tonygoole Posted October 18, 2015 Report Share Posted October 18, 2015 Hi all I'm using the latest paid version of fsuipc with my pmdg 737ngx and p3d v2.5 The problem I have if I try to change frequency or altitude for example the mouse buttons only increase where normally left would increase and right would decrease. Anyone tell me how to sort this please Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 18, 2015 Report Share Posted October 18, 2015 Hi all I'm using the latest paid version of fsuipc with my pmdg 737ngx and p3d v2.5 The problem I have if I try to change frequency or altitude for example the mouse buttons only increase where normally left would increase and right would decrease. Anyone tell me how to sort this please Why do you post here? Do you think it is anything to do with FSUIPC? Have you checked the PMDG forums? Pete Link to comment Share on other sites More sharing options...
tonygoole Posted October 18, 2015 Author Report Share Posted October 18, 2015 Everything worked fine until I set up fsuipc Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 18, 2015 Report Share Posted October 18, 2015 Everything worked fine until I set up fsuipc FSUIPC does nothing with Mouse buttons, except optionally the centre one if you enable Mouse Look or one of the other two mouse use options on the Miscellaneous page. It sounds like something else is interfering. If you think it must be an FSUIPC setting, somehow, then try removing or renaming your FSUIPC4.INI file before loading, so that it sets all options to default. Pete Link to comment Share on other sites More sharing options...
tonygoole Posted October 18, 2015 Author Report Share Posted October 18, 2015 Ok thanks Pete. Link to comment Share on other sites More sharing options...
tonygoole Posted October 18, 2015 Author Report Share Posted October 18, 2015 Pete I renamed that file and all works perfect now. Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 18, 2015 Report Share Posted October 18, 2015 Pete I renamed that file and all works perfect now. So you have some setting, or maybe a Lua plug-in, which is doing it. With Lua plug-ins you can do whatever you want with the Mouse, but those are user options and need user action to install and enable. If you like, past your (now) renamed INI file into a reply here. Pete Link to comment Share on other sites More sharing options...
tonygoole Posted October 20, 2015 Author Report Share Posted October 20, 2015 hi pete many thanks heres a copy [General]UpdatedByVersion=4947History=CEO5IHC4UKENH7H2E5ZKOAxesWrongRange=NoTCASid=FlightTCASrange=40AxisCalibration=NoDirectAxesToCalibs=NoShowMultilineWindow=NoSuppressSingleline=YesSuppressMultilineFS=YesAxisIntercepts=NoDontResetAxes=NoInitDelay=0GetNearestAirports=NoOOMcheck=YesOOMcheckInterval=10WeatherReadFactor=2WeatherRewriteSeconds=1CustomWeatherModify=NoSimConnectStallTime=1InitialStallTime=10NormalStallTime=1LuaRerunDelay=66InitDelayDevicesToo=NoNewInterceptTextMenu=NoUseSystemTime=NoUseMidMouseBtn=YesMouseWheelMove=NoMouseWheelTrim=NoMouseWheelTrimSpeed=1JoystickTimeout=20PollGFTQ6=YesBlankDisplays=NoFixControlAccel=NoFixMachSpeedBug=NoDeleteVehiclesForAES=YesAutoScanDevices=YesVisibilityOptions=NoOneCloudLayer=NoCloudTurbulence=NoCloudIcing=NoGenerateCirrus=NoSuppressCloudTurbulence=NoMaxIce=3MinIce=-1UpperWindGusts=NoSuppressWindTurbulence=NoSuppressWindVariance=NoWindTurbulence=NoTurbulenceRate=1.0,5.0TurbulenceDivisor=20,20,40,40SuppressAllGusts=NoMaxSurfaceWind=0WindLimitLevel=200WindDiscardLevel=400WindAjustAltitude=NoWindAjustAltitudeBy=2000SmoothBySimTime=NoWindSmoothing=NoWindSmoothness=2WindSmoothAirborneOnly=YesPressureSmoothness=0TemperatureSmoothness=0DisconnTrimForAP=NoZeroElevForAPAlt=NoThrottleSyncAll=NoWhiteMessages=NoShowPMcontrols=NoSpoilerIncrement=512MagicBattery=NoRudderSpikeRemoval=NoElevatorSpikeRemoval=NoAileronSpikeRemoval=NoReversedElevatorTrim=NoClockSync=NoClockSyncMins=5ClearWeatherDynamics=NoOwnWeatherChanges=NoTimeForSelect=4LoadFlightMenu=NoLoadPlanMenu=NoPauseAfterCrash=NoBrakeReleaseThreshold=75SaveDataWithFlights=NoZapSound=fireworkShortAircraftNameOk=SubstringUseProfiles=YesEnableMouseLook=NoDelayedMouseLookZoom=NoConsole=NoFSVersionUsed="Lockheed Martin® Prepar3D® v2",2.5.12946.0SimConnectUsed=2.5.0.0 [WideServer]WideFSenabled=Yes [JoyNames]AutoAssignLetters=No0=SideWinder Joystick0.GUID={32695730-21C0-11E5-8001-444553540000}1=Saitek Pro Flight Rudder Pedals1.GUID={CE29B690-2226-11E5-8001-444553540000} [Axes]PollInterval=10RangeRepeatRate=100=0X,256,D,1,0,0,01=0Y,256,F,65694,0,0,02=0S,256,D,4,0,0,03=1X,256,F,66387,0,0,04=1Y,256,F,66388,0,0,05=1R,256,F,65696,0,0,0 [buttons]PollInterval=25ButtonRepeat=20,107=P0,0,K88,88=H0,2,K65,89=R0,3,K83,812=P0,7,C65607,013=P0,5,C65759,0 [AutoSave]Next=1Interval=60Files=10SaveOnGround=NoAutoSaveEnabled=No [GPSout]GPSoutEnabled=No [GPSout2]GPSoutEnabled=No [sounds]Path=C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Sound\Device1=Primary Sound DriverDevice2=Speakers (Realtek High Definition Audio)Device3=Realtek Digital Output (Realtek High Definition Audio)Device4=1 - S24D300 (AMD High Definition Audio Device) [JoystickCalibration]AllowSuppressForPFCquad=YesExcludeThrottleSet=YesExcludeMixtureSet=YesExcludePropPitchSet=YesSepRevsJetsOnly=NoApplyHeloTrim=NoUseAxisControlsForNRZ=NoFlapsSetControl=0FlapDetents=NoReverserControl=66292Reverser1Control=66422Reverser2Control=66425Reverser3Control=66428Reverser4Control=66431MaxThrottleForReverser=256AileronTrimControl=66731RudderTrimControl=66732CowlFlaps1Control=66162CowlFlaps2Control=66163CowlFlaps3Control=66164CowlFlaps4Control=66165SteeringTillerControl=0MaxSteerSpeed=60PropPitch=-16380,16380Mixture=-16380,16380LeftBrake=-16380,16380/16RightBrake=-16380,16380/16Throttle1=-16380,-512,512,16380Throttle2=-16380,-512,512,16380Throttle3=-16380,-512,512,16380Throttle4=-16380,-512,512,16380Mixture1=0,8192,8192,16380Mixture2=0,8192,8192,16380Mixture3=0,8192,8192,16380Mixture4=0,8192,8192,16380PropPitch1=0,0,512,16380PropPitch2=0,0,512,16380PropPitch3=0,0,512,16380PropPitch4=0,0,512,16380ElevatorTrim=-16380,-512,512,16380Spoilers=-16380,16380Flaps=0,16380/8CowlFlaps1=0,16380CowlFlaps2=0,16380CowlFlaps3=0,16380CowlFlaps4=0,16380PanHeading=-16380,-512,512,16380PanPitch=-16380,-512,512,16380PanTilt=-16380,-512,512,16380SteeringTiller=-16380,-512,512,16380Reverser1=-16380,16380Reverser2=-16380,16380Reverser3=-16380,16380Reverser4=-16380,16380Aileron=-16380,-512,512,16380Elevator=-16380,-512,512,16380Throttle=-16380,16380 [Keys]1=78,8,65615,02=77,8,65860,0 [MacroFiles]1=m1 Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 20, 2015 Report Share Posted October 20, 2015 hi pete many thanks heres a copy Well, there's nothing there I can see which could possibly affect mouse operations. This worried me though: PropPitch=-16380,16380 Mixture=-16380,16380 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 Throttle1=-16380,-512,512,16380 Throttle2=-16380,-512,512,16380 Throttle3=-16380,-512,512,16380 Throttle4=-16380,-512,512,16380 Mixture1=0,8192,8192,16380 Mixture2=0,8192,8192,16380 Mixture3=0,8192,8192,16380 Mixture4=0,8192,8192,16380 PropPitch1=0,0,512,16380 PropPitch2=0,0,512,16380 PropPitch3=0,0,512,16380 PropPitch4=0,0,512,16380 ElevatorTrim=-16380,-512,512,16380 Spoilers=-16380,16380 Flaps=0,16380/8 CowlFlaps1=0,16380 CowlFlaps2=0,16380 CowlFlaps3=0,16380 CowlFlaps4=0,16380 PanHeading=-16380,-512,512,16380 PanPitch=-16380,-512,512,16380 PanTilt=-16380,-512,512,16380 SteeringTiller=-16380,-512,512,16380 Reverser1=-16380,16380 Reverser2=-16380,16380 Reverser3=-16380,16380 Reverser4=-16380,16380 Aileron=-16380,-512,512,16380 Elevator=-16380,-512,512,16380 Throttle=-16380,16380 You appear to have gone through virtually all the Calibration pages clicking the "Set" button. So FSUIPC is trying to process every single analogue control which it can possibly calibrate, even though there is no way you have that many axes assigned or even installed. All of them, even the ones you are using, have default values, so even though you've done this you've not actually tried to calibrate. I suggest that, as a start, you delete all those lines above before loading FS. THEN, for the axes you do have assigned (probably aileron, elevator, rudder and throttle) go back into the Calibration tab, and calibrate them properly (there are numbered steps in the FSUIPC User Guide). [LATER] Just for clarification, assuming you have disabled controllers in P3D as you should when assigning in FSUIPC, you have these assignments: 0=0X,256,D,1,0,0,0 Ailerons (direct to FSUIPC) 1=0Y,256,F,65694,0,0,0 Elevator (via P3D) 2=0S,256,D,4,0,0,0 Throttle (direct to FSUIPC) 3=1X,256,F,66387,0,0,0 Left Brake (through P3D) 4=1Y,256,F,66388,0,0,0 Right Brake (through P3D) 5=1R,256,F,65696,0,0,0 Rudder (through P3D) Oddly you have chosen the old FS98-compatible FS controls for Elevator and Rudder, but the modern AXIS_ controls, the same ones FSX and P3D use, for the left and right brakes. Really you'd be better off being consistent. Either use "direct to FSUIPC calibration" controls for all of them, or "AXIS ..." FS controls for all of them. Pete Link to comment Share on other sites More sharing options...
tonygoole Posted October 20, 2015 Author Report Share Posted October 20, 2015 Hi Pete many thanks for your time. Sorry I think I've messed up because apparently pmdg737 will only allow p3d to control throttle and I've assigned p3d to do throttle and enabled controllers again. Can you clarify if pmdg737 will allow throttle control thru fsuipc. Many thanks Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 20, 2015 Report Share Posted October 20, 2015 Hi Pete many thanks for your time. Sorry I think I've messed up because apparently pmdg737 will only allow p3d to control throttle and I've assigned p3d to do throttle and enabled controllers again. Can you clarify if pmdg737 will allow throttle control thru fsuipc. Many thanks I think so, but only using the FS "Axis Throttle" control assignments, and with no FSUIPC calibration. Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now