Scan code 102), Ctr=1 145034 Button changed: bRef=0, Joy=1 (Y), Btn=1, Pressed 145034 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 145034 .... Condition (+Y,8) = TRUE 145034 .... Condition (-Y,0) = TRUE 145034 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 145034 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 145034 .... Condition (+Y,8) = TRUE 145034 .... Condition (+Y,0) = FALSE 145034 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 145174 SendKeyToFS(00000053=[S], KEYUP) ctr=0 145174 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 145299 Button changed: bRef=0, Joy=1 (Y), Btn=1, Released 145299 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 145299 .... Condition (+Y,8) = TRUE 145299 .... Condition (-Y,0) = TRUE 145299 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 145299 .... Condition (+Y,8) = TRUE 145299 .... Condition (+Y,0) = FALSE 147655 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 147655 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 147655 .... Condition (+Y,8) = TRUE 147655 .... Condition (-Y,0) = FALSE 147655 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 147655 .... Condition (+Y,8) = TRUE 147655 .... Condition (+Y,0) = TRUE 147655 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 147655 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 147795 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 147795 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 147795 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 147795 .... Condition (+Y,8) = TRUE 147795 .... Condition (-Y,0) = FALSE 147795 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 147795 .... Condition (+Y,8) = TRUE 147795 .... Condition (+Y,0) = TRUE 147811 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 149948 Button changed: bRef=0, Joy=1 (Y), Btn=1, Pressed 149948 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 149948 .... Condition (+Y,8) = TRUE 149948 .... Condition (-Y,0) = FALSE 149948 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 149948 .... Condition (+Y,8) = TRUE 149948 .... Condition (+Y,0) = TRUE 149948 SendKeyToFS(00040053=[shft+S], KEYDOWN) ctr=0 149948 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 149979 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 150057 SendKeyToFS(00040053=[shft+S], KEYUP) ctr=0 150057 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=2 150088 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 150166 Button changed: bRef=0, Joy=1 (Y), Btn=1, Released 150166 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 150166 .... Condition (+Y,8) = TRUE 150166 .... Condition (-Y,0) = FALSE 150166 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 150166 .... Condition (+Y,8) = TRUE 150166 .... Condition (+Y,0) = TRUE 155190 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 155190 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 155190 .... Condition (+Y,8) = TRUE 155190 .... Condition (-Y,0) = FALSE 155190 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 155190 .... Condition (+Y,8) = TRUE 155190 .... Condition (+Y,0) = TRUE 155190 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 155205 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 155314 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 155314 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 155439 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 155439 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 155439 .... Condition (+Y,8) = TRUE 155439 .... Condition (-Y,0) = FALSE 155439 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 155439 .... Condition (+Y,8) = TRUE 155439 .... Condition (+Y,0) = TRUE 184877 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 184877 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 184877 .... Condition (+Y,8) = TRUE 184877 .... Condition (-Y,0) = FALSE 184877 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 184877 .... Condition (+Y,8) = TRUE 184877 .... Condition (+Y,0) = TRUE 184877 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 184877 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 185017 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 185017 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 185017 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 185017 .... Condition (+Y,8) = TRUE 185017 .... Condition (-Y,0) = FALSE 185017 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 185017 .... Condition (+Y,8) = TRUE 185017 .... Condition (+Y,0) = TRUE 185017 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 185298 Button changed: bRef=0, Joy=1 (Y), Btn=1, Pressed 185298 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 185298 .... Condition (+Y,8) = TRUE 185298 .... Condition (-Y,0) = TRUE 185298 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 185298 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 185298 .... Condition (+Y,8) = TRUE 185298 .... Condition (+Y,0) = FALSE 185298 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 185376 Button changed: bRef=0, Joy=1 (Y), Btn=1, Released 185376 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 185376 .... Condition (+Y,8) = TRUE 185376 .... Condition (-Y,0) = TRUE 185376 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 185376 .... Condition (+Y,8) = TRUE 185376 .... Condition (+Y,0) = FALSE 185438 SendKeyToFS(00000053=[S], KEYUP) ctr=0 185438 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 200492 Button changed: bRef=0, Joy=1 (Y), Btn=1, Pressed 200492 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 200492 .... Condition (+Y,8) = TRUE 200492 .... Condition (-Y,0) = FALSE 200492 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 200492 .... Condition (+Y,8) = TRUE 200492 .... Condition (+Y,0) = TRUE 200492 SendKeyToFS(00040053=[shft+S], KEYDOWN) ctr=0 200492 Sending WM_KEYDOWN, Key=16 (Shift) (Scan code 42), Ctr=2 200508 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 200633 SendKeyToFS(00040053=[shft+S], KEYUP) ctr=0 200633 Button changed: bRef=0, Joy=1 (Y), Btn=1, Released 200633 [Buttons.Carenado A36 Bonanza 60th Anniversary] 1=CP(+Y,8)(-Y,0)Y,1,K83,8 200633 .... Condition (+Y,8) = TRUE 200633 .... Condition (-Y,0) = FALSE 200633 [Buttons.Carenado A36 Bonanza 60th Anniversary] 2=CP(+Y,8)(+Y,0)Y,1,K83,9 200633 .... Condition (+Y,8) = TRUE 200633 .... Condition (+Y,0) = TRUE 200633 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=2 200648 Sending WM_KEYUP, Key=16 (Shift) (Scan code 42), Ctr=1 201413 Button changed: bRef=0, Joy=1 (Y), Btn=4, Pressed 201413 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 201413 .... Condition (+Y,8) = TRUE 201413 .... Condition (-Y,0) = FALSE 201413 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 201413 .... Condition (+Y,8) = TRUE 201413 .... Condition (+Y,0) = TRUE 201413 SendKeyToFS(0000007D=[F14], KEYDOWN) ctr=0 201413 Sending WM_KEYDOWN, Key=125 (Scan code 101), Ctr=1 201537 SendKeyToFS(0000007D=[F14], KEYUP) ctr=0 201537 Sending WM_KEYUP, Key=125 (Scan code 101), Ctr=1 201662 Button changed: bRef=0, Joy=1 (Y), Btn=4, Released 201662 [Buttons.Carenado A36 Bonanza 60th Anniversary] 7=CP(+Y,8)(-Y,0)Y,4,K126,8 201662 .... Condition (+Y,8) = TRUE 201662 .... Condition (-Y,0) = FALSE 201662 [Buttons.Carenado A36 Bonanza 60th Anniversary] 8=CP(+Y,8)(+Y,0)Y,4,K125,8 201662 .... Condition (+Y,8) = TRUE 201662 .... Condition (+Y,0) = TRUE 205110 KEYUP: VK=13, Waiting=0 205219 KEYUP: VK=18, Waiting=0 206155 KEYDOWN: VK=27, Waiting=0, Repeat=N, Shifts=0 206155 .. Key not programmed -- passed on to FS 206171 Sim stopped: average frame rate for last 140 secs = 21.7 fps 218323 System time = 16/12/2013 20:38:42, Simulator time = 15:37:26 (23:37Z) 218323 *** FSUIPC log file being closed Average frame rate for running time of 140 secs = 21.7 fps Memory managed: 60 Allocs, 60 Freed ********* FSUIPC Log file closed *********** Thanks, Robert Link to comment Share on other sites More sharing options...
Pete Dowson Posted December 17, 2013 Report Share Posted December 17, 2013 Pete, here are the files you asked for. I used the default Carenado A36 for these tests since I no longer have the A2A C172 installed for it didn't work very well with P3D v2. The problematic behavior is the same with either plane. Only the custom command works. None of the commands in the Default Button section work. There are no assignments in the default Buttons section! It is empty. Look: [buttons] ButtonRepeat=20,10 [AutoSave] ... The logs show the same. I'm afraid FSUIPC cannot apply assignments which don't exist! Pete Link to comment Share on other sites More sharing options...
macwino Posted December 17, 2013 Author Report Share Posted December 17, 2013 Pete, it appears that when I copied over my settings from the FSX fsuipc.ini, I didn't notice that the default ini for P3D already had a Buttons section. So I wound up with 2 Buttons sections and fsuipc looked at the first one in the ini and found nothing. Later in the ini is my default FSX Buttons section that wasn't being read. [Buttons] // Default - use for all aircraft 1=CP(+Y,8)(-Y,0)Y,1,K83,8 ; S 2=CP(+Y,8)(+Y,0)Y,1,K83,9 ; Shift+S 3=RY,3,C65615,0 ; Elevator Trim Up 4=RY,2,C65607,0 ; Elevator Trim Down 5=CP(+Y,8)(+Y,0)Y,3,K189,8 ; Zoom Out 6=CP(+Y,8)(+Y,0)Y,2,K187,8 ; Zoom In 7=CP(+Y,8)(-Y,0)Y,4,K126,8 ; center Track IR 8=CP(+Y,8)(+Y,0)Y,4,K125,8 ; toggle Track IR 9=CP(+Y,8)(-Y,0)Y,5,C66530,0 ; Eyepoint Reset (Control+Space Bar) 10=CP(+Y,8)(+Y,0)Y,5,C65561,0 ; Pause Toggle (P) 11=CR(+Y,8)Y,18,C65880,0 ; Heading Bug Left (Dec) 12=CR(+Y,8)Y,19,C65879,0 ; Heading Bug Right (Inc) Thanks for pointing this out. I will make the necessary corrections. Robert Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now